V$lock, sys.obj$ very slow

Hello,
I need to fetch wait time by object and that is why the query below. The problem: it takes forever :( any suggestions?
select vlock.ctime, vdb.name,sysdate
from v$lock vlock, sys.obj$ vdb
where block = 1
and type = 'TM'
and id1 = vdb.obj#
order by ctime desc
Thanks,
R

Hi,
This query should run, its not a heavy query. There could be other database related reasons which could be causing this.
Below is useful link which can give some good information (see posts from June 11, 2003):
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:839412906735
Or just give RULE hint a try if you are using 9i and above.
select */*+ RULE */* vlock.ctime, vdb.name,sysdate
from v$lock vlock, sys.obj$ vdb
where block = 1
and type = 'TM'
and id1 = vdb.obj#
order by ctime desc

Similar Messages

  • Premiere Pro CC locking up and very slow to load bigger projects

    I am having a problem with premirepro cc locking up and very slow to load bigger projects.
    Windows 8 machine

    I am having the EXACT same issue and now we are WAY behind deadlines.  We have Adobe for Teams on 3 computers, all are HPZ820, Dual Proc with Intel(R) Xeon(R) CPU E5-2650 @ 2.00GHz, 32 GB RAM, Dual Video Cards Quadro 6000 4GB, Windows 7 64 bit with all the latest patches.  Everything worked on the first release of 2014 but last week there was an "update" to Premiere.  Since this update, projects work for a short period.  When you start a new project and add footage, you can scrub the footage and play the footage with no issue.  But the more assets you add, simple Titles, it slowly starts to fail.  Playing the timeline starts and stops and then finally the end result is you can't even play the timeline.  The Program window is frozen.  I have even tested starting a new project, adding assets one by one but no matter what, I get the same results. 

  • POP3 mail servers locking up and very slow!

    POP3 mail servers locking up and very slow! What is the deal with this? Verizon does not monitor these situations? Residential mail a low priority. Businesses run their own servers. Now we are back to having server issues again with Verizons Email? Last time mail was being delayed and now servers connect and lock up!

    FWIW I am not experiencing any slowdowns or lockups on email. I Just checked two of my Verizon email accounts and no problem. But it is almost an hour since you posted so maybe Verizon fixed something?
    Justin
    FiOS TV, 25/25 Internet, and Digital Voice user
    QIP7232, QIP7100-P2, IMG 1.9.1
    Keller, TX 76248

  • "Locking existing frames" very slow

    When RAM previewing in the latest CC 2014, it says "Locking Existing Frames" for about 5-10 seconds every time, even if all the frames in the work area are already rendered.  Sometimes the green bar indicating rendered frames disappears immediately after hitting RAM preview again.
    I can't seem to reproduce the problem in another project.  I have 64 GB of RAM in my 2012 Mac Pro and an SSD for my disk cache (which I've also tried turning off with no effect).  An old post on here said people had this issue with CS4 and it was usually fixed by turning off audio and/or video layers.  This did not help.  I deleted all footage and audio so it is just two precomps with illustrator files and shape layers mostly.  Some 3D layers, but nothing crazy.  If I RAM preview the precomps they don't have this problem, it's just in the main comp where I have them sequenced together.  The main comp I'm trying to render is a bit long (2+ minutes) but I tried trimming it down to 10 seconds and this didn't help much.  I have Open GL and Render Multiple Frames Simultaneously off as well.  I tried duplicating the comp and when that didn't work I imported the project into a new, clean project file.  No luck.
    Anyone else having this problem and found a solution?  I'm open to any ideas.

    Thanks for the response, Rick.  I'm on OSX 10.9.5 and AE CC 2014.1.1 Version 13.1.1.3.
    I actually already deleted all of the footage out of the main comp and out of the two precomps I left in there.  The footage I had in there before is Quicktime 1080 ProRes 4444 using RGB+A which I've used many times before without this issue.  There are no audio files in there either.
    I am doing some character animation and other stuff with Illustrator CS6 files and shape layers.  There are some nulls and solids and quite a few expressions for the character rigs (IK, etc).  Some 3D layers and cameras are involved.  I'm using very few effects- mostly fills and tints and the Puppet Tool.
    Anything else you need to know?

  • My iMac 27 alte 2013 running very slow and locks up on shut off window

    I have an iMac that is very slow all theme, requires lots of restarts, and when re-starting the black screen locks up with the white stripe logo rotating and I have to manually shut it off.
    Here's the EtreCheck report. Any help is appreciated...
    Problem description:
    iMac really show….
    EtreCheck version: 2.1.5 (108)
    Report generated December 26, 2014 at 11:43:28 AM GMT-5
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (27-inch, Late 2013) (Verified)
      iMac - model: iMac14,2
      1 3.4 GHz Intel Core i5 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      NVIDIA GeForce GTX 775M - VRAM: 2048 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:4:54
    Disk Information: ℹ️
      APPLE HDD WD10EZES-40UFAA0 disk0 : (1 TB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 999.35 GB (251.05 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/EyeTV.app
      [not loaded] com.elgato.driver.Pluto2 (1.1) [Support]
      /Library/Application Support/Roxio
      [not loaded] com.roxio.TDIXController (1.7) [Support]
      /System/Library/Extensions
      [not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchVoyager (1.1) [Support]
      [loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.68) [Support]
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.68) [Support]
    Launch Agents: ℹ️
      [invalid?] com.brother.LOGINserver.plist [Support]
      [running] com.canon.MFManager.plist [Support]
      [running] com.logmein.logmeingui.plist [Support]
      [running] com.logmein.logmeinguiagent.plist [Support]
      [not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
      [running] com.rim.BBAlbumArtCacher.plist [Support]
      [running] com.rim.BBLaunchAgent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [running] com.logmein.logmeinserver.plist [Support]
      [invalid?] com.logmein.raupdate.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.rim.BBDaemon.plist [Support]
      [failed] com.vmware.launchd.vmware.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      RoboFormIcon Application (/Users/[redacted]/Library/Application Support/RoboForm/RoboFormIcon.app)
      ScanSnap Manager Application (/Applications/ScanSnap/ScanSnap Manager.app)
      InstUtilLaunch UNKNOWN (missing value)
      BlackBerry Device Manager Application (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
    Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.0 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.3.4.1 [Support]
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      Unity Web Player: Version: UnityPlayer version 4.1.5f1 [Support]
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      LogMeIn: Version: 1.0.961 - SDK 10.7 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      LogMeInSafari32: Version: 1.0.961 - SDK 10.7 [Support]
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      GarminGpsControl: Version: 4.0.1.0 Release - SDK 10.6 [Support]
      SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 [Support]
      MagellanPlugIn: Version: 1.0 [Support]
      DirectorShockwave: Version: 11.5.9r615 [Support]
    Safari Extensions: ℹ️
      RoboForm [Installed]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoPro  [Support]
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 748.30 GB
      Destinations:
      Data [Network]
      Total size: 3.00 TB
      Total number of backups: 15
      Oldest backup: 2014-11-24 03:47:04 +0000
      Last backup: 2014-12-25 21:12:07 +0000
      Size of backup disk: Excellent
      Backup size 3.00 TB > (Disk size 999.35 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          1% loginwindow
          0% fontd
          0% BBLaunchAgent
          0% launchservicesd
    Top Processes by Memory: ℹ️
      258 MB firefox
      155 MB mds_stores
      137 MB Finder
      120 MB ScanSnap Manager
      86 MB Dropbox
    Virtual Memory Information: ℹ️
      13.47 GB Free RAM
      2.05 GB Active RAM
      548 MB Inactive RAM
      1.11 GB Wired RAM
      1.41 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 26, 2014, 11:39:06 AM Self test - passed
      Dec 26, 2014, 08:59:56 AM /Library/Logs/DiagnosticReports/Scan to Folder_2014-12-26-085956_[redacted].hang
      Dec 25, 2014, 08:54:59 AM /Library/Logs/DiagnosticReports/Installer_2014-12-25-085459_[redacted].hang
      Dec 25, 2014, 08:53:32 AM /Library/Logs/DiagnosticReports/Installer_2014-12-25-085332_[redacted].hang

    I would try a Safe Boot  OS X: What is Safe Boot, Safe Mode? - Apple Support be paitient it takes longer. When its booted up you can just restart normally.
    Forcing shutdowns can cause disk corruption. Even though EtreCheck doesn't report any disk errors I would run Disk Utility from your recovery partition (Command-R restart) and repair the startup disk and repair permissions.
    I also recommend removing the BlackBerry software, it's been known to cause problems.

  • Adobe has upgraded itself (now red) relates very slow at best,locks up and just does not work.Is the

    Adobe has upgraded itself( now red prompts ) and it operates very slow at best. it also locks up. Can I go back to old version or is there a fix?

    Seem to have one more issue, when in documents and wish to move document to a folder. If I am require to scroll down to find a folder adobe closes on its own. Do you have any thoughts on this issue/
    REGARDS

  • Site is very slow-Dead lock in database?

    Hi Friends,
    DB version:10.2.0.1
    OS:RHEL
    I have a table whose structure is as below
    SQL>desc prod
    Name Null? Type
    ID NOT NULL VARCHAR2(40)
    TITLE VARCHAR2(500)
    VALUE VARCHAR2(2000)
    Column ID has two contarints primary key constraint and check constraint.
    Actual problem:
    ================
    One of our site is very slow and as a i DBA i have checked the alert log file of the database and found the error
    Wed Jul 7 01:26:50 2010
    ORA-00060: Deadlock detected. More info in file /u01/app/oracle/admin/PUBDB01/udump/pubdb01_ora_25844.trc.
    I checked the trace file and found the information as below.
    DEADLOCK DETECTED
    [Transaction Deadlock]
    Current SQL statement for this session:
    DELETE FROM prod WHERE id = :1
    The following deadlock is not an ORACLE error. It is a
    deadlock due to user error in the design of an application
    or from issuing incorrect ad-hoc SQL. The following
    information may aid in determining the deadlock:
    Now i want to know the reason behind the slowness of the site is because of the deadlock which i have found in the database or some thing else. If the reason is because of the deadlock then what i have to do that SQL statement inorder to perform it optimally.
    Please need your help and suggestions.

