V$SYSMETRIC_HISTORY and time refresh

Hello .
How to change time refresh for V$SYSMETRIC_HISTORY view?
Default value is 15 seconds, but I would like to change it to 1 second.
Marcin

No, that's oracle's internals
~ Madrid

Similar Messages

Time Config and Metric Refreshes

Post Author: owen
CA Forum: Performance Management and Dashboards
I have a daily calendar setup for the finnacial year 01/04/08 to 31/03/09 set up in Time Config.
When setting up my metrics i selected the option to stop at current period, which only gives values up to yesterday.
Taking off the stop at current period creates values up until 31/03/2009, most of which are blank. When these are displayed in IMT's etc you get all the blanks on the report and a little bit of data for the beginning of the year. A complete purge and refresh needs to be done to get new values each day.
Does anyone know of a way of getting it to run up to and including today?

Post Author: jezbraker
CA Forum: Performance Management and Dashboards
The idea is that until the period actually ends why would you want to refresh the metric - and thats why it defaults to stop at the last completed period rather than "current".To get around this you need to play about with the "stop metric calculation" part and use the rules engine to mess with the CI_PROBE table.You create your daily metric with Stop at Current Period turned off and set a fixed end date to allow the metric to refresh "today". when you refresh, it will back fill and obviously refresh until today. Thats great but of course if you click refresh tomorrow nothing will happen.So what you then do is schedule rule to refresh a metric refresh daily at the desired time, and add an action before the metric refresh action that uses the Execute sql action. in this you connect up to the EPM repository tables (all the CI_* stuff) and update the CI_PROBE table by adding a day to the stop field... think its called end_date - or possible stop_date...I recall doing something similar for a customer that wanted a metric to be refreshed every hour (hence overwriting the last hours value and only sotring the value of the last hour of the day in the metric history) obviously EPM isnt designed to work houry but using freesql rules did the job. The other option is to mess about with the servers clock of course - but thats a bit hacky for most

How to limit data range in a Line chart with Time Refresh Control

Hi All,
I have a Line chart with Time Refresh Control and I would like to make some constraints to this navigation.
For example, I would like to limit the user to navigate in a data range of 8 hours.
Is this posible?
Thanks in advance

Hi Pedro,
as far as I know, this is not possible using the time controls on an iChart. However, you may have some success by using your own time controls which call JavaScript methods exposed by the applet.
For example, you could begin by hiding the time and calendar buttons on an iChart, and creating some buttons of your own. For instance, to set the start date of a query (and thus the start date of the iChart using the query), you can use the following:
document.getElementById("appletID").getQueryObject().setStartDate(<date string>);
Using code like the above (look into the xMII script assistant and documentation), you should be able to build time controls which satisfy your requirements. The exact format of <date string> in the sample above will depend on the date format defined in the query template this script calls.
Hope this helps,
Sascha

Problem reopening and/or refreshing PDF files using Acrobat Reader V. 8.0

I upgraded to Adobe Acrobat Reader V. 8.0 and have encountered problems refreshing PDF files in the Safari 2.0.4 browser when I am logged into the secure area for Value Line Publishing. Some of the PDF Files in this area can be opened and/or refreshed multiple times. Other PDF files in this area allow me to open them once. I cannot reopen those previously viewed files (or refresh the screen) -- after refreshing, the window changes to a blank white screen, and the files do not reopen.
I am perplexed because I do not have difficulty refreshing the PDF files (within Safari) using the native PDF viewer, I did not have problems refreshing files using Acrobat Reader V. 7.0 and I do not appear to have problems refreshing PDF files using Acrobat Reader V. 8.0 when I am outside the secure area or on other web sites.
I have replaced the Acrobat Reader plug-in, manually removed all remnants of previous versions of Acrobat Reader and reinstalled V. 8.0. and I also upgraded from Mac OS 10.4.8 to 10.4 9, all to no avail.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
I can also download the PDF files to my hard drive and refresh them multiple times within Safari and also using Acrobat Reader V. 8.0
The software personnel at Value Line Publishing have investigated their system and have referred me back to Apple. Has anyone heard of similar problems associated with Adobe Acrobat Reader V. 8.0 used in conjunction with Safari 2.0.4?
PowerBook G4 Mac OS X (10.3.9)

Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back

Show active current date and time in a Form continuously

Hi,
I am use Oracle Form 10.1.2 in Windows 2000.
Can we show an active current date and time in a Form continuously?
Perhaps in the main menu form.
So the user can see the moving time, instantly when the time change (withour pushing F5 for refreshing the form)
23-Sep-2006 06:00
-- one minute later will show
23-Sep-2006 06:01
-- one minute later will show
23-Sep-2006 06:02
-- and so on
Any help is appreciated.
Many thanks,
Buntoro

Here is a quick, untested suggestion that sketches out one way of approaching this.
If you only require updates every 60 seconds, you can use the TIMER built-in to create a repeating timer with a sixty-second delay. Each time the timer expires, update a text item to reflect the current time (obtained by selecting SYSDATE from DUAL on the database.)
If the time is to be updated precisely when the minute changes, use two timers -- the same one described above, and a one-shot. Before you create either timer, run the following query:
SELECT 60-TO_NUMBER(TO_CHAR(SYSDATE, 'ss')) FROM DUALThis will give the number of seconds remaining until the minute changes. Use this value to set the duration of the one-shot timer. When it expires, create the repeating sixty-second timer.
There is a good possibility that this method will not be terribly precise, depending on factors like server resources, user load and network distance. A more network-friendly approach would be to use a JavaBean that relies on the PC's system timer to track the passage of time, and calculates server time based on the observed time difference between PC & server.
Hope this helps,
Eric Adamson
Lansing, Michigan

How can I set my date and time to ebay network time server?

