V-cast setup issue; turning USB storage off

.I am trying to use V-cast. Media Manager. 
I've installed the app on my Droid X and on my desktop. I have the USB cable connected and  I have V-Case MM open on my desktop. Everything seems to be set to "Go" until I launch V-cast on the phone.
When I do that I get the following error: "Memory card error, card mounted or not present.  Please make sure memory card is inserted and USB storage is turned off."
I know the card is present, and mounted because the Droid X comes with the card already installed. 
But I went to "Settings/SD card & phone storage settings" just to be sure.  It shows "Total space 14.87GB" and "Available space 14.80GB", and an "Mount SD Card" option.  "Internal phone storage" shows 6.22GB of available space.
Now here's the rub. 
When I plug in the USB cable in the SD card data information changes to "unavailable" and the "Unmount..." option changes to "Mount SD card".
I'm guessing the issue is with the last part of the error message: "USB storage is turned off" but I don't know how to turn it on.
What is USB storage?  Is it to off site storage option Verizon offers?  Am I required to "Subscribe" in order for this app to work?

I believe you have to be in PC Mode not Mass Storage...  Try changing that under mount options.

Similar Messages

  • EA6350 usb storage problems

    I have a WD Mybook 3tb drive setup as my usb storage, and it is very unreliable. At times it works fine, but is unusble a large majority of the time. As in, it can't access a single file on the drive. It doesn't seem to be related to access either, as it sometimes happens under heavy usage, other times accessing a file at a time. The drive had no problems when plugged into a computer.
    All of my settings are default, no secure access, no media server or ftp server, no media prioritization.

    I recommend trying this, it maybe trying to catalog that size of information and may take a while. Do a reset sometime at night before you go to bed, Set up the router again and enable the drive on the router. Let the router and the drive be alone over night and check back in the morning. Let the router do it's cataloging of the drive. It should be done by morning. Look at the drive light in the morning. If it's still blinking, the router maybe still accessing the drive and it's contents. 
    The more you put on the drive the longer it may take the router to catalog the drive and it's contents. I personally don't use USB drives on the router unless they are small drives. I prefer using wired LAN NAS for any storage solutions. 

  • E4200 USB Storage Issue - Connection drops / router hangs

    I'm having issues with maintaining a reliable connection to the USB drive connected to my new E4200.  Here are the situation:
    (1)  I can successfully share the drive and map it from any computer on the network as expected
    (2)  After mapping the drive, I try to copy files/folder to the mapped drive.  It starts off ok, but within a few seconds/minutes, I'll begin getting the message "the specified network name is no longer available".  The drive status will show "disconntected" or "reconnecting"
    (3)  When this happens, the router will often stop accepting new connections (i.e. the DHCP function stops working).  However, some of the computer that are connected continue to work / have internet access.
    (4)  Restarting the router (i.e. pulling the power and plugging it back in) gets things working again.  Things are good until I try to map the drive and begin copying files again.
    Here's some other parameter info:
    (a)  I'm running the latest (only) firmware available: 1.0.00 build 13
    (b)  Per Linksys support, I've reflashed the firmware.  Didn't make any difference
    (c)  I'm working in a wired environment (this is not a wirelss issue...although it happens via wireless the same way)
    (d)  I'm running Win XP SP3 (have also tried on Vista HE 64...same results)
    (e)  The USB disk is a Seagate FreeAgent 1.5 TB (which is on the list of compatible devices for this router)
    (f)  I do most of my work at the command line with NET USE commands.  The files are being copied via ROBOCOPY and or XCOPY.  Just basic scripting.  Note:  I get the same results if I use Windows Explorer to map/copy files.
    (g)  I've validated the Seagate drive is not the issue by plugging in the the computer and using it for several days.  Have had no issues copying files to it  It's formatted as NTFS.  Chkdsk and SeaTools show no issues with the drive.
    (h)  I am copying large volumes of data (i.e. entire folders of movies, backups of "USERS" folder, etc.).  
    (i)  It's not any one paritcular file or folder this issue occurs on.  It will make a little progress, then flake out.  Upon restarting, it will make a little more, then flake out, etc.
    (j)  Just to be safe, I turned off the sleep mode/spin down option on the FreeAgent drive to ensue that wasn't the problem.
    (k)  I haven't made any elaborate router settings (haven't changed many defaults).  Haven't turned on FTP, Media Server functions, etc.  I've just done some basic things like (1) change the ssid (2) set up some DHCP reservations (3) changed the security to WPA2 (4)  changed admin password (5) set up port forwarding for two apps.  I've not created any policies, turned on guest accounts, enabled logging, etc.
    (l)  I am doing all of the above with an admin account (on the router, I created an admin user acccount for myself).  I've been careful to always map the drive with that userid/password.
    Is anyone else having reliability issues with access to thier attached USB storage.  I was very hopeful that the storage attached to the router would be readily available.  I'm not expecting or needing great performance, but do need it to be "always on" for the purposes of sharing files and executing backups.  Eventually, I would like to use some of the other features of the router (streaming video the PS3 and external FTP access for example).  However, for now, I just want the attached storage to work.
    Thanks in advance for your advice.