    Get statspack/AWR running at regular intervals.
    Deadlocks are resolved instantaneously by Oracle itself - I don't think that could cause the entire site to slow down.

  • Database is getting and running very slow

    Hi All,
    I am working with a bank.
    Our PROD database gets hang everytime and we have restart the database everytime whenever it gets hung.
    Whenever we run EOD, It takes 18 hrs to complete.
    Database version: 9.2.0.4
    I have pasted statspack report below.
    Snap Id Snap Time Sessions Curs/Sess Comment
    Begin Snap: 105 07-Jun-11 14:19:01 268 16.7
    End Snap: 106 07-Jun-11 14:22:56 290 17.5
    Elapsed: 3.92 (mins)
    Cache Sizes (end)
    ~~~~~~~~~~~~~~~~~
    Buffer Cache: 3,072M Std Block Size: 8K
    Shared Pool Size: 400M Log Buffer: 5,120K
    Load Profile
    ~~~~~~~~~~~~ Per Second Per Transaction
    Redo size: 113,840.43 11,452.27
    Logical reads: 13,517.63 1,359.86
    Block changes: 734.60 73.90
    Physical reads: 4,553.60 458.09
    Physical writes: 22.31 2.24
    User calls: 137.71 13.85
    Parses: 176.87 17.79
    Hard parses: 5.42 0.54
    Sorts: 33.91 3.41
    Logons: 1.93 0.19
    Executes: 395.18 39.75
    Transactions: 9.94
    % Blocks changed per Read: 5.43 Recursive Call %: 89.13
    Rollback per transaction %: 72.82 Rows per Sort: 19.67
    Instance Efficiency Percentages (Target 100%)
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Buffer Nowait %: 99.50 Redo NoWait %: 100.00
    Buffer Hit %: 66.31 In-memory Sort %: 100.00
    Library Hit %: 98.48 Soft Parse %: 96.94
    Execute to Parse %: 55.24 Latch Hit %: 99.03
    Parse CPU to Parse Elapsd %: 82.12 % Non-Parse CPU: 95.73
    Shared Pool Statistics Begin End
    Memory Usage %: 94.76 95.87
    % SQL with executions>1: 49.23 50.37
    % Memory for SQL w/exec>1: 55.86 57.57
    Top 5 Timed Events
    ~~~~~~~~~~~~~~~~~~ % Total
    Event Waits Time (s) Ela Time
    db file scattered read 105,673 610 37.94
    db file sequential read 64,554 604 37.55
    SQL*Net message from dblink 822 115 7.15
    CPU time 114 7.09
    buffer busy waits 15,554 78 4.83
    Wait Events for DB: FCRLIVE Instance: fcrlive Snaps: 105 -106
    -> s - second
    -> cs - centisecond - 100th of a second
    -> ms - millisecond - 1000th of a second
    -> us - microsecond - 1000000th of a second
    -> ordered by wait time desc, waits desc (idle events last)
    Avg
    Total Wait wait Waits
    Event Waits Timeouts Time (s) (ms) /txn
    db file scattered read 105,673 0 610 6 45.2
    db file sequential read 64,554 0 604 9 27.6
    SQL*Net message from dblink 822 0 115 140 0.4
    buffer busy waits 15,554 0 78 5 6.7
    db file parallel write 310 0 44 143 0.1
    log file sync 1,070 3 39 37 0.5
    log file parallel write 1,052 1,052 2 2 0.5
    latch free 728 567 1 1 0.3
    control file parallel write 76 0 1 8 0.0
    direct path read (lob) 14 0 0 25 0.0
    SQL*Net more data to client 12,222 0 0 0 5.2
    db file parallel read 1 0 0 8 0.0
    SQL*Net break/reset to clien 44 0 0 0 0.0
    control file sequential read 112 0 0 0 0.0
    SQL*Net message to dblink 822 0 0 0 0.4
    SQL*Net more data from dblin 71 0 0 0 0.0
    undo segment extension 36 35 0 0 0.0
    SQL*Net message from client 25,539 0 54,417 2131 10.9
    wakeup time manager 8 8 240 30000 0.0
    SQL*Net more data from clien 1,602 0 0 0 0.7
    SQL*Net message to client 25,569 0 0 0 10.9
    Background Wait Events for DB: FCRLIVE Instance: fcrlive Snaps: 105 -106
    -> ordered by wait time desc, waits desc (idle events last)
    Avg
    Total Wait wait Waits
    Event Waits Timeouts Time (s) (ms) /txn
    db file parallel write 310 0 44 143 0.1
    log file parallel write 1,048 1,048 2 2 0.4
    control file parallel write 75 0 1 8 0.0
    db file sequential read 38 0 0 2 0.0
    latch free 3 0 0 1 0.0
    control file sequential read 52 0 0 0 0.0
    rdbms ipc reply 3 0 0 0 0.0
    db file scattered read 1 0 0 0 0.0
    buffer busy waits 1 0 0 0 0.0
    rdbms ipc message 5,131 2,539 1,856 362 2.2
    smon timer 2 1 463 ###### 0.0
    pmon timer 86 86 226 2623 0.0
    Please help me on this.
    Thanks and Regards,
    Jatin

