UWL tasks coming as emphasized(Bold) and unclickable

Hi All,
We have custom webdynpro application. We have configured UWL xml for these applications and tasks are coming to the UWL. But some times tasks are emphasized (bold) and donot come as link. Even we are refreshing the tasks remain bold and unclickable. We need to sign out and login again and then tasks come as clickable. Do anyone knows wat can be the reason for that?
Above mentioned is happening to default tasks but for completed task they never come as link even on refreshing and logging out it remains unclickable...
Can anyone help me wat I need to do for this to work? Do I need to change something the UWL xmls?
Its really urgent...
Thanks in advance!!!!
Regards,
Gurmat

Hi Gurprit,
Thanks for the reply. These are the same items that are displayed as links in New and default tasks once user is done with the task and refreshes the UWL that tasks come into Completed tasks category but this time they are not clickable.
Also I have configured the default tasks and completed tasks same. Could you tell me is there any other configuration done for notifications? Please let me know if I am missing something in providing you the details.
Regards,
Gurmat

Similar Messages

UWL task takes up to 2 minutes to appear

Hi there,
We have a situation where the UWL task takes between 1 minute and 2 minuts to appear in the user's inbox. in our analysis we have found that the task is created immediatly in the business process but it set with an inactive status. After a period of time the task status changes to Ready and the task appears in the users UWL.
We are using NW 7.2 SP3. The task is using WD for Java UI and the "Activate this task by default when creating it" is set in the time constraints. No other time constraints have been set.
Regards,
Christiaan

Hi Paul,
we have the same problem since we move from CE 7.2 SP3 to SP4.
We just created an OSS-Message last week.
regards,
Sid

Email Notifications for both UWL Tasks and Collaboration Tasks.

Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.

Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan

Email Notifications for UWL Tasks and Collaboration Tasks

Hi,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
I done with the all the Configurations suggested in the below link:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
Thanks in Advance.
Regards,
Sridhar.

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

How to make the CRM activity and task display in Portal UWL task iview ?

Hello experts,
I want that activity ,task and document in CRM inbox(t-code:sbwp) can be display in UWL task iview, and can pop-up to deal with when be clicked .
The workflow type item in ERP can be display and open to deal with by default.
But I need to the same function of CRM inbox content.
I had done some configuration according to "Configuring the Business
Package for SAP CRM 5.0 SP01.pdf".
But it can't realized my requirement.
How to do it ?
BR,
Jianguo Chen

Go to View .. Bars... and enable the bar for Level of Effort activities. If it's not there, create one.

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?

These Steps should resolve your issue
Step by Step to fix your Mac
If you don't have a backup of your data off the machine
Most commonly used backup methods
If you can't boot the machine and need to get data off it
Create a data recovery/undelete external boot drive
Your options for data recovery
My computer is dead, is my personal data lost?
Secure data removal
How do I securely delete data from the machine?
More:
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Error in executing process from the UWL task list

Hi,
I have created a process and assigned different users to different steps. For administrator, Overseer and Owner, i have kept role as initiator only. For the actions of the process, set the value as Initiation defined and in Default Roles tab, have assigned different users to each of the actions. From the URL generated on instantiation, i created a web dynpro iview and assigned it to a role R.
The UWL has also been configured. The initiator of the process is assigned the role R.
Now the issues are:
1. When the process initiator opens this role R, an error is displayed " Page not found or not available", but the process gets initiated since an entry for the same is made in the UWL task list.
2. Even when I click on the task entry in the UWL task list, i get the same error message.
3. Presently if i click on the role R, then only entry is displayed in the UEL task list. Is there a way in which task may automatically appear in the task list of the initiator of the process without him/her having to click the role and then initiate?
I am not able to figure out why this is happening. Can anyone please help me in this regard.
Thanks & regards,
Anupreet

Hello Anupreet,
Refer to these SAP notes
1104652, 1131403 or 1026119.
This should fix the issue.
Let me know if this works.
Cheers,
Mandrake

Getting UWL task count for all users in a role.

