UWL Notification is not getting displayed under Notificattion TAB

Hi experts,
I  have a requirement to Display the notification Under "NOTIFICATION" tab in UWL.
For that I followed the below steps:
1)  Deployed required SDA as well as par file.
2) Created the new connector picking the Somic Connector from the drop down and requires system alies name
3) Restart the EP server
Still notification is not coming even through it is present in back-end
When I checkedthe Connection status  Iview  by clicking the display connection ,the Som connctor is not been displayed.
Can you please give any advice, what exactly the issue related to connector?
Thanks,
JB
Edited by: jyoti behera on May 16, 2011 9:30 PM
Edited by: jyoti behera on May 16, 2011 9:31 PM
Edited by: jyoti behera on May 17, 2011 7:23 AM
Edited by: jyoti behera on May 17, 2011 6:11 PM

Hi Jyoti,
Can I mark this thread as closed for you?  If so do you first want to share how you solved the issue so other individuals who are searching the forum can also find the advice helpful? 
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
http://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

Similar Messages

  • Support messages not getting displayed in Messages Tab - Solar01/02

    Hi,
    I am having an issue in displaying the support messages under the message tab of Solar01 and Solar02. If I try to create a new message, the notification pops up and also gets saved. But the message does not get displayed under the tab.
    I can find that the message is properly created through transaction monitor.Even if I try to manually assign the support message number in Messages tab it gives an error saying the number does not exist.We are using SOLMAN 4.0 SP 11.
    Please help. Points will be awarded for useful answers.
    Regards,
    J.Prabananth

    Dear Prabanath,
           I am not too sure you will be able to assign numbers to support messages. Run the report CRM_DNO_MONITOR and get the full number from the report and insert the ticket number in issue messages tab and click on save and go back one screen, it will ask you if you want to save, select yes.
       That worked for me. Recently I have strugged to resolve this. We are on Solman 4.0 SP12. Check if you have all necessary permissions for you and do you have any thing in sm21 or st22 by any chance if the issue is related to support pack ?
         Let me know if there are any issues. I might be able to help you.
    N

  • Entitlements not getting displayed in Entitlements Tab - OIM11gR2

    Hi Experts,
    I am trying to provision entitlements to users by requesting entitlements. When i successfully provision entitlements, the entitlement is getting displayed in accounts tab, child form. But the same is not getting displayed in entitlements tab of the user.
    Please kindly guide me
    regards

    Verify below steps:
    1. Marking Entitlement Attributes on Child Process Forms
    http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/appinstance.htm#CHDFFEEE
    If you have already marked it then fine. else create new version of form and add property Entitlement=true. activate this . make sure the parent form having the latest child form. goto parentform->child tab and verify the child form version.if not create new version for the parent form and activate this version.Automatically it will pick the latest child form
    2. Run Below scheduled task
    a. Entitlement List scheduled task.
    b. Entitlement Assignments scheduled task

  • Planning is not getting displayed under shared services

    I have installed essbase,Bi Plus and Planning.Esbase and Bi Plus were configured and were successful.I have completed the configuration of planning also the product instance and Data source step.
    When i log on to shared services i am not seeing the planning and also the "Navigate-->Application" menu is missing in the workspace.
    I have installed 9.3.1
    Thanks,
    Mugundhan

    Hi John,
    Thanks for the help.I missed to furnish that i have created app using the app wizard.I dont know how this issue got fixed, i have restarted the servers and now i can see the planning app under shared services but still i am not getting the planning menu in the workspace. I have provisioned the full rights to the login id. I think i am missing some point here.
    Thanks,
    Mugundhan

  • Child Elements are not getting displayed under Parent node in Portal

    Hi All,
    When I was Navigating to system administration and then to transport node in detailed navigation there the elements  with EXPORT and IMPORT has to be displayed , which is not happening in my case . It shows as Loading .This is for all the nodes in the detailed navigation .
    Responses Would be appreciated.
    Thanks.
    Venkat.

    Hi Venkata Krishna,
    please see the service market place in the future for issues like this and as well in forums.
    anyhow please have a look at the SAP Note
    Note 976331 - receiving "Loading" message for the Detailed Navigation
    This will answer your needs.
    Cheers-
    Pramod

  • Table PA0045 is getting updated but data is not getting displayed in Infty

    Hi,
             When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
              But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
    Regards,
    Jyoti

    Check if there is proper data to be shown in the tabstrip.
    EX.. Loan Amount Granted in the Tabstrip Basicdata ...

  • Getting value under price tab in sales order

    hi all,
    when i am creating a sales order i am getting the values in the condition tab according to pricing procedure, but some of the values are not getting displayed under the price tab.
    what configuration i have to do in the pricing procedure to get values under the price tab..
    Thanks and Regards
    shanto aloor

    Hi Shanto
    Do you mean
    1.Some of the condition types itself are not appearing  or
    2.Condition types appear but the condition records are not appearing against the condition types
    Please try following
    1.In create condition types screen, check Source System column setting.
    2.Check if the access sequences are assigned to these condition types. If access sequences are not
       assigned to the condition types then the condition types and the values against these condition types
       are not displayed automatically but are required to be entered manually.
    Regards
    Dinesh

  • Workitems are not getting displayed in UWL

    Hi All,
             We have deployed ESS/MSS Business packages in our system. Also configured UWL to display workitems in portal. But when testing leave request, leave request workitems are not getting displayed in portal as UWL. Any help on this will be appreciated.
    Thanks,
    Krish.

