V_V2 does not allocate if line can not be completely fulfilled

When we run V_V2 and total demand exceeds available inventory (based on Checking Rule "A-SD Order"), stock is not allocated to any line item unless that line can be completely fulfilled. Why? Can this be changed through any setting:
BEFORE: Available Stock 1200
Order 1 - 200
Order 2 - 400
Order 3 - 700 (nothing allocated)
Order 4 - 100
Order 5 - 300
AFTER: Available Stock - 200
I would think V_V2 would allocate 600 cases to Order 3 and nothing to Order 4 and Order 5 since they are lower in PRIORITY (based on the specified "Sort order".
Thanks for your help!!!
Pat Heffern

Please go through Note 549064 - FAQ: Rescheduling and backorder updating in R/3
thanks
G. Lakshmipathi

Similar Messages

The problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

the problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

WRT54G v5 admin screen does not load completely

I have a WRT54G v5 and when I go to the admin screen (http) it does not load completly. It was working the other day. I was in the process of downloading a newer version of the firmware, I am using 1.0.6 and was looking at the 1.0.9. I have it on the computer but have not applied it to the router yet.
I am using IE7 and was able to view the page previously with IE7 but am not able to now. I have rebooted the router (cold start). No difference. I can still get to the internet and the wireless is working also, I just cannot make any changes to the router.
I need help, if someone is willing.
Thanks
Dave

Check if your firewall is on. I was having the same problem and I just shut down Zone Alarm...

Muse Site does not display completely, amazingly, in Safari. In Chrome, Firefox and IE, however, the site is displayed correctly ...

Muse Site does not display completely, amazingly, in Safari. In Chrome, Firefox and IE, however, the site is displayed correctly ...
Kari

Hi Aish
The site URL is: http://hotelegerkingen.businesscatalyst.com
The page
http://hotelegerkingen.businesscatalyst.com/räume --- preise.html
and
http://hotelegerkingen.businesscatalyst.com/menus.html
not show the whole content (only in Safari)
Thanks for the support!
Regards ,
Kari
H·B·H Communications & Events
Karl Wälle
[email protected]
Breitensteinstrasse 96
8037 Zürich
Fon +41 44 447 40 90 (direct 99)
Mobile +41 79 964 65 12
Fax +41 44 447 40 89
[email protected]
www.hbh-com.ch<http://www.hbh-com.ch>
Am 14.08.14 17:31 schrieb "Aishvarya Raj Rastogi" unter <[email protected]<mailto:[email protected]>>:
Muse Site does not display completely, amazingly, in Safari. In Chrome, Firefox and IE, however, the site is displayed correctly ...
created by Aishvarya Raj Rastogi<https://forums.adobe.com/people/aishvarya+rastogi> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6640545#6640545>

"Execution period does not lie completely within the shift "

Dear Fds,
While operation confirmation when i insert shift, i m getting the warning msg "Execution period does not lie completely within the shift " how to remove this?
Thanks in advance
Nishj

Hi Nishj,
My suggestion is in OPK4, second tab 'Individual entry general', in shift proposal select current shift, so that the system will automatically take the shift and no need of manually giving that. In this case i think you will not face the error.
Have you have already decided to give the shift manually, please check and revert back.
As per my knowledge in operation wise confirmation shift will not be displayed in standard SAP. Please let me know if you are using any exit.
Regards,
Krishna Chandra

AppStore does not load completely

my AppStore does not load completely ipad4 btw.....I tried changing account and Internet connection but still does not work

Hi Jay ,
Try clearing your portal navigation cache , browser cache/cookies and then check .
There is a HTTP Provider cache in visual admin also , try clearing that as well .
Also , did you modify your themes after which this problem occured ?
Regards
Mayank

Dreamweaver does not auto-complete /script tag

Dremaweaver CS5 Version 11.0 Build 4993 - does not close script tag. I type <script> include the text then type </ and the Script tag is NOT closed.
When I type </ the script tag should complete and close automatically.
So, for example:
<script type="text/javascript" language="javascript">
function closeThisWindow() {
window.close();
</
I have to type </script> because it does not auto-complete.
Thanks,
Don.

