UWL - Waiting for update message

Hi,
Can someone explain me what's the reason that UWL shows a 'Waiting for update' info message on top when opening UWL ? Until we press refresh-button the uwl seems to reload every 15 seconds. If we press Refresh button the 'waiting for update' message disappears ...
What does the message mean ? For which update is the system waiting ? Why does it show up every time the UWL is called ?
Regards,
Igor

When the UWL first appears it shows any entries in the UWL cache.  The waiting for update appears whilst it is trying to connect and retrieve items from the backend systems.
As default it should then reload every 5 minutes.. unless someone has changed the configuration on your system.
Paul

Similar Messages

  • UWL - waiting for update

    Hi All,
    How we can eliminate that message ? When we refresh it  the new item is appearing in Tasks . 
    Can we make it as auto refresh ? So that the waiting for update message can be eliminated and the new task can be seen when the user logins in .
    If we leave the screen for around 15 seconds , then also it is automatically going to tasks , where we can change the UWL refreshing automatic time ?
    Thanks,
    surya
    Edited by: surya on Aug 5, 2009 2:45 PM

    Hi Surya,
    First of all talking about having the latest tasks as soon as a user logs in Portal, as per my understanding, this is not possible. There will be some time delay always (as per the default/custom configurations).
    Secondly, regarding changing the UWL automatic refresh time, please try the options below:
    1) Change the Delta Pull Channel Refresh Period. For doing this, go to System Administration -> System Configuration -> Universal Worklist & Workflow->Universal Worklist Administration. Select the appropriate system and click on Edit button. Now change the time in Delta Pull Channel Refresh Period (in Seconds) as per your requirement.
    For more details, see:
    Universal Worklist refresh delay - Reduce default time
    2) In your Universal Worklist page, expand the menu on the top right hand corner (from where you refresh the tasks) and select Personalize View. Now under Data Properties, change the value under Page Refresh Rate.
    I hope you are able to solve your problem to some extent.
    Bye
    Ankur

  • Went to install Thunderbolt Firmware 1.2 on my imac and now the 'checking for updates' message is stuck.

    Hi everyone,
    I have an imac and had the update for Thunderbolt Firmware 1.2 ready on my app store to install. However, when I went to update it, my app store just keeps saying 'checking for updates' for the past two hours. I'm not sure if this is part of the Thunderbolt update?
    I know it originally warns you the computer will restart and a grey screen will appear with a progress bar, but I've had none of that. Just the 'checking for updates' message constantly going.
    Does anyone know how long this update takes and is this normal?
    If I click on the update for Thunderbolt again it comes up with a greyed out 'waiting' message to the left.
    Please help ...
    Thanks in advance.

    Ok, it seemed I could still click on the thunderbolt update so it was never going to do anything. I force closed the app store and now it's showing 1 update available like it was (for the thunderbolt).  Looks like the app store was just stuck trying to check for updates.
    I'll try again another time :-)

  • I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

    I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Wait for unread message on broadcast channel during import

    Hi All,
    I am trying to import a dump file on Oracle DB, Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
    My import hangs, below is the log.
    Import: Release 10.2.0.3.0 - 64bit Production on Tuesday, 03 April, 2012 21:09:20
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning and Data Mining options
    Master table "CIP_USER_PED1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "CIP_USER_PED1"."SYS_IMPORT_FULL_01": ****@** remap_schema=**** EXCLUDE=STATISTICS
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    Processing object type SCHEMA_EXPORT/VIEW/VIEW
    It doesn't proceed further.
    I am not seeing and sessions blocked or locked but I see session waits.
    SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
    MASTER     ACTIVE     468     Idle     wait for unread message on broadcast channel
    WORKER     ACTIVE     467     User I/O     direct path read
    select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='CIP_USER_PED1'
    and program like 'orac%'
    and s.saddr = D.SADDR;
    Below is the only message I see in alert log.
    Tue Apr 3 19:15:52 2012
    The value (30) of MAXTRANS parameter ignored.
    kupprdp: master process DM00 started with pid=22, OS id=23456
    to execute - SYS.KUPM$MCP.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1', 'KUPC$C_1_20120403191552', 'KUPC$S_1_20120403191552', 0);
    kupprdp: worker process DW01 started with worker id=1, pid=23, OS id=23458
    to execute - SYS.KUPW$WORKER.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1');
    I have googled but haven't been able to resolve the issue.
    Can anyone help me with this ?
    Many Thanks
    Kalai

