V10.6.8 Snow leopard won't update

Snow Leopard won't update, no matter how many times I try. I suspect Flashback is the reason. How can I scan and remove it? Complete Mac novice. Any assistance is appreciated!!!

I doubt that very much. I'd also be sure to do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

IMac 27' (year 2010 - Snow Leopard) won't boot - white screen only

Hi,
my 2010 iMac 27in running Snow Leopard won't start - when I switch it on, I can hear the chime, the screen goes white and gets stuck at this (no Apple logo, no question mark, no mouse pointer). I have waited for minutes but it's definitely stuck.
When there is a DVD in (tried both OSX Instal and Apps Instal), I can hear the drive reading for a few seconds, then it goes silent.
I have found a few similar topics in this and other forums - the issue was solved or helped by entering one of the special boot modes via keyboard shortcuts upon startup. In my case though, none of these shortcuts work - with the sole exception of Cmd+Alt+P+R to reset the NVRAM. What I tried was: C, D, Alt, Eject, N, T, Shift, Cmd-V, Cmd-S ...none of them has any effect.
I learned there are some issues with a wireless keyboard when using these shortcuts, so I got a USB one to rule that out - but it didn't help.
In the beginning, I heard "clicking" noise I am not used to hearing - so I suspect a HDD failure but it would surprise me the machine would not indicate that in some better way than a blank white screen. The clicking then went away - could be after I did the NVRAM reset - not sure.
I also performed an SMC reset by unplugging the power cord for a while - no effect.
As per one recommendation, I tried NVRAM reset a few times in a row. Didn't help but, interestingly, I found that after 3 such resets, holding D will eject the DVD (without the 3 resets, "D" won't do it). Prior to that I had no way of getting the DVD out.
The computer was running fine before I switched it off for the night on the previous day. There was no system update, no change I am aware of.
The only thing beyond default is extra RAM but that has been there for months now without problems (and just to be super sure, I removed the modules but no effect).
At this point I have run out of ideas - any suggestions are very welcome.

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Running "Classic Application" in Mac OS X v10.6.2 Snow Leopard

Hello, I'm trying to run a Classic Application on Mac OS X v10.6.2 Snow Leopard... goes by the name of "Titanic Adventure Out of Time." When I go to install it I get the message "You can't open the application Titanic because the Classic environment is no longer supported." I'm wondering how I will be able to get this to work on my MacBook. I've read a few sites which talk of some sort of emulator, or mounting it with Roxio Toast? Is this correct?

Believe it or not you may have an easier time running that program in Windows on your Mac! That game was made for Windows, and there is better old Windows support for Intel Macs than there is Mac OS 9 support. See my FAQ*:
http://www.macmaps.com/macosxnative.html#WINTEL
And see http://www.macmaps.com/macgamepages.html
to see if there are any patches to make it Mac OS X Intel compatible.
- * Links to my pages may give me compensation.

Snow leopard won't boot, but windows bootcamp does.

My mac has a partitioned hardrive. I have xp on one side and snow leopard on the other. Starting yesterday, snow leopard won't boot. I ran the apple hardware test and came up with these 2 codes: 4MOT/4/40000003:HDD-1347 and -1352. The mac still runs properly though if started with xp.

That error is the HDD cooling fan I believe.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, or are running 10.7+, at least try it from the Safe Boot part onward.
Re-install if that doesn't work.

Hi, Hi, Hi I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard. The updated the combo update. Now stuck on blue screen at start-up. Need help. Greatly appreciated. Thank you.

Hi,
I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard.
Then updated the combo update. Now stuck on blue screen at start-up.
Need help. Greatly appreciated. Thank you.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Macbook Pro V10.6.6 Snow Leopard

I have a Macbook Pro V10.6.6 Snow Leopard. It looks like the OS crashed and it's not booting anymore. It's getting stuck at grey screen. I tried lot of things (could not boot in safe mode, Disk Utility do not show upon boot, Internet Recovery is failing with -2000F error, ...). It looks like i will have to reinstall the OS. However, I do not have the CD the came with the Macbook. Where can I download it from?