Good morning all,
Ok, Jon, thank you. I've not used a lot of </ within the scripts that I've written so, so far, that hasn't been a problem for me. Your explanation makes sense though. It also explains why it works if you select the option to: close after typing the opening tag's ">". Because once the opening and closing tags have been populated, entering </ would have no effect on the scripot tag at all.
Very nice response Jon. This behavior is crystal clear now and in fact, it seems to be a feature, not a bug.
Thank you,
Don.

KDE does not load completely

This problem is present since about the release of 4.11 of KDE. Howerver usually 1 reboot is enough, and everything works fine again.
But today i had to restart my system 5x till finally everything is working fine.
The Problem: KDE loads only the network-applet on the systray (kmix and clipper are not visible) and it takes around 10 seconds till i can launch the kickoff-menu. After that i get a warning about my one autostart-programm, which is obviously running, and if i really want to try to run in twice. (Btw, if i choose no, then it is not loaded, which is kind of strange too). I am not able to use the reboot/shutdown option in the kickoff-menu. Dolphin or other apps seems to load fine. Only solution for me so far is to reboot the system.
Here is the output of .xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(565) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
ModemManagerQt "kded" ( 564 ) void ModemManager::ModemManagerPrivate::init() : Error getting device list: "org.freedesktop.DBus.Error.ServiceUnknown" : "The name org.freedesktop.ModemManager was not provided by any .service files"
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.8'
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
kded(564)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18'
kded(564) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 325.15
OpenGL shading language version string: 4.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 325.15
GPU class: GF100
OpenGL version: 4.3
GLSL version: 4.30
X server version: 1.14.3
Linux kernel version: 3.11.6
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
========================> 4 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der FÃÂ¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(631)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f2
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f2
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f2
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f4
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f4
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f4
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f6
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f6
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f6
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f8
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f8
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fa
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fa
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fa
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fc
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fc
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fc
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
plasma-desktop(631) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
N: [pulseaudio] main.c: User-configured server at {1da04571ceeb43369c6b10f2742a25c9}unix:/run/user/1000/pulse/native, which appears to be local. Probing deeper.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
Nepomuk Query Server not available
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl")
ksmserver(613): Couldn't start knotify from knotify4.desktop: "Fehler bei der Ausführung von „knotify4.desktop“. Entweder läuft KLauncher nicht mehr, oder die Anwendung kann nicht gestartet werden."
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
New PolkitAgentListener 0x1200220
Adding new listener PolkitQt1::Agent::Listener(0x145d2e0) for 0x1200220
yakuake(666)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
yakuake(666)/konsole Konsole::Session::run: Attempted to re-run an already running session.
krunner(659)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/tumas/.kde4/share/apps/kabc"
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
akonadi_nepomuk_feeder(711) FeederPluginloader::feederPluginsForMimeType: No feeder for type "text/calendar" found
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
dolphin(802) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
dolphin(802)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kwin(623) KWin::GlxBackend::present:
It seems you are using the nvidia driver without triple buffering
You must export __GL_YIELD="USLEEP" to prevent large CPU overhead on synced swaps
Preferably, enable the TripleBuffer Option in the xorg.conf Device
For this reason, the tearing prevention has been disabled.
See https://bugs.kde.org/show_bug.cgi?id=322060
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kate(814)/kate-filetree KateFileTreePluginView::KateFileTreePluginView: BEGIN: mw: Kate::MainWindow(0x1da8200)
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2146e90,0x0,-1,QObject(0x0) ,"m_root")
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2147550,0x0,-1,QObject(0x0) ,"Unbenannt")
kate(814)/kate-filetree KateFileTreeModel::documentOpened: before add: ProxyItem(0x2147550,0x0,-1,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: empty item
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" ) to ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::documentOpened: after add: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeProxyModel::KateFileTreeProxyModel: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::setListMode: BEGIN
kate(814)/kate-filetree KateFileTreePluginView::setListMode: treeMode
kate(814)/kate-filetree KateFileTreePluginView::setListMode: END
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: change to unnamed item
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: removing ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(-1,-1,0x0,QObject(0x0) ) previous: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree ProxyItem::remChild: remove ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: parent ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:0) grandparentProxyItemDir(0x0)
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: inserting ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: creating a new root
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x25aa840,0x0,-1,QObject(0x0) ,"/home/tumas")
kate(814)/kate-filetree KateFileTreeModel::handleInsert: add ProxyItemDir(0x25aa840,0x0,-1,"/home/tumas", children:0) to m_root
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x25aa840,0x2146e90,0,QObject(0x0) ,"/home/tumas") toProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: attempting to merge some existing roots
kate(814)/kate-filetree KateFileTreeModel::handleInsert: adding ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:0)
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ".xsession-errors" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreePluginSettings::save: save config!
dolphin(802)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
dolphin(802)/konsole Konsole::Session::run: Attempted to re-run an already running session.
PS: The system is only 2 days old and there were no strange updates or any unusual settings/apps installed.
Last edited by tumas (2013-10-27 07:42:44)