Hi.
I recently posted a question regarding a very similar issue, but I haven't got any response yet. I think my question might have been somewhat poorly phrased, so I will try to do better at explaining what we need.
We have a number of processes, most of which need to be dynamically assigned to a user when created. The way we want to assign those tasks is by executing a WebService which would receive a role name and get all the users for that role. Then, using the UWL API, it would check how many tasks each of the users have in their UWL, and return the UserID for whoever has the least tasks. I haven't been able to get this to work. I keep getting Logged in users context or session doesn't exist Exception.
Please, any help on this will be greatly appreciated.
Currently working with SAP NWDS 7.1 SP05 PAT0005

Hi,
Thank you for your response, however, that's not what I need.
For you and anyone esle who might find this extra info useful...
I know how to get a user's role(s), and how to get the users in a role.
I also know how to assign a task to a specific user dynamically.
Using the UWL API, I know how to get the tasks (or items) in a user's UWL from a WD application, I need to do that from a WebService and using pretty much the same code, with the necessary adjustments, I can't get it to work.
Furthermore, I'm able to get the UWL tasks for ONE user, that user being the one I log into the application with. For example, if I write code to get the tasks for user testUser1, I need to log in with testUser1 to get it to work, if I log in with any different user or make it a non-authenticated application, it won't work.
Again, help on this is much needed and will be appreciated.

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

When my email opens when I hit inbox it comes in as read. It used to come in bold and like unread what it is what happened I did not do anything

It is pretty simple. It used to always come in bold cause it was unread. Now it is coming in as read and that is not right .

Firefox does not do email. You probably have a web email application and I keep getting notices all the time for email applications that are being changed -- change now or get changed anyway, I think is how some of them read.

UWL Tasks in Widgets

Hi all,
I just want to have all my UWL tasks and alerts of portal in my widgets. Please let me know if you people have any ideas.
Regards,
Purush.

What ideas are you looking for?
You can create a widget in any number of ways to display this information. The simplest to get started would be to create a widget based on the "Table Widget Template".
Did you need ideas on how to get the data?
If you wanted to get fancy, you might want to create a flex application to show the data and embed it into a widget. The flex app could then be reused elsewhere.
JohnA

UWL Task Attachments

We have a requirement to launch custom webdynpro java app when the user selects the atttachment for the UWL task. We can modify the UWL XML file to lauch custom app for a task but for attachments I am not sure. Is there a way to configure the attachments for the UWL task to launch custom webdynpro java application? We are on NW 7.01 SP6.
Thanks for the help in advance

Hi Anu,
I am not sure that we can configure the attachments or not for your requirement.
As attachments link comes from Wrok Flow side.
But i can suggest you one work around -- you remove the default attachments button from UWL iview
and in UWL XML do the changes to add link which each will appear for each task . On this link you can
open your custom apps very easily and for justification you can say that for checking the attachments
no need to open the task details.
Regards,
Piyush

UWL Task Launching Problem

I have a step in my workflow which call a function module with a call screen as shown below
CALL SCREEN '9000'.
wfaction = wa_reason-wfaction.
reasontx = wa_reason-reasontx.
textreq = wa_reason-textreq.
In the inbox, I can doubleclick on the work item and launch the screen. This does not work in the UWL.. I am under a time crunch.
Any pointers will be greatly appreciated.
The XML file entry for this task in the UWL is as follows
<ItemType name="uwl.task.webflow.TS90100140" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWSHanlder" executionMode="pessimistic">
      <ItemTypeCriteria externalType="TS90100140" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWSHanlder" groupAction="" handler="SAPTransactionLauncher">
          <Properties>
            <Property name="GuiType" value="WinGui"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
Thanks a lot in advance

Hi Vreddy,
Did you make any recent changes? Did it ever work before?
What version are you on?
Did you check to see if there are any errors on the connector?
Did you restart the UWL service?
Please go through the UWL Troubleshooting wiki page (below) which discusses this issue:
http://wiki.scn.sap.com/wiki/display/TechTSG/Universal+Worklist+Troubleshooting+Guide
Thanks and regards,
Lorraine

To remove forward/resubmit icon in UWL Task

Hi ,
In UWL Task which is in Inproces Status, we can select the task and we have a small icon for forward/Resubmit.I need to remove this small icon.Can any one please guide me the XML Changes i have to do for this.
Regards
Alexi

