UWL Task is not dropped into uwl task .

Dear gurus,
In ess i am applying leave and this will available under task list of manager after 1st approval it is not dropping into task for 2nd level approval, please guide me to proceed.
Thanks & regards,
smruti ranjan moharana

Hi Smruti,
Have you customised the standard leave request workflow in the backend?
Standard leave approval workflow is one level one.
Check in the backend and look for the worklfow log and see what happened after 1st level approval has been done.
Go to SE38--->give program name as RPTARQDBVIEW and then give the personnel number and leave request date as input.
Press F8 and it will show the leave requests you have raised.
Then check the workflow log and let me know what happened over there.
Take help of workflow consultant if you need.
Cheers,
Raja.D

Similar Messages

BPM TASK IS not visible in UWL Inbox

Hi BPM Expert,
I am facing the big issues in BPM process Triggered problem. earlier i used to BPM start using Web service with Two entity as ID and Username but its was working fine .but i have some requirement to adding one element in Existing WSDL entity as casename , i have added that element and execute the web service using WEBDYNPRO application ,but Task is not visible in UWL inbox but earlier it was working perfectly, after adding that field ,BPm tax is not visible UWL inbox ..
Please guide me ,Its urgent...Plz plz..
Its showing error as
Technical issues is triggered during the process creation..
Thanks
sudhir

Hi ,
I am executing the WEbservice using WSNAVIGATOR but its not execute , its getting HTML log error as below..
1-Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE"
2-
HTTP/1.1 500 Internal Server Error
server: SAP NetWeaver Application Server 7.20 / AS Java 7.20
content-type: text/xml; charset=utf-8
date: Sat, 26 Nov 2011 11:40:56 GMT
transfer-encoding: chunked
Set-Cookie: <value is hidden>
2e4
<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Server</faultcode><faultstring>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</faultstring><detail><yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException xmlns:yq1='http://sap-j2ee-engine/error'>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
0
Thnaks
Sudhir

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.
I checked my secondary harddrive and there is plenty of memory.
I emptied my burn folder but the photos still will not drop into it.
I created a new burn folder, no luck with this either.
230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
I have shut down and restarted my computer.   No change. The photos still will not drop out of iPhoto.
My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available. It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
I have never had this problem before. It is usually very easy to move my photos from iPhoto.
I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.
Thank you so much for any help you can provide.
I really appreciate it.

YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help.   I really, really appreciate it.

How do I set up the XCode Debugger so that it does not drop into asm?

How do I set up the XCode Debugger so that it does not drop into asm?
I want to step through my Cocoa Objective-C code and I do not want to see the underlying assembly. When I hit step over, I want it to step to my next line of objective-C code, not to the next assembly language statement.
99+% of the time, I want to do high level debugging. Don't you?

I solved my own problem almost immediately after I posted it.
You use Debug>Toggle Disassembly Display.
It puts a check mark to drop into assembly, no check mark for no assembly (my choice) and a dash (NSMixedState) for both. It's obvious now.
Sometimes it can be vexing to find simple XCode features quickly.

Task status not changing in UWL

Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Sarath

thats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna

GP task is not going to UWL when defining the substitution rule

Hi experts,
I have defined substitution rule for user in UWL, all task is going to assigned user's UWL
but GP task is not going .
How to solve this ??
Regards,
Piyush

Add a dummy execute sql task as first step inside loop and add a breakpoint to that for OnPreExecute event and check value of variable during each iteration to see if it gets value of each child package witin folder correctly.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Project Server Task Approvals not Going into Plan

Hi,
After approving a task, we are finding that it is not going into the plan - on our separate test environment, the same steps work ok.
Any ideas?
Thanks

Hi,
Could you please let me know, if the issue is happening for only one projects or all the projects.
Also, Check for failure transactions.
select
ASSN_UID,
* from pub.MSP_ASSIGNMENT_TRANSACTIONS
where ASSN_TRANS_STATE_ENUM
=4 and
proj_uid like'Proj_Uid'
Also let me know on which patch level you are on?
Check if you have any projects affected with lost resource bug
http://blogs.technet.com/b/projectsupport/archive/2014/02/06/project-server-2013-and-project-online-what-happened-to-my-resources.aspx
SELECT DISTINCT A.PROJ_UID, P.PROJ_NAME
FROM DRAFT.MSP_ASSIGNMENTS A
LEFT JOIN DRAFT.MSP_PROJECT_RESOURCES PR ON A.RES_UID = PR.RES_UID AND A.PROJ_UID = PR.PROJ_UID
INNER JOIN PUB.MSP_RESOURCES ER ON A.RES_UID = ER.RES_UID
INNER JOIN DRAFT.MSP_PROJECTS P ON A.PROJ_UID = P.PROJ_UID
WHERE PR.RES_UID IS NULL
UNION
SELECT DISTINCT C.PROJ_UID, P.PROJ_NAME
FROM DRAFT.MSP_PROJECT_CALENDARS C
LEFT JOIN DRAFT.MSP_PROJECT_RESOURCES PR ON C.CAL_UID = PR.RES_UID AND C.PROJ_UID = PR.PROJ_UID
INNER JOIN PUB.MSP_RESOURCES ER ON C.CAL_UID = ER.RES_UID
INNER JOIN DRAFT.MSP_PROJECTS P ON C.PROJ_UID = P.PROJ_UID
WHERE PR.RES_UID IS NULL
ORDER BY P.PROJ_NAME
Thanks,
Phani