    oops, well now i see your full question. i asked you some ?s in the other thread you posted in.. but they seemed to be answered here..
    ok, solely speaking about this E42 router, i have had it for 2 weeks now and i had a buffalo 500gb drive on the usb port. i had all sorts of junk on the drive..just random files, etc, and the ones that were supported by the PS3 would stream fine form the drive. i even have a sony BD player (s770) and its able to see the files and drive and stream. the PS3 is wired and the BD player is wireless. i have a laptop (wireless) and it has the same results.
    last night i purchased a seagate go flex 2TB and plan to ONLY put media type files on this drive and try and clean things up and stop being lazy.. so far i have transferred a FEW small video and audio files from a wired computer with zero issues.
    now let me ask, when you are transferring these huge files, are you like copying a folder and pasting it onto the mapped seagate drive? or are you doing individual files, etc? i dont have a folder with a bunch of GBs of files but i will try and see if i can reproduce the problem you see.
    however thus far with the few small media files i have transferred on this new go flex 2TB drive, they have all transferred over. im talking about a couple GBs worth -ish...

  • HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any sugg

    I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any suggestions

    If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
    Best of luck.

  • Lennovo A1 " Turn on USB storage problem"

    Hi Lenovo community..
    I just want to ask if you could help me resolve this issue. When I connect my A1 tablet on any pc for file transfer. the "Turn on USB Storage " just keep on spinning. When I tilt the screen the "Turn on USB storage" spears and same result. It keeps on spinning.
    Sometimes my pc detects the tablet but I can't open the local disk assigned.
     Please help me

    Hi
    Welcome To Lenovo Community
    You may need to install the correct drivers for USB
    http://www.tinybeetle.us/A1_USB_Driver_20110816.zi​p
     Extract that to a folder and then point windows to that folder when it does the driver search.
    http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-​Tablets/Ideapad-A1-Windows-7-USB-Connection/m-p/59​...
    Hope This Helps
    Cheers!!!
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with Kudos!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

    My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

    Here are Apple Steps: http://support.apple.com/kb/HT1808

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

  • HT1414 My iphone 4s has frozen up and will not turn on or off. Keeps showing itunes symbol and my usb plug. reinstalled itunes and tried to restore but can't.

    My 4s iphone has frozen up and it will not turn on or off.  I have deleted the old itunes and reinstalled new itunes.  Then I tried to restore but to no avail.  It just keeps showing itune symbol and the usb plug on the phone. 

    Here are Apple Steps: http://support.apple.com/kb/HT1808

  • My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    Delete some apps, files, photos, videos, movies, etc to free up some space.
    How much space is your Other using? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • I turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. How do i fix it?

    i turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. how do i fix it?

    Check your cable whether it is good. If it is use the wall plug to charge at least half an hour. See how it goes.

  • On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

    On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

    Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing.  You won't lose any data by doing this.

  • I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. Any ideas?

    I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. It doesn't happen all the time but is very annoying. Any ideas?

    Reset the SMC and PRAM, if the issue continues then you likely have a failing GPU (hardware) that requires repair. To be sure take it in and have it professionally assessed.
    Intel iMac SMC and PRAM resets

  • I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud. help?

    I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud.
    Please assist
    Thx

    You don't really delete app that way, that way to stop backup for that app in icloud.
    You need to delete it from your home screen and then while it still will look like download from icloud - app will start fresh.
    However if app uses any account sign in the stuff that is attached to sign in will come back, so if you do not want to you need to use
    fresh account as well.

