UWL - Starting Workitmes using WinGui

Hi all,
in standard, if I open a Workitem in the Universal Worklist, which comes from a SAP System, it's executed with Webgui. Does anybody know, if there's a possibility to execute the workitem with WinGui? I haven't found any iview parameter to change the execution mode from Webgui to WinGui!
Hope that anybody can help me!
Regards,
Andy

Hi Andy,
I have a question for u.. u said u have executed the workitem from UWL which is linked to R3..We are trying to execute the workitems which are related to ESS/MSS workflows, but i am getting message as Work item executed (new processing status: "In Process") with a blank screen.
Can u help me out in this regard.
Thanks,
Sunil

Similar Messages

URL format to call transaction using WinGUI

Hello,
We would like to display SAP transactions in the portal, however they are from the SAP APO sytem and require the the WinGUI setting as they contain graphics that the ITS cannot interpret. WinGUI does not use the ITS. An iView or External Service can be created to display the required transactions using the SAPApplication.Transaction but as the screens are made up of several windows we would like them to open up full screen. The standard iView can open in a new screen but the window opens in a different place depending on the user's internet settings. To solve this a java iView could be written to dictate the starting point and size of the window but I am having trouble with the URL of the transaction. Using WebGUI the following format can be used to call a transaction:
<System.Access.ITS.Protocol>://<System.Access.ITS.HostName><System.Access.ITS.Path>/webgui/!?transaction=<SAP_Dynp_AutoStart%><SAP_TCode>%20<SAP_Dynp_Params%>&client=<System.Client>&language=<Request.Language>&accessibility=<User.Accessibility>
Does anyone know the format of the URL to call a transaction using wingui (it doesn't work to substitute wingui for webgui in the format above)?
Thanks for your help,
Katie

HI,
You need to write the codition like below,
If Message = 'Successful'
If Button = 'SUBMIT'
Call Transaction 'ZABC'.
Endif.
Endif.
Regards
Sudheer

How to find out wheter user is using WINGUI or SAPGUI

Is there any ABAP function module or clsas method to check the GUI TYPE?
I'd like to know whether the end user is using WINGUI or SAPGUI.

have a look at BDS_GET_GUI_TYPE
ICL_GET_GUI_TYPE
reward points if helpful

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

I've recently started to use Numbers but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use. Looks like I have the same situation on my iphone. Any guidance? Thanks.

I've recently started to use Numbers on my macbook pro but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use.
Looks like I have the same situation on my iphone.
The only option I'm being given is to create an lCloud account.
Any guidance? Thanks.

The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
Jerry

Can not start HTTP_server using "opmnctl startall" after applying p4505133

After I apply patch 4505133 on win32
10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER
I can not start HTTP_Server using opmnctl startall, got following error in apache log file:
[Thu Mar 22 22:43:54 2007] [error] (2)No such file or directory: mod_plsql: Please check your enviroment.\nORACLE_HOME is [C:\\OracleHomes\\oms10g]\nPATH is [C:\\OracleHomes\\oms10g\\bin;C:\\OracleHomes\\oms10g\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OracleHomes\\oms10g\\Apache\\Apache\\fastcgi;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\bin;C:\\WINDOWS;C:\\WINDOWS\\system32]\nNLS_LANG is [Not Set]
[Thu Mar 22 22:44:00 2007] [crit] (2)No such file or directory: mod_plsql: Unable to initialize Oracle OCI
Any idea what is going on?
thanks,

Thanks for u r reply.
resolved this issue
oracle/middleware/oracle_idm1/bin
oidldapd folder is missing. so we copied the folder from trail environment and placed in above directory and started opmnctl services.
it worked.
Thanks and Regards,
sri485.

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

HT201342 I have an icloud address but now I am told "that address is taken". How can I start to use it again?

How can I start to use my own address? It is old from .me

Welcome to the Apple community.
Unfortunately you cannot change an iCloud mail address once you have created it. You can however use an iCloud alias which you can set up at iCloud.com.
To create an alias.....
Navigate to the Mail feature at iCloud.com and click on the gear icon in the bottom left corner. Choose Preferences from the drop down menu, then select accounts from the options across the top, here you can create your alias.

Start sap using run

hi guys
start sap using run
in c: type startsapr3 and follow the syntax

Hello
1 - Start CMD.exe
2- Goto directory of Kernel
3- sapstart.exe name=<SID> nr=<SYS_NUMBER> sapdiahost=<hostanme>
Cheers,
Levi Shaked

Hey! I am from Egypt and purchased I phone5 unlocked from USA Atlantic City NJ. When I started to use it the Home button wouldn't respond. I tried everything pushing hard, turning it off and on again it's just hopeless. What can I do? Need help!

I purchased Iphone 5 from USA while I am from Egypt. It's unlocked so no issues there, yet when I started first using it the home button wouldn't respond under any circumstances! I am afraid to give it to an Apple retailer in Egypt to fix it coz that might make me lose my warranty in the US.. Sending it back to the US and asking for a replacement might take time and according to the purchasing reciept it says return date Aug 15th! Need some help.. Thanks

Thnx, I already did that when I got the chance. But when I took it over there yesterday they told me we can only fix it and not replace it coz I exceeded my warranty reclaim!! its just not practical to have it and send it back overseas within the warranty limit! I was so furious it's just so not fair..