Hi Chinthan,
Please let me know Is the below code ( uwl.forwardedtask.SAP) I have to remove .
<Actions>
        <Action reference="viewSubProcess"/>
      </Actions>
    </ItemType>
    <ItemType name="uwl.completedtask.SAP_ECC_HumanResources" connector="*" defaultView="WorkItemsCompletedView" defaultAction="viewDetail" executionMode="default"/>
    <ItemType name="uwl.forwardedtask.SAP_ECC_HumanResources" connector="*" defaultView="WorkItemsForwardedView" defaultAction="viewDetail" executionMode="default">
      <Caching refreshPeriod="session" expiryTime="default"/>
    </ItemType>
    <ItemType name="uwl.futuretask.SAP_ECC_HumanResources" connector="*" defaultView="FutureTaskView" defaultAction="viewDetail" executionMode="default"/>
    <ItemType name="uwl.notification.SAP_ECC_HumanResources" connector="*" defaultView="NotificationsView" defaultAction="viewDetail" executionMode="default">
      <Actions>
        <Action reference="complete"/>
      </Actions>
    </ItemType>
Regards
Alexi

UWL Task: Approve/Reject

Hi, take a look at following XML code. This task can either be approved or rejected by the user:
<ItemType name="uwl.task.webflow.decision.TS90100029.HR_System"
          connector="WebFlowConnector"
          defaultView="DefaultView"
          defaultAction="viewDetail"
          executionMode="default">
<ItemTypeCriteria systemId="HR_System"
                    externalType="TS90100029"
                    connector="WebFlowConnector"/>
</ItemType>
Following is the code for defaultView. I don't understand how the Approve and Reject buttons show up in this view? And where are the actions that are linked to these buttons defined?
<View name="DefaultView"
      selectionMode="SINGLESELECT"
      width="98%"
      supportedItemTypes="uwl.task"
      columnOrder="statusIcon, subject, creatorId, createdDate, detailIcon"
      sortby="priority:descend, dueDate:ascend, createdDate:descend"
      tableDesign="STANDARD"
      visibleRowCount="10"
      headerVisible="yes"
      queryRange="undefined"
      tableNavigationFooterVisible="yes"
      tableNavigationType="CUSTOMNAV"
      actionRef=""
      refresh="300"
      dueDateSevere="86400000"
      dueDateWarning="259200000"
      emphasizedItems="new"
      displayOnlyDefinedAttributes="yes"
      dynamicCreationAllowed="yes"
      actionPosition="top"
      referenceBundle="tasks">
<DisplayAttributes>
    <DisplayAttribute name="priority"
                      type="user"
                      width="10"
                      sortable="yes"
                      format="default"
                      referenceBundle="priority"
                      hAlign="LEFT"
                      vAlign="BASELINE"
                      maxTextWidth="0"
                      headerVisible="yes">
      <Menu>
        <MenuItem name="Low" actionRef="priorityLow" referenceBundle="menu_priority_low"/>
        <MenuItem name="Normal" actionRef="priorityNormal" referenceBundle="menu_priority_normal"/>
        <MenuItem name="High" actionRef="priorityHigh" referenceBundle="menu_priority_high"/>
        <MenuItem name="VeryHigh" actionRef="priorityVeryHigh" referenceBundle="menu_priority_v_high"/>
      </Menu>
    </DisplayAttribute>
</DisplayAttributes>
<Actions>
    <Action reference="refresh"/>
    <Action reference="defaultGlobalWizard"/>
    <Action reference="addToNavigation"/>
    <Action reference="removeFromNavigation"/>
    <Action reference="personalize"/>
    <Action reference="launchSubstitutionManager"/>
</Actions>
</View>

Ok, but I don't see where I have to specify this. If I take a look at the XLM for this task, all it says is: view="defaultView", action="viewDetail", where the viewDetail action is defined as follows:
<Action name="viewDetail"
        groupAction="no"
        handler="UIActionHandler"
        referenceBundle="view_detail"
        returnToDetailViewAllowed="yes"
        launchInNewWindow="no">
<Properties>
    <Property name="image" value="icon_detail.gif"/>
    <Property name="display_order_priority" value="-2"/>
</Properties>
</Action>
so there isn't even a UserDecisionHandler to begin with?

UWL tasks coming as emphasized(Bold) and unclickable

Similar Messages

Maybe you are looking for