In the system preferences I would like to set the date and time to ebay UK time?
I thought a quick google would be bring up the server and I can't find it.
At the bottom of every ebay page there is a link to official ebay time
But its not a live feed of time to get it to the second.
I want it to be accurate so that I can use applescript to snipe bargins.
Many Thanks
Matt

Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

How to capture the date and time of a background job

Hi experts,
How to capture the date and time of a background job?
How to find whether it is runned succesfully or not?
If it is not successful how to put error message?
ASAP
Thanx in advance,
Sudha

To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
    WHEN 'S'. WRITE: / 'Scheduled'.
    WHEN 'R'. WRITE: / 'Released'.
    WHEN 'F'. WRITE: / 'Completed'.
    WHEN 'A'. WRITE: / 'Cancelled'.
    WHEN OTHERS.
ENDCASE.

Color coding in the "Date" and "Time" field in "Person Assignment"

Hi,
What does it mean when the color of the values for the "Date" and "Time" fields under the tab "Person Assignment" on an activity element in the project builder (CJ20N) turn red?
Regards,
Petter Kvalvik

Hi,
I dont suppose we have any option to achieve this at Query Designer level. Your requirement can be achieved in Workbook,
Insert text template in one of the cell in your workbook, context menu--properties-Constant Tab----Check Display last Refreshed. Doing this you will get Date and Time of last refreshed data.
Thanks,
Vishnu.

Parameterfield "date and time"

When I add a parameterfield for date and time (static) in Crystal XI and while refreshing the datarecords you choose to refresh this parameterfield with the current date, the current time is not adjusted.
When choosing to refresh the parameterfield in Crystal 8.0 it automatically comes up with the current date and time.
How can I arrange this in version XI ?

If you are encountering this issue in the Crystal Reports Designer, please post to the Crystal Reports Design forum:
SAP Crystal Reports
If this is happening in a custom application, please post to the SDK development forum:
https://www.sdn.sap.com/irj/sdn/businessobjects-sdk-forums
Posting to the correct forum will ensure faster qualified response times.
Ludek

Reportable Last Modified Date and Time Field

Reportable Last Modified Date and Time Field
Hello,
We need a reportable RequestCenter 'last modified date/time' database field that is refreshed when the 'Comments and History' field is updated. Any ideas would be appreciated. Thanks!

No, unless you can use an FTP client.

HT2305 how can I correct my date and time on my 3G?

How can I correct my date and time on my 3G? Thanks in advance!

Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

Simple Date and Time Applet....

Obviously I am a java newbie... I just need to know how to write a simple java applet that displays the current date and time... refreshing every second... in a small sans-serif font. Does anyone know where I can find an applet like this with the code so I can learn this? I have tried some websites but I get things much more complex then what I am trying to accomplish. Thanks.
Donnie

Sometimes the site you are on can help out :)
Here is a clock applet courtesy of Sun:
import java.awt.Graphics;
import java.util.*;
import java.text.DateFormat;
import java.applet.Applet;
public class Clock extends Applet implements Runnable {
private Thread clockThread = null;
public void start() {
if (clockThread == null) {
clockThread = new Thread(this, "Clock");
clockThread.start();
public void run() {
Thread myThread = Thread.currentThread();
while (clockThread == myThread) {
repaint();
try {
Thread.sleep(1000);
} catch (InterruptedException e){
// the VM doesn't want us to sleep anymore,
// so get back to work
public void paint(Graphics g) {
// get the time and convert it to a date
Calendar cal = Calendar.getInstance();
Date date = cal.getTime();
// format it and display it
DateFormat dateFormatter = DateFormat.getTimeInstance();
g.drawString(dateFormatter.format(date), 5, 10);
// overrides Applet's stop method, not Thread's
public void stop() {
clockThread = null;
Just use the setFont() method in the init() method of the applet to set the sans serif font as such:
setFont(new Font("SansSerif",Font.PLAIN,12);
Hope that helps.
-hankhill

I upgraded to 4.0 and my refresh button is gone.

I am pretty much computer illiterate so I need very detailed instructions on how to get it back. Thanks!

In Firefox 4 by default the Stop, Go and Reload (Refresh) buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

Linkbar and page refresh

Hi,
I have a linkbar in my application and I am using viewstack
as my data provider. If I am in page X and navigate to page Y and
want to go back page X the page X wont refresh. Can someone suggest
me how to work on this.
Thanks
Josh

X won;t refresh,
you mean wont reset its values?
thats because most likely you are setting them after page is
created
viewStack does not recreate its children every time
viestack's view index is changed, it creates them once,(first time
) you need to hook into viewstack;s change event and do refresh
there for particular page

Cache purge and report refresh.

Hi
I have a question when i am trying to do the below.
I am purging the cache and at same time doing the report refresh. Will my report query hit the database or Cache.
Please suggest.
Thanks.

Hi Veer,
My requirment is not to get the query hit the database.
I am doing cache purge and report refresh from DAC.
Cache purge is purging all the queries of yesterdays. And going for report refresh to see todays fresh data after ETL load.
Since these two tasks(purge,refresh) happen in parallel in DAC. I want to confirm whether fresh data is getting into reports are stale data is populating again.
So i asked when purge and refresh happen parellely query is hitting cache or database?
--Thanks.

V$SYSMETRIC_HISTORY and time refresh

Similar Messages

Maybe you are looking for