How can i start to use i chat if it said my password is incorrect and i change it, but still appears that the password is wrong :(

how can i start to use i chat if it said my password is incorrect and i change it, but still appears that the password is wrong

Hi,
AIM
If this is a Name valid with the AIM servers the password has to be 16 characters or Less.
The Apple IDs from MobileMe and @Mac.com allow you to create (And prompt your for ) Longer passwords.
These Names are Valid with the AIM servers but they cannot process the password.
Use iforgot to Change the password to something shorter.
Googletalk
If you are using a Google ID then you have to enter your Google ID as it appears when you log in to the Google Web Mail Page.
The Mail App seems to allow the Endings (@gmail.com and @googlemail.com) to be used almost interchangeably where as the Jabber Server Google run for Google Talk is stricter (so iChat needs to be precise).
Also the chat option needs to appear in the Web Mail page.
If it does not it needs Enabling on you Google Account settings page.
8:10 PM Tuesday; July 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to start to use Oracle client to access Database ?

Folks,
Hello. I have just installed Oracle Client into directory /home/myOracle/Oracle_Client. But I don't know how to start and configure the client to access Oracle Database.
Can any folk tell me how to start to use Oracle client to access Database ?

user13764998 wrote:
I have earlier managed to install the Oracle Client (32-bit) in 32-bit clients and servers Oracle Client 10.
The reason that it went well before was the exellent setup and configurationprograms we got with that version.It seems you are confusing the "full" Datbase Client with Instant Client.
Now I'm trying to install the Oracle Instant Client 11g R2 both 32-bit and 64 (of the latest revision) on a 64-bit Windows 2008 Server .
I have managed to install the driver but the setup doesn't give me any Net Configuration Assistant or Net Manager to help with the configuration.What setup? Are you not using just the zip files?
What are you installing exactly, i.e. what install media (file) did you download?
So I haven't succeded in configuring it despite I I read the readme-info that comes with the Instant Client files.There's not much to configure - that's sort of the point of Instant Client. Just drop a few files in a folder, set PATH and off you go.
Doesn't <instant client dir>\sqlplus user@'hostname/servicename' work?

Running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE

running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE what corrective actions need done
thank you

You should post that on the Boot Camp forum, that is where all the Boot Camp and Windows guys hang out.
Good luck.

I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?

I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?
should i come into the actual apple store or can you help online ?

Hi vickkjayy11 and welcome to Apple Support Communities,
Just to be clear, we are a peer to peer support community and have nothing official to do with Apple.
So to your problem, when you say:
"I reset my macbook pro a few days ago"
What exactly happened? Did you have a Time Machine backup?
Read this:
OS X: About OS X Recovery - Apple Support
It would help to know the exact model (size and year) and which OS you're using.

Starting application using deploymanager.bat

i have used the following command to deploy EAR file. however i dont know how to start the application simulataneously..is there any command along with the following which i can use to start the application using CLI
<b>command for deploying:-</b>
> deploymanager.bat C:\test\deplopyer.xml
in which the XML file contains the following
<deploy-manager-config>
    <version-id>
    </version-id>
    <project-dir>
      C:\usr\sap\F15\JC30\j2ee\deploying
    </project-dir>
    <deployable-object action-type="deploy">
      <ear-file>
        <ear-path>
          C:\Test\rms\rms.ear
        </ear-path>
       </ear-file>
   </deployable-object>
    <login-info>
     <host>
      Hyperion
     </host>
     <port>
        53004
     </port>
    <transport-protocol>
        None
      </transport-protocol>
     <user-name>
        Administrator
      </user-name>
     <user-password>
        abc123
      </user-password>
    </login-info>
    <user-role-mapping>
      <role-name>
        unknown role
      </role-name>
    </user-role-mapping>
    <library-info>
    </library-info>
    <supports>
      <support>
        p4
      </support>
    </supports>
    <deployment-properties>
      <property>
      </property>
    </deployment-properties>
    <repl-var-properties>
    </repl-var-properties>
    <log-file>
      C:\Test\deployer_log.txt
      </log-file>
</deploy-manager-config>
I have deployed this EAR file successfully however it doesn't start on its own..i have to go to visual administrator to start it...isnt there a way to start it using CLI?

Resolved. I also faced same problem and wasted two days... This error appeared even i located compiled classes in correct location.
To resolve the issue,
1. Start production server - Ex - http://localhost:7003/yourapplication
2. Then Start dynadmin - http://localhost:7003/dyn/admin
3. Then go to ATG Control Center Administration
4. Then start ACC in Server VM
5. Then it will open ACC control window
6. Login to ACC
7. Then go to Pages and Components
8. Then go to Components by Path
9. Brows your commpont.
Thanks
saminda konkaduwa

UWL - Starting Workitmes using WinGui

Similar Messages

Maybe you are looking for