V04 on EVERY demand selection and naff all excep...

I am stunned! The "Overseas Support" inbetween coughing fits was as much use as a chocolate firegaurd.
To date I have.
1) Rebooted the BT Vision box 4 times .
2) Reset the router twice to default original settings
3) Substituted the direct connection LAN cable from the Box to he Hub.
4) Rebooted the PC, Hub and Box again
and *STILL* the same error message on evry selection.
Try a preview of a film, title says £3.99, try preview and V04.
Repeat until my finger aches from pressing the remote.
It's no wonder Virgin are collecting ex BT unhappy customers in droves.
Recent exchange "Upgrade" has completely FUBARRED the system. Up to that point at least I could get the documentaries on the animals and such like. Since then NOTHING!
Been with BT for aeons, and now, just when you need to use what you've been paying for since Noah released the animals it don't work !
Time to move to Virgin, and fast !

Welcome to the forum we can if you are patient help you get this sorted.
http://bt.custhelp.com/app/answers/detail/a_id/10662/~/error-message%3A-v01,-v03-or-v04
I take it you have tried everything suggested here?
This could be a phone line fault.
Have you spoken to the technical support team rather than just the call centre?
If all else fails : [email protected]
email them with a link to this thread and give them your name and account details and they WILL get it sorted for you.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Similar Messages

ITunes has unselected all of my songs in my Music Library. How do I make iTunes SELECT and CHECK all the songs in my Music Library?

I've just upgraded iTunes and iOS 5.1. Suddenly iTunes has UNSELECTED every song in my music library. When I pick "Select All" from the drop-down menu, all the songs are HIGHLIGHTED, but none of them are CHECKED. I can't manually check every song in my library. How do I get iTunes to SELECT and CHECK songs in my Music Library?

thanks! got it. it's the command key. hold it down while checking one of the boxes and the rest of them will be checked.

How do I select and move all elements on the stage?

I know this is probably easy to someone but I have spent too
much time on it so I give up. Can someone tell me how to select all
the elements in every frame on the stage and simply move it up?
Appreciate any feedback!

Try this: lock the layers you don't want to move. Then click
that little square under your timeline that says "edit multiple
frames". Move the markers at the top of the timeline (looks like
onion skin markers) to your beg & end points that you wish to
move, then choose, SELECT ALL from your pull down menu, you will
now see your desired frames highlighted, and move everything at
once. It's great I've used it several times.
If you would've moved the layer like suggested above it would
only place your items higher in the heirarchy which is not what I
think you were asking. Good luck.

How to select and edit all frames in an animation?

I created a short animation for the first time yesterday, and I ended up drawing a few frames ouside the parameters of the stage. Now I want to adjust the position of the whole composition so that it all fits on the stage. Is there a way, like in photoshop with seperate layers, to select every frame and move them all simultaneously? Thanks.

Hi
try to look under the time line u will find some icons
one of them call
Edit Multiple Frames
rollover them and the name will show up

Select and deselect all in ALV

Hi,
I have created an ALV that has a Check box as the first field as the first field of the row.
Now when I press SELECT ALL nothing gets selected.How can i correct it,
Thnx in advance

Hi chirantan,
1. To get a taste of it,
   just copy paste this program.
2. It will display alv (t001)
and DOUBLE-CLICK ON any row.
   It will TICK ALL THE CHECKBOXES.
(Instead of double-click, u can check for the user-command
of select all button )
3.
REPORT abc.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0.
        INCLUDE STRUCTURE t001.
DATA : flag tyPE c,
       END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
Select Data
SELECT * FROM t001 INTO TABLE itab.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
    i_program_name         = sy-repid
    i_internal_tabname     = 'ITAB'
    i_inclname             = sy-repid
CHANGING
    ct_fieldcat            = alvfc
EXCEPTIONS
    inconsistent_interface = 1
    program_error          = 2
    OTHERS                 = 3.
Display
alvly-box_fieldname = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    it_fieldcat             = alvfc
    i_callback_program      = sy-repid "<-------Important
    i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
    is_layout               = alvly
TABLES
    t_outtab                = itab
EXCEPTIONS
    program_error           = 1
    OTHERS                  = 2.
CALL BACK FORM
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
LOOP AT itab.
    itab-flag = 'X'.
    MODIFY itab.
ENDLOOP.
IMPORTANT.
WHATROW-REFRESH = 'X'.
ENDFORM. "ITAB_user_command
regards,
amit m.

Bulk Select and FOR ALL update not working

Hi
I am trying to run this but it does not work. I get this error
PLS-00430: FORALL iteration variable I is not allowed in this context
declare
cursor c is
select employee_number, national_identifier,
last_name, first_name
from per_all_people_f;
type en_tab is table of per_all_people_f.employee_number%type;
type ni_tab is table of per_all_people_f.national_identifier%type;
type ln_tab is table of per_all_people_f.last_name%type;
type fn_tab is table of per_all_people_f.first_name%type;
en en_tab;
ni ni_tab;
ln ln_tab;
fn fn_tab;
begin
open c;
loop
fetch c bulk collect into en, ni, ln,fn;
forall i in 1..en.count
update xxdl_hr_people_interface
set first_name = fn(i),last_name = ln(i),national_identifier = ni(i)
where employee_number = en(i);
exit when c%notfound;
end loop;
close c;
end;
But if I dont try to update first_name ,last_name, national_identifer at the same time and modify the block to be like this, it runs
declare
cursor c is
select employee_number, national_identifier,
last_name, first_name
from per_all_people_f;
type en_tab is table of per_all_people_f.employee_number%type;
type ni_tab is table of per_all_people_f.national_identifier%type;
type ln_tab is table of per_all_people_f.last_name%type;
type fn_tab is table of per_all_people_f.first_name%type;
en en_tab;
ni ni_tab;
ln ln_tab;
fn fn_tab;
begin
open c;
loop
fetch c bulk collect into en, ni, ln,fn;
forall i in 1..en.count
update xxdl_hr_people_interface
set first_name = fn(i)
where employee_number = en(i);
exit when c%notfound;
end loop;
close c;
end;
Any pointers on why this does not work?
Thank you
Kumar

