UWL workitem does not open ISRFormApprove application - isr/PCR - MSS BP
We have configured the UWL based on the standard UWL config. guide. The standard itemtypes for MSS which launches the ISRFormApprove application (TS91000075) is part of the xml config. This was working properly when the ABAP stack and Java stack were on the same server (xR2DB1). At that time the ISR webdynpro applications were on the same server (xR2DB1). Now the ISR webdynpro applications are on the portal server (xE2DB1). When we try to open the workitem it looks for the application on xR2DB1 instead of xE2DB1. The error we get is
*********error start
Service cannot be reached
What has happened?
URL http://xr2db1.xx.xx.com:8000/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrFormApprove call was terminated because the corresponding service is not available.
Note
The termination occurred in system xR2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:xR2DB1_xR2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
*********error end
If we try to use a system in the portal that points to xE2DB1 we get the following error when trying to register this new webflow system in the UWL admin -
System SAP_WebDynpro_XSS: Thu Jul 10 12:18:31 EDT 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Jul 10 12:18:31 EDT 2008
(Connector) :com.sap.mw.jco.JCO$Exception:'ashost' is missing
Need help understanding how to make the change in configuration so that when an approval workitem is clicked in the UWL it looks for the ISR applications on the portal server and not on the ECC server.
Version info:-
EP7 SP15, NW04s (server = xE2DB1)
ECC 6.0 (server = xR2DB1)
MSS BP (mySAP ERP 1.0)
Thanks in advance for your help.
We were able to resolve our issue.
On our portal system we had to change the configuration of the system definition for the backend to use the WAS for the portal.
System Configuration > System Landscape
Pick your system definition
Property Category: Web AS
Description, Hostname, Path should be set appropriately for the portal.
Ex:
Desc: Arbitrary
Hostname: portal_host_name:port
Path: /webdynpro/dispatcher
Similar Messages
-
Does not open the application tab
does not open the application tab
http://adobe.ly/1h3Ng0c
How resolve???Hello SnNick,
Rename the opm.db file.
Close the Creative Cloud application if it's running.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
Rename the opm.db file to opm_old.db
Launch Creative Cloud
Make sure that you unhide the hidden files of your computer or else you will not fir "AppData" folder.
Do let me knew if it worked or not.
Regards,
Ratandeep Arora -
Iphone 4 does not open any application it happened when i updated my iphone4 in my mac book pro
iphone 4 does not open any application it happened when i updated my iphone4 in my mac book pro
Install a free app. Click App Store app, find any free app you might like, install the app. If still problems, try a Reset, hold both Home and Power buttons until the iPhone restarts.
-
I have implemented workflow for releasing blocked invoice.In quality it is working perfectly fine but in production ,though the agent is receiving the workitem in his inbox but he is not able to open that work item. I have checked all things each and every thing has been transported from quality to production.I have also verified that the agent receiving the work item has the authorization for opening that item(TCode-MIR4). I am not able to find out where the problem is and how I can rectify it.
Hi,
Once the user clicks to execute the workitem does he get a message saying "No Administrator foound for the task"? If yes then go to the menu Settings->Workflow Settings->Refresh Organizational environment. It will work. If you get any other message let us know. We might be able to troubleshoot better.
Hope this helps,
Sudhi -
Element's 6.0's Bridge does not open - says application "unexpectedly quit"
Hello. I am unable to open Bridge CS3, which came with my Elements 6.0 for Mac software that I purchased brand new a month ago for my new MacBookPro.
The program was working fine until a couple of days ago when, while uploading images to my Smugmug account (which I had done many times before, with this particular program and the new computer), it completely froze and I had to hard-quit it. Now, I am simply unable to open Bridge, and I get instead this message when I try to do so: "The application Bridge CS3 has unexpectedly quit."
I am new to this forum and I'm not an expert in Photoshop at all, so I'd like to see if anyone has any thoughts on what I should do?
I've done google searches and some people suggest downloading the latest updates to my particular program, but I can't find Elements 6.0 in the updates section of the Adobe website (I can only find Elements 8.0), and since I can't open Bridge, I am unable to try to get updates through the program itself.
I will appreciate some advice on this. Thanks.
Rob
Arlington, VATry resetting your Adobe Bridge preference files. I think on the Mac you can just press and hold in the Option key as you launch Bridge to get the preference dialog to come up. (Windows will do it with the Ctrl key.)
