V_T011 - You are changing a function group which does not belong to you

I've read some posts about my problem I report here, but have not found the solution.
In transaction SE54 -> V_T011 -> Generated Objetcs -> Create / Change I can not save the data transport details dialog for standard recording routine.
The warning "You are changing the function group Which does not belong to you" is shown. The change is not saved.
Can anyone help me?
Thanks

I would like to change the DIALOG DATA TRANSPORT DETAILS:
Actually is configured with the option no,or user, recording routine. I want to save to Standard recording routine.
Thanks,

Similar Messages

Note 123383 You are changing a function group which does not belong to you

Applying note 123383. Got SSCR keys from SAP to modify the identified tables.
When trying to save changes, get error message "You are changing a function group which does not belong to you".
I changed Function Group ownership to myself, but still get error message.
Anyone have an idea how to resolve?

Just in case... did you do the following?
"If, when you are maintaining certain views, the error message DS138 'Changes prohibited by user ... ' or error message EU522 'Changes to ... are prohibited by ... ' is generated, remove the editor lock from programs L0GFNTOP and L0GFPTOP as described in Note 37900."
~Suresh

Function group BUS1001 does not exist

Hi Guys,
I have SAP QIM system which is built on NetWeaver Stack. It pulls all the data from another ECC system.
I am facing an issue while doing F4 on the field of Material. Ideally it should pull all the values there in E60 System but it is giving me an error
"Function group BUS1001 does not exist".
Can someone help me with this?

Hi,
Sometimes the navigation Index for FM/program needs updating. Try this, open the FM and in the menu go to Utilities then 'update Navigation Index'.
Best of luck,
David

Calling a remote enabled function module which does not exist in caller sys

Hi,
I have a a system ABC from which I am trying call a rfc enabled fm(Test) present in system XYZ.
The fm(Test) does not exist in the system ABC so I am getting generation errors and dumps.
Is there a way for me to call these remote enabled function modules which does not exist in the caller system without the obvious errors etc.
Is there any special way.
Thanks

Hi,
please check this sample:
REPORT zcallfm                                 .
DATA: xv_return TYPE sysubrc.
CALL FUNCTION 'DOESNOTEXIST'
DESTINATION   'NOWHERE'
EXPORTING     caller                = sy-sysid
IMPORTING     return                = xv_return
EXCEPTIONS    system_failure        = 1
              communication_failure = 2
              OTHERS                = 4.
It shouldn't throw any generation errors in your system!
Regards,
Klaus

I'm trying an email address i know is mine yet still getting this message:"That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."

I keep getting this message: "That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."
I'm trying to create a new id and e-mail using an e-mail address that is mine and has been mine for over a year - any ideas why this could be happening?

Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums.

When I am trying to sign in to iTunes Store. I am requested to enter a password to the wrong Apple ID mail which does not belong to me... I can't connect to iTunes store and my Viber and Facetime are not active.

My Apple ID was disabled. I reseted it successfully. Afterwards, when I am trying to update the pending apps in App Store on my phone, in order to sign in to iTunes Store I am requested to enter a password to the wrong Apple ID which definitely does not belong to me ('[email protected]'). Of course, I don't know this password and, consequently, I can't connect to Itunes Store on my Iphone. As a result my Viber and Facetime are not active in the meanwhile. What should I do? Thanks in advance for kind help and solution.

Where did you get this iPhone?
Was it new or second hand?
You have to sign out then sign in with the correct Apple ID and password.
Settings > iTunes & App Store > Apple ID: > do it here.

Create a DL group which does not expand to see members in outlook 2010

Hi
I have 2010 exchange server and client side outlook 2010. A special request come from my management, to create a distribution list where the users are restricted not to see who are the members of that group.
Is is possible to restrict the expansion of the this particular DL group?
Thanks
Venky

Sorry, but hiding the membership of a static distribution group isn't possible -- at least not with Exchange.
http://blogs.msdn.com/b/dgoldman/archive/2007/12/14/why-hiding-distribution-memberships-in-exchange-2007-is-not-supported.aspx
You can, however, manipulate the permissions on a group with ADUC:
http://exchangepedia.com/2007/11/how-to-hide-distribution-group-membership.html
However, following that advice may prevent even the owner of the DL from seeing (or managing) the membership of the group.
Which leads to more extensive manipulation (which allows for ADDing members but not for removing them):
http://blogs.technet.com/b/kamleshk/archive/2012/02/01/managing-distribution-groups-with-un-hidden-membership.aspx
Even with all of that, it's still possible (with persistence) to discover the membership -- the address book still shows the groups you're a member of. And let's not forget the use of read receipts. :-)
All in all, the best way to deal with this is to use a dynamic distribution group where there are no static members.
--- Rich Matheisen MCSE&I, Exchange MVP

That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name. - After downloading the latest software for my iPod, I got this message. ?