Thaodan wrote:Can you write /var/tmp/kdecache-$USER?
What exactly do u mean? There are a few folders/files inside.

Since updating to version 4.0, Firefox does not automatically complete saved passwords

Before updating to version 4.0, whenever I clicked the cursor into the username boxes, the username would automatically be there. Once I clicked on it, then the password would automatically fill in. Since the update, this does not happen anymore. So, I'm having to write usernames & passwords down somewhere and type them in myself. Has this automatic feature been defeated in version 4.0? I still have a list of saved passwords, but it's not calling them up automatically like before.

Do you still see all the names and passwords in the Firefox Password Manager ?
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You can check that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Whats going with itunes store ? after all this updates. win 7 64 bit store does not upload completly and very slow, no nav bar.

I re-installed itunes and by this i mean part by part itunes, quicktime and so on. Once I re-installed it looked like all was going well. I went to the store and upload like it use to before the upadtes. Than I pluged my Ipad2 no problem but I went to store once more the problem started agian the up-load was very slow it didn't up load completly. the nav bar on the store page is missing no apps, music, books,tabs are all gone. I think it has to do with the new itunes upates in the last few days. I also did the firewall and anti virus off step no fix and i'm running Norton 2011. Has itunes put any message on this ? Is it only window 7 64bit with the problem ? Oh one more thing I was getting a 3259 error but that looks like is good now, but it did take me a few days to download one book and one app the download is very slow.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

SUIM RSUSR010 does not return completed list of t-code.

All,
I have a problem using SUIM.
1. running for Transactions -> Executable fro role (RSUSR10)
The result does not match the list of S_TCODE of PFCG. I checked the OSS note and applied 1283691. After that, the result got worse as the result is even less than before.
My system is R/3 enterprinse SAP_BASIS SAPKB62065
If anyone find other useful note and fix the problem, please kindly provide me the right OSS notes.
Many thanks.

Hi Lillian,
the solution for the miracle shall be, that searching for transactions executable with role the result may differ from assigned t-code anhd S_TCODE-values.
RSUSR010 (S_BCE_68002041) lists only transactions, which really can be executed with that role. So not only S_TCODE is necessary, but also the prerequisites for execution (is the TX valid (TSTC), is it locked (SM01), additional authorizations necessary (SE93/TSTCA)) are checked. Especially the last point is oftne a trap. For instance for the t-code QA03 you'll need as per SE93-definition Q_TCODE with TCD = QA03 .
A simple countercheck is to create a test user, assign only that role , log on and try to start the assigned t-codes. If oyu fail, the result of rsusr010 is correct.
b.rgds, Bernhard
EDIT: sorry, my mistake: it is not checked, if the t-code is locked in SM01....
Edited by: Bernhard Hochreiter on Sep 22, 2010 10:54 AM

Elements 9 Slideshow Audio File does not play completely

How do I get an Elements 9 Slideshow to play an entier audio file? Facts: The slideshow duration is greater than the audio file duration. The audio file is an MP3 that fades and terminates prior to the 4:26 duration. No "Trimming" is applied to the audio file.

I'm not sure about this. The tool with which the mp3 has been created is the "Sound Tool" (Tools => Multimedia => Sound Tool) You can also choose for Flash Tool but that is not the one which has been used. There are other pdf readers especially designed for iPad which say that they have a sound tool built in (for the iPad) that should play mp3's. Nevertheless they don''t function as well (so I complained as well, not yet answered) they even don't show the link. The iPad Adobe Reader does show the link, but it does not start. I suppose that they have a built in player as well which is NOT flash. Why otherwise even have the possibility to choose between Flash and a sound tool in Adobe???
By the way talking to Steve is very difficult I think unless you have a direct connection to heaven?