If the Option key shortcut is incorrect, press Command + Option + Shift keys as you launch. If you prefer to do this manually:
http://kb2.adobe.com/cps/332/332992.html
If a reset of the preference file alone doesn't work, I'd check all of the Bridge boxes in the reset dialog and attempt to launch Bridge again.
I believe Photoshop Elements 6 for Mac includes the same Bridge application as CS3 so I think you should download the update for CS3 Bridge if you prefer to do it manually.
http://www.adobe.com/support/downloads/product.jsp?product=108&platform=Macintosh
If these suggestions don't work, I'd recommend asking in the Bridge for Mac forum.
http://forums.adobe.com/community/bridge/bridge_macintosh -
Although clicking the App Store icon in my Dock works, clicking the App Store . . . selection in the Finder menu doesn't do anything. I created a second user account and the Finder Menu worked as expected.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
I have turned it off. I have charged it. Its like the system is thinking. The wheel spins and then the charge dies. Please help.
If the iPad connects to iTunes using the same cable and USB port:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Does it charge when connectes?
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Adobe Help (F1) Does Not Open - Applies to All Applications in TCS 3.5
I've installed version 3.5 of the Technical Communications Suite (TCS) on a windows XP 32 computer. All of the applications open as they should but the HELP for each application does not open. Any suggestions?
So you've copied the contents of the DVD into some folder on the server & then are running the installer at a workstation by browsing to it on the server drive. Does the workstation have full admin rights? Remember, if installing on Vista or higher, you have to manually "give" yourself full rights to your C:\ drive - it doesn't happen automatically like it did with XP.
I'm still not positive that installing this way will work correctly. If you think it is, try running the AIR runtime (freebie off the Adobe website) on the workstation & see if the help appears.
Oh & the workstations have access to the internet, right? If they don't, then you'll definitely need to contact Support to get activated. -
I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11. I selected the option to edit in another application. But when I select edit in iPhoto, elements opens but the photo does not open in elements. I'm using a Macbook pro 15 inch with retina display with OS 10.8.4 What is the problem?
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/
It relates to Elements 10, but it's the same for 11. -
Workitem is not opening in UWL configuraton
Hi,
In my project UWL configuraton has been done newly..
When my workflow is getting triggered an workitem is generated for user decision task(General) and its coming to sap inbox and working fine for approval/reject.
But when the same workitem goes to UWL..its appearing there but when users click on the workitem its not opening...just rendering and wait ... I am unable to understand why the WI is not opening in UWL only while its working fine in sap inbox.
Can anybody what is the reason for that...is it for portal issue? or ADS connection issue or workflow Task issue?
Any help will be appriciable...
Thanks,
Biswajit.Please do not cross post the same question in multiple forums.
-
my ipod touch 4 camera icon has disappeared and even does not open in any applications.. have restored it and its running on 4.3.5 not jailbroken pls help??
it does not even appear in the search barIs the Camera turned on in Restrictions? Go to Settings>General>Restrictions.
-
One of my applications does not open. how can i delete and reinstall it?
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
Hi I am trying to open Illustator CC 2014 but it only opens Adobe Application Manager but it does not open any window. It's on a mac. Please help!!
Hi Henry,
Can you please also confirm the Mac OSX version?
Regards,
Sumit Singh -
I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.
It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.
-
My applications does not open only working apps are safari and finder
Since the last update my apps does not open. I dowloaded yestaerday an app from the app store and it does not open it generates an erron message
That did no t work I also download a new app from the app store and it does the same thing. It just generates the error message that the application quits unexpectedly and that the report was sent to Apple.
Maybe you are looking for
-
How do I upload a photo to my profile on a web page?
I am using Lion OX and iPhoto 11. I have a profile page on one of my programs and need to upload a photo. I have been so far unsuccessful. I follow the directions on the particular page I am trying to upload to: i.e. 'Choose Photo' and then
-
Unable to install Photosmart B-209a on Win 8.1
Trying to install full feature sw for existing b-209a on a new Lenovo Yoga 2 Pro running Win 8.1 64. Have tried the installer and it downloads the full sw. After extracting nothing happens, no screens, no directions etc... Have also manually downloa
-
Has anyone done this update? Is this update worth it? what are the main features of this updates?
-
Cannot install solaris 8 for intel
i boot a machine which has a AIC 7899 card using install CD, then choose add driver using a floppy made by downloaded ultra160 driver floppy image. the SCSI card and a hard drive thus can be found and i make two partitions,about 1G and 5G respectivel
-
Maximum word/character count in description
Just wanted to ask if anyone knows if there is a limit to the number of character/words for the podcast description that appears in iTunes.