If per_all_people_f has a PK or unique index on employee_number, then you can do:
UPDATE (SELECT pi.first_name, pi.last_name, pi.national_identifier,
               pf.first_name pffirst, pf.last_name pflast,
               pf.national_identifier pfnat
        FROM xxdl_hr_people_interface pi, per_all_people_f pf
        WHERE pf.employee_number = pi.employee_number)
SET first_name = pffirst,
    last_name = pflast,
    national_identifeir = pfnatIf not, you can do:
UPDATE xxdl_hr_people_interface pi
SET (first_name, last_name, national_identifier) =
            (SELECT first_name, last_name, national_identifier
             FROM per_all_people_f pf
             WHERE pf.employee_number = pi.employee_number)
WHERE EXISTS (SELECT 1
              FROM per_all_people_f pf
              WHERE pf.employee_number = pi.employee_number)Note that if there might be more than one row in per_all_people_f for an employee_id, then you need to modify the select sub-query to add a predicate to make sure it only returns one row for each employee_number.
John

My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
If you still want to restore your computer to factory level...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide PDF

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

HT201528 IDVD version of videos pause momentarily about every ten seconds and diagonal lines are ziggy. Image looks good all the way through the process and even on idvd

I am trying to make a dvd from a video I shot with a Sony HD avchd camera on a new mac mini running mac os x version 10.7.4
I'm using an up to date Imovie but copied IDVD version 7.1.2 and the support libraryt from an up to date macbook. The video is about 40 minutes long. It looks beautiful all the way from teh camera to playing it on idvd, but when I play the dvd on a player or in a computer it stops momentariily about every ten seconds and the picture is ziggy on diagonal lines.
Also, if I try to save the movie as a .mov file there is no audio.
Can't I move idvd to my new computer?

Hi
Why is the picture better all the way to iDVD - then degrades on the DVD
• DVD is as standard - interlaced SD-Video
If You need better then only way is via Blu Ray
• iMovie'08 to 11 - can not deliver this any way known to me to iDVD - first step in the degradation process
Use iMovie HD6 or FinalCut to do this delivery to 100% of what's possibly
Jaggy diagonal lines - mostly due to the use of iMovie'08 to 11 as they only deliver every second line in an already limited quality as interlaced SD-Video - taking away 50% doesn't improve a bit
Jumpy movie -. most often due to feeding iDVD wrong frame rate and forceing it to convert - IT DOES this BADLY. I use JES_Deinterlacer (free on internet) to do this and it does this even better than pay applications.
iDVD can only deliver 25fps (PAL) or 29.97fps (30fps) (NTSC) - so feeding it
• 24 i or p
• 50p or
• 60p
Will not improve at all.
If iMovie'08 to 11 are only option - Then
• DO NOT - Share to iDVD - as this too degrade the final product
• I do - Share to Media Browser - and as - LARGE - Not HD or other resolution as this too degrades quality
More can be said on this - My long note follows - if of interest.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Select all and deselect all in table control

Hi experts,
I want to make the select all and deselect all options in my table control.
But i can't able to do that one. Kindly suggest me how to do that one.
one more thing, if i select some rows in the table control, and press save it should be saved in some other table. how can i implement that one.
Waiting for ur reply.
Regards...
Arun.

Hi Arun,
In the context node that you bind to the table, set the cardinality as 0..n and selection as 0..n. In the UI element Table, set the property selectionMode as 'multi'. Then a toggle button for select/deselect all will appear automatically in your table. You can see it in the top left corner.
For your second question, after selecting the elemets and pressing 'save', in your event handler, do a get_selected_elements( ) on your node. This will return you a set of context elements. Loop through each element and do a get_static_attributes to get the rows. Then you can append these rows to another internal table and bind it to the context. Bind your second table to this node. If the two tables are in different views, the context nodes need to be present in the component controller and mapped to the views.
Hope this helps.
Regards
Nithya

I just installed iTunes on my new computer and transferred all my files, but now every song has a duplicate

Hi everyone. CAn someone help me wiht this problem? I recently bought a new Windows 8 machine and transferred all my music onto the new computer. When I installed iTunes and loaded all of my music, every song title has been duplicated. When you click on the first title, iTunes tells you it can't find the file. The second title will play. Is there some easy way to fix this problem without manually deleting all of the duplicate titles?

First and foremost, learn punctuation and capitalization so we can read what you're writing properly.

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
If you explain why you need to email large numbers of photos, we might be able to offer an alternative.

V04 on *EVERY* demand selection and naff all excep...

Similar Messages

Maybe you are looking for

V04 on EVERY demand selection and naff all excep...