UWL list showing the workitems wrongly.
Hi ,
In the UWL list the sometimes the workitem is displayed with wrong information.
If I have 4 work items which are expected to be displayed in the UWL list, Instead the UWL shows three work items.
The work item combines the decription of the other work item and shows the wrong information.
E.g. I have three columns in the UWL list Item description ( this is the description of work item), name and status.
The work item
Item Description Name Status
1. Test results of 1 ABCD Ready for acceptance
2. Test result of 2 MNGK Approved
The UWL instead of above results, shows the one record like below
1. Test results of 1 MNGK Ready for acceptance.
Has anyone faced this problem before? any pointers for this?
Thanks in adance.
Did you try to activate [Enabling Delta Pull Mechanism|http://help.sap.com/erp2005_ehp_04/helpdata/DE/eb/101fa0a53244deb955f6f91929e400/frameset.htm]
Similar Messages
-
To create a sample pick list showing the position of Bar codes
Dear All,
I need some guidance to create a sample pick list for Print. Its a bar-code printing with a shipment number which can be scanned for generating the pick lists. Tried still not able to create the sample pick list.
Regards,Hi Ramesh,
To be more clear on this here is the scenario: -
The Shippers have to key in all shipment numbers two times on UPS, LTL, & TRUCKLOADS. They have to key in the shipment numbers two times: - First to physically pull the units and then after all the units are pulled, they have to key in the shipment number again to get the packing or picking list to print.
To avoid this above process: -
If we could get the shipment number in a bar-code on the pick ticket above or beside the CURRENT HUMAN READABLE NUMBER So that the shipment number can be scanned instead of keying in again.
For this scenario I want to create a pick list showing the position of the Bar-code after I change the printing logic through a smartform. For this I wanted to create a pick list to make the end user have a better visibility. Basically I want to create some test data. Any clues on this.
Regards,
Edited by: SAURYASEN on Sep 15, 2010 12:26 PM -
Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)
Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regardsuse the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI. -
Po list showing the total amount with advances given & open GR quantity
Hi Gurus,
My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned.
I hv tried in ME80FN, ME2N, ME2L ME2M..etc and all other reports but the system is showing the same with the line items. Kindly advise.
Regds
Prashant BijutkarPrashant,
All three informations will not be available in one report(gross total amount not with the line items and the advances rendered to them & its open GR quantity against total qunatity mentioned).
You have to dovelop this report. please take help from technical consultant.
One more thing the open GR quantity will always at PO line item level not at header level.
Regards,
Manish -
UWL donu00B4t show the sender's name
Hello Masters:
I´m sending workflow tasks to the UWL. The tasks are showing ok in the portal, but these don't show the sender's name in the "From" column. This column appears empty.
I have two ECC systems configured to send tasks to the UWL, but only one of them have this problem. The tasks from the second system show the user's name who sent the task.
Does anybody know what could be happen?
Thank you.Hi,
Populate the name of the person who triggered in WF_INITIATOR and bind it to Task element.
Workflow --> Task
&_WF_INITIATOR& --> &_WF_INITIATOR&
Hope this solves the issue.
Regards
Narin -
I purchased a complete album, but most songs are only about a minute in duration rather than their actual lengths. The times showing indicate the full song was downloaded, but in reality, its like listening to a sample. I want to get entire songs, but the itunes list shows it as downloaded, so it does not seem to give me the option to download again. I sure would like to get what I paid for. Any suggestions?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
Hi,
My requirement is whenever approver approves SC and PO gets created and SC creator receives goods. He has to confirm goods receipt.That time he should get a mail in his outlook using a batch job informing him that GR approval is pending in his inbox.
Problem here is i want all the workitems which are pending for GR since last run of the batch job.
Can anyone help how to acheve this.
Thanks in advance.
Regards,
RushikeshHello
turn on the alerting for the Confirmation WFL. You can do that in the PTFC or SWDD tx.
SZD -
My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?
just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine -
How do I get the truetype font to show the actual font in the font list
I am trying to find an option somewhere in Yosemite, where I can elect to have the font list show the actual font face in list format. It has been there prior to the Yosemite update, but now the list shows all fonts in the same font face.
ohyes wrote:
once again you've saved the day - thank you so much - ohyes (Barb)
Good computing ohyes! -
How can i show the first item in the list as selected item
Aslam o Alikum (Hi)
Dear All
How can i show the first item in the list as selected item when user click on the list. Right now when user click the list the list shows the last item in the list as selected or highlighted. Furthermore if the list item have large no of value and a scroll bar along with it then the list scroll to last item when user click it with mouse. I want that when user click the list item with mouse list should show the first item as highlighted.