Tasks are not appearing in UWL

Hi All,
When i am accessing UWL application in portal we are getting warning "cannot Connect to Provider".
I did connection test of the system object and the connector is working fine (using SAP Logon Tickets). When checking the UWL log I have found the following messages:
"Problem in calling BWF API to retrieve inbox items in system
SAP_ECC_HumanResources"."com.sap.portal.connectivity.ConnectivityRuntimeException: No more storage to append internal table".
Please help me on this.'
Thanks,
Ravi.

Dear Ravi
I hope you are well and many thanks for using the SAP Discussion Forums.
In relation to the scenario that you have described you mentioned the following:
When you are accessing the UWL application in portal you are getting the warning "cannot Connect to Provider You performed a connection test of the system object and the connector is working fine (using SAP Logon Tickets).
When checking the UWL log you have found the following messages:
"Problem in calling BWF API to retrieve inbox items in system SAP_ECC_HumanResources"."com.sap.portal.connectivity.ConnectivityRuntimeException: No more storage to append internal table".
Ok now in relation to the issue that you have described there are a few important points to highlight. The UWL follows and works from the concept off the UWL Destination Service Configuration.
Now although you mentioned the configurations are setup accordingly. I would like you to kindly review the UWL Destination Service Configuration as the smallest discrepancy maintained can cause unpredictable and unexpected behaviour.
SAP Note: Note 1133821 - UWL Destination Service configuration
When you followed and implemented SAP Note 1133821 - UWL Destination Service Configuration we need to make sure that connector names and also destination names match exactly (Case Sensitive).Example: I mean if your portal system alias (=UWL connector name) is for example XYZCLNT100, then the rfc destination name should be exactly XYZCLNT100$WebFlowConnector. After checking this and if you make any configuration changes
Clear the UWL Cache
Restart the UWL Service (during a period of downtime/low usage levels)
Let me provide a little more clarification regarding the importance of a correct UWL destination setup: The UWL works using two Pull operations. Firstly tasks are pulled from the backend into the UWL cache and they are then pulled a second time from the cache into the UWL User Interface. Due to this architecture there is an inherent delay in the automatic refresh's
of the UWL. There is no way, in the current architecture that the UWL can refresh instantaneously.
This is upon inital load as the cache must be built first upon logon.
So getting back to this error that you are encountering "Cannot connect to the provider". From a general troubleshooting and overview analysis guide I would like to point you in the direction of the following guideline link:
(UWL)Error message while trying to connect to provider
http://wiki.scn.sap.com/wiki/display/TechTSG/(UWL)Error+message+while+trying+to+connect+to+provider
Now to be more focused in our investigation let us seperate your two log findings.
The first of which relates to:
Problem in calling BWF API to retrieve inbox items in system SAP_ECC_HumanResources".
Regarding the exception above did you attempt to recreate any system objects to see if that resolved the issue? Also kindly ensure your authorizations are configured correctly.
Secondly
"com.sap.portal.connectivity.ConnectivityRuntimeException: No more storage to append internal table".
I would like you to review the following documentation:
KBA number: 1577547 UWL Performance Tips and Considerations
Also, you may want to take a look at our sizing guide that our colleagues colleagues in development support have written in relation to the UWL. You can find the document under this path: www.service.sap.com/sizing > sizing guidelines ' SAP NetWeaver > UWL Sizing guide
These are details that you need in order for the performance to be optimal in the Universal Worklist. Please check through the documentation to see if your parameters are set accordingly and also that you have followed the information in this document.
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer.

Work flow task id not found in UWL config XML file

Hi
We are facing a strange issue with UWL XML file.
We are running EP 7.0 SP13
We configured UWL and we are able to see the work items in UML iview. These are the same work items as seen in SAP Inbox.
But when we open the uwl.webflow.<system alias> XML file corresponding to the back end system, We were not able to see the task id of the work flow item displayed in the UWL.
Any help on this would be highly appreciated.
Thanks and Regards
VNK

Hi VNK
I am facing the same issue - Please let me know if you have found a solution.
Regards
John

Hi guys, Having a problem with emoji. I have the emoji on my dock which I found a shortcut on Cult of the Mac. I click on the emoji and drag it to my email or whatever, and it will not drop into place. There is a blue square. Other shortcuts don't work.

