UWL, viewDetail, click on attachments launches in new window and not same
Hello everyone
We have upgraded from EP6 to EP7.
After going into the UWL, selecting an item and then clicking on the View Detail button, when the viewDetail screen has been displayed, when I click on an attachement (e.g. vendor invoice), a new window is launched to display the invoice, but I want the attachment to be displayed in the same window as was happening in EP6. Anyone have any idea how to do this? Really this leads me on to wondering how the screen launched by the View Detail button can be configured. I see that the the Action has a number of parameters passed to it, but I haven't seen any documentation that tells me how I can configure this.
Thanks
Jon
Hi Jon,
I have encountered the same problem since migrating from EP6 to EP7.
I was just wondering whether you have come to solution for this issue, or if someone else has a fix for this.
Thx
Joris
Similar Messages
-
I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx
You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility -
Where is CS5 preference to use new window and not tabs?
Hi,
I prefer a new window rather than lose screen space to tabs.
Is there a preference somewhere to open new document in new window and not as a tab?
Thanks,
GarrettYou can use the "Float in window" command (available in Window | Arrange menu) - but this will work once you have created a new doc.
-
there is an option in firefox (latest version)(for windows7) to 'open new windows in a tab instead' what I want to do is to 'open new tabs in a window instead' Is this possible and how do I go about it
Hi,
There is an option called "browser.link.open_newwindow" which when set to 2 should open links, that would normally open in a new window, in a new window.
See http://kb.mozillazine.org/Browser.link.open_newwindow.
I can't think of an add-on that will do this for you.
You can always right click on the link and choose "Open Link in new Window" :-). -
I want to open links & sites in a new window and not a new tab, how can I do that?
when I click on a link I want to open a new window, instead to open a new tab.
Uncheck: Firefox > Preferences > Tabs: [ ] "Open new windows in a new tab instead"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Javascript window.open call results in new window and not new tab.
I'm creating an extension and using JS to open a new window. I've tried a variety of forms including something like: window.open("https://www.FOO.com" + dest,,"_newtab") and just window.open(url).. The option is set (tools/options) to open in a new tab. I've looked at preferences and forum suggestions to no avail. The proper url opens in a new window instead.
I've disabled all other addons and plugins.
I suspect I'm doing something silly, but would appreciate any insights.
Thx, --DonThanks for the reply. I'd seen those articles. AFAIK, the default settings are as they should be to open in a new tab (3 & 2 respectively). ...new_window.override.external = -1 though I don't know what that does or if it has any bearing on the issue.
Thx, --Don -
When I click on the "+" tab a new window does not open. Why?
Before today, when I clicked the "+" tab a new tab (window) opened. Now it does not. What changed?
I'm operating Firefox 3.5.3 -- Because I want the Google Toolbar.
Using Windows 7 on a Dell laptop.You may have a user agent that is corrupted and that identifies you as Firefox/3.5.3
*Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 AskTbAD2/3.14.1.20007 Firefox/3.5.3 GTB7.1
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default -
Why would someone launch a newer version and not get all of the bugs out first?
Facebook will not load. Email will not load. Nothing will load. Firefox is not compatible with my anti-virus, so it disabled. All Adobe files were lost in the download process. FF is running soooo slow. I uninstalled FF and now cannot reinstall. When I go to mozilla.com there in no "download now" button. What is up with this?
Warranties do not cover damage
-
Other browsers (Safari and Chrome) allow you to open a new window in the current space by right clicking the dock icon and choosing 'new window'. Firefox does not have this option in the right click. You must go to the other space that already has firefox open, create a new window there, and then drag it to the desired space. Please add the ability to launch a new window in the current space from the dock icon right click menu.
I have gone to the link that you supplied . In the task manager-- ending the entry for Firefox.exec did not resolve the problem.
I located my profile in the start menu In the run tab And entered %APPDATA%\Mozilla\Firefox\Profiles\as instructed.
I received a cannot delete parent file is corrupted or unreadable. I then ran the Chkdsk (check disk )and tried the process again with no improvement . I have uninstalled Firefox, and redownloaded It. Still no improvement. I want my Firefox WHAAAAAAA -
I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?