10.6 isn't available as a download.
If you've lost the Snow Leopard DVD you can buy it again at the Apple Store.

You tube video's are suddenly downloading as Quicktime movies instead of FLV's. Does anyone know what causes this and how to fix it? Quicktime won't play the files. I use safari and snow leopard and all updates are installed. JulieS

Is anyone else having this problem and how to fix it?

There are no preferences for Quicktime 10, only for QT 7.
Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)
For anything like Flash videos you should use QT 7.

Cloned HD running Snow Leopard won't boot in new MBP running Lion., cloned HD running Snow Leopard won't boot in new MBP running Lion.

Hi, I've seen a lot of discussion on this topic but nothing specific to my situation. I have two macs, a personal mac (macbook running Snow Leopard vers. 10.6) and a newer work macbook pro (late 2011 running Lion vers. 10.7.5). I want to use some of the applications at work (that is on the Macbook Pro) that are on my home macbook with Snow Leopard. I cloned the entire HD of my Macbook onto an external drive. The clone seems to have worked as I can use it as a boot disk for the macbook (from which it was cloned). However, if I try to boot the MacBook Pro running Lion, with this same clone on the external drive it won't work. I get a bit of text in the background and an overlay in dark grey saying (in several languages) restart the Mac by holding down the start key etc. I don't know if this has to do with the kernel panic problem or the Lion restore disk business. I don't see the point in trying to do an internal partition of the MacBook Pro hard drive and then add the cloned Snow Leopard, if I can't get the thing to boot externally as it is.
Does anyone have any fixes for what really should be a simple proceedure but is not?

Make sure the mac you are cloning from has the combo 10.6.8 update applied to it. The late 2011 models need at least 10.6.7 and better with 10.6.8. So if your older mac is running anything lower than 10.6.7 it will not boot on the 2011 model.

Tryng to down load snow leopard asking for update password dont remember

trying to down load snow leopaed and it is asking for my update password ,dont no password

Snow Leopard can't be downloaded from the net.
You can purchase Snow Leopard v10.6 > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
Make sure your Mac meets Snow Leopard's requirements here.

My Address Book on Snow Leopard won't Search!

When I type something in on the search field on my address book in Snow Leopard, it won't filter out the search, meaning that nothing new will show up. It will act as if I didn't type anything into the search field at all since nothing changes. I already tried uninstalling the Address Book and reinstalling it from the Snow Leopard DVD but that didn't fix the problem. Any advice?

I just had this same problem. I use multiple mac computers that I sync manually because of a previous idisk issue. I noticed as I updated my cloud, the search function in address book quit working properly on each computer.
So created a new group list and I attempted to copy "All Contacts" into that group. It would not copy all my contacts into that group in one paste function. So I took all the the first 25 names and copied them. That worked. Then I moved to the next 26-50 names and so on. I noticed when I got to the fourth group of copying contacts that it did not paste and froze the application.
I quit address book, reopened it. All the contacts before the the fourth group were in the file. The search function worked on those names. I then went card by card and found one that had a "string" of data listed where an email address should I have been. So I deleted the corrupt card and now my address book search is working again.
Here is the short solve. Look for a corrupt card in your address book. I found the corrupt card by trying to copy it over to a new address group. The card that was corrupt just happened to be one that I had updated in the last week or so...
Hope this helps.

Snow Leopard won't print graphics in Word 2008

When I updated to Snow Leopard and Office 2008, everything seemed to work perfectly, open, and run well. However, my .doc files previously created in Office X that include graphics from the draw program will print ONLY text and text boxes--no graphics. I get the same in compatibility mode (.doc), when I "save as" to DocX format, and when I try to save as a PDF--text floating in a sea of non-graphic white. I sent the file to my husband's computer running Leopard, and it prints perfectly. Similarly, if I open Word 2008 and create a fresh, native docx file with graphics, those graphics DO print. So this seems to be a Snow Leopard problem with compatibility Word files using graphic elements (nothing fancy--just flow chart stuff.) Any ideas anyone? I am a small educational publisher and do NOT relish the thought of redoing a boatload of work in another program. Help!