    Hi,
    Thanks for the response.
    Apologies for the late response.
    We made changes in parameter file,after which the db is not getting hang.
    but still its very slow.
    db_buffer_cache---3Gb changed to 6 Gb
    shared_pool_size---400MB changed to 600MB
    log_buffer--5MB changed to 218MB.
    Please find the statspack report below.
    STATSPACK report for
    DB Name DB Id Instance Inst Num Release Cluster Host
    FCRLIVE 822947670 fcrlive 1 9.2.0.4.0 NO zanacoret
    Snap Id Snap Time Sessions Curs/Sess Comment
    Begin Snap: 117 07-Jun-11 20:57:36 26 1.8
    End Snap: 118 08-Jun-11 03:14:10 33 29.6
    Elapsed: 376.57 (mins)
    Cache Sizes (end)
    ~~~~~~~~~~~~~~~~~
    Buffer Cache: 3,072M Std Block Size: 8K
    Shared Pool Size: 400M Log Buffer: 5,120K
    Load Profile
    ~~~~~~~~~~~~ Per Second Per Transaction
    Redo size: 560,384.15 157,618.29
    Logical reads: 26,085.91 7,337.14
    Block changes: 2,926.34 823.09
    Physical reads: 1,312.97 369.30
    Physical writes: 100.81 28.35
    User calls: 14.18 3.99
    Parses: 9.16 2.58
    Hard parses: 0.33 0.09
    Sorts: 53.39 15.02
    Logons: 0.06 0.02
    Executes: 801.72 225.50
    Transactions: 3.56
    % Blocks changed per Read: 11.22 Recursive Call %: 98.72
    Rollback per transaction %: 2.77 Rows per Sort: 18.85
    Instance Efficiency Percentages (Target 100%)
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Buffer Nowait %: 99.95 Redo NoWait %: 100.00
    Buffer Hit %: 94.99 In-memory Sort %: 100.00
    Library Hit %: 99.89 Soft Parse %: 96.43
    Execute to Parse %: 98.86 Latch Hit %: 99.29
    Parse CPU to Parse Elapsd %: 5.68 % Non-Parse CPU: 99.80
    Shared Pool Statistics Begin End
    Memory Usage %: 20.38 74.21
    % SQL with executions>1: 52.84 35.47
    % Memory for SQL w/exec>1: 38.38 37.80
    Top 5 Timed Events
    ~~~~~~~~~~~~~~~~~~ % Total
    Event Waits Time (s) Ela Time
    db file sequential read 6,369,437 38,718 44.15
    db file scattered read 1,848,969 12,195 13.91
    CPU time 9,859 11.24
    db file parallel write 27,841 6,544 7.46
    log file sync 17,603 6,286 7.17
    Wait Events for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> s - second
    -> cs - centisecond - 100th of a second
    -> ms - millisecond - 1000th of a second
    -> us - microsecond - 1000000th of a second
    -> ordered by wait time desc, waits desc (idle events last)
    Avg
    Total Wait wait Waits
    Event Waits Timeouts Time (s) (ms) /txn
    db file sequential read 6,369,437 0 38,718 6 79.3
    db file scattered read 1,848,969 0 12,195 7 23.0
    db file parallel write 27,841 0 6,544 235 0.3
    log file sync 17,603 4,321 6,286 357 0.2
    log buffer space 18,192 689 6,040 332 0.2
    buffer busy waits 319,377 13 1,992 6 4.0
    enqueue 1,094 422 1,339 1224 0.0
    SQL*Net break/reset to clien 412 0 1,144 2776 0.0
    db file parallel read 143,728 0 1,123 8 1.8
    SQL*Net message from dblink 1,698,780 0 1,043 1 21.1
    log file parallel write 81,639 81,332 364 4 1.0
    direct path write 7,869 0 339 43 0.1
    library cache pin 215 103 309 1438 0.0
    latch free 74,864 73,409 117 2 0.9
    log file switch completion 289 33 66 227 0.0
    library cache load lock 132 14 49 374 0.0
    control file parallel write 7,633 0 46 6 0.1
    local write wait 175 14 23 130 0.0
    SQL*Net more data to client 166,226 0 4 0 2.1
    direct path read 7,674 0 3 0 0.1
    sort segment request 1 1 1 1000 0.0
    log file single write 96 0 1 9 0.0
    SQL*Net message to dblink 1,698,780 0 0 0 21.1
    undo segment extension 1,172,153 1,172,094 0 0 14.6
    control file sequential read 3,474 0 0 0 0.0
    LGWR wait for redo copy 705 6 0 0 0.0
    L1 validation 2 2 0 10 0.0
    log file sequential read 96 0 0 0 0.0
    row cache lock 8 0 0 0 0.0
    SQL*Net more data to dblink 7 0 0 0 0.0
    SQL*Net more data from dblin 13 0 0 0 0.0
    buffer deadlock 281 275 0 0 0.0
    SQL*Net message from client 278,244 0 377,492 1357 3.5
    wakeup time manager 712 712 21,268 29870 0.0
    SQL*Net message to client 278,253 0 0 0 3.5
    SQL*Net more data from clien 10,186 0 0 0 0.1
    Background Wait Events for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> ordered by wait time desc, waits desc (idle events last)
    Avg
    Total Wait wait Waits
    Event Waits Timeouts Time (s) (ms) /txn
    db file parallel write 27,841 0 6,544 235 0.3
    log buffer space 7,410 91 1,407 190 0.1
    log file parallel write 81,639 81,332 364 4 1.0
    control file parallel write 7,633 0 46 6 0.1
    rdbms ipc reply 535 0 36 66 0.0
    direct path write 936 0 9 10 0.0
    db file scattered read 593 0 6 10 0.0
    db file sequential read 573 0 2 3 0.0
    buffer busy waits 88 0 1 12 0.0
    log file single write 96 0 1 9 0.0
    direct path read 936 0 1 1 0.0
    control file sequential read 3,416 0 0 0 0.0
    latch free 34 18 0 3 0.0
    LGWR wait for redo copy 705 6 0 0 0.0
    log file sequential read 96 0 0 0 0.0
    rdbms ipc message 4,131,462 220,177 141,132 34 51.4
    pmon timer 7,573 7,573 22,050 2912 0.1
    smon timer 197 61 21,406 ###### 0.0
    SQL ordered by Gets for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> End Buffer Gets Threshold: 10000
    -> Note that resources reported for PL/SQL includes the resources used by
    all SQL statements called within the PL/SQL code. As individual SQL
    statements are also reported, it is possible and valid for the summed
    total % to exceed 100
    CPU Elapsd
    Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
    136,430,565 7 19,490,080.7 23.1 496.31 1660.82 1267598321
    Module: EodControllerService.exe
    BEGIN :V1 :=ap_ffi_eod_gl_handoff (:V2 ,:V3 ,:V4 ,:V5 ,:V6 ,:V7
    ); END;
    129,875,732 60 2,164,595.5 22.0 421.03 584.27 1178926567
    Module: EodControllerService.exe
    INSERT INTO gl_tmp_consol_txns SELECT *
    FROM xf_stcap_gl_txns a WHERE cod_cc_brn
    = :b2 AND EXISTS ( S
    ELECT cod_gl_acct FROM gl_table
    WHERE cod_acct_no = a.cod_acct_no
    83,164,197 7 11,880,599.6 14.1 1437.82 19622.60 1310689453
    Module: EodControllerService.exe
    BEGIN :V1 :=ap_ch_txn_posting_1 (:V2 ,:V3 ); END;
    53,937,548 1 53,937,548.0 9.2 590.41 1662.42 1193408424
    Module: EodControllerService.exe
    BEGIN :V1 :=ap_eod_process_cotxn_logs (:V2 ,:V3 ,:V4 ,:V5 ,:V6
    ,:V7 ); END;
    48,257,221 1 48,257,221.0 8.2 478.16 466.95 518738743
    Module: EodControllerService.exe
    DELETE FROM xf_ol_st_cotxn_cutoff WHERE (cod_msg_typ
    , ref_sys_tr_aud_no, dat_t
    xn, acq_inst_id, fwd_inst_
    id ) IN ( SELECT resp.cod
    msgtyp, resp.ref_sys_tr_aud_no, re
    46,257,664 7 6,608,237.7 7.8 841.22 2214.64 879334765
    Module: EodControllerService.exe
    BEGIN :V1 :=ap_ln_action (:V2 ,:V3 ,:V4 ,:V5 ,:V6 ,:V7 ); END;
    44,754,751 3 14,918,250.3 7.6 622.38 2498.91 2167787315
    Module: EodControllerService.exe
    BEGIN :V1 :=ap_sc_housekeeping_2 (:V2 ,:V3 ,:V4 ,:V5 ,:V6 ,:V7
    ); END;
    35,500,506 616,696 57.6 6.0 728.72 780.55 1752188118
    Module: EodControllerService.exe
    SELECT NVL(SUM(bal_int_arrears), 0) + NVL(SUM(bal_int_arrears_su
    sp), 0) FROM ln_acct_int_balances A, ln_prod_int_attr B, ln_int_
    rules C WHERE C.cod_int_typ IN (0, 1, 4) AND B.cod_int_rule = C.
    cod_int_rule AND A.ctr_int_srl = B.ctr_srl_no AND A.cod_acct_no
    = :b2 AND B.cod_prod = :b1 AND B.flg_mnt_status = 'A' AND C.flg_
    32,697,572 105,726 309.3 5.5 581.16 596.32 3042519173
    Module: JDBC Thin Client
    SELECT rat_ccy_mid, rat_ccy_book, rat_ccy_
    SQL ordered by Gets for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> End Buffer Gets Threshold: 10000
    -> Note that resources reported for PL/SQL includes the resources used by
    all SQL statements called within the PL/SQL code. As individual SQL
    statements are also reported, it is possible and valid for the summed
    total % to exceed 100
    CPU Elapsd
    Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
    cb, rat_ccy_special_1, rat_ccy_special_2,
    rat_note_buy_sprd, rat_note_sell_sprd,
    rat_chq_buy_sprd, rat_chq_sell_sprd,
    rat_xfer_buy_sprd, rat_xfer_sell_sprd FROM b
    30,808,307 110,576 278.6 5.2 294.44 15391.36 1194686144
    Module: EodControllerService.exe
    SELECT COUNT(*) FROM ch_arrears_table WHERE cod_acct_no = :b5 AN
    D cod_arrear_type = :b4 AND dat_arrears_due = :b3 AND cod_
    sc = :b2 AND cod_sc_ccy = :b1
    30,544,881 6,585 4,638.6 5.2 490.34 613.37 932403169
    Module: PosService.exe
    SELECT count(*) FROM xf_ol_st_postxn WHERE NV
    L(rtrim(acq_inst_id), ' ') = NVL(rtrim(:b7), ' ')
    AND NVL(rtrim(fwd_inst_id), ' ') = NV
    L(rtrim(:b6), ' ') AND NVL(rtrim(ca_id_code), ' ') =
    NVL(rtrim(:b5), ' ') AND NVL(rtrim(ca_
    26,690,998 155,669 171.5 4.5 662.17 675.63 3222131678
    Module: EodControllerService.exe
    UPDATE xf_st_cap_input_txn SET flg_process = 'Y'
    WHERE cod_acct_no = :b13 AND cod_cc_brn = :b12
    AND cod_prod = :b11 AND dat_post = :b10
    AND ctr_batch_no = :b9 AND NVL(cod_userno, 0)
    = NVL(:b8, 0) AND NVL(ref_sys_tr_aud_no, 0) =
    18,789,157 3,134 5,995.3 3.2 308.37 1094.89 1546108753
    Module: PosService.exe
    BEGIN :V1 :=ap_ol_pos_xfer_dr (:V2 ,:V3 ,:V4 ,:V5 ,:V6 ,:V7 ,:V
    8 ,:V9 ,:V10 ,:V11 ,:V12 ,:V13 ,:V14 ,:V15 ,:V16 ,:V17 ,:V18 ,:V
    19 ,:V20 ,:V21 ,:V22 ,:V23 ,:V24 ,:V25 ,:V26 ,:V27 ,:V28 ,:V29 ,
    :V30 ,:V31 ,:V32 ,:V33 ,:V34 ,:V35 ,:V36 ,:V37 ,:V38 ,:V39 ,:V40
