V$session

Hi,
my customer is worry that there are a number of v$session created when the portal user login into the Oracle Portal.
The user said that there are about 4 records in v$session (database connection ?) each portal user login. And these will stay there for a while. They are worry if there are a lot of users login a the same time.
What are these connection as show in v$session ? (they see username such as pubic30_public, portal30, etc).
Will there be performance issues ?
rdgs

Those are connections that are made by modplsql to the database. modplsql manages a connection pool to reuse these connections as web requests are received. This is no cause for concern.
Please see the following link for information on tuning modplsql.
Performance Tuning in modplsql

Similar Messages

Sso session timeout per partner application

Hello,
I was just wondering if it is possible to configure SSO session timeouts per partner application? I'm looking to log out users of a particular application after 15 minutes, but don't want this change to affect any of my other SSO enabled applications. Is this possible?
Thanks,

Hi,
I do not think so, you can not specify specail parameter for one application in SSO.
Why because SSO is one component (within your Infra) through which you logon different apps.
Another solution may be it will expensive is that you 'll need to use different infra for this specific application.
Regards,
Hamdy

SSO Partner Application and Session Time out

Hi ,
We have an application on forums.oracle.com which is implementing the Authentication scheme as SSO, that is working well, now we want to implement Session Time out if the user is idle for some time and ask him to login again after the session fails, I have tried to implement this feature as given by Scott in the thread session timeout , well the problem is since we dont have a login page here how do we set the cookies owa_cookie.send(
name => 'HTMLDB_IDLE_SESSION',
value => to_char(sysdate+(20/1440),'DD-MON-YYYY HH24:MI:SS'),
expires => null,
path => '/',
domain => null
and where is the current point to implement it.
Any help on this is greatly welcome.
Thanks in Advance.

Naveen,
I don't remember how the solution works. But if you don't have a login page you can usually put code in the post-authentication process of your authentication scheme to do whatever the login page process would have done.
Scott

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

IMac running 10.7.3 stuck on rainbow wheel right after desktop launches and google chrome trying to restore a previous browsing session

Hello All - thanks in advance for your help with this.
The problem I'm encountering is on an iMac 24" from 2008, Intel Core 2Duo 1.3 GHz processor. I'm running 10.7.3 but have yet to install the client combo update.
My computer would not wake from sleep this morning after having been left on all night. The last two apps I had been running last night before this morning's freeze up were Google Chrome and iTunes. I restarted the computer and noticed at the login screen that one of the login accounts that is normally set up for use had disappeared. Once I logged in to my account, which had not disappeared, and arrived at the desktop, Chrome automatically tried to relaunch and restore the previous session with a note indicating that the browser had not been quit properly.
iTunes was running as well but had no functionality - non responsive to mouse click commands, etc. About thirty seconds later the rainbow wheel appeared and began spinning.
Tried force quitting both applications applications respectively but the finder was non-responsive as well. The dock would pop up when moused over but I was not permitted to select any of the icons. Restarted the computer and essentially the same thing occurred but I was able to quit out of iTunes this time before the rainbow wheel started.
Tried restarting with all peripheral hardware disconnected. No change. Tried booting up in safe mode - didn't work. Rebooted in disk utility mode - ran disk verification and was told all was well. Ran permissions verifications and was told there were problems. Repaired the permissions issues successfully. Rebooted again but same issue with desktop/apps freezing up. Rebooted into Disk Utility mode and tried a reinstall of lion - reinstall successul but upon normal reboot desktop still frozen once I launched Chrome and attempted to get to apple site to download the 10.7.3 patch.
Tried rebooting in disk utility mode to restore from a time machine back up - the external hard drive where my back ups are stored did not appear as a restore source even though I had reconnected the USB cable.
I then rebooted again into disk utility mode and tried to use safari to navigate to the apple site and download the 10.7.3 client combo update. No dice - received error messages saying the download could not be completed because there was insufficient memory available.
Called Apple - rep said I should take the computer in to the store - refused as of the time of the call because I had already wasted half the day on this and didn't want to flush the remainder down the toilet hanging around at the Apple store. So much for that - the day is now totally wasted any way.
Another couple of bits of information which may or may not be helpful:
When I'm in disk utility mode the disk image icon at the top of the list of disk images/mounts on the left hand side of the utility window is in red text: 320.07 GB WDC WD320...and the main dialogue box says: "This drive has a hardware problem that can't be repaired. Back up Data and see Apple dealer for help." One might conclude that my computer is therefore dead...not exactly. This happened once before after trying to set up a bootcamp partition using XP instead of windows 7. XP is not supported by Lion but I was trying a work around. Soon thereafter I upgraded my OS to 10.7.2 (or.3 can't remember) using software updater instead of a full native download from the Apple Support site and the computer went bananas. After the upgrade I was getting the CUI ???? errors which have since become infamous. While working with Apple phone support on the CUI issue and using disk utility on that issue, that same red text disc image came up and the note about my hardware having failed as described above. Apple told me I was cooked and my machine was finished. They were wrong. I can't remember what I did but I worked on the problem a bit more and was eventually able to upgrade my OS from the native download and get my machine back in order and runnign fine.
I recently attempted the bootcamp partition (stupidly) work around for XP again without success - last week before all of the latest drama set in. YES I have learned my lession and will not attempt this again.
So that's what's going on - sorry for the Moby Dick lenght description but I figured the more details available the more likely some one is to know how to fix the problem.
Any thoughts, suggestions, HELP please!!!
Thanks.