I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.
-
Question
When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I have firefox 14 and windows 7. firefox is pinned to taskbar. When I click on the firefox icon in taskbar, I want it to open in a separate window and not show preview.
Yes. Thank you. Tutorial solves half the problem. The firefox icon no longer shows previews but I am still unable to open a new window by clicking on it. I would like the icon to open a separate window every time I click on it. Instead, it opens only 1 window. Please help. Thank you.
-
Url iView: passing user/pass as get variables. Launching in new window
Hi,
I pass username and password as get variables from a url iView, and want a page containing this iView to open in a new page using the "Launch in new window" property set to "Display in a separate window".
When previewing the iView or page it is on, it works fine. But when launching it from the detailed navigation, this does not work. A new window is opened, but the user is prompted for username and password.
The page to display is an external site, and we have only got the url with user/pass to access it.
Any ides on what can be wrong?
Best Regards,
BjornHi,
Using the url in IE works fine. It seems to work everywhere but in the portal menu.
I have the appintegrator in the back of my mind, and will start to have a look at it. We are also considering a OSS message - this must be a bug in the system as far as I can see.
Bjorn -
Why when I click on a link a new window opens instead of a tab, this is new
When I click on a link a new window opens instead of a new tab. This is new. I've gone into tools and checked my settings and nothing changes it. It annoys me.
This issue can be caused by an extension that isn't working properly.<br>
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Clicking the button leads to new window to (Dmitry
hai....
i have created a portal form
and i have written a plsql procedure to display the report... the
plsql procedure
is
cvalue varchar2(10):='Report';
cursor enquiry is select * from oredu_enqs;
cursor enqs is select * from oredu_enqs where
OR_REG_REGION in
(SELECT REGION FROM ORE_REGS WHERE ACCMGR_ID=portal40.wwctx_api.get_user);
begin
if cvalue='Report' then
If (portal40.wwctx_api.get_user='JAYANTHAN')then
htp.br;
htp.br;
htp.tableOpen('BORDER=2');
htp.CenterOpen();
htp.TableRowOpen;
htp.TableHeader('Region');
htp.TableHeader('Enquiry No');
htp.TableHeader('Name');
htp.TableHeader('Address');
htp.TableHeader('Company');
htp.TableHeader('Phone(Office)');
htp.TableHeader('Phone(Residence)');
htp.TableHeader('Fax');
htp.TableHeader('Email');
htp.TableHeader('Accademic Qualification');
htp.TableHeader('Professional Qualification');
htp.TableHeader('Work Experience');
htp.TableHeader('Request Date');
htp.TableHeader('Comments');
htp.TableHeader('Course Enquired For');
htp.TableHeader('Enquiry Tyep');
htp.TableHeader('Action Taken');
htp.TableHeader('Date Of Action');
htp.TableHeader('Status');
htp.TableHeader('Remarks');
htp.TableRowClose;
FOR i IN enquiry LOOP
htp.TableRowOpen;
htp.TableData(i.or_reg_region);
htp.TableData(i.enq_no);
htp.TableData(i.first_name| |i.last_name);
htp.TableData(i.address| |i.address2| |i.address3);
htp.TableData(i.company);
htp.TableData(i.phone_off);
htp.TableData(i.phone_res);
htp.TableData(i.fax);
htp.TableData(i.email);
htp.TableData(i.qual_acc);
htp.TableData(i.qual_prof);
htp.TableData(i.work_exp);
htp.TableData(i.date_req);
htp.TableData(i.comments);
htp.TableData(i.course);
htp.TableData(i.enq_type);
htp.TableData(i.action_taken);
htp.TableData(i.date_action);
htp.TableData(i.status);
htp.TableData(i.remarks);
htp.TableRowClose;
END LOOP;
htp.tableclose();
htp.appletclose();
else
htp.TableOpen('BORDER=2',cattributes=>'VALIGN="TOP"');
htp.TableRowOpen;
htp.TableHeader('Region');
htp.TableHeader('Enquiry No');
htp.TableHeader('Name');
htp.TableHeader('Address');
htp.TableHeader('Company');
htp.TableHeader('Phone(Office)');