As near as I can tell, the printer is not the problem. I have tried three different printers, all with the most up-to-date drivers, and even tried Adobe Acrobat 9 Pro, which should bypass all of the above. The graphic elements that worked perfectly in my previous system simply disappear in Snow Leopard. My workaround is to send them to an "older" Mac NOT running Snow Leopard, then convert them to PDF files, then print from Snow Leopard, and all is well. Absolutely frosted! I have publishing deadlines to meet!

MacBook Pro screen flickers and freezes after Snow Leopard/Safari 5 updates

Hi guys,
I have a silver 120GB 15-inch MacBook Pro from Summer 2007 with 3GB RAM and 25+GB free space which has recently begun to freeze irrecoverably. The first appearance of these symptoms seems to coincide with my installing the Snow Leopard 10.6.6 update via Software Update.
I'm not particularly well versed in computer technology, but will try to describe my problem as detailedly as possible.
What happens is this:
1. I start the computer as per usual, with only a couple of startup items. Everything's fine.
2. I start working. Use a lot of Safari 5 for browsing websites, often with some kind of Flash or "Flash-type" content such as banner ads, videos, even full Flash designs. I may also have programs such as QuickTime, VLC or an image editor open, if not necessarily "actively" doing anything. Everything's still fine - I'm able to both browse websites and watch videos as usual.
3. After a while of active working - say, 1-3 hours - I notice browsing websites gets a little choppy. Display features such as the file list view in Finder may or may not appear properly. The rotating wait cursor may or may not appear from time to time.
4. Immediately after symptom no. 3, the next time I start to watch a video, either via Safari 5 (say for example something on DailyMotion.com) or a file via QuickTime, something goes wrong.
Following no. 4, one of three things invariably happen:
5a) The video freezes and the entire screen flickers from black to the screen view very quickly two or three times, after which the computer or screen appears to freeze. The cursor still moves, but nothing reacts to it - open windows become completely unresponsive, nor does the top or any other menu react in any way to clicking. The "menu row" of application items, which normally appears when I move the cursor to the very bottom of the screen, doesn't appear. Restarting "blindly" by pressing the Off-button once and pressing R doesn't work. I'm forced to do a hard reboot, after which the computer is once again fine until the next two hours of active working. This usually happens ONLY when I try to watch a video in Full Screen-mode.
5b) I notice the video freezing only just in time, and am able to pause it and "esc" out of Full Screen-mode, and the computer remains operational. However, as soon as I again try to play video in Full Screen-mode, everything described in 5a. happens.
5c) The video stops playing, and the screen reverts momentarily to pale blue before switching to the login screen. I login again with my details, and everything appears to be fine again until the next two hours of active working. The computer "starts up" a lot faster than with a hard reboot. This usually happens ONLY when I've tried to watch a video in its original size, i.e. when not in Full Screen-mode.
This happens 1-4 times a day, and it appears to depend directly on how much work I've been doing on the computer. The less I use it in the course of a day, the longer it takes until the next time it freezes.
So, in a way, I'm able to replicate this problem. 95% of the time the screen has frozen while watching or starting to watch (usually already when starting to watch) video footage, but it has also frozen a couple of times just switching between e.g. Safari 5 and an image editor or browsing a website with a Flash banner ad or embedded video content (which however hasn't necessarily been playing); today, the screen froze when I tried to open a website made entirely with Flash.
Although it could be just a coincidence, I believe this issue first appeared when I updated Snow Leopard to 10.6.6 via Software Update alongside some other pending updates, including as far as I recall one for Safari 5. The update process appeared to have gone well at the time, though, and was not interrupted in any way. I have never had this specific problem with the computer/screen before, though.
I've read a couple of threads here regarding very similar issues with newer MBP models than mine, in which it has been suggested that the fault may lie in a malfunctioning NVIDIA GeForce graphics card. Now I've had that replaced already once because my screen went unexpectedly completely blank after a forced reboot 1-2 years ago (I don't remember exactly), but according to my System Profiler info the card still a GeForce 8600M GT. Can it be failing again?
I've also had some kind of a RAM card failure once. As far as I understood it, one of the RAM cards had fried and was preventing the computer from starting up. I replaced the bad 1GB card with a new 2GB one and the problem was resolved. Before the computer died, there were also other symptoms, but they were not similar to these.
I'm also doing the Apple Hardware Test tomorrow. Any other suggestions, though, than the graphics card?
*Could this have to do with Flash or Safari 5?* Just hear me out. Even though my computer has frozen from watching a video in just QuickTime, Safari 5 has always been open in the background at the same time, and more likely than not with websites with "Flash" content open. And come to think of it, before I performed the Snow Leopard and Safari 5 updates, I used to have daily problems viewing Flash video in Safari 5, the video content either suddenly showing up as "Plug-in Failure" or crashing the browser; I've had both Safari 5 and the Safari 5 Flash plug-in "quit unexpectedly" countless times in the past, almost daily. Sometimes the "Plug-in Failure" could be fixed just by refreshing the browser view; at other times, Safari 5 would stop showing Flash content altogether - Flash banner ads (such as Google ads), YouTube and other Flash videos, everything - until I quit and restarted Safari 5. BUT - since the day I updated everything via Software Update, I don't remember this happening; it never gets to "Plug-in Failure" now. Could it be worth trying to use e.g. just Firefox for a while or is there something (e.g. Adobe Flash) that I could try reinstall? Or am I just clutching at straws here?
Thanks for reading this long, long post!

