UWL Runtime Error in EP60 SP2

Hi,
I am getting the following Error when i try to access the Universal Worklist Component,
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.netweaver.bc.uwl.uwl_page/com.sap.netweaver.bc.uwl.uwl_iview
Component Name : com.sap.netweaver.bc.uwl.ui.UWL
com.sap.netweaver.bc.uwl.config.UWLView: method getUniqueViewId(Ljava/lang/String;Ljava/lang/String;)Ljava/lang/String; not found.
Exception id: 08:11_06/12/04_0112
See the details for the exception ID in the log file
Has someone come across this problem and what is ths solution?
Thank you
arun
Message was edited by: Arun Prasad

I am having the same error, were you able to fix this error ?

Similar Messages

Portal Runtime Error when opening Webflow workitem in UWL

Hi,
I have recently configured the UWL to pick up workitems from SAP workflow on a background system. The workitems are appearing OK in the Task folder. However, when I try to open a workitem by double-clicking on it, I get the following error:
Portal Runtime Error
An Exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:33_30/09/10_0010_24209150
Refer to the log file for details about this exception.
NB. This only seems to happen for items that would be shown via the SAP GUI (E.g. a Confirming a task completion or user decision). The workitem runs OK if it is for a task that is visualised as a Web Dynpro app and specified in transaction SWFVISU.
I have not configured Delta Refresh options in the Workflow Administrator so do not know if this is a possible reason (I assumed that this would not cause a problem and would simply mean that refreshes only occur once every 60 seconds). Any help would be greatly appreciated. I am fairly new to Portal & UWL I would also be grateful if someone could tell where I can find the relevant log files referenced in the original error.
Regards
Simon

Hey Simon,
Welcome to UWL :). Portal Runtime Errors in UWL don't always signify that there is a UWL issue. This could be a permissions problem, etc. I'm not sure what version of the portal that you are using. But here is a little trick for you when checking logs...you can enter in the following: irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.admin.logviewer.default
and check the log file with the id that was given in the error.
Exception ID: 05:33_30/09/10_0010_24209150 is your exception id. Search for the log files in the default trace and see what the exact error message is. If you can post this here it would be great.
The log files can be found in the following location:
/usr/sap/<SID>/JC<InstanceNumber>/j2ee/cluster/
server<number>/log
or by entering the URL that I mentioned above.
Please let me know in the next reply what the portal version is:
You can get this information by doing the following:
a. log on to the portal
b. backspace out the irj/portal section of the URL
c. click enter.
d. You are now at the J2EE administration page.
e. Next, click on the system information link
f. Please click on the all components link
g. Please attach this information to the message.
I am interested mostly in the UWLJWF component but if you can attach the full software component info to this post that would be great...
Please note, that note number 1133821 is an important note that is needed in the UWL. Did you maintain your RFC destination accordingly?
Here is some additional information to help you too since you are new to UWL:
[UWL Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq]
[UWL Forums|SAP Enterprise Portal: Application Integration;
[Business Task Management|http://help.sap.com/saphelp_nw70/helpdata/en/9e/ccf62fff3e4a45a634e592dabb45d5/frameset.htm]
[Using Universal Worklist|http://help.sap.com/saphelp_nw04s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm]
[JavaDocs UWL API|http://help.sap.com/javadocs/NW04S/current/uw/overview-summary.html]
I hope that you find this information useful!
Best Regards,
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Portal Runtime Error while executing GP tasks from UWL

Hi all,
I am trying to create a process in Guided Procedures.
The activities involved in this process include calling some standard R/3 transactions.
For this, I first created Portal Iviews of the SAP R/3 transactions involved. Then In GP Design time, I created corresponding callable objects of type Portal Iviews.
User's can view the tasks assigned to them in their UWL without any problems. To execute a particular task, user clicks on the corresponding Work item in UWL.
However, this gives a portal runtime error.
The log file has the following error.
com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#LAAJ#9176##LTIVSH01.vshodc_LP1_11774250#LAAJ#4474b4ce1db811ddba24001871775ce5#SAPEngine_Application_Thread[impl:3]_33##0#0#Error##Java###04:38_09/05/08_0046_11774250
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.ConnectionString>&\#39;; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute:
System: &\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;ConnectionString&\#39;.
Please suggest a solution for this problem.
Regards,
Preksha

Dear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards

Portal Runtime error in UWL

I am trying to access the UWL from Home -> Work -> UWL.
However, for non administrators, this gives a Portal Runtime error.
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:57_27/02/08_0051_11774250
See the details for the exception ID in the log file.
I knw most probably this error is due to missing permissions, but i have set the permissions for the End User Content folder.
I have also tried assigning permissions for the entire Portal Content folder with End user permissions, however, this does not work.
Any suggestions?
This is verrrry urgent.
Regards,
Preksha.