    ,:V41 ,:V42 ,:V43 ,:V44 ,:V45 ,:V46 ,:V47 ,:V48 ,:V49 ,:V50 ,:V
    18,077,663 3,202 5,645.7 3.1 291.42 602.13 3022529234
    Module: PosService.exe
    BEGIN :V1 :=ap_ol_pos_xfer_mrch_cr (:V2 ,:V3 ,:V4 ,:V5 ,:V6 ,:V
    7 ,:V8 ,:V9 ,:V10 ,:V11 ,:V12 ,:V13 ,:V14 ,:V15 ,:V16 ,:V17 ,:V1
    8 ,:V19 ,:V20 ,:V21 ,:V22 ,:V23 ,:V24 ,:V25 ,:V26 ,:V27 ,:V28 ,:
    V29 ,:V30 ,:V31 ,:V32 ,:V33 ,:V34 ,:V35 ,:V36 ,:V37 ,:V38 ,:V39
    ,:V40 ,:V41 ,:V42 ,:V43 ,:V44 ,:V45 ,:V46 ,:V47 ,:V48 ,:V49 ,:V5
    15,191,513 2 7,595,756.5 2.6 392.91 418.92 718440598
    Module: SQLNav4.exe
    select cod_acct_no, nam_cust_shrt, round(bal_book,2) balance fro
    m flexlive.ln_acct_mast where bal_book >= 1.00 and flg_mnt_statu
    s = 'A' order by cod_acct_no
    14,314,012 1 14,314,012.0 2.4 283.17 323.20 2997552506
    SQL ordered by Gets for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> End Buffer Gets Threshold: 10000
    -> Note that resources reported for PL/SQL includes the resources used by
    all SQL statements called within the PL/SQL code. As individual SQL
    statements are also reported, it is possible and valid for the summed
    total % to exceed 100
    CPU Elapsd
    Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
    Module: REPORT~1.EXE
    SELECT A.cod_cc_brn, A.nam_branch, A.cod_ccy, A.nam_ccy_short, A
    .cod_prod, A.nam_product, --A.cod_acct_no, A.cod_acct_no||'-'||c
    .TXT_CRR_DESC cod_acct_no, A.nam_cust_shrt, A.amt_face_value amt
    sanctioned, A.amtdisbursed amt_disbursed, A.amt_net_disbursed
    amt_net_disbursed, A.amt_princ_balance amt_princ_outst, A.amt_rp
    13,908,167 1,287,314 10.8 2.4 105.21 459.84 3522162665
    Module: EodControllerService.exe
    UPDATE sc_txns_summary SET ctr_txn_curr = 0, amt_txn_curr = 0,
    amt_sc_curr = 0, amt_sc_diffl_curr = 0, amt_sc_wvr_curr = 0,
    amt_sc_hold_curr = 0, dat_start = :b5, dat_end = :b4 WHERE
    cod_acct_no = :b3 AND cod_sc = :b2 AND cod_ccy = :b1
    13,402,123 1 13,402,123.0 2.3 444.18 457.86 875238559
    Module: REPORT~1.EXE
    BEGIN :RV1 := AP_CH_R103(:C1); END;
    SQL ordered by Reads for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> End Disk Reads Threshold: 1000
    CPU Elapsd
    Physical Reads Executions Reads per Exec %Total Time (s) Time (s) Hash Value
    9,610,221 1 9,610,221.0 32.4 538.39 3259.15 3996534557
    Module: REPORT~1.EXE
    BEGIN :RV1 := AP_CH_R144(:C1); END;
    6,404,828 1 6,404,828.0 21.6 341.88 1774.46 4258600690
    Module: REPORT~1.EXE
    INSERT INTO rpt_ch_r144 ( cod_cc_brn , cod_prod
    , nam_product , cod_acct_no_swpin , cod_acct_no_be
    nef , txt_txn_desc , dat_txn , cod_userno
    , ref_sys_tr_aud_no , cod_txn_mnemonic , nam_branch
    , amt_txn_tcy , cod_txn_ccy , nam_ccy_short , SESSI
    3,507,577 1 3,507,577.0 11.8 243.07 1869.07 2966562005
    Module: EodControllerService.exe
    BEGIN :V1 :=ap_ln_btp (:V2 ,:V3 ,:V4 ,:V5 ,:V6 ,:V7 ); END;
    3,202,492 1 3,202,492.0 10.8 196.14 1478.50 1167537011
    Module: REPORT~1.EXE
    INSERT INTO TEMP_tmp_ch_r144 ( COD_ACCT_NO , COD_CC_B
    RN , COD_PROD , TXT_TXN_DESC
    , DAT_TXN , COD_USERNO , REF_SYS_TR_
    AUD_NO , COD_TXN_MNEMONIC , AMT_TXN_TCY ,
    COD_TXN_CCY , NAM_CCY_SHORT , SESSION_ID ) SELECT cod_acct_no
    3,017,581 3 1,005,860.3 10.2 398.28 6680.23 2812233565
    Module: python@svrstatement (TNS V1-V3)
    begin FLEXLIVE.ZN_DAILYSTMNT(:arg_1); end;
    3,004,269 3 1,001,423.0 10.1 394.83 6647.07 3411879556
    Module: python@svrstatement (TNS V1-V3)
    SELECT NVL(sum(amt_txn*instr('C',cod_drcr))-sum(amt_txn*instr('D
    ',cod_drcr)),0.00) from ch_nobook where cod_acct_no = :b2 and
    dat_post < :b1
    Latch Name Where Misses Sleeps Sleeps
    cache buffers chains kcbgtcr: kslbegin excl 0 44,053 43,307
    cache buffers chains kcbrls: kslbegin 0 26,416 28,168
    cache buffers chains kcbzsc 0 1,189 1
    cache buffers chains kcbzwb 0 942 704
    cache buffers chains kcbchg: kslbegin: bufs not 0 637 418
    cache buffers chains kcbgcur: kslbegin 0 527 876
    cache buffers chains kcbget: exchange rls 0 185 99
    cache buffers chains kcbget: exchange 0 123 133
    cache buffers chains kcbzib: multi-block read: 0 73 0
    cache buffers chains kcbget: pin buffer 0 45 136
    cache buffers chains kcbzgb: scan from tail. no 0 45 0
    cache buffers chains kcbnew 0 28 2
    cache buffers chains kcbbxsv 0 27 7
    cache buffers chains kcbgtcr: fast path 0 24 173
    cache buffers chains kcbgtcr 0 15 0
    cache buffers chains kcbzib: finish free bufs 0 12 63
    cache buffers chains kcbgtcr: kslbegin shared 0 9 5
    cache buffers chains kcbchg: kslbegin: call CR 0 9 274
    cache buffers chains kcbnlc 0 3 12
    cache buffers lru chain kcbbiop: lru scan 1,028 80 0
    cache buffers lru chain kcbzgb: multiple sets nowa 33,462 20 4
    cache buffers lru chain kcbzgb: posted for free bu 684 10 121
    cache buffers lru chain kcbbxsv: move to being wri 86 9 3
    cache buffers lru chain kcbgtcr:CR Scan:KCBRSKIP 191 7 0
    cache buffers lru chain kcbbwlru 59 2 0
    cache buffers lru chain kcbzar: KSLNBEGIN 11,844 2 0
    checkpoint queue latch kcbbxsv: move to being wri 0 9 0
    checkpoint queue latch kcbbwthc: thread checkpoin 0 7 0
    checkpoint queue latch kcbswcu: Switch buffers 0 2 17
    enqueue hash chains ksqcnl 0 6 5
    enqueue hash chains ksqrcl 0 2 1
    enqueues ksqdel 0 3 5
    enqueues ksqgel: create enqueue 0 2 0
    library cache kglpnc: child 0 13 18
    library cache kgllkdl: child: cleanup 0 8 0
    library cache kglupc: child 0 5 9
    library cache kglpndl: child: before pro 0 5 2
    library cache kglhdgn: child: 0 2 2
    library cache kglpnp: child 0 1 0
    library cache pin kglupc 0 3 5
    library cache pin kglpnc: child 0 3 1
    multiblock read objects kcbzib: normal mbr free 0 2 1
    redo allocation kcrfwr 0 73 73
    redo allocation kcrfwi: before write 0 1 1
    row cache enqueue latch kqreqd 0 1 0
    row cache objects kqrpfl: not dirty 0 15 3
    row cache objects kqrpre: find obj 0 6 18
    shared pool kghupr1 0 3 4
    shared pool kghalp 0 1 0
    simulator lru latch kcbs_simulate: simulate se 0 6 6
    simulator lru latch kcbs_lookup_setid 0 3 3
    undo global data ktudba: KSLBEGIN 0 3 3
    Latch Miss Sources for DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> only latches with sleeps are shown
    -> ordered by name, sleeps desc
    NoWait Waiter
    Latch Name Where Misses Sleeps Sleeps
    Parent Latch Statistics DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> only latches with sleeps are shown
    -> ordered by name
    Get Spin &
    Latch Name Requests Misses Sleeps Sleeps 1->4
    enqueues 1,911,942 22,454 5 22449/5/0/0/
    0
    multiblock read objects 4,388,310 1,031 2 1029/2/0/0/0
    row cache enqueue latch 13,604,407 5,954 1 5953/1/0/0/0
    Child Latch Statistics DB: FCRLIVE Instance: fcrlive Snaps: 117 -118
    -> only latches with sleeps/gets > 1/100000 are shown
    -> ordered by name, gets desc
    Child Get Spin &
    Latch Name Num Requests Misses Sleeps Sleeps 1->4
    cache buffers chains 3239 21,505,400 1,236,249 7,795 0/0/0/0/0
    cache buffers chains 3237 19,299,145 993,997 8,120 0/0/0/0/0
    cache buffers chains 3240 17,488,734 801,663 5,679 0/0/0/0/0
    cache buffers chains 3236 16,609,145 741,070 4,516 0/0/0/0/0
    cache buffers chains 3242 16,161,488 677,717 3,572 0/0/0/0/0
    cache buffers chains 3789 15,643,256 238,442 4,976 0/0/0/0/0
    cache buffers chains 3241 15,352,438 615,755 3,499 0/0/0/0/0
    cache buffers chains 2945 14,634,929 545,294 3,155 0/0/0/0/0
    cache buffers chains 510 13,117,914 455,313 1,994 0/0/0/0/0
    cache buffers chains 2947 12,685,566 419,997 1,589 0/0/0/0/0
    cache buffers chains 3238 12,591,861 408,182 1,501 0/0/0/0/0
    cache buffers chains 505 10,012,850 242,906 1,055 0/0/0/0/0
    cache buffers chains 511 9,979,520 244,777 1,078 0/0/0/0/0
    cache buffers chains 2948 9,094,481 199,262 822 0/0/0/0/0
    cache buffers chains 2185 9,045,926 209,522 924 0/0/0/0/0
    cache buffers chains 2944 8,677,071 191,854 832 0/0/0/0/0
    cache buffers chains 509 8,649,454 184,191 757 0/0/0/0/0
    cache buffers chains 508 6,868,267 112,615 414 0/0/0/0/0
    cache buffers chains 504 6,431,407 101,195 356 0/0/0/0/0
    cache buffers chains 2946 6,006,960 96,807 273 0/0/0/0/0
    cache buffers chains 2179 5,924,037 93,867 490 0/0/0/0/0
    cache buffers chains 2180 5,057,947 66,453 344 0/0/0/0/0
    cache buffers chains 507 4,638,543 57,389 172 0/0/0/0/0
    cache buffers chains 2181 3,465,838 16,960 100 0/0/0/0/0
    cache buffers chains 2186 3,255,441 29,094 142 0/0/0/0/0
    cache buffers chains 3398 3,124,434 33,454 213 0/0/0/0/0
    cache buffers chains 1593 2,908,993 558 117 0/0/0/0/0
    cache buffers chains 3504 2,673,360 25,420 215 0/0/0/0/0
    cache buffers chains 1177 2,424,271 298 56 0/0/0/0/0
    cache buffers chains 506 2,421,918 14,566 81 0/0/0/0/0
    cache buffers chains 1753 1,600,842 197 20 0/0/0/0/0
    cache buffers chains 2182 1,556,688 8,232 28 0/0/0/0/0
    cache buffers chains 1529 1,513,006 392 40 0/0/0/0/0
    cache buffers chains 2183 1,488,352 7,325 61 0/0/0/0/0
    cache buffers chains 2184 1,470,530 7,835 38 0/0/0/0/0
    cache buffers chains 3590 946,240 276 29 0/0/0/0/0
    cache buffers chains 3606 911,872 292 11 0/0/0/0/0
    Can we find the top 10 sql statement in AWR report.
    Please suggest.
    Thanks and Regards,
    Jatin