Hello All - thanks in advance for your help with this.
The problem I'm encountering is on an iMac 24" from 2008, Intel Core 2Duo 1.3 GHz processor. I'm running 10.7.3 but have yet to install the client combo update.
My computer would not wake from sleep this morning after having been left on all night. The last two apps I had been running last night before this morning's freeze up were Google Chrome and iTunes. I restarted the computer and noticed at the login screen that one of the login accounts that is normally set up for use had disappeared. Once I logged in to my account, which had not disappeared, and arrived at the desktop, Chrome automatically tried to relaunch and restore the previous session with a note indicating that the browser had not been quit properly.
iTunes was running as well but had no functionality - non responsive to mouse click commands, etc. About thirty seconds later the rainbow wheel appeared and began spinning.
Tried force quitting both applications applications respectively but the finder was non-responsive as well. The dock would pop up when moused over but I was not permitted to select any of the icons. Restarted the computer and essentially the same thing occurred but I was able to quit out of iTunes this time before the rainbow wheel started.
Tried restarting with all peripheral hardware disconnected. No change. Tried booting up in safe mode - didn't work. Rebooted in disk utility mode - ran disk verification and was told all was well. Ran permissions verifications and was told there were problems. Repaired the permissions issues successfully. Rebooted again but same issue with desktop/apps freezing up. Rebooted into Disk Utility mode and tried a reinstall of lion - reinstall successul but upon normal reboot desktop still frozen once I launched Chrome and attempted to get to apple site to download the 10.7.3 patch.
Tried rebooting in disk utility mode to restore from a time machine back up - the external hard drive where my back ups are stored did not appear as a restore source even though I had reconnected the USB cable.
I then rebooted again into disk utility mode and tried to use safari to navigate to the apple site and download the 10.7.3 client combo update. No dice - received error messages saying the download could not be completed because there was insufficient memory available.
Called Apple - rep said I should take the computer in to the store - refused as of the time of the call because I had already wasted half the day on this and didn't want to flush the remainder down the toilet hanging around at the Apple store. So much for that - the day is now totally wasted any way.
Another couple of bits of information which may or may not be helpful:
When I'm in disk utility mode the disk image icon at the top of the list of disk images/mounts on the left hand side of the utility window is in red text: 320.07 GB WDC WD320...and the main dialogue box says: "This drive has a hardware problem that can't be repaired. Back up Data and see Apple dealer for help." One might conclude that my computer is therefore dead...not exactly. This happened once before after trying to set up a bootcamp partition using XP instead of windows 7. XP is not supported by Lion but I was trying a work around. Soon thereafter I upgraded my OS to 10.7.2 (or.3 can't remember) using software updater instead of a full native download from the Apple Support site and the computer went bananas. After the upgrade I was getting the CUI ???? errors which have since become infamous. While working with Apple phone support on the CUI issue and using disk utility on that issue, that same red text disc image came up and the note about my hardware having failed as described above. Apple told me I was cooked and my machine was finished. They were wrong. I can't remember what I did but I worked on the problem a bit more and was eventually able to upgrade my OS from the native download and get my machine back in order and runnign fine.
I recently attempted the bootcamp partition (stupidly) work around for XP again without success - last week before all of the latest drama set in. YES I have learned my lession and will not attempt this again.
So that's what's going on - sorry for the Moby Dick lenght description but I figured the more details available the more likely some one is to know how to fix the problem.
Any thoughts, suggestions, HELP please!!!
Thanks.