    km1612 wrote:
    Hi All,
    I am trying to import a dump file on Oracle DB, Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
    My import hangs, below is the log.
    Import: Release 10.2.0.3.0 - 64bit Production on Tuesday, 03 April, 2012 21:09:20
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning and Data Mining options
    Master table "CIP_USER_PED1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "CIP_USER_PED1"."SYS_IMPORT_FULL_01": ****@** remap_schema=**** EXCLUDE=STATISTICS
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    Processing object type SCHEMA_EXPORT/VIEW/VIEW
    It doesn't proceed further.
    I am not seeing and sessions blocked or locked but I see session waits.
    SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
    MASTER     ACTIVE     468     Idle     wait for unread message on broadcast channel
    WORKER     ACTIVE     467     User I/O     direct path read
    select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='CIP_USER_PED1'
    and program like 'orac%'
    and s.saddr = D.SADDR;
    Below is the only message I see in alert log.
    Tue Apr 3 19:15:52 2012
    The value (30) of MAXTRANS parameter ignored.
    kupprdp: master process DM00 started with pid=22, OS id=23456
    to execute - SYS.KUPM$MCP.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1', 'KUPC$C_1_20120403191552', 'KUPC$S_1_20120403191552', 0);
    kupprdp: worker process DW01 started with worker id=1, pid=23, OS id=23458
    to execute - SYS.KUPW$WORKER.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1');
    I have googled but haven't been able to resolve the issue.
    Can anyone help me with this ?
    Many Thanks
    Kalaiproper invocation of procedure below will allow you to monitor progress
    by observing contents of resultant trace file
    DBMS_MONITOR.SESSION_TRACE_ENABLE(
        session_id   IN  BINARY_INTEGER DEFAULT NULL,
        serial_num   IN  BINARY_INTEGER DEFAULT NULL,
        waits        IN  BOOLEAN DEFAULT TRUE,
        binds        IN  BOOLEAN DEFAULT FALSE,
        plan_stat    IN  VARCHAR2 DEFAULT NULL);

  • STREAMS apply coord waiting for slave message?

    1- Oracle version 9.2.0.1
    2-I have 3 database (bd1,bd2 in th same machine, bd3 in an other machine)
    3- I have configured streams in order to have bd1--->bd2 and bd1--->bd3 streams replication
    4- The streams between bd1--->bd2 is ok.
    5-The propagation between bd1--->bbd3 doesn't work.
    6- i have asked yhe view v$session_wait in :
    into bd1 :
    SID SEQ# EVENT
    15 1359 STREAMS apply coord waiting for slave message
    20 622 STREAMS apply slave waiting for coord message
    into bd3 :
    SID SEQ# EVENT
    17 11399 STREAMS apply coord waiting for slave message
    19 5698 STREAMS apply slave waiting for coord message
    What have i to do to fix it and my propagation will work.
    Thank you a lot dear memebers

    The events: STREAMS apply coord waiting for slave message" and "STREAMS apply slave waiting for coord message" are IDLE events - they indicate that the apply process is waiting for work.

  • Retraction "Wait for Update" Setting

    Trying to find out what 'wait for update' option does?
    This is a setting for a cca primary cost retraction in the parameter group.
    Also, have a customer who says that retraction dropped a cost element?  Any comments?
    Thanks
    Tim

    It appears that the call is getting hung up  on the following url:
    /webdynpro/resources/sap.com/tcwddispwda/global/SSR/themes/sap_tradeshow/ur/ur_pop_ie6.css
    Does anyone know anything about this?
    Thank you

  • Err Session is waiting for a message

    Dear Experts,
    We have got the following error in our System Log.
    ERR: 37225: SAP-Basis System: Session is waiting for a message
    I have checked other logs and could not find the cause for the above error. If you know, please let me know.
    Thanks & Best Regards
    L Raghunahth

    Can you please explain how did you solve this? Im having the same problem

  • Getting "waiting for connection" message in Lightroom 5.5 sync to mobile

    I have tried turning off and on the lightroom mobile sync and signing out and back in. Neither started the sync. What else can I try ?

    mdjcrook,
    I think your sync being stuck and the 'waiting for connection' message were two different issues and would advise you - if you get stuck again - or anyone else reading this thread that is stuck syncing and with the 'waiting for connection' to NOT use 'Delete All Data'
    If you are seeing the 'waiting for connection' message and sync is working, ignore it as that bug just prevents properly showing the sync status but not the actual sync activity.  We are working on trying to figure out why this gets stuck in this state - it appears to be network related - but we haven't found anything definitive yet.
    If you are seeing the 'waiting for connection' message and you sync is stuck then please generate a diagnostic log (Preferences -> Lightroom Mobile -> (Hold Alt/Option key) and click 'Generate Diagnostic Log' and then private message that file to me and we can hopefully determine the real cause of the stuck sync and a workaround that will prevent you having to use the 'Delete All Data' hammer.
    Matt

  • I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    To show the battery percentage used go to settings
    from there click general scroll to usage and select
    scroll to bottom of page for battery usage select on.
    This will show the icon battery and the percent numbers on the top right.
    When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
    FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

  • "Waiting for IPad" message & seems stuck during update.