  • Apps to USB Storage issue on A2107A-f

    Running in to an issue trying to move apps to USB storage.  When I move the app to USB storage, the icon disappears from the display screen. The app is still on the device and can be found if I look under the App folder, but no longer shows up on the customizable screens.  On the other hand, any apps that remain under Tablet storage still show up on the customizable screens. This wouldn't be such a problem for me if it wasn't for the fact that of the 8GB storage on this device, 2.29GB is allocated for internal or Tablet storage.  So, it doesn't take long to fill up that space with apps.
    Would appreciate any help.  I did try calling Lenovo tech support and that was fruitless.

    I have the exact problem. There is no solution according to my tech.
    Moderator comment: Post edited to conform with the Community Rules.

  • SP Products Config Wizard fails for Socket Error Connection Refused - New Azure Setup (firewalls turned off)

    Hi all,
    I'm using this guide: "Step-by-Step: Build a FREE SharePoint 2013 Dev/Test Lab in the Cloud with Windows Azure Infrastructure Services" by Keith Mayer 15 Jul 2013 6:30 AM over on TechNet.
    And I'm currently in "Exercise 5: Configure SharePoint Server 2013 in a Windows Azure VM" steps 16/17.
    When I try to create a new server farm following those instructions, the process fails.
    The dialog window states:
    "Configuring SharePoint Products"
    "Performing configuration task 3 of 10" <- gets stuck here for a while and then I get the error below: 
    The error from the PSCDiagnostics log is:
    Trying to see if port 14387 is free on machine [my sp server]. Min port we will try is 1024, Max port we will try is 49151
    05/14/2014 16:43:26 1 INF A SocketException was thrown with SocketError ConnectionRefused
    05/14/2014 16:43:26 1 INF Connect has been refused for port 14387, so we will consider this a free port
    05/14/2014 16:43:26 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
    05/14/2014 16:43:26 1 INF Adding port 14387 to the exclusion list so it is not chosen again during this run
    [snip]
    05/14/2014 16:48:22 9 ERR Task configdb has failed with an unknown exception
    05/14/2014 16:48:22 9 ERR Exception: System.Data.SqlClient.SqlException (0x80131904): A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.) ---> System.ComponentModel.Win32Exception (0x80004005): The semaphore timeout period has expired
    I've turned Windows firewall off on the SP Server, SQL Server and the AD Server (temporarily of course) and I've given user mydomain\sp_farm local and domain administrative rights as well as full rights within the SQL db.
    I can ping from/to the SharePoint/SQL servers and get a response using the host name for each (the internal IP's 10.0.0.5/6 respond).  If I use the DNS server names, the pings fail.
    However, after the SharePoint wizard fails, I can see on the SQL server that db SharePoint_Config (default name from SP wizard) is created.  So it looks like the SP wizard can connect because the db is being created.
    Is this a timeout issue even though the log file shows "SocketError ConnectionRefused"?
    Any ideas on how I can resolve this error?
    Thanks.

    Hi Gary, 
    For this issue, I'm trying to involve someone familiar with this topic to further look at it. 
    There might me some time delay. Thank you for your understanding.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for

  • The audio is not working

    I have a HP Pavilion dv6 with windows 7 64bit system.  everything was working fine untill the audio just quite. trouble shooting shows the drivers workin properly No error msg, no sound    This question was solved. View Solution.

  • Some recurring appts created by iPhone cannot be erased in Outlook 2007

    Background: iPhone 8gb setup on Mac G5 with iTunes. iPhone was then synced to my PC running Vista and Office 2007. Everything went great, but I foolishly merged all my Calendar reminders from my Mac G5 to Outlook 2007. The problem is that both the "D

  • Sales Depot - Config. for MM

    Hi All,     Goods Procure from Vendors outside India & This goods are being shipped to the Plants or Depot at near by places & from that depot sale is happening. This is the scenario.    I like to know the Configuration Part that has to be taken care

  • How do I troubleshoot itunes download

    I'm trying to reload itunes after a harddrive rebuild. itunes it telling me I'm not the admin, but 'm the only registered user and noted as admin on the control panel.

  • Keeping Groups and their Details together when printing a report

    So I created my Groups...[Claim #], [Rec #], [Line #], and [Service_Date] and set the Group Properties Page Break and checked Between each instance of a group. I also made the Keep Together property to True for all my Row groups and details then. Whe