When I login to EBS as Japan language session some Forms Application is Eng

Hi ,
have recently applied japan NLS on r121.1 and later upgraded to 12.1.3 also applied 9239090(japan as well).
But customer has complained the error below.
Any ideas on it .
Forms Application is still English.
When I login to EBS as Japan language session, some Forms Application is English.
e.g
user MFG
pass welcome
Resp Manufacturing and Distribution Manager
Path Inventory>品目>品目関連
Thanks

ls: /u100/app/HONDA1/orhonda1/oracle/aphonda1/apps/apps_st/appl/po/12.0.0/forms/JA/POXRQVRQ.fmx: No such file or directoryThis indicates that the fmx file was not generated via adadmin -- Can you upload the adadmin log file here?
and also, after logging into the application selecting japan,to the left side i can see some responsibilities in english still..Is this the normal behaviour.No.
Have you generated all NLS menus via adadmin? If possible, upload the log file.
In the preferences tab when i check,logging to application with english can see the below..
Current Session Language :- American English
Default Session Language :- American English
Is the above correct ?
Do we need to perform any steps to so that we can see the responsibilites in english.Change the session language to Japanese and check then.
Thanks,
Hussein

SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"

Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0

AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8

Problem with Sessions and window.open

Hi,
Hi everyone,
Help Please!!!
I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
THANK YOU IN ADVANCE!!!
MA

To achieve this, you must introduce another level of
abstraction to the Servlet specifications. When you
work with JSP/Servlets you use mostly the HttpSession
to handle user related tasks, and the aplication
context, for things that are common to all users. But
inside the HttpSession scope, you want to create
containers that have 'smaller' scope and are uniquely
identified.
A ipothetical scenario :Let's say that you must have
multiple connections to several databases, on each
database user rights beeing diferrent, and you must be
able to track user actions globaly, and eventualy
capture a 'Close Application event' and close all db.
connections.
1. when the user first accesses the login frame create
the HttpSession. In the HttpSession object, store a
Hastable (let's call it 'ConnectionTable'). Each
object in the Hashtable must identify uniqely a
database connection. Now, to create unique identifiers
ids, make the keys in the hashtable java.lang.Long
objects, created using System.getCurrentTimeMillis().
This guaranties there will be no possible confusion.
From each new open window, on each request to the
server, along with the usefull parameters, send the
connection identifier. When proccessing the request,
select the object from the Hastable wich corresponds
to the ID.
2. Now, the values in the ConnectionTable, must act as
the containers that I mentioned in the first
paragraph. The simplest way to do this is to have
again a Hashtable derived class to do the job, wich
exploses methods similar to HttpSession: setAttibute (
Object key, Object value) and getAttibute ( Object
key, Object value). This container may use internally
a Hashtable to store object, and explose only the
getAttribute and setAttribute methods for clarity. Any
way, this is a problem of implementation. Let's call
this class CustomSession.
Now, a textual activity diagram:
1 user accesses the main page, you start a new
HttpSession; In the HttpSession object, store the
ConnectionTable object.
2. the user enters the userID and pwd and adatabase
name, and a new window is opened. Let's supose the
data entered is valid.
3. when you process the login data, you create a new
CustomSession object. you put in it whatever you would
put in your HttpSession. You generate a unique
identifier using System.CurrentTimeMillis(). Put the
CustomSession object in the ConnectionTable, using the
generated id as key. Send the response.
..... later on .....
100. the user asks for a particular action to be
performed - e.g. a row deletion. The page contains a
form with text field where the user introduces the
row number, a submit button and a hidden input with
the ID.
101. you process the data. Get the ID from the request
object, get the ConnectionTable from the session, get
the CustomSession using the ID as key, do whatever
your logic was doing, but obtaining the objects from
the CustomSession instead of HttpSession
NicNic,
Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

How do I stop FF from restoring previous session, I've already played with all the options I can find but nothing stops it unless I delete history each time.