Marshaller.marshal does not create complete XML tree structure

Dear all,
I use JAXB classes to create an XML document with data derived from SQL queries from a database.
I have created a program that instantiates the JAXB classes and sets its values using the automatically created setter functions.
However when I marshal the document the resulting XML document does not contain the inner structure of the elements needed to appear.
It constructs the document from the root node down to the 4th level of child elements.
Only if a run the 'marshal' operation giving as input parameter an inner element (from level 5 and down) I can see the XML structure within its inner structure.
Does anybody have an idea what could be wrong ?

Hi again,
I tested the makedim example package with another of my dimensions and the XML file was updated correctly. When I try to process the dimension I mentioned before (from the admin console this time) an error of type System.OutOfMemoryException is thrown in the step "Create admin cache file". I guess that this error occurs when I run my custom package too but the package run to the end with status "Completed"...
//Anders

Marhal operation does not create complete XML tree structure

Dear all,
I use JAXB classes to create an XML document with data derived from SQL queries from a database.
I have created a program that instantiates the JAXB classes and sets its values using the automatically created setter functions.
However when I marshal the document the resulting XML document does not contain the inner structure of the elements needed to appear.
It constructs the document from the root node down to the 4th level of child elements.
Only if a run the 'marshal' operation giving as input parameter an inner element (from level 5 and down) I can see the XML structure within its inner structure.
Does anybody have an idea what could be wrong ?

Hi again,
I tested the makedim example package with another of my dimensions and the XML file was updated correctly. When I try to process the dimension I mentioned before (from the admin console this time) an error of type System.OutOfMemoryException is thrown in the step "Create admin cache file". I guess that this error occurs when I run my custom package too but the package run to the end with status "Completed"...
//Anders

Optical drive does not work completely.

My optical drive stopped working today. It is not regonized by the system and does not show up in the ATA Bus in System Profiler.
I resetted the PRAM and PMU, then checked and the drive was still not found. I then put my computer to sleep and when I woke it up, the drive was there in the ATA Bus list but information was missing. Now it is not there at all.
There is a disc stuck in the drive. It will not eject. If I restart the computer holding the trackpad button down (to force eject the disc), the system stays on a completely gray screen and never finishes booting.
The disc was having problems being read on another computer, which is why I put it in the drive. I'm not sure why this has happened, but if anyone has any ideas or tips that they can give me, i'd be more than willing to listen to them.
Also, I have an eDrive that I made with TechTool Pro, and when I boot up in that the drive is not recognized either. This makes me think that there is a bad connection or a hardware problem. But how is that possible in a Powerbook?
I do not want to call Apple because I bought my Powerbook two years ago and do not have anymore warranty time left. I can open the machine and look at the drive, but I am guessing that I will not see anything special and it will look normal. I really don't feel like buying another drive, they shouldn't break after two years.
Maybe there is dirt in it or something?
When I open Toast, it freezes and never opens. I have to restart my computer to get Toast to close.
I burned a DVD last night.
Any help would be appreciated. Thanks.

I'm not sure if I'm threadjacking here, which probably means I am, but that is not my intent.
I have seen scattered posts related to this problem and have this problem myself with my 2 1/2 yr old Al PB. Intermittently, the optical drive is not recognized by the system, sometimes with a disc in the drive, sometimes without. System profiler will sometimes list it on the ATA bus, sometimes not. At times it is noted by System Profiler as on the ATA bus, but if I select "disc burning", System profiler either grinds away and never finds anything or says there is no supported device. At one point it froze while playing a DVD and did not recognize the presence of a disc or the drive. A reset of one form or another always corrects the problem (often only after multiple attempts), but this happens several times a week and I shouldn't need to reset PRAM or PMU that often in my opinion. Sometimes just a restart does the trick, but it's all a bit of a pain. No other issues to speak of. Any thoughts? Thanks.
darth

V_V2 does not allocate if line can not be completely fulfilled

Similar Messages

Maybe you are looking for