Hi Guys,
Having problem with emoji, I have the character palette shortcut on my dock which I found through article from Cult of the Mac. I click on the emoticon and drag it to my email or whatever and get a blue box - no emoji. I tried the keyboard shortcut - doesn't work. I tried the drop down the menu in edit - doesn't work either. I am running Lion and want to upgrade to Mountain Lion. Want to fix this before I upgrade or should I just upgrade and hope for the best? Been all over the net looking for solution.
Thanks for your help,
blueheron11

Pages does not support the Apple font used for color emoji, so that behavior is normal.
With what app are you reading the yahoo mail? There is really no guarantee than any other email service will show the special Apple font involved.
You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
You should also be able to upload graphics here easily by clicking on the camera icon. My email is tom at bluesky dot org.

Audio Hijack content not dropping into iTunes 7

Since upgrading to iTunes 7, my Audio Hijack recordings don't drop in or at least I can't find them.

I have been having the same problem and I have been searching the web for answers FOR A LONG TIME. Surprisingly AHP support was no help and told me to contact Apple. All they offered me was the following, which I had already tried:
"Audio Hijack Pro can be set to send recordings to iTunes. With version 7, iTunes introduced a new sub-library system for sorting files. Bookmarkable MP3 files and Bookmarkable AAC files are now sorted into the Podcasts and Audiobooks sub-libraries, respectively.
Bookmarkable MP3 Files
Bookmarkable MP3 files are sorted into the Podcasts section by iTunes. If this sub-library is not visible, select "Preferences" in the "iTunes" menu. In the "General" section of preferences, check the box to enable the Podcasts library. Click OK, and you should be able to select the Podcasts library to see your bookmarkable MP3 recordings.
Bookmarkable AAC Files
Bookmarkable AAC files are sorted into the Audiobooks section by iTunes. If this sub-library is not visible, select "Preferences" in the "iTunes" menu. In the "General" section of preferences, check the box to enable the Audiobooks library. Click OK, and you should be able to select the Audiobooks library to see your bookmarkable AAC recordings."
When I drop an Audio Hijack Pro created MP3 into iTunes 7, nothing happens, the files do not show up and I am unable to play them. Curiously, they do appear in my Podcast folder in my itunes music. I love AHP, but this is devasting, just months after converting close to 1,000 vinyl released only tracks to MP3s.
Please, if there is a fix, enlighten me!
12in Powerbook G4 Mac OS X (10.4.8)
12in Powerbook G4 Mac OS X (10.4.8)
12in Powerbook G4 Mac OS X (10.4.8)

HELP! My images will not drop into a pages!

Hello,
I am writing a large paper with many images. There are probably around 15-20 images already in the paper, with text, but when I tried to drop in another picture it did not show up. I could click 'edit' and it would say 'undo drop' but there was not image to 'undo'. What should I do?

Lilly.Love wrote:
Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

I would like to use a video my grandson posted on FaceBook in my iMovie. I saved it to my desktop, but it will not drop into iPhoto. The format is video.php.html.

I am using a MacBook Pro OK X Version 10.9.5. Processor 2.8 GHz Intel Core 2 Duo
Memory 4GB 1067nMHz DDR3
iPhoto Version 8.1..2
My grandson posted a video on FaceBook that I would like to use in my Christmas Memories movie. He use a Kindle Fire HD. I downloaded it to my desktop (video.php.html), but I cannot save it to iPhoto. What should I do? Thanks.

Miriam Griggs wrote:
…a video on FaceBook that I would like to use in …video.php.html...
what you downloaded is no video (just some link to an 'internal website hosting the video'...
it's a bit tricky, to pry a video from FB's dead cold hands...:
click on the video for playback in your web-browser. (no need to run the full video)
replace the "https://www.facebook.com/…"
by "m.facebook.com/…"
the same site appears in a diff. 'look'…
right-click/ctrl-click on video, select 'download to'.......

GP Task not appearing in UWL

Hi, We have GP WD java application which is running CE 7.31 sp05. Some of the GP task is not appearing in UWL . What might be case,please suggest.

Hi Jigar,
As Mentioned in the previous posts re register the system and also clear the cache, once done check whether the task items are there in the UWL config or not.
If this doesn't solve update the problem after you do that.
Cheers-
Pramod

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

UWL Task is not dropped into uwl task .

Similar Messages

Maybe you are looking for