Recently, FF has started opening my last tabs when I start a fresh session. I have already checked to make sure that none of the applicable settings are enabled, such as under Options->General: When FF starts "SHOW MY HOMEPAGE" is selected. But for some reason, it opens my last session. The only way I've been able to get it to stop doing this is by having it delete my browsing history after I close the session. I don't want this since I often use my history to re-find information I need for class research. I have made certain that all my settings are the same from before FF started doing this. It only started doing this after the computer was turned off for a long weekend.
I've already searched through the Mozilla help pages and all I can find is how to restore the previous session or similar. I don't want to restore my previous session, I want it to stop restoring my previous session without having to delete my browsing history each time.

Using the instructions here:
http://kb.mozillazine.org/Session_Restore#Disabling_crash_recovery
I was able to turn off that feature entirely without having to create a new profile.

Open all pages from last session

Occasionally, safari will die. When I restart safari:
is there a function to open all pages from last session?
does firefox have this function? I thought I saw it within firefox, but I can't find it now. If this function is in firefox, where is it?

In Safari... History > Open all pages from last session
Firefox should do it automatically.
Dave

Firefox will not open new windows, opens with session restore every time I use it, and won't let me open the throubleshooting tab... Why?

Whenever I try to open a new window, nothing happens. This includes clicking ctrl+N and through the drop down menu.
Also, whenever I start firefox to browse the internet, it always open with a Session Restore with the previous session listed, even though I closed all the tabs and shut it down normally without any prompts telling me about saving multiple tabs.
Finally, when I tried to troubleshoot this problem, the tab never appeared. The only options that work on the Help Menu are:
- Firefox Help (after a few clicks)
- Report Broken Web Site
- Check for Updates
- About Firefox

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
There are other things that need your attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/

Open new session on submitting a program thru FM call

Hi expertz...need your help up here.
Have a situation where we need to trigger another program(say zabc : PO History) when the user selects a line in the ALV list and then clicks a button (to call zabc), the new program should run in the background and open up or display the results in a New Session.
Have tried to use FM 'SUBMIT_REPORT' with STARTING NEW TASK but it dosnt work. Please see the call below.
CALL FUNCTION 'SUBMIT_REPORT' "STARTING NEW TASK 'TEST1'
EXPORTING
RDIR                   = TRDIR
    report                 = 'ZPRPP_WORKORDERPURCHASING'
   RET_VIA_LEAVE          = ' '
VARIANT                = ' '
   VARIPROG               = 'ZPRPP_WORKORDERPURCHASING'
   SKIP_SELSCREEN         = 'X'
EXPRESSIONS            =
IMPORTING
VARIANT                =
TABLES
   SELECTION_TABLE        = i_rspar
EXCEPTIONS
   JUST_VIA_VARIANT       = 1
   NO_SUBMIT_AUTH         = 2
   OTHERS                 = 3
Any Idea!.
Thanks
Jaif

Hi,
copy your function module SUBMIT_REPORT to ZSUBMIT_REPORT and make it remote enabled.
Now, where ever you want to call this FM, call as below,
CALL FUNCTION 'ZSUBMIT_REPORT' STARTING NEW TASK 'T'
EXPORTING
* RDIR = TRDIR
report = 'ZPRPP_WORKORDERPURCHASING'
RET_VIA_LEAVE = ' '
* VARIANT = ' '
VARIPROG = 'ZPRPP_WORKORDERPURCHASING'
SKIP_SELSCREEN = 'X'
* EXPRESSIONS =
* IMPORTING
* VARIANT =
TABLES
SELECTION_TABLE = i_rspar
EXCEPTIONS
JUST_VIA_VARIANT = 1
NO_SUBMIT_AUTH = 2
OTHERS = 3.
Check it out, it works for me.

