V1.1.1, Previews still show shadows blocking up and posterization
Title says it all. On my system v1.1.1 did not correct this problem.
1Ds Mark II raw files, Quad, 8gb ram, 7800GT video card.
I still can't use Aperture is the previews are not accurate and if the previews don't match what I'll get when the image is moved to Photoshop.
(and yes, Onscreen Proofing is not turned on)
I think I just figured it out.
It's tied into my monitor profile.
I calibrate my monitor with a Gretag MacBeth Eye-one Photo and Eye-one Match v3.6 software. The software is a relatively new update. It added preferences for the monitor profile size. The preferences are "Small (Matrix)" and "Large (LUT)".
I had been using a monitor profile generated with the "Large (LUT)" setting. With this profile I was getting the shadows blocking up and posterizing.
I just tried making a new profile with the "Small (Matrix)" setting and now everything is fine. Images display properly in Aperture.
Clearly, Photoshop is compatible with the Large (LUT) monitor profile but Aperture is not.
Similar Messages
-
I have my text message preview turned off for notification center but text preview still shows anyone know a way to fix this problem
Have you tried a reset. This will not affect your data, it is just like rebooting your computer. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if that will help.
-
I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.
I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223 -
I channged my Appleid at appleid.com and now the phone stills shows my old id and will not let apps that require id/password prompts work.
Just scroll to the bottom of the screen in the store, log out and then login with the new ID.
As long as you changed it from the manage account option at https://appleid.apple.com/ (ie. replaced the primary email address with a new one), then all your old purchases should be fine. -
Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is still empty. I imagine that the backup contains some corruption
Hi cfgolf,
Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
2. Transfer content
Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
6. Set up as new
Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Cheers,
-Joe -
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?
Thanks.Alanf356,
You've reached the right place for help! Once the mobile number is changed, you must activate the new number on your phone. Depending on the model phone you have, you may have to simply reboot your device. If a 3G phone, you may dial *228 (send) and select option number one to activate.
Once completed dial #832 (send) to place a test call and ensure that new number is activated. Let us know if this helps.
EfrainM_VZW
Follow us on Twitter @VZWSupport -
How do I uninstall Mackeeper? I have dragged it into trash, but it still showing in systems information and causing problems!
Please adviseHow to uninstall MacKeeper - updated
How to Remove MacKeeper
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software. -
Uninstalled a program via PowerShell script, but it still shows up in Programs and Features
I wrote a script that uninstalls a program just fine, but it still shows up in Programs and Features due to its entries still existing in the Registry.
Here is a portion of my script:
Start-Process
-FilePath MsiExec
-ArgumentList "/X$($MyProgram.ProdID)",
'/quiet'
-NoNewWindow -Wait
-PassThru
I believe the reason it is still showing up in Programs and Features is because I am missing some MsiExec switch to instruct it to be removed. I vaguely recall dealing with this about two years ago and I wrote a script that did exactly this, but now I completely
forgot what it was.
Can someone help me out here, please?
Thank youI realize that, but honestly don't know where else to submit a question like this in the forums? Also, the vendor is Microsoft. What I am trying to uninstall is any Forefront component, because when I deployed the SCEP client via SCCM 2012 the SCEP client
was not able to uninstall some of the Forefront components.
Here is my script:
$NewLine = "`r`n"
$NewLine
Write-Output "Please wait ..."
#region ---------- Declare WMI Variables to be Used ----------
$CM12R2ClientInstalled = Get-WmiObject -Class Win32_Product |
Where-Object -FilterScript { $_.Name -eq "Configuration Manager Client" -and $_.Version -ge "5.00.7958.1000" }
$FCSInstalled = Get-WmiObject -Class Win32Reg_AddRemovePrograms |
Where-Object -FilterScript { $_.DisplayName -match "Forefront" }
$SCEPInstalled = Get-WmiObject -Class Win32Reg_AddRemovePrograms |
Where-Object -FilterScript { $_.DisplayName -eq "System Center Endpoint Protection" }
#endregion ---------- Declare Variables to be Used ----------
#region --------- Check if the SCCM 2012 R2 Client is Installed ---------
$CM12ClientService = Get-Service -Name CcmExec
If (($CM12R2ClientInstalled -ne $null) -and ($CM12ClientService -ne $null))
$NewLine
Write-Output "The $($CM12R2ClientInstalled.Name) $($CM12R2ClientInstalled.Version) is installed on $($env:COMPUTERNAME)"
#endregion --------- Check if the SCCM 2012 R2 Client is Installed ---------
#region -------- Uninstall any Forefront Component if any are Installed ---------
If ($FCSInstalled)
$NewLine
Write-Output "The following Forefront component(s) are installed on $($env:COMPUTERNAME):"
$NewLine
$FCSInstalled.DisplayName
Foreach ($FCS in $FCSInstalled)
$NewLine
Write-Output "Preparing to uninstall $($FCS.DisplayName)"
$UninstallFCS = Start-Process -FilePath MsiExec -ArgumentList "/X$($FCS.ProdID)", 'REMOVEDATA=1' -NoNewWindow -Wait -PassThru
If ($($UninstallFCS.ExitCode) -eq '0')
$NewLine
Write-Output "$($FCS.DisplayName) uninstalled successfully!"