  • My MacBook Pro suddenly became very slow, cursor responding slowely

    My MacBook Pro suddenly became very slow, cursor responding slowely

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Very slow network throughput since 2-3 days ago

    I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
    I see (from what I can tell) no relevant package updates during that period.
    Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
    I've been running this setup for many years now, without such issues.
    But now, it's as if throughput is capped around 100Mbps.
    Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
    ifconfig does not say anything.
    PS: netstat -i does not report any errors over the connection.
    Last edited by wantilles (2011-04-12 15:25:52)

    experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
    Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
    edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
    Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
    More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
    Any insights?
    edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
    How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
    My rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="de"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
    #MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
    #MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="davelab"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    # vboxnetflt
    eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !wlan0 !lo)
    #WIRELESS_INTERFACE="wlan0"
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
    dmesg output:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
    Command line: root=/dev/sda3 ro resume=/dev/sda3 5
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
    BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
    BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
    BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
    NX (Execute Disable) protection: active
    DMI present.
    DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x160000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-DBFFF uncachable
    DC000-EFFFF write-through
    F0000-FFFFF write-back
    MTRR variable ranges enabled:
    0 base 0A0000000 mask FE0000000 uncachable
    1 base 0C0000000 mask FC0000000 uncachable
    2 base 000000000 mask F00000000 write-back
    3 base 100000000 mask FC0000000 write-back
    4 base 140000000 mask FE0000000 write-back
    5 base 09FF00000 mask FFFF00000 uncachable
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
    found SMP MP-table at [ffff8800000f7b50] f7b50
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-000000008fec0000
    0000000000 - 008fe00000 page 2M
    008fe00000 - 008fec0000 page 4k
    kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
    init_memory_mapping: 0000000100000000-0000000160000000
    0100000000 - 0160000000 page 2M
    kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
    RAMDISK: 37e56000 - 37ff0000
    ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
    ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
    ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
    ACPI: FACS 000000008fee4fc0 00040
    ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
    ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
    ACPI: Local APIC address 0xfee00000
    No NUMA configuration found
    Faking a node at 0000000000000000-0000000160000000
    Initmem setup node 0 0000000000000000-0000000160000000
    NODE_DATA [000000015fffb000 - 000000015fffffff]
    [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00160000
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0008fec0
    0: 0x00100000 -> 0x00160000
    On node 0 totalpages: 982605
    DMA zone: 56 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3919 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 571128 pages, LIFO batch:31
    Normal zone: 5376 pages used for memmap
    Normal zone: 387840 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10dea301 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
    PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
    PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
    PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
    PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
    Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
    pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
    Policy zone: Normal
    Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Preemptable hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 39321600 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2400.376 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    AppArmor: AppArmor disabled by boot time parameter
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    ACPI: Core revision 20110112
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1 Ok.
    CPU1: Thermal monitoring handled by SMI
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (9604.67 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    HEST: Table not found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
    pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
    pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
    pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
    pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
    pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
    pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
    pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
    pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
    pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
    pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
    pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
    pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
    pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
    pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
    pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
    pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
    pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
    pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
    pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
    pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
    pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
    pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
    pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
    pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
    pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
    pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
    pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
    pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
    pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
    pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:18.0: PME# disabled
    pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
    pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
    pci 0000:01:07.0: supports D1 D2
    pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.0: PME# disabled
    pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
    pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
    pci 0000:01:07.1: supports D1 D2
    pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.1: PME# disabled
    pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
    pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
    pci 0000:01:07.2: supports D1 D2
    pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.2: PME# disabled
    pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
    pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
    pci 0000:01:07.3: supports D1 D2
    pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.3: PME# disabled
    pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
    pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
    pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
    pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
    pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
    pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
    pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
    pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
    pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
    pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
    pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
    pci 0000:06:00.0: supports D1
    pci 0000:06:00.0: PME# supported from D0 D1 D3hot
    pci 0000:06:00.0: PME# disabled
    pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    pci0000:00: Requesting ACPI _OSC control (0x1d)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
    ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
    vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000008fec0000 - 000000008fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
    hpet0: 4 comparators, 64-bit 25.000000 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: [mem 0xffc00000-0xffffffff]
    pnp 00:00: [mem 0xfec00000-0xfec00fff]
    pnp 00:00: [mem 0xfee00000-0xfeefffff]
    pnp 00:00: [mem 0xfed00000-0xfed00fff]
    system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
    system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
    system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
    system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp 00:01: [bus 00-ff]
    pnp 00:01: [io 0x0cf8-0x0cff]
    pnp 00:01: [io 0x0000-0x0cf7 window]
    pnp 00:01: [io 0x0d00-0xffff window]
    pnp 00:01: [mem 0x000a0000-0x000bffff window]
    pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    pnp 00:01: [mem 0x000cc000-0x000cffff window]
    pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    pnp 00:01: [mem 0x000dc000-0x000dffff window]
    pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    pnp 00:01: [mem 0x000ec000-0x000effff window]
    pnp 00:01: [mem 0x000f0000-0x000fffff window]
    pnp 00:01: [mem 0xa0000000-0xfebfffff window]
    pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:02: [irq 0 disabled]
    pnp 00:02: [irq 8]
    pnp 00:02: [mem 0xfed00000-0xfed003ff]
    pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:03: [mem 0xf0600000-0xf0607fff]
    pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
    system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:04: [io 0x1000-0x107f]
    pnp 00:04: [io 0x1080-0x10ff]
    pnp 00:04: [io 0x1400-0x147f]
    pnp 00:04: [io 0x1480-0x14ff]
    pnp 00:04: [io 0x1800-0x187f]
    pnp 00:04: [io 0x1880-0x18ff]
    system 00:04: [io 0x1000-0x107f] has been reserved
    system 00:04: [io 0x1080-0x10ff] has been reserved
    system 00:04: [io 0x1400-0x147f] has been reserved
    system 00:04: [io 0x1480-0x14ff] has been reserved
    system 00:04: [io 0x1800-0x187f] has been reserved
    system 00:04: [io 0x1880-0x18ff] has been reserved
    system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:05: [io 0x0060]
    pnp 00:05: [io 0x0064]
    pnp 00:05: [irq 1]
    pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:06: [irq 12]
    pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    Switched to NOHz mode on CPU #0
    Switched to NOHz mode on CPU #1
    pnp 00:07: [io 0x0010-0x001f]
    pnp 00:07: [io 0x0022-0x003f]
    pnp 00:07: [io 0x0044-0x005f]
    pnp 00:07: [io 0x0072-0x0073]
    pnp 00:07: [io 0x0074-0x007f]
    pnp 00:07: [io 0x0091-0x0093]
    pnp 00:07: [io 0x0097-0x009f]
    pnp 00:07: [io 0x00a2-0x00bf]
    pnp 00:07: [io 0x00e0-0x00ef]
    pnp 00:07: [io 0x04d0-0x04d1]
    pnp 00:07: [io 0x0080]
    pnp 00:07: [io 0x0910-0x0911]
    pnp 00:07: [io 0x0295-0x0296]
    system 00:07: [io 0x04d0-0x04d1] has been reserved
    system 00:07: [io 0x0910-0x0911] has been reserved
    system 00:07: [io 0x0295-0x0296] has been reserved
    system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:08: [io 0x0000-0x0008]
    pnp 00:08: [io 0x000a-0x000f]
    pnp 00:08: [io 0x0081-0x0083]
    pnp 00:08: [io 0x0087]
    pnp 00:08: [io 0x0089-0x008b]
    pnp 00:08: [io 0x008f]
    pnp 00:08: [io 0x00c0-0x00d1]
    pnp 00:08: [io 0x00d4-0x00df]
    pnp 00:08: [dma 4]
    pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:09: [io 0x0061]
    pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:0a: [io 0x0070-0x0071]
    pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:0b: [io 0x00f0-0x00f1]
    pnp 00:0b: [irq 13]
    pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:0c: [io 0x0300-0x0307]
    pnp 00:0c: [irq 10]
    pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:00:09.0: PCI bridge to [bus 01-01]
    pci 0000:00:09.0: bridge window [io disabled]
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem pref disabled]
    pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io disabled]
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem pref disabled]
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io disabled]
    pci 0000:00:17.0: bridge window [mem disabled]
    pci 0000:00:17.0: bridge window [mem pref disabled]
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io disabled]
    pci 0000:00:18.0: bridge window [mem disabled]
    pci 0000:00:18.0: bridge window [mem pref disabled]
    pci 0000:00:09.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
    pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:10.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
    pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
    pci 0000:00:15.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
    pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:16.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
    pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:17.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
    pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:18.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
    pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
    pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
    pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
    pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:03:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1640k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
    software IO TLB at phys 0x8bc00000 - 0x8fc00000
    Simple Boot Flag at 0x36 set to 0x1
    audit: initializing netlink socket (disabled)
    type=2000 audit(1302716230.603:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7422
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Linux agpgart interface v0.103
    i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mousedev: PS/2 mouse device common for all mice
    rtc_cmos 00:0a: RTC can wake from S4
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Checking hibernation image partition /dev/sda3
    PM: Hibernation image not present or could not be loaded.
    registered taskstats version 1
    rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 556k freed
    udev[38]: starting version 166
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:0b.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
    ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
    ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
    ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
    ahci 0000:00:0b.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
    ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
    ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
    ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
    ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
    ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
    ata2.00: configured for UDMA/133
    ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    Refined TSC clocksource calibration: 2399.988 MHz.
    Switching to clocksource tsc
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    udev[632]: starting version 166
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    forcedeth 0000:00:0a.0: setting latency timer to 64
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    ath9k 0000:06:00.0: setting latency timer to 64
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
    forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
    i2c i2c-0: nForce2 SMBus adapter at 0x3040
    i2c i2c-1: nForce2 SMBus adapter at 0x2000
    ath: EEPROM regdomain: 0x60
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x60
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
    ACPI: Sleep Button [SLPB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:08.0: setting latency timer to 64
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    wmi: Mapper loaded
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: EC: GPE storm detected, transactions will use polling mode
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    ACPI: Battery Slot [BAT0] (battery present)
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    thermal LNXTHERM:00: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (60 C)
    ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    ACPI: AC Adapter [ADP0] (on-line)
    usb 1-2: new high speed USB device using ehci_hcd and address 3
    input: Dell WMI hotkeys as /devices/virtual/input/input7
    acpi device:0c: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
    acpi device:14: registered as cooling_device3
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
    ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    firewire_core: created device fw0: GUID 424fc00010f09890, S400
    firewire_core: phy config: card 0, new root=ffc1, gap_count=5
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    cfg80211: World regulatory domain updated:
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    usb 1-1.1: new low speed USB device using ehci_hcd and address 5
    usb 1-1.2: new full speed USB device using ehci_hcd and address 6
    usb 1-1.4: new high speed USB device using ehci_hcd and address 7
    cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
    cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
    usbcore: registered new interface driver cdc_wdm
    Initializing USB Mass Storage driver...
    cdc_acm 2-1:1.1: ttyACM0: USB ACM device
    cdc_acm 2-1:1.3: ttyACM1: USB ACM device
    scsi6 : usb-storage 1-2:1.0
    cdc_acm 2-1:1.9: ttyACM2: USB ACM device
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver cdc_acm
    cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    scsi7 : usb-storage 1-1.4:1.0
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
    cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
    usbcore: registered new interface driver cdc_ether
    input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v1.0.0)
    usbcore: registered new interface driver uas
    usbcore: registered new interface driver zaurus
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
    generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
    generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
    generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
    logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
    logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
    logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
    scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
    sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
    sd 7:0:0:0: Attached scsi generic sg3 type 0
    sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
    sd 7:0:0:0: [sdc] Write Protect is off
    sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
    sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdc: unknown partition table
    sd 7:0:0:0: [sdc] Attached SCSI disk
    sdb: unknown partition table
    sd 6:0:0:0: [sdb] Attached SCSI disk
    hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
    hda-intel: Codec #1 probe error; disabling it...
    firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
    input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
    fuse init (API version 7.16)
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
    nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:02:00.0: enabling device (0004 -> 0007)
    nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:02:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
    nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:03:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
    loop: module loaded
    vboxdrv: Found 2 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
    vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver wacom
    wacom: v1.52:USB Wacom tablet driver
    usb 3-4: new full speed USB device using ohci_hcd and address 2
    hub 3-4:1.0: USB hub found
    hub 3-4:1.0: 3 ports detected
    EXT4-fs (sda3): re-mounted. Opts: (null)
    EXT4-fs (sda3): re-mounted. Opts: (null)
    usb 3-4.1: new full speed USB device using ohci_hcd and address 3
    input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
    generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
    usb 3-4.2: new full speed USB device using ohci_hcd and address 4
    input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
    generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
    Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
    usb 3-4.3: new full speed USB device using ohci_hcd and address 5
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    CE: hpet increased min_delta_ns to 11520 nsec
    CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
    forcedeth 0000:00:0a.0: eth0: no link during initialization
    ohci_hcd 0000:00:06.0: PCI INT A disabled
    ohci_hcd 0000:00:06.0: PME# enabled
    ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
    ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
    ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
    ohci_hcd 0000:00:06.0: PME# disabled
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    NET: Registered protocol family 10
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Bluetooth: L2CAP ver 2.15
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    i2c /dev entries driver
    wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: authenticated
    wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    cfg80211: Calling CRDA for country: GB
    cfg80211: Regulatory domain changed to country: GB
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    Intel AES-NI instructions are not detected.
    padlock_aes: VIA PadLock not detected.
    wlan0: no IPv6 routers present
    EXT4-fs (sda3): re-mounted. Opts: commit=0
    warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
    ifconfig wlan0:
    wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
    inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
    TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
    I wonder why this is happening
    Last edited by king.flasher.dave (2011-04-13 16:15:59)