Hi,
Thanks for the reply..
I managed by assigning permission for the iview
pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapWebDynproLaunch
Its working now.
Regards,
Preksha

Two iView(out of three) give Portal runtime error when refresh MSS-UWL Page

Hi All,
i am getting the Portal runtime exception in the MSS->Work Overview ->2nd and 3rd iView on this page.
First iView is the UWL-Task 2)Attendance Overview and 3) Work Orders
When i refresh this page "refresh" from pae level refresh. i am getting the below error on 2nd and 3rd iView. Last 2 iView is not displaying.
Portal Runtime Error
An exception occurred while processing your request
Exception id: 02:02_12/01/09_0039_38688450
See the details for the exception ID in the log file.
i have tryed to search the log also in the default trace but can not find any log with this exception ID.
Please suggest me on this ?
thanks in advance!
Narpal S Sihag

Hello,
I have also a problem like this (error 09_0006_808022650)
Can you describe your scenario ?
My scenario is
- Portal MDM connection OK and working tasks in MDM
- new UWL System (connector type : MdmUwlConnector)
- new config file (XML)
- dedicated Role and dedicated iView (copy of standard UWL iView)
- clearing cache
Test : No working Tasks in UWL
- restarting portail application com.sap.netweaver.bc.uwl
Test : No working Tasks in UWL
- running wizard (System Admin, system config, UWL customize IView)
- new field "TEST" to iView
- portail create the com.sap.pct.erp.mss.001
Test : No working Tasks in UWL
Test : standard UWL crashes with error 09_0006_808022650
After what, we try roolback, removing XML config, connection, dedicated iView, ...
Still crashing with error 09_0006_808022650
Now our developpemnt system don't work for UWL ... (using UWL with ECC connection and was OK for ECC)
Questions : is your scenario similar to this one ? Is anyone can help us ?
My best thanks
Vincent

Portal Runtime Error on clicking work item in UWL.

Hi
I can see the workitems displayed in the UWL. But when I click on any of the items it shows a Portal Runtime Error
with an Exception Id like this : 02:48_13/04/10_0030_6207450.
Can anyone help me out with this ? Does this error have anything to do with the ITS ?
Also, how can I view the log file ?

Thanks Koti.
I have got the log file although the version of the portal that I use is probably different from yours. ( It didnt have 'System management'.)
Well, the log file says something like this :
" Exception in SAP Application Integrator occured: Unable to parse template "
I still suppose this has something to do with the ITS , because when i test service for its I get an error message like :
"Template interpretation failed. Template does not exist"
But when I test service for the webgui it opens up without any problems.
Any more suggestions ?

Portal Runtime Error with the UWL

Hi Poartal analysts,
Iam getting the problem like
"Portal Runtime Error--- form elements must have unique Ids : Image Attachment- 21738612 ........................"
when clicking on UWL page.This error is occuring to only one user.
Please advice.

HI Sheker,
Go thru this threads hope it helps you to resolve the problem.
1. [UWL Administration error;
2. [Re: Error in UWL config help!!;
3. [Re: Portal Runtime Error;
4. [Re: Runtime error in EP 6.0 SP 2 after installing UWL;
points if helpful
Thanksyou,
Regards
Vijai

UWL - Portal Runtime Error

Hey Guys,
Looking for a bit of assitance with a UWL error. I have configured UWL and everything seems to run nice with my user(super admin) but when I add UWL to my test user I get the following error:
Portal Runtime Error
An exception occurred while processing your request
Exception id: 09:04_17/12/07_0207_755188550
See the details for the exception ID in the log file
I have reason to believe that this is a permission error because everything works fine if I assign the content admin role to the user.
Anyone have any suggestions.