Do you have access to an Apple Store? If so, it may be worth making an appointment at the genius bar and having them run the test for the NVIDIA problem. Since your replacement logic board still has the NVIDIA GeForce 8600 M GT video chip, it could be starting to happen to your replacement logic board.
I also agree with all of CMCSK's suggestions. Freezing is often associated with hard drive problems. You might also want to run SMART Utility:
http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
You can download the demo and run it several times for free. It will give you a very comprehensive view of the physical health of your hard drive. If you still have the original one from 2007, it's getting pretty long in the tooth and may be approaching the end of its average useful life of 3-5 years. I just recently had to replace my original 2007 Fujitsu drive.
If your drive is headed south, and is also too small, it may be time to upgrade to a larger and faster drive.
The software update probably didn't cause the problems, but it may have exposed problems that were already in existence.
Good luck!

Mac book pro is stuck on installing snow leopard. won't work.

i recently was mucking around with my mac book pro and soon found my self stcuk with the installation of the 'snow leopard mac OS X' no matter what i did it just wouldn't go away, all i wanted was for my laptop to just go back to normal and get back to what i had been doing only a few hours ago but nope nothing, not even the snow leopard would download to finish things off. so i contacted apple support whom we spent about an hour chatting with. that was basically hopeless, they were very nice but they just didn't know what they were doing, and best of all they wanted to charge me. so at the very ending when they told me that my hard drive was fried and there was absolutely nothing i could do but to get it taken to an apple store and pay for them to replace my hard drive i asked them if i should do the online repair thing, and he told me no i shouldn't its just a waste of time and it won't work. so i neglected him told him a thank you and guess what, i got it to work. now my laptop is good as new and i didn't need to pay to get the hard drive replaced. lol. ok so for the people who are facing this oh my gosh its such a headache but we can do thins. so write these steps down and i promise they will work and you don't need to pay to get your perfectly fine hard drive replaced. ok so shut down your laptop completely. then when its completely off. hold don't the command button and R hold them both down and then at the same time press the on button keep holding them, you can take your finger off the on button but keep the others on the command and R until a white screen appears it will ask for wifi and then it will reset everything for you like when you first got your laptop. just follow through the instructions they give you and all is well. i hope this was help full for you if this happens.! (btw i can't remember if it was command and R or the option, alt button and R but just try the command one first and if that doesn't work then the other one)

Hello roscomom,
The following article details a number of steps that may be helpful in getting your TV working with your MacBook Pro again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

V10.6.8 Snow leopard won't update

Similar Messages

Maybe you are looking for