  • Database is very slow

    Hi Guys,
    I am geting trouble. My database is very slow. I couldn't log in when I launch enterprise manager. I use sqlplus to login on as sys, and it was ok, but it was very slow when I select from v$lock. It is fast when I select from v$session. How can I fix? How can know what database is doing? Thanks.

    It is been fixed by our consultant. The reason is memery shortage. The consultant company didn't tell us much more. Thank you guys. Now I checked my system, in v$session_wait view, there are 3 buffer busy waits events there, and in P2Text column, there is a value "Block#". I checked the view of V$waitstat, the result like
    data block 4234 1259059
    undo header 68169 6811160
    is there problem?
    in v$system_envents like
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED AVERAGE_WAIT TIME_WAITED_MICRO
    buffer busy waits 72994 72950 7953083 109 7,9531E+10
    when I select from v$lock, it took long time, finally I cancelled. I coun't use enterprise manager to expand instance tree to see the sessio, very slow and like hang. What's problem? How do I fix it?

  • Netflix /youtube is very slow and jerky

    My macbook pro is a 2.43 GHz intel Core duo with 4GB of memory.  I updated to Maverics and Netfix and youtube became very slow and jerky.
    Even moving the mouse causes probles with playback.
    This does not happen my wifes mac book pro, or my small windows laptop and it did not happen untill I updated to maverics.
    Any suggestions?
    Thanks

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

    My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in  mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
    EtreCheck version: 1.9.15 (52)
    Report generated 8 September 2014 09:09:26 BST
    Hardware Information: ?
      iMac (20-inch, Early 2008) (Verified)
      iMac - model: iMac8,1
      1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
      2 GB RAM
    Video Information: ?
      ATI Radeon HD 2600 Pro - VRAM: 256 MB
      iMac 1680 x 1050
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
    Disk Information: ?
      Hitachi HDP725032GLA380 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Bose Corporation Bose USB Audio
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ?
      Mac App Store and identified developers
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
    Launch Agents: ?
      [running] com.trusteer.rapport.rapportd.plist Support
    User Login Items: ?
      iTunesHelper
    Internet Plug-ins: ?
      Google Earth Web Plug-in: Version: 5.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      eMusicRemote: Version: (null) Support
      eMusic: Version: Unknown
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Flip4Mac WMV  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          2% iTunes
          2% WindowServer
          0% coreaudiod
          0% fontd
          0% rapportd
    Top Processes by Memory: ?
      178 MB Finder
      133 MB com.apple.WebKit.WebContent
      109 MB iTunes
      92 MB Safari
      63 MB com.apple.quicklook.satellite
    Virtual Memory Information: ?
      24 MB Free RAM
      821 MB Active RAM
      807 MB Inactive RAM
      291 MB Wired RAM
      338 MB Page-ins
      680 KB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Mac Mini boots very slow with Mavericks (after security update)