Take Care
Allah HafizHi!
You can set list "initial value" using When-Create-Record trigger.
I.g.
:<Block_name>.<list_item_name> := Get_List_Element_Value('<Block_name>.<list_item_name>', 1); -
Spotlight lists items and shows preview images. BUT what about showing the path/location address of an item in my computer.
Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS X 10.5 was more useful.
Old OSX Spotlight function automatically displayed path/location within the machine: e.g. desktop/folder/sub-folder/item.
Can I make Spotlight show the path?Press option-command and the path is displayed at the bottom of the little preview window. Press command-return and the enclosing folder opens.
-
In Mail, the "From" line shows the wrong name associated with my email ID. I've looked over preferences and account information but have not found where I can update it.
There isn't an email address associated with the contact name who appears as the "from" in Mail. It used to be a shared email address and I already had updated the contact to list only the phone number in case that was causing the problem.
-
AirDrop showing the wrong name and picture with iOS 7
AirDrop is showing the wrong name and picture on my wife's phone....It is showing my name and picture. She has an iPhone 5 and I just updated her to iOS7 about an hour ago, same time as I did mine. Is it because we are connected with the same Apple ID and if so, how do I fix it? She is annoyed by it and not seeing where I can change it in the settings is beginning to annoy me. Help!
I don't think that's the issue. I'm having the same problem. My wife, my son, and I all use the same Apple ID, but we have different email addresses and phone numbers for facetime and imessage (we've never had an issue with imessage or facetime). Today, I updated my phone and ipad to ios 7 and tried to experiment with airdrop. On both devices it showed my son's name. Then my son updated his ipad and we tested airdrop again. His ipad shows up on my phone and ipad with his name as well. The email address that I use for Apple ID is not associated with him on any device. His name is not listed on our Apple ID account. One of them shows his photo that he uses for his facebook profile, but the other's just have a gray circle with his first initial. I'm hoping it's just a bug that will get fixed soon, but if anyone knows a fix, please share.
-
Netweaver - agent assignment to the workitem in UWL
Hi ,
1.How is the Standard task of sap r/3 bound to the workitem(which shows the web dynpro java screens) in Universal Worklist?
2.How the agent of this workitem is decided/assigned?
Thanks and Regards,
HemalataHello,
Good, Extended Notifications should always be used (where available) instead of RSWUWFML2.
You say:
"I am sending my workitems into outlook using the extended notification. I can aopprove and reject the workitems from the mail."
Could you say how you did that - approve and reject from the mail? Are there buttons in the email?
Other people have been asking this in the forum.
You also say:
"However, i need a functionality where user can click on the logon link and approve/ reject from workitem."
Why would anyone want to go to the workitem if they can approve/reject from the mail?
In the link to the UWL, does it include the workitem number?
regards
Rick Bakker
Hanabi Technology -
Always show the attachment part in a uwl task?
Hi community,
I think the topic says all. I always want to show the attachment part of a task.
Any way to customize that? Maybe dynamically based on some conditions?
Many thanks,
TobiasHmmm, I think I cannot help here. Maybe it is about the version?
As far as I remember for me the attachments have been always visible directly and I 've been able to directly click them. I hope we are speaking about the same thing: In UWL under the work item list in the work item description part, the attachments (for example the business objects) are visible.
Regards,
Karri
Maybe you are looking for
-
This is possible in InDesign CS5.5 using Folio Builder (DPS).
Hi DPS Experts, I am new to this DPS work flow. I am using InDesign CS5.5. I have the question? This is possible to create the apps for the below mentioned web link. http://www.spanish-real-estate.co.uk/ The website is in joomla and the domain is www
-
If I print from Excel, I get a fixed number of columns irrespective of the size of the window. But when I print a JTable, what I see on paper is dependent on the table size. If I run the following code, I can print all 7 columns in the table on 1 pag
-
Hi All, I want to specify in the repeat_interval that the scheduler for this job has to be executed on the second of every month at 8 pm . I have been racking my brains but nothings coming out. Any suggestions??
-
How to log and transfer in FCP X
The Share option in Final Cut Pro X does not offer the possibility to transfer clip to a DVCam drive. Can some one tells how to proceed ?.
-
Usb hard drive - slow write speed
Hey all you mac savvy people out in mac land. I got the airport extreme n edition for christmas and I set the thing up at the 5Ghz N speed (300Mbps) and all is happy. then I connected my external usb 2.0 hard drive to begin using that as a network st