$NewLine
#endregion -------- Uninstall any Forefront Component if any are Installed ---------
#region --------- Install the SCEP Client if it is Not Installed ----------
If ($SCEPInstalled -eq $null)
$NewLine
Write-Output "The System Center Endpoint Protection client is not installed on $($env:COMPUTERNAME)"
$InstallSCEP = Start-Process -FilePath "C:\Windows\ccmsetup\SCEPInstall.exe" -ArgumentList '/s', '/q', '/NoSigsUpdateAtInitialExp', '/policy "C:\Windows\CCM\EPAMPolicy.xml"' -NoNewWindow -Wait -PassThru
If ($($InstallSCEP.ExitCode) -eq '0')
$NewLine
Write-Output "System Center Endpoint Protection installed successfully!"
$NewLine
Else
$NewLine
Write-Warning -Message "System Center Endpoint Protection failed to install on $($env:COMPUTERNAME) with exit error: $($InstallSCEP.ExitCode)"
$NewLine
#endregion --------- Install the SCEP Client if it is Not Installed ----------
Else
$NewLine
Write-Output "The System Center Endpoint Protection client is already installed on $($env:COMPUTERNAME)!"
$NewLine
Else
$NewLine
Write-Warning -Message "$($FCS.DisplayName) failed to uninstall on $($env:COMPUTERNAME) with exit error: $($UninstallFCS.ExitCode)"
$NewLine
Else
$NewLine
Write-Output "No Forefront components are installed on $($env:COMPUTERNAME)!"
#region ---------- Install the SCEP Client if it is NOT Installed ----------
If ($SCEPInstalled -eq $null)
$NewLine
Write-Output "The System Center Endpoint Protection client is not installed on $($env:COMPUTERNAME)"
$InstallSCEP = Start-Process -FilePath "C:\Windows\ccmsetup\SCEPInstall.exe" -ArgumentList '/s', '/q', '/NoSigsUpdateAtInitialExp', '/policy "C:\Windows\CCM\EPAMPolicy.xml"' -NoNewWindow -Wait -PassThru
If ($($InstallSCEP.ExitCode) -eq '0')
$NewLine
Write-Output "System Center Endpoint Protection installed successfully!"
$NewLine
Else
$NewLine
Write-Warning -Message "System Center Endpoint Protection failed to install on $($env:COMPUTERNAME) with exit error: $($InstallSCEP.ExitCode)"
$NewLine
#endregion --------- Install the SCEP Client if it is Not Installed ----------
Else
$NewLine
Write-Output "The System Center Endpoint Protection client is already installed on $($env:COMPUTERNAME)!"
$NewLine
Else
$NewLine
Write-Output "The System Center Configuration Manager 2012 R2 client is not installed on $($env:COMPUTERNAME)!"
$NewLine -
I don't know what to do. My iPhone 4 just all of a sudden had a blank white screen. It still shows the bar at the top with the signal, time, and battery life. But the rest of the screen is white. If I touch the screen it acts like it's selecting something and gives me the choice to "Copy". It will still charge when I plug it up, but i cannot turn it off or lock the screen. I tried leaving it alone for awhile to see if it will lock on its own, like it normally would, and all it does is dim the screen. I guess im going to try to just let it die, and then see what happens, but if anyone else has any suggestions (other than taking it in to be looked at or getting a new phone) I would greatly appreciate it!