Hi,
Try assigning End user permissions to pcd -> content provided by sap -> end user content folder.
Also, check out if u have given end user permissions to the system defined for UWL. Assign permssions for " everyone " grp and dont forget to check the "end user" check box.
Cheers!!
Ashutosh

UWL task item - On clicking shows Portal runtime error

Hi Experts
When clicking a task under Task tab in Inbox of UWL I am getting error
*Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:17_20/05/10_0056_319362650
Refer to the log file for details about this exception*
Please help
Thanks in Advance
ASR

Hi All
Problem now solved.
So I am documenting the steps used to solve it.
1. Change these parameters for the content producer's backend system object
Web Application Server information
Web AS Host Name:     companyname.com
Web AS Path:     /webdynpro/dispatcher/
Web AS Protocol:     https
2. Change UWL System Parameters for u201CSAP_ECC_HumanResources"
Web Dynpro Launch Sytem = SAP_WebDynpro_XSS
User Roles = Z_UWL_HR
3. Re-register u201CSAP_ECC_HumanResourcesu201D UWL system
4. Clear cache of select u201CSAP_ECC_HumanResourcesu201D UWL system.
Hope this solves many users tricky UWL issues.
Thanks
ASR

UWL WORKLIST GETTING PORTAL RUNTIME ERROR

HI Gurus
Plz do needful ,
For all the user UWL ( Universal worklist ) which is kept as a role is excuting fine , But for ONE END USER it is getting the ERROR as below when he clicking on the particular role which is in Portal and my portal confguration are EP 6.0 SP 16.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.gssl.folders.FL_GSSL_Content/com.gssl.folders.FL_GSSL_Standard_User_Role/com.gssl.folders.FL_GSSL_Portal_Users/com.gssl.roles.gssl_eu_role/com.sap.portal.eu_ws/com.sap.netweaver.bc.uwl.uwl_page/com.sap.netweaver.bc.uwl.uwl_iview
Component Name : com.sap.netweaver.bc.uwl.ui.UWL
Form elements must have unique ids: ImageAttachment-24300-0000090900$BUS2034$BO (class com.sapportals.htmlb.Link).
Exception id: 11:46_13/12/07_0786_2755150
See the details for the exception ID in the log file
Regards
KRISHNA

HI Gurus
Plz do needful ,
For all the user UWL ( Universal worklist ) which is kept as a role is excuting fine , But for ONE END USER it is getting the ERROR as below when he clicking on the particular role which is in Portal and my portal confguration are EP 6.0 SP 16.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.gssl.folders.FL_GSSL_Content/com.gssl.folders.FL_GSSL_Standard_User_Role/com.gssl.folders.FL_GSSL_Portal_Users/com.gssl.roles.gssl_eu_role/com.sap.portal.eu_ws/com.sap.netweaver.bc.uwl.uwl_page/com.sap.netweaver.bc.uwl.uwl_iview
Component Name : com.sap.netweaver.bc.uwl.ui.UWL
Form elements must have unique ids: ImageAttachment-24300-0000090900$BUS2034$BO (class com.sapportals.htmlb.Link).
Exception id: 11:46_13/12/07_0786_2755150
See the details for the exception ID in the log file
Regards
KRISHNA

UWL Task does not execute.........Gives Portal Runtime Error

Hi,
I completed UWL configuration.Some tasks execute properly but some tasks not execute it shows error like...
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapLaunch
Component Name : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Application URL ':///sap(ZT1qRnRCaDZMVzlyX2llTjRJZTRGcXp3LS1NTzJqNlpibU42bkFwTzZaejdObTZ3LS0=)/bc/gui/sap/its/webgui' is not valid! Please check the protocol and host entries for system 'B07CLNT100_GB'..
Exception id: 05:50_27/12/07_0020_7205750
See the details for the exception ID in the log file
Please help me out to correct this problem.
Regards,
Gurprit Bhatia

Activate below services in ur back end systems
With transaction SICF and locate the services by path
sap/bc/gui/sap/its/webgui
Activate the full path to these services
with the context menu.
goto SE80
Locate the Internet Services
SYSTEM
Publish these services with the Context
Menu -> Publish -> Complete Service
and also WEBGUI
Publish these services with the Context
Menu -> Publish -> Complete Service
Regards
Krishna.