I began to follow the steps after the "restore" and when I got to the point where I add my email address, this is the message I recieved. I cannot use my iPod now because of this update! help!

Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums.

What do you mean by changing a Function Group in upgradation projects

Hi ABAPers,
I am new to upgradation project will any one help me in understanding the concepts like.
1) what do you mean by changing a Function Group in upgradation projects
2) what is the relation b/w the Maintenance view and function group
3) what happens when we regenerate the table maintenance in se11
4) how can i restore the changes that have done to FG after regenerating
5) Suggest me is there any Tcode or procedure to see the code in Remote system (like how we compare the versions of remote system)
Could you please help me ..
Any relevant docs you can send it to [email protected]
Thanks in advance..

Hello Smriti,
          Exploding a BOM means to display all the components and sub-components for a BOM in a particular transaction (eg) VA01,CO01,ME22N etc..
You can use the SAP FM's depend on the Functionality:
CS_BOM_EXPLOSION               General BOM explosion
CS_BOM_EXPLOSION_EQUI          BOM explosion - initial screen: equipment
CS_BOM_EXPLOSION_MAT           BOM explosion (old version); as of 3.0, use CS_BOM_EXPL_MAT_V2
CS_BOM_EXPL_EQU_V2             BOM explosion for equipment
CS_BOM_EXPL_KND_V1             BOM explosion for material
CS_BOM_EXPL_MAT_V2             BOM explosion for material
CS_BOM_EXPL_PSP_V1
CS_BOM_EXPL_TPL_V1             BOM explosion for functional location
CSS7                           Explode BOM (Document)
CS_BOM_EXPL_DOC_V1             BOM explosion: document sub-assemblies
CS_BOM_EXPL_GNRL2_V1           General BOM explosion: document sub-assemblies
CSSO
CS_SO_MODE_BOM_EXPLOSION
As per Garet in response to your question better talk to the Functional team to get the better underatanding for your requirement.
Check the below link for more details on BOM:
http://sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
Thanks,
Greetson

Getting msg 'Program names L... are reserved for function group includes'

Hi all,
When I try to create a SAP standard Include which start with L, I get the message which says ''Program names L... are reserved for function group includes".
I have already created two standard SAP FMs.
Please let me know how should I go ahead and create the Include.
Thanks and regards,
Anishur

Hi,
When you create the Function group, then if you look at the Fucntion group in SE80, then tehre inlcudes will be created, for FORMS if it will create the includes, and for TOP it will create the include, for L also it will create the Incldue(L referefs coding of subroutines).
So, goto SE80 and activate the Include directly, then you can write the code in that include
Regards
Sudheer

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
Reward if helps

Which function Group a smart form belongs to?

Hello Gurus!!
May i know to which function group does the dynamically generated function module of a smart form belong to?
Thanks in Advance.

You can find out yourself...
1 Go to smartforms...
2 enter your Smartform name..
3 press the test button.. it will take you to the SE37
4 Press display button... select the First Tab... here you will have your function group.
Regards,
Naimesh Patel

Program names L... are reserved for function group includes

Hi All
Im involved in a migration project from GTS to ECC server where i have problem while creating a function group, when am creating a same include LZFR1T00 in ECC server am getting an error *'Program names L... are reserved for function group includes' Please help.
Thanks & Regards,
D. Sandeep.

I'm not sure what GTS is, but I guess you'll need to go to SE80 and create a function group (Z...). SAP will automatically generate the include with the L... name.

Hi i would like to changed my "Forgot your answers? " email id in security question section. please suggest me the way. currently email are going to some email id which is not belong to us.

in our developer.apple account email which given for security question is not belong to us . so we have forgot security question now . when we trying to recover is going to some diffrent email id which is not belong to us.

Alternatives to Reset Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Start here to find your country, and how you can contact Apple:
         Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Support in your country and ask to speak to Account Security.
          Customer Service: Contacting Apple for support.
How to Manage your Apple ID: Manage My Apple ID

Windows 2012 : A domain user who does not belong to the Administrators group can change the passwords

Hello,
Can a domain user
that does not belong to the Administrators group,
be able to change your password ?
I tried to create a domain user account
without administrative access. This user account have
permission to access Windows Server
2012 via Remote Desktop.
I tried to access the same account
to the Active Directory Users and Computers,
i was amazed, because the user account it can changed
the password for multiple accounts,
included one administrator account.
Best regards,
Ricardo

Hi Ricardo,
I agree with Martin, we can check the membership about this user account. Besides, we can refer to following steps to check the memberships:
Start the ADUC on windows 2012.
Right-click the user account and select
Properties, then click the Member Of tab.
Check which group is the user account belongs to.
In addition, i suggest you create a new user account, and check if the new account can change other user’s password.
Best Regards,
Erin

V_T011 - You are changing a function group which does not belong to you

Similar Messages

Maybe you are looking for