Any number of things could have caused the phone to do this. If after the reset you are experiencing additional problems, the next step in the troubleshooting process is a restore from a backup. Make sure you have one before you start the restore process. If that does not improve things, then you may have to restore as a new device. Remember, restoring as a new device will delete all data off the phone. Make sure all of your pictures are imported to the computer and all other data is synced to supported applications on the computer before restoring as new. See this support document about backups http://support.apple.com/kb/HT4946, and this about restoring the phone. http://support.apple.com/kb/HT1414
-
Please help. My iPod froze up after playing in Alpine car stereo. The screen shows the "Alpine" logo and the message "ok to disconnect" I have tried to connect to my PC with little success. Windows 7 does not recognize the iPod with the error message "device error". I have run the iTunes Diagnostics but it still does not recognize device as "connected"
See my reply to "Transferring Tunes" . Suggestion: From what you said, it sounds like you could easily connect this iPod to a Windows computer. Go back to the computer where you have the 3600 songs. Get the files out of the folder where they reside and put them on the iPod as data (your iPod has to be set up for disc use. So you will then have your music on there as the iTunes music AND the data files. Take that iPod to your Mac. Drag those files from the Finder, where you will see them on your iPod, which will mount like an external disc. (It was set up for disc use). Drag those files to your iTunes Library in the Source List (on the left) in iTunes. You might have to drag them into some interim folder on your harddrive first, like the Music folder within your User.
eMac iPod2G iPodPhoto3G Shuffle Mac OS X (10.4.5) MacPlus,SE30,PB520,PB5300,iMacSE 10.3.9,PBG4 10.3.9 -
Hi,
Ive constantly had problems with mail app since upgrading to mountaion lion. 8/10 time i have to force quit mail but thats not the main problem. I have been trying to delete all my mailboxes however the "Delete Mailbox" option is always greyed out therefore I went to system preferences>Mail,Contacts..., then selected the accounts and clicked " - " and deleted the accounts successfully.
Weird thing is that the mailboxes still show in mail app. I have no accounts showing in preferences as i have deleted everything but when i open mail app, everything is still there.
Anyone have an idea, what is going here? Wish it could be like windows, just uninstall and install the app again -_-
Thanks in advance!I found this link for a similar problem someone had with a Lotus Notes account. I used it to resolve my issue with a different email account (basically followed the same steps, and then looked for the particular account I needed to delete)... hope it helps!
http://aumja24-usa.blogspot.com/2010/10/iphone-removing-lotus-notes-traveler.htm l -
I Changed my apple ID two days ago and verified it threw my email. When I try to download an app it still shows my old apple is and won't let me download. am I doing something wrong?
OK, so did you change to the new ID on your device in:
Settings>iTunes & App Store
Settings>iCloud (if you did not delete the old iCloud account before you changed your Apple ID, then post back for instructions on how to delete it)
Settings>Messages>Send & Receive
Settings>FaceTime
You need to sign out the old Apple ID in all of these places and sign on the new one.
Cheers,
GB -
I changed my apple ID and got verified but my IPAD still has the old username and won't let me sign in. Can anyone help ?
you have to go into Settings > Store > Apple ID: (your old ID should be there) Click on the old ID. Sign out. Then Sign in with your new ID.
-
Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.
Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.
Maybe you are looking for
-
Gmail labels and hierarchical folders in Mail app
I may have missed discussion on this, so please point me to the thread where this is mentioned. Something I just noticed is that labels I create in Gmail (from the Web interface) that have slashes in their names are interpreted in the iPhone/iPod 3.0
-
Resource Adapter Deployment Error (Resolved)
This Problem Has Been Resolved. I'm trying to develop an application using Inbound resource adapters on Weblogic 9.2.1 . I have the resource adapter and the MDB packaged separately. The MDB appears to deploy successfully, but the resource adapter doe
-
Function module/BAPI for ATP Material
Hi All, Is there any function module/BAPI for ATP(Available-to-Promise check) for Material. 1) Production order from one plant 2) Scheduling agreement from another plant. Regards, Srinivas.
-
I have a subscription, yet when I attempt to convert PDF to Word I am asked to buy a subscription.
I have a subscription. Yet, when i attempt to convert PDF to Word, I am asked to buy a subscription. What explains this?
-
If I will upgrade to this firmware the wre54g v1 will be able to work also with routers of third parts? because with my actual firmware 1.05.08 , the wre54g doesn't work (I have configured it with manual settings) sorry for the english bye