    Hi. I am in the process of updating my IPad from software version 3.2.2 to the current version.  My computer took over an hour to download the update and now has been stuck for hours saying it's "waiting for IPad" and that ITunes is updating the software.  The IPad has the Apple icon and a download bar which has not progressed at all.  I am concerned the upgrade has got stuck and I don't know what to do next.  Any ideas of what to do will be gratefully appreciated please.

    Hi.  Thanks for your suggestion.  I have tried it but it hasn't worked.  It realises it's in recovery mode but when I go to restore it, it goes back to the original problem.

  • HT1212 My iPad was locked & disabled & tried every possible way to restore but nothing is working - After select Restore, & waited for updates to finish, gets iPad Cannot be resotred at this time because server could not be contacted - Pls help

    Friends,
    My iPad2 was locked and disabled because my kids entered several times the passcode and now it is locked. I tried every possible ways and read all related items and followed precisely articel http://support.apple.com/kb/HT1212 but after i restored and update teh iPad, itunes keeps giveing me the same message:
    The iPad "iPad" cannot be restored at this time because the iPad software update server could not becontacted or is temporarily unavailable.
    I tired at different time of teh day and noght and different days yet kept getting the same message.
    Pls assist me as now the iPad is useless
    Regards,
    Joe

    If reset doesn't work, try and force the iPad into Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • EPMA 11.1.2 Essbase Hangs at status waiting for Update

    I know that in 11.1.1.3 there were issues deploying an essbase cube from EPMA, 11.1.2 however claims to be able to do this, but I am having a problem getting the cube deployed.
    I am on 64-Bit Windows 2008, all hyperion products are version 11.1.2 with SQL backend.
    I can validate a simple cube just fine from EPMA.
    I can create cubes in EAS.
    I however cannot deploy a simple cube from EPMA. I have checked all conditions on permissions and followed the guidelines.
    The essbase application is registering to Shared Services (thus I can make sure the permissions are Provisioned).
    The system gets stuck at "Waiting for Status Update..." it will remain at that level (50%) without ever updating. I have changed the awproperties file to time out after 45 minutes. I am not seeing any errors recorded in any of the logs to indicate what problem is going on.
    I need some suggestions as to where to look to force some form of error logs that will give me some clue to the next errors I need to deal with. Or some advice from anyone that has experienced this issue. This is an essbase cube not a planning application. I have EPMA HFM Applications, as well as FCM, FDM deployed on the same foundation without issue.
    The only issue I can find close to this is a Planning deploy with problems about JVM size but nothing about Essbase application JVMs.
    Any ideas?

    Is this an essbase only application? It seems like the property is defaulting to stored and then flipping the initial stored member to shared because Essbase isn't interpreting the deployment correctly. I would try using ShareData as the datastorage property (I think that is the correct spelling). Also, I believe the correct way to set IsPrimary is Y/N and not 0/1.
    If that did not work I would try the following in this order:
    1 - I would first extract the dimension in question using the file generator and confirm that the properties are indeed correct.
    2 - If they were correct. I would toggle the dimension from shared->local->shared. EPMA is still a little nutty and this will fix a fair amount of issues as it will 'refresh' the application's version of the dimension. I would then deploy
    3 - deploy from EPMA->Planning only (no essbase creation), then deploy to essbase separately after ensuring the property represents itself in planning. If it is essbase only - create the outlnie instead of refresh.
    4 - create a duplicate app in EPMA and deploy the copy of the app - and see if it has the same problem
    Try that and see how it goes.

  • Do I need to wait for update?

    A friend of mine gave me this iPad 2 long time ago and it is a iOS 4. I barely use the iPad. So today I wanted to install games such as pvz2 but it said it need iOS 5 or more. When I went to my MacBook to update it. And I click "check for updates" all it say is "This model is iOS 4" I kept on clicking it but when I read the word below it. It say iTunes will check for updates in 12/12/2013 so I did in the next day but it also say the same thing as previous day and it say iTunes will check for updates in 19/12/2013. And the problem is should I wait?

    this is what it say

  • TS4268 iMessage and Facetime have a "Waiting for activation" message.  What do I do?

    Facetime and iMessage have a "Waiting for activation" error message in the setting section.
    Need help figuring out what to do.

    iMessage is currently down.  You can always check system status at:  http://www.apple.com/support/icloud/systemstatus/

Maybe you are looking for