EP60 SP2 Portal Component Support

Hi EP Experts,
   We are using EP60 SP2 and we are using Universal worklist to look at the workitems in the workflow inbox.
   Current UWL portal component supports only SAP file types while attaching a document to the work item. When i try to attach (.doc,.xls,.txt...) other than SAP document types i get some error 'PC application file couldnot be imported'.
   Attachment funtion through SAP Business workplace supports all type of documents.
   Was there any enhancement with EP60 SP3 or is there any patch released for EP60 SP2 to overcome this limitation with UWL.
   Did anyone came across this problem?
Thanks experts
arun
Message was edited by: Arun Prasad

Hi José,
From System Administration>Monitoring>Knowledge Management>Component Monitor>Service>Scheduler-> I view this error:
My component startup failed 2/23/10 2:44:53 AM
Configuration Error: Failed to load task My component error(there is a red point)
From Properties :class java.lang.NullPointerException
When i reapet the upload of my fil.par(directly to Sap Portal), scheduler restart and files into KM are update.
What's you think?
Best Regards
Giovanni

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

7.5 SP3 New Server - Runtime Error on Web Page

Hi experts
I have added a new web server to an existing BPC installation.
The environment is load-balanced, 7.5 SP3, built on windows server 2003 SP2, with SQL 2008 SP1
I used the prerequisites:
Xceed v6.5
Antixscript v3
However, when I try to open the /osoft page directly on the new server, I see the error shown at the bottom of this page.
I checked the DLLs against those on the 2 working servers, and they are the same.
I have copied the antixscript dll from system32 to websvr\bin, as I have seen similar problems before and this has resolved it.
Unfortunately, it hasn't worked this time.
I have also checked that I can log my PC (windows 7, IE8) into either of the existing web servers, and they work fine
I have also opened the web site directly on the new server and that works fine (although it offers nothing but Web and Admin, as Excel is not installed)
I really need to get this server up for user testing first thing in the morning (UK time)
Does anyone have any suggestions?
Thanks
ERROR DETAILS:
Server Error in '/OSoft' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
 <system.web>
 <customErrors mode="Off"/>
 </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
 <system.web>
 <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
 </system.web>
</configuration>

Quick update:
I'm removing BPC and reinstalling, as the issue definitely lies within BPC and/or its associated Web Site.
I know this as I am able to successfully connect from a client PC to to Reporting Services website.
If anyone has any suggestions, now would be a great time to make them known.
Thanks again

Portal Runtime Error : An exception occurred while processing a request

Hello friends,
After upgradation of my portal to the following patch level, SAP J2EE 6.20:
Portal Version : EP 6 SP 2 patch 29 hotfix 0
Content Mgmt and Collaboration version : 6 SP2 patch 5
i faced many performance related issues. Portal seems to be very slow. After logging in, most of the time I get 2 errors:
Either
1> Iview remains blank.
Or
2> Portal Runtime Error : An exception occurred while processing a request. Portal Runtime exception occured. Please check the System Log.
But when I refresh that particular iview, it works fine.
I went through the portal.log file (/usr/sap/PEP6/j2ee/j2ee_00/cluster/server/managers/log/portal/logs). And found the root cause of most of the exceptions as "com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found."Aug 18, 2005 6:07:42 PM # PRT-Async 2 Fatal Exception ID:06:07_18/08/05_0669
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/ACCContent/ACCContent.Roles/Company/R.Employee/W.MyWork/P.MyWork.DesktopTools/I.Contacts
Component class : com.sapportals.portal.prt.pom.RootComponentNode
User : tempuser
 at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:853)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:311)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
 at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:153)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Caused by: com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found.
 at com.inqmy.services.servlets_jsp.server.ServletContextFacade.loadServletLocal(ServletContextFacade.java:3660)
 at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:81)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.include(RequestDispatcherImpl.java:384)
 at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:144)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Help needed.(as i am helpless now.)
Regards,
Nilz

Anthony,
I had check it. It was correct. But the thing when I saw in the component Inspector of portal, my iview did not appear.
I created like this
 project-> rightclick-> export-> par ->selecting project-> givint protal password-> and finish.
The NW didn't give any error, but the par file didn't appear in the portal componet Inspect.
but the par file is created in the NW studio Navigation bar.
Let me know any help regarding this
thanks
venkat

UWL Runtime Error in EP60 SP2

Similar Messages

Maybe you are looking for