    Hi,
    my Mac Mini boots very slow after I've installed Maveriks. I did two clean installs by now, seemed to work OK after the second one but after the latest safety update (2014-002) the boot time is up to 5+ minutes. Starting Safari or other software takes addtional time. See below for system specs, Etrecheck and log. Any ideas what could cause this? According to the update history I did install the security update 2014-002 twice on the same day although I cannot remember doing such a thing.
    Thanks Joerg
    Hardware Information:
              Mac mini (Late 2009)
              Mac mini - model: Macmini3,1
              1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce 9400 - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 0:42:32
    Disk Information:
              Hitachi HTS545032B9SA02 disk0 : (320,07 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) / [Startup]: 319,21 GB (225 GB free)
              OPTIARC DVD RW AD-5670S 
    USB Information:
              Mitsumi Electric Hub in Apple Extended USB Keyboard
                        Mitsumi Electric Apple Optical USB Mouse
                        Mitsumi Electric Apple Extended USB Keyboard
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
    Thunderbolt Information:
    Gatekeeper:
              Mac App Store and identified developers
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Default Browser: Version: 537 - SDK 10.9
    Safari Extensions:
              AdBlock: Version: 2.6.28
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   1%          fontd
                   0%          Console
                   0%          coreservicesd
                   0%          imagent
    Top Processes by Memory:
              213 MB          Safari
              90 MB          com.apple.IconServicesAgent
              90 MB          com.apple.WebKit.WebContent
              82 MB          mds_stores
              49 MB          Console
    Virtual Memory Information:
              5.33 GB          Free RAM
              1.60 GB          Active RAM
              211 MB          Inactive RAM
              627 MB          Wired RAM
              230 MB          Page-ins
              0 B          Page-outs
    28.04.14 09:48:09,000 bootlog[0]: BOOT_TIME 1398671289 0
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 kernel[0]: Longterm timer threshold: 1000 ms
    28.04.14 09:55:31,000 kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    28.04.14 09:55:31,000 kernel[0]: vm_page_bootstrap: 1867682 free pages and 147550 wired pages
    28.04.14 09:55:31,000 kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    28.04.14 09:55:31,000 kernel[0]: zone leak detection enabled
    28.04.14 09:55:31,000 kernel[0]: "vm_compressor_mode" is 4
    28.04.14 09:55:31,000 kernel[0]: standard timeslicing quantum is 10000 us
    28.04.14 09:55:31,000 kernel[0]: standard background quantum is 2500 us
    28.04.14 09:55:31,000 kernel[0]: mig_table_max_displ = 74
    28.04.14 09:55:31,000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    28.04.14 09:55:31,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for Sandbox
    28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for Quarantine
    28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    28.04.14 09:55:31,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    28.04.14 09:55:31,000 kernel[0]: The Regents of the University of California. All rights reserved.
    28.04.14 09:55:31,000 kernel[0]: MAC Framework successfully initialized
    28.04.14 09:55:31,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    28.04.14 09:55:31,000 kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
    28.04.14 09:55:31,000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    28.04.14 09:55:31,000 kernel[0]: ACPI: sleep states S3 S4 S5
    28.04.14 09:55:31,000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    28.04.14 09:55:31,000 kernel[0]: [ PCI configuration begin ]
    28.04.14 09:55:31,000 kernel[0]: console relocated to 0xf80010000
    28.04.14 09:55:31,000 kernel[0]: [ PCI configuration end, bridges 5, devices 18 ]
    28.04.14 09:55:31,000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    28.04.14 09:55:31,000 kernel[0]: NVEthernet::start - Built Sep 19 2013 22:20:06
    28.04.14 09:55:31,000 kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size
    28.04.14 09:55:31,000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    28.04.14 09:55:31,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    28.04.14 09:55:31,000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 34159efffe270ccc; max speed s800.
    28.04.14 09:55:31,000 kernel[0]: rooting via boot-uuid from /chosen: 289A3125-09B8-376B-ACE3-38D61384202E
    28.04.14 09:55:31,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    28.04.14 09:55:31,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    28.04.14 09:55:31,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS545032B9SA02 Media/IOGUIDPartitionScheme/Customer@2
    28.04.14 09:55:31,000 kernel[0]: BSD root: disk0s2, major 1, minor 2
    28.04.14 09:55:31,000 kernel[0]: BTCOEXIST off
    28.04.14 09:55:31,000 kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    28.04.14 09:55:31,000 kernel[0]: 5.10.131.36
    28.04.14 09:55:31,000 kernel[0]: hfs: mounted Macintosh HD on device root_device
    28.04.14 09:48:39,817 com.apple.launchd[1]: *** launchd[1] has started up. ***
    28.04.14 09:48:39,817 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    28.04.14 09:55:30,438 hidd[43]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    28.04.14 09:55:30,439 hidd[43]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    28.04.14 09:55:30,602 com.apple.SecurityServer[25]: Session 100000 created
    28.04.14 09:55:31,684 fseventsd[44]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (3 442 34362)
    28.04.14 09:55:31,738 fseventsd[44]: log dir: /.fseventsd getting new uuid: 4D96DE92-DF6A-4074-A734-C058ACC67177
    28.04.14 09:55:33,000 kernel[0]: VM Swap Subsystem is ON
    28.04.14 09:55:33,000 kernel[0]: Waiting for DSMOS...
    28.04.14 09:55:36,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    28.04.14 09:55:36,000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    28.04.14 09:55:36,000 kernel[0]: NVDAStartup: Official
    28.04.14 09:55:36,000 kernel[0]: init
    28.04.14 09:55:36,000 kernel[0]: probe
    28.04.14 09:55:36,000 kernel[0]: start
    28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    28.04.14 09:55:36,000 kernel[0]: IOBluetoothUSBDFU::probe
    28.04.14 09:55:36,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8216 FirmwareVersion - 0x0207
    28.04.14 09:55:36,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xe000 ****
    28.04.14 09:55:36,000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xe000 ****
    28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xe000
    28.04.14 09:55:36,000 kernel[0]: NVDANV50HAL loaded and registered
    28.04.14 09:55:36,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    28.04.14 09:55:36,000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: Previous Shutdown Cause: 5
    28.04.14 09:55:36,000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    28.04.14 09:55:36,000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x6280 -- 0x3800 -- 0xe000 ****
    28.04.14 09:55:36,000 kernel[0]: DSMOS has arrived
    28.04.14 09:55:37,000 kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    28.04.14 09:55:38,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    28.04.14 09:55:38,142 configd[54]: setting hostname to "Susannes-Mac-mini.local"
    28.04.14 09:55:38,147 configd[54]: network changed.
    28.04.14 09:55:38,368 com.apple.SecurityServer[25]: Entering service
    28.04.14 09:55:38,000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0000,0de1,0005,45e1,0000]
    28.04.14 09:55:38,000 kernel[0]: 05f5e100  00500026  NVEthernet::setLinkStatus - Active
    28.04.14 09:55:39,000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0000,0de1,0005,45e1,0000]
    28.04.14 09:55:39,000 kernel[0]: 05f5e100  00500026  NVEthernet::setLinkStatus - Active
    28.04.14 09:55:41,920 digest-service[63]: label: default
    28.04.14 09:55:41,921 digest-service[63]:           dbname: od:/Local/Default
    28.04.14 09:55:41,921 digest-service[63]:           mkey_file: /var/db/krb5kdc/m-key
    28.04.14 09:55:41,921 digest-service[63]:           acl_file: /var/db/krb5kdc/kadmind.acl
    28.04.14 09:55:42,335 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    28.04.14 09:55:42,768 loginwindow[38]: Login Window Application Started
    28.04.14 09:55:43,026 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    28.04.14 09:55:43,278 airportd[61]: sandbox cache error 3850
    28.04.14 09:55:43,423 digest-service[63]: sandbox cache error 11: database disk image is malformed
    28.04.14 09:55:43,851 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28.04.14 09:55:44,005 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    28.04.14 09:55:44,942 digest-service[63]: digest-request: uid=0
    28.04.14 09:55:45,441 airportd[61]: airportdProcessDLILEvent: en1 attached (up)
    28.04.14 09:55:45,729 awacsd[57]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    28.04.14 09:55:46,356 awacsd[57]: InnerStore CopyAllZones: no info in Dynamic Store
    28.04.14 09:55:46,370 stackshot[21]: Timed out waiting for IOKit to finish matching.
    28.04.14 09:55:47,289 configd[54]: network changed.
    28.04.14 09:55:47,291 configd[54]: network changed: DNS*
    28.04.14 09:55:47,318 systemkeychain[82]: done file: /var/run/systemkeychaincheck.done
    28.04.14 09:55:47,593 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    28.04.14 09:55:47,723 mDNSResponder[35]: D2D_IPC: Loaded
    28.04.14 09:55:47,723 mDNSResponder[35]: D2DInitialize succeeded
    28.04.14 09:55:47,727 mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    28.04.14 09:55:48,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe000 ****
    28.04.14 09:55:48,846 networkd[98]: networkd.98 built Aug 24 2013 22:08:46
    28.04.14 09:55:48,926 digest-service[63]: digest-request: netr probe 0
    28.04.14 09:55:48,927 digest-service[63]: digest-request: init request
    28.04.14 09:55:49,050 digest-service[63]: digest-request: init return domain: BUILTIN server: SUSANNES-MAC-MINI indomain was: <NULL>
    28.04.14 09:55:49,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
    28.04.14 09:55:55,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    28.04.14 09:55:55,395 WindowServer[80]: Server is starting up
    28.04.14 09:55:55,554 WindowServer[80]: Session 256 retained (2 references)
    28.04.14 09:55:55,554 WindowServer[80]: Session 256 released (1 references)
    28.04.14 09:55:55,619 WindowServer[80]: Session 256 retained (2 references)
    28.04.14 09:55:55,689 WindowServer[80]: init_page_flip: page flip mode is on
    28.04.14 09:55:56,015 mds[34]: (Normal) FMW: FMW 0 0
    28.04.14 09:55:56,075 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    28.04.14 09:55:56,238 WindowServer[80]: Found 27 modes for display 0x00000000 [24, 3]
    28.04.14 09:55:56,569 WindowServer[80]: Found 1 modes for display 0x00000000 [1, 0]
    28.04.14 09:55:56,571 WindowServer[80]: mux_initialize: Couldn't find any matches
    28.04.14 09:55:56,572 WindowServer[80]: Found 27 modes for display 0x00000000 [24, 3]
    28.04.14 09:55:56,778 locationd[40]: Location icon should now be in state 'Inactive'
    28.04.14 09:55:56,964 WindowServer[80]: Found 1 modes for display 0x00000000 [1, 0]
    28.04.14 09:55:56,995 WindowServer[80]: WSMachineUsesNewStyleMirroring: false
    28.04.14 09:55:56,997 WindowServer[80]: Display 0x764bdc00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 27 modes available
    Main, Active, on-line, enabled, boot, Vendor 4dd9, Model 2f70, S/N 0, Unit 0, Rotation 0
    UUID 0x6077c6f135c4c44ddc359cba2050401d
    28.04.14 09:55:56,997 WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28.04.14 09:55:56,998 WindowServer[80]: WSSetWindowTransform: Singular matrix
    28.04.14 09:55:57,421 WindowServer[80]: Display 0x764bdc00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 27 modes available
    Main, Active, on-line, enabled, boot, Vendor 4dd9, Model 2f70, S/N 0, Unit 0, Rotation 0
    UUID 0x6077c6f135c4c44ddc359cba2050401d
    28.04.14 09:55:57,421 WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28.04.14 09:55:57,421 WindowServer[80]: CGXPerformInitialDisplayConfiguration
    28.04.14 09:55:57,421 WindowServer[80]:   Display 0x764bdc00: Unit 0; Vendor 0x4dd9 Model 0x2f70 S/N 0 Dimensions 13.31 x 10.63; online enabled, Bounds (0,0)[1280 x 1024], Rotation 0, Resolution 1
    28.04.14 09:55:57,422 WindowServer[80]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    28.04.14 09:55:57,592 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180C560 Susannes-Mac-mini.local. (AAAA) that's already in the list
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180C9F0 C.C.C.0.7.2.E.F.F.F.E.9.5.1.6.3.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180E160 Susannes-Mac-mini.local. (Addr) that's already in the list
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180E5F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    28.04.14 09:55:59,615 WindowServer[80]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x0000428b, unit 0, caps QEX|MIPMAP, vram 256 MB
    28.04.14 09:55:59,715 WindowServer[80]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    28.04.14 09:55:59,716 WindowServer[80]: GLCompositor enabled for tile size [256 x 256]
    28.04.14 09:55:59,716 WindowServer[80]: CGXGLInitMipMap: mip map mode is on
    28.04.14 09:55:59,726 WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28.04.14 09:55:59,801 loginwindow[38]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    28.04.14 09:56:00,154 configd[54]: network changed: v4(en0+:192.168.178.24) DNS+ Proxy+ SMB
    28.04.14 09:56:00,166 configd[54]: setting hostname to "susannes-mini.fritz.box"
    28.04.14 09:56:01,357 awacsd[57]: Exiting
    28.04.14 09:56:02,738 WindowServer[80]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fc9bb513090) - enabling OpenGL
    28.04.14 09:56:03,337 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:03,383 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:03,397 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:03,448 ntpd[106]: proto: precision = 1.000 usec
    28.04.14 09:56:03,489 launchctl[126]: com.apple.findmymacmessenger: Already loaded
    28.04.14 09:56:03,785 com.apple.SecurityServer[25]: Session 100004 created
    28.04.14 09:56:04,311 digest-service[63]: digest-request: uid=0
    28.04.14 09:56:04,312 digest-service[63]: digest-request: init request
    28.04.14 09:56:04,316 digest-service[63]: digest-request: init return domain: MACMINI-270CCC server: SUSANNES-MINI indomain was: <NULL>
    28.04.14 09:56:04,363 digest-service[63]: digest-request: uid=0
    28.04.14 09:56:04,364 digest-service[63]: digest-request: init request
    28.04.14 09:56:04,368 digest-service[63]: digest-request: init return domain: SUSANNES-MINI server: SUSANNES-MINI indomain was: <NULL>
    28.04.14 09:56:04,370 UserEventAgent[127]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28.04.14 09:56:05,219 loginwindow[38]: Login Window Started Security Agent
    28.04.14 09:56:05,648 SecurityAgent[142]: This is the first run
    28.04.14 09:56:05,649 SecurityAgent[142]: MacBuddy was run = 0
    28.04.14 09:56:05,672 SecurityAgent[142]: User info context values set for susannescherwinski
    28.04.14 09:56:06,399 loginwindow[38]: Login Window - Returned from Security Agent
    28.04.14 09:56:06,427 loginwindow[38]: USER_PROCESS: 38 console
    28.04.14 09:56:06,000 kernel[0]: AppleKeyStore:Sending lock change 0
    28.04.14 09:56:06,970 com.apple.launchd.peruser.501[145]: Background: Aqua: Registering new GUI session.
    28.04.14 09:56:06,996 com.apple.launchd.peruser.501[145]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
    28.04.14 09:56:06,998 com.apple.launchd.peruser.501[145]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    28.04.14 09:56:07,002 launchctl[147]: com.apple.pluginkit.pkd: Already loaded
    28.04.14 09:56:07,002 launchctl[147]: com.apple.sbd: Already loaded
    28.04.14 09:56:07,029 distnoted[149]: # distnote server agent  absolute time: 479.663146784   civil time: Mon Apr 28 09:56:07 2014   pid: 149 uid: 501  root: no
    28.04.14 09:56:07,530 UserEventAgent[148]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
    28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
    28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    28.04.14 09:56:07,732 com.apple.SecurityServer[25]: Session 100006 created
    28.04.14 09:56:07,760 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
    28.04.14 09:56:07,793 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:07,820 sharingd[170]: Starting Up...
    28.04.14 09:56:07,954 WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28.04.14 09:56:08,649 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:09,364 com.apple.IconServicesAgent[201]: IconServicesAgent launched.
    28.04.14 09:56:09,577 accountsd[202]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    28.04.14 09:56:09,719 com.apple.SecurityServer[25]: Session 100009 created
    28.04.14 09:56:10,587 WiFiKeychainProxy[182]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
    28.04.14 09:56:10,588 WiFiKeychainProxy[182]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    28.04.14 09:56:10,847 SystemUIServer[156]: Cannot find executable for CFBundle 0x7fb68855c320 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
    28.04.14 09:56:10,864 SystemUIServer[156]: Cannot find executable for CFBundle 0x7fb68847aab0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
    28.04.14 09:56:12,097 imagent[189]: [Warning] Services all disappeared, removing all dependent devices
    28.04.14 09:56:12,122 imagent[189]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
    28.04.14 09:56:12,123 imagent[189]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
    28.04.14 09:56:12,163 soagent[184]: [Warning] Services all disappeared, removing all dependent devices
    28.04.14 09:56:12,181 soagent[184]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:12,184 soagent[184]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:12,417 secd[207]:  __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
    28.04.14 09:56:12,417 secd[207]:  __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
    28.04.14 09:56:12,639 secd[207]:  SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    28.04.14 09:56:12,639 secd[207]:  securityd_xpc_dictionary_handler WiFiKeychainProx[182] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    28.04.14 09:56:12,944 com.apple.time[148]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    28.04.14 09:56:22,465 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:23,038 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:23,156 soagent[184]: Killing soagent.
    28.04.14 09:56:23,156 NotificationCenter[181]: SOHelperCenter main connection interrupted
    28.04.14 09:56:23,159 NotificationCenter[181]: SOHelperCenter main connection interrupted
    28.04.14 09:56:23,160 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:184)
    28.04.14 09:56:23,160 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:184)
    28.04.14 09:56:23,314 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:23,316 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:24,403 parentalcontrolsd[216]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    28.04.14 09:56:33,245 com.apple.time[148]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    28.04.14 09:56:33,310 soagent[217]: [Warning] Services all disappeared, removing all dependent devices
    28.04.14 09:56:33,318 soagent[217]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:33,467 com.apple.dock.extra[212]: No endpoint returned trying to load UnreadCountController.bundle, suspending
    28.04.14 09:56:33,493 soagent[217]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:33,494 soagent[217]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:44,319 soagent[217]: Killing soagent.
    28.04.14 09:56:44,320 com.apple.dock.extra[212]: SOHelperCenter main connection interrupted
    28.04.14 09:56:44,322 com.apple.dock.extra[212]: SOHelperCenter main connection interrupted
    28.04.14 09:56:44,324 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:217)
    28.04.14 09:56:44,324 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:217)
    28.04.14 10:00:56,532 WindowServer[80]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    28.04.14 10:00:57,256 WindowServer[80]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.72 seconds (server forcibly re-enabled them after 1.00 seconds)
    28.04.14 10:00:59,103 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x42d] flags: 0x8 binding: FileInfoBinding [0x1f3] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
    28.04.14 10:00:59,104 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:64 scale: 1
    28.04.14 10:00:59,143 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x3df] flags: 0x8 binding: FileInfoBinding [0x2e5] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
    28.04.14 10:00:59,144 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:64 scale: 1
    28.04.14 10:00:59,208 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x1f5] flags: 0x8 binding: FileInfoBinding [0x42f] - extension: mp3, UTI: public.mp3, fileType: MPG3.
    28.04.14 10:00:59,208 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: mp3, UTI: public.mp3, fileType: MPG3 request size:64 scale: 1
    28.04.14 10:01:03,377 mds[34]: (Normal) Volume: volume:0x7f9c5c863000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.S2FNIL
    28.04.14 10:01:17,708 System Events[269]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
    28.04.14 10:01:17,709 System Events[269]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
    28.04.14 10:01:24,175 Safari[219]: ERROR: ForceShrinkPersistentStore_NoLock -delete- We do not have a BLOB or TEXT column type.  Instead, we have 5.