    Hello,
    have created some new users and done with the leave request, it comes to backend inbox, but not
    visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
    Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
    You can see what data source your portal is using by going to
    Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
    If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
    Here you can check if your user is contained in the data source:
    Portal --> User Administration --> choose the right data source --> put in the username --> search
    Please check if your users are correctly created.
    Regards,
    Iris

  • Work item not getting displayed in the portal

    Hi  experts,
    We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
    In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
    If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of  one of the tasks 17900101 which we are using for approving the form]
    We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
    Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

    <ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="ApproveFormApp"/>
                <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
    Task TS17900101 and visualization type is JavaWebDynpro
    APPLICATION     ApproveFormApp
    PACKAGE     sap.com/pa~asr~formstep

  • Links not getting displayed in the contextual panel

    Hi,
    I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
    DATA TAB  TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
      DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
      LINE-TEXT    = 'User Manual'. "#EC NOTEXT
      LINE-ENABLED = ABAP_TRUE.
      APPEND LINE TO TAB.
      LINE-TEXT    = 'Logout'. "#EC NOTEXT
      LINE-ENABLED = ABAP_TRUE.
      APPEND LINE TO TAB.
      NODE->BIND_TABLE( TAB ).
    Also in the context of the view I have created a node and supplied the method  'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
    Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values.  Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
    Regards,
    Ashutosh

    Hi,
    Can you elaborate ' ItemEnable property of ViewSwitch'.
    I have already bound the enable property of the panel with a context attribute of type wdy_boolean  but it is still not working. 
    Regards,
    Ashutosh

  • Hier Node with character (e.g. 11100A) is not getting displayed in report

    Hi All,
    I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
    Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
    While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
    Plz help me.
    Regards,
    Sandeep

    Sandeep,
    Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
    In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
    -1100
    -11100A etc
    Or is it a range i.e.
    Node 1
    1000 : 11100A
    Regards
    Gill

  • JSP is not getting displayed in add portlet repositery

    Hi,
    I have registered two servlet in provider.xml and I was able to
    view that servlet as a portlet in add portlet repositery.
    After that I wanted to add one more JSP as portlet under same
    provider. So I have kept JSP in same directory where servlet is
    kept. I have added JSP as portlet in Provider(i.e. provider.xml)
    and given appPath and appRoot for that JSP. Whenever I am trying
    to view my provider by giving following URL
    http://servername/servlet/myprovider
    I am getting message -
    Congratulations! You have successfully reached your Provider's
    Test Page.
    in same page I am able to view my all portlets. in that list I
    am able to view my JSP as a portlet.
    Now I want to add JSP portlet in my page at that time that JSP
    portlet is not getting displayed in add portlet repositery.
    Can anybody tell why JSP is not getting displayed in portlet
    repositery ? What should I do to get it displayed in portlet
    repositery ?
    Thanks in advance.
    Biren

    You have to refresh the Provider. They are a couple of ways to
    do it.
    1. Take a look at the release notes for PDK-Java.
    http://portalstudio.oracle.com/servlet/page?_pageid=468&_dad=ops&
    _schema=OPSTUDIO
    It mentions and auto reload feature that will refresh the
    provider on the PDK-Java side when you make changes to the
    provider.xml. When you add portlet, you simply refresh the
    repository in portal and add the new portlet to a page.
    2. If you do not have the auto_reload parameter, you simply need
    to refresh manually.
    a. After updating the provider.xml, restart the HttpServer where
    your PDK-Java Provider is located.
    b. Refresh the Portlet Repository
    Both these do the same thing, and should solve your problem
    Sue

  • PF No. Not getting displayed in payslip

    Dear All,
    The PF No. is not getting displayed in the payslip. In pe51 transaction for the form created under Single fields i can see the table maintained as p0587as Table and Table field as EEPFM. The master data is maintained for this employees in IT 0587 and the dates are also maintained correctly but this specific data of PF number is not reflecting in cluster tables. PC00_m40_clstr - > EPF table.
    In EPF table i can see the trust ID but the PF number is not getting displayed..
    Could anyone of you suggest how to proceed further..
    Regards,
    Srikanth

    Hi Rohith,
    Thanks for your response. We are currently on ECC 604 and SP Level 45.
    As mentioned earlier here the issue is with PF number. As far as Pan # is concerned we don't have any issue.
    The PF number is not getting read in the payroll log itself however it is reading Trust ID field. The data is maintained in IT 0587 for all employees and in PE51 both table and table field are mapped correctly for Provident Fund number Single field. Could anyone suggest and let us know why the PF number is not getting fetched in the payroll log..
    Regards,
    Srikanth

  • Graph image not getting displayed when navigating from another page

    Hi All,
    I have implemented a line graph in ADF with "dept no"(in x-axis) and "avg sal"(in y-axis). When I am going to run only this graph page, its showing proper data.
    But,when I am trying to navigate from another jspx page (which is under some package) to this graph page, the graph is not getting displayed(graph image is not getting displayed).
    In my project I am following package structure for jspx and backing bean.
    Please help me to solve this problem.
    Thnx,
    Abhijit

    Abhijit,
    A couple of things:
    1). There's really not enough information provided to answer your question - have you tried doing some debugging?
    2). You may have beer luck on the [url http://forums.oracle.com/forums/forum.jspa?forumID=381&start=0]11g forum
    John

  • QS41_Code are not getting displayed

    Dear Experts,
    Scenario is,
    1.     T-Code QS41
    2.     Under code groups (of any catalogue) certain codes have been created.
    3.     The same entries can be viewed through tables QPCT and QPCD.
    4.     Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
    5.     We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
    6.     The message that we got is No entries found that match selection criteria Message no. SV004
    Few more inputs,
    u2022     Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
    u2022     Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
    We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
    Best Regards,
    Anand Rao

    Hello Anand
    I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
    please look into the below link also for reference
    Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
    Regards
    Gajesh

Maybe you are looking for