To pass new session variable value to stored proc before running a report.

Hi,
Below is summary of the report requirement -
Database level design
1. Created a view and a global temporary table (GTT)
2. Created an Oracle package procedure to accept from and to business dates on basis of which it will fetch, process and populate the GTT.
Repository level design
1. Created a business model containing the view and the GTT (mentioned above)
2. Created two SESSION variables "from_dt" and "to_dt" to be initialized by their respective init blocks. Each of the variable is initialized with a DATE column value (of type DATETIME) from a database lookup table. I have also set the option "Enable that variable to be set by any user" for both variables.
Query for these variables :
from_dt = select from_date from <table>
to_dt = select add_months(from_date,12) from <table>
Presentation level design
1. Using a text box, i display the default/initialized values of these variables like this -
Current business date:@{biServer.variables['NQ_SESSION.from_dt']} Future business dt:@{biServer.variables['NQ_SESSION.to_dt']}
Dates get displayed in YYYY-MM-DD 00:00:00 format
The text msg displays these default dates and allows the user to specift different date range for which i create prompts as shown below.
2. Using any random two columns of date type from the business model, i create two date dashboard prompts with labels "From Dt" and "To Dt".
i select Calender Controls for both; setting Default To = Report Defaults.
The Set Variable is set to Presentation variables - such that pv_from_dt maps to "From Dt" and pv_to_dt maps to "To Dt".
3. i create the report using the business model created above. In the report "Advanced Tab" => "Prefix" field i specify the following -
SET VARIABLE from_dt='@{pv_from_dt}',to_dt='@{pv_to_dt}';
Note : The logic here is to display the default dates and allow user to specify different date values which will be stored in presentation variables.
If the user does specify different "from dt" and "to dt" values, then using the presentation variables, i want to "write" back these new values to the corresponding session variables mentioned above.
If the user does not specify different date range, then the default/initialized dates must be considered.
I also display the default and new date values in the report title.
Back to Repository level design
To execute the stored procedure that will load the GTT before running the report I need to pass two date parameters to the stored procedure on basis of which it will fetch data, process and populate the GTT.
In the Connection Pool --> Connection Script Tab --> Execute before query, I wrote the below query using the repository variables FROM_DT and TO_DT to execute the procedure -
DECLARE
v_from_dt date;
v_to_dt date;
BEGIN
v_from_dt := VALUEOF(From_Dt);
v_to_dt := VALUEOF(To_Dt);
package_name1.package_body(v_from_dt,v_to_dt);
END;
Now when i try to run the report i get the following error :
[nQSError: 10058] A general error has occurred. [nQSError: 23006] The session variable, NQ_SESSION.to_dt, has no value definition. (HY000)..
Need help on this.
Is it possible to "write back" a new value to a session variable ?
Any other alternatives.
Thanks
Nusrat
Edited by: user10309945 on Jan 24, 2011 10:08 PM

Sandeep, I found a several topics where users describe saving values in DB through stored procedure or function. For example, [How to store OBIEE presentation level variable values in DB |http://forums.oracle.com/forums/thread.jspa?threadID=892006] I tried it and get an error
*10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 14551, message: ORA-14551: cannot perform a DML operation inside a query ORA-06512*
It's not a BI error. This error are generated by Oracle DB. If I write next:
SELECT MyPLSQLFunction(p1,p2) FROM DUAL
I get the same error.
Oracle doesn't allow DML operations in SELECT.
Did you relalize this feature yourself? Where did I mistake?