    Anybody?
    Did I something wrong? Too many lines of log? Wrong category? Enlighten me. Thx.

  • MBP working very slow, rarely displays working wheel

    Hi guys,
    My MBP is working very slow.
    I have taken off AVG, and in my user account I've stopped Soundflower from launching automatically. This seemed to help for a few days, then it's back to dragging.
    I used Etre; but don't know the items mean...
    Thanks so much in Advance.
    EtreCheck version: 1.9.12 (48)
    Report generated 16 August 2014 9:28:32 am GMT+7
    Hardware Information:
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
      4 GB RAM
    Video Information:
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 16 days 1:7:35
    Disk Information:
      Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (76.15 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information:
      Apple Internal Memory Card Reader
      Apple Inc. iPhone
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Configuration files:
      /etc/sysctl.conf - Exists
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
      [not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (1.0.1) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (2.1.1) Support
      [not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.1) Support
    Problem System Launch Daemons:
      [failed] com.apple.AOSNotificationOSX.plist
      [failed] com.apple.wdhelper.plist
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.sierrawireless.SWoCTool.plist Support
      [not loaded] com.teamviewer.teamviewer_service.plist Support
    Launch Agents:
      [not loaded] com.teamviewer.teamviewer.plist Support
      [not loaded] com.teamviewer.teamviewer_desktop.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.spotify.webhelper.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items:
      Dropbox
      Google Chrome
      Notes
      Messages
      Calendar
    Internet Plug-ins:
      Google Earth Web Plug-in: Version: 7.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      OfficeLiveBrowserPlugin: Version: 12.3.1 Support
      Silverlight: Version: 3.0.50106.0 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
      AdobePDFViewer: Version: 9.5.5 Support
      EPPEX Plugin: Version: 3.0.5.0 Support
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 226.37 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 
      Total number of backups: 77
      Oldest backup: 2011-12-22 20:28:21 +0000
      Last backup: 2014-08-11 11:05:24 +0000
      Size of backup disk: Excellent
      Backup size 2  > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          4% WindowServer
          2% Image Capture Extension
          1% softwareupdated
          1% systemstatsd
          1% diskimages-helper
    Top Processes by Memory:
      292 MB Image Capture Extension
      98 MB Finder
      90 MB iPhoto
      78 MB WindowServer
      54 MB com.apple.quicklook.satellite
    Virtual Memory Information:
      21 MB Free RAM
      824 MB Active RAM
      798 MB Inactive RAM
      635 MB Wired RAM
      74.58 GB Page-ins
      1.59 GB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for

  • [installation] studio creator on Suse 10.1

    Hi there, on my laptop (1,7 Ghz cpu, 1 Ghz ram), runs Suse 10.1(kernel Linux 2.6.16.13-4-default i686) and I'd like install studio creator wich is at moment on XP (and I'm not very happy about the performance). But looking at http://developers.sun.co

  • Question for drag'n'drop...

    Hi, I am not sure whether my BlackBerry Pearl is the 8100 or 8200 series--I bought it refurb with no booklets or anything. It came with various cords, like a USB cord and a Power Cord, though. Anyway, I hit up the http://na.blackberry.com/eng/service

  • Weblogic.utils.AssertionError when getting attributes of EJBComponentMBean

    when i get the attributes of this mbean, i get an assertion error. the javadocs do not say anything about this...so how can i prevent this assertion error? here is the code, and below is the error on weblogic Properties p = new Properties(); p.put(Co

  • Live Updating mangles smart playlist sync - again and forever?

    For the last several itunes updates, setting a smart playlist to Live Update causes the order of playlist items to become mangled on synced deviceL Unchecking the Live Updating restores the proper order to the items on the synced device. Its a huge p

  • Créer une bibliothéque

    bonjour, voila je travaille sur un exemple labview comportant plusieurs sous vi mais lorsque je le modifie je ne plus travailler sur aucun autre pc que le mien. on m adit de créer une copie mais la ça ne marche pas non plus . maintenant on me dit de