htp.TableHeader('Phone(Residence)');
htp.TableHeader('Fax');
htp.TableHeader('Email');
htp.TableHeader('Accademic Qualification');
htp.TableHeader('Professional Qualification');
htp.TableHeader('Work Experience');
htp.TableHeader('Request Date');
htp.TableHeader('Comments');
htp.TableHeader('Course Enquired For');
htp.TableHeader('Enquiry Tyep');
htp.TableHeader('Action Taken');
htp.TableHeader('Date Of Action');
htp.TableHeader('Status');
htp.TableHeader('Remarks');
htp.TableRowClose;
FOR j IN enqs LOOP
htp.TableRowOpen;
htp.TableData(j.or_reg_region);
htp.TableData(j.enq_no);
htp.TableData(j.first_name| |j.last_name);
htp.TableData(j.address| |j.address2| |j.address3);
htp.TableData(j.company);
htp.TableData(j.phone_off);
htp.TableData(j.phone_res);
htp.TableData(j.fax);
htp.TableData(j.email);
htp.TableData(j.qual_acc);
htp.TableData(j.qual_prof);
htp.TableData(j.work_exp);
htp.TableData(j.date_req);
htp.TableData(j.comments);
htp.TableData(j.course);
htp.TableData(j.enq_type);
htp.TableData(j.action_taken);
htp.TableData(j.date_action);
htp.TableData(j.status);
htp.TableData(j.remarks);
htp.TableRowClose;
END LOOP;
htp.tableClose();
end if;
end if;
end;
this is the plsql procedure....
procedure is working well in the portal
i want to call this procedure when i click the button and shows the value....
i thing u will understand after reading my
program....
after checking the cvalue i want to go to
new window,and that window should show the
value...
please
thanks in advance953006 wrote:
I would like to have a button that when clicked once, redirects the page to a URL in a new tab. The URL is based on a sql query from a dynamic action linked to the button.
Way 1:
I have tried to use redirect_url() in the dynamic action itself.
<pre>
htp.init;
owa_util.redirect_url('http://myurl.com');
</pre>
But it didn't work at all.
So I tried ...
Way 2:
1. In the dynamic action set a page item value to the url. This is Action 1 of the dynamic action.
<pre>
:P33_URL_ITEM := function_that_returns_the_url;
</pre>
2. Submit the page. This is Action 2 of the dynamic action.
3. Action 3 of the dynamic action executes the following JavaScript code:
<pre>
window.location.href="&P33_URL_ITEM.";
</pre>
However, the problem is P33_URL_ITEM is not set the first time (or whenever the session is cleared), so that the button has to be clicked twice in order for the page to be redirected.
Not-important question: Does anyone know how to fix it so that only 1 click is needed?
Can't you set the P33_URL_ITEM page item in a on-load pl/sql process? It is difficult to give a precise answer unless I see what you are doing the page.
Way 3:
Use APEX Branch.
Important question: Does anyone know how to make the branch open the URL in a new page?
This thread might help:
Open URL in new window when button pressed
Maybe you are looking for
-
How to find registered e-mail address for my skype...
Hello, I need your help, because I'm unable to find associated email address for my father's skype account. After changing his computer we are not able to login again. Is there an option to use registered phone number in order to veify his identity a
-
I am not Able To update My apps because The old Apple id keeps apearing.
-
I recently installed the fonts that ship with CS5 Web Premium. These are located in Content dvd in the Goodies>Fonts folder. the Open Type fonts look fine but all True Type fonts are pixelated...like the font isn't really there? Can anyone advise?
-
I assume you will be able to synch the new 4s in the same manner using a usb cable. The reason I ask is I can't quite wrap my head around how you could specify what to synch on the initial setup. I have tons of apps and music on my computer but syn
-
How many query possible in 1 second at Sql Server ?
Hello I have 30,000 records. Table have 10 columns. Columns have indexes if column at where condition. And select question will give 20-30 records as result. (select column1, column2,...... column10 from table where columnSecondID=2I. I will use host