Session Timeouts and SmbServer

Hi,
When having iFS mapped to a network drive (via SMB), the SMB server
is unable to recover from a timeout of the LibrarySession. The network
drive then seems to be empty and doing a refresh within explorer
doesn't help either. The only thing that helps, is remapping the
network drive.
Within Node.log of iFS I see this stacktrace.
7/10/02 9:02 AM SmbServer: oracle.ifs.common.IfsException
oracle.ifs.common.IfsException: IFS-21000: Session is not connected or has timed-out
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at oracle.ifs.common.IfsException.<init>(Compiled Code)
at oracle.ifs.common.IfsException.<init>(Compiled Code)
at oracle.ifs.common.IfsException.<init>(Compiled Code)
at oracle.ifs.beans.LibraryObject.verifyConnected(Compiled Code)
at oracle.ifs.beans.Folder.findPublicObjectByPath(Compiled Code)
at oracle.ifs.beans.FolderPathResolver.findPublicObjectByPath(Compiled Code)
at oracle.ifs.beans.FolderPathResolver.findPublicObjectByPath(Compiled Code)
at oracle.ifs.protocols.smb.server.DbTree$DbQuery.<init>(Compiled Code)
at oracle.ifs.protocols.smb.server.DbTree.getQuery(Compiled Code)
at oracle.ifs.protocols.smb.server.ComTrans.trans2FindFirst(Compiled Code)
at oracle.ifs.protocols.smb.server.ComTrans.replyTransaction2(Compiled Code)
at oracle.ifs.protocols.smb.server.ComTrans.process(Compiled Code)
at oracle.ifs.protocols.smb.server.ComSmb.handleSmbMessage(Compiled Code)
at oracle.ifs.protocols.smb.server.SmbThread.handleNbMessage(Compiled Code)
at oracle.ifs.protocols.smb.server.SmbThread.readPackets(Compiled Code)
at oracle.ifs.protocols.smb.server.SmbThread.run(Compiled Code)
This behavior actually causes us big problems when editing files via MS Office.
Fortunately Office is able to still save it's data using some generated filename.
(At least until now I could not create any data loss)
But then you have to close it, remap then network drive, rename the file and then
reopen the file. This is big trouble to users, which are not familiar with mapping
network drives and renaming files with extensions.
Is there a way to make the SmbServer keep the LibrarySession alive, as long as
the network drive is mapped ?
Regards,
Jens Lorenz

Workflow #2:
Login to my account
Click view all email
Open Drafts Folder
Open draft email response
Select "Send" to send email (total in session time of 30 seconds)
On screen reload, where I would expect to see some sort of indication that my email was successfully sent, instead the system throws session time out message and kicks me out.
I have no idea if my email was successfully sent or not.
Workflow #3:
Login to my account
Click view all email
Attempted to open the first new email in my inbox (total time in session <15 seconds)
System throws session timeout error and kicks me out to the main login.
There is obviously something going on with your session holding code. The session variable is not being passed correctly or something but it's very, very frustrating to spend 30-45 minutes trying to type out a couple of lines, particularly when you have multiple important activities going on that you need to respond too via email.

How open multiple responsibilities in the same user login session in R12 ?

Dear All,
Can anyone help me to know how to open multiple responsibility in the same user login session in R12 ?
Thanks..
Edited by: G-oracle on Sep 18, 2011 11:22 AM

Can anyone help me to know how to open multiple responsibility in the same user login session in R12 ?What do you mean by open multiple responsibilities in the same session? You can only see the menu of one responsibility at a time, so how to do you expect the application to let you see multiple responsibilities/menus in one session?
You could open another session and this way you can access more than one responsibility at the same time.
Thanks,
Hussein

How can i design a EJB application using session Beans?

Hello,
I am designing a Find application using EJB. Here a user is prompted a search page, where he can enter the search criteria's. Then on click of submit, the query is formed at the server side depending on what criteria's were selected. Then a jdbc query is performed and the results are returned back to the user. Here no session is maintained for the users. Can anyone suggest me how to design this application using EJB. Should i use entity beans for this or session beans will suffice? Should the jdbc query be performed in the bean itself or should it be outside in a helper class? Please kindlu suggest me the design for this application...
Regards,
Subbu

Hi,
First of all, I'm unable to figure out why you need to use EJB for this scenario. You can write a helper class to frame and execute the query.
If you really want to use EJB, then I suggest you use a stateless Session Bean with transaction attribute as TX_NOT_SUPPORTED. From the session bean, you can call the helper class. But, by avoiding the session bean, you can eliminate remote calls, thus improving your performance. Also, check if the database & the db driver you are using supports sql caching.
Regards,
Raj.

V$session

Similar Messages

Maybe you are looking for