V120 server scrolls message when rebooting

I have just obtained a V120 server and installed Solaris 10 3/05 (should probabaly have installed a later version, but it was the only one I had in my possession at the time....I am downloading the latest version today...) on it and patched it up with the latest 10_Recommended cluster. I also installed 2 kingston sync 133 1GB memory sticks in it instead of the Sun 512 MB sticks that were in it before installing the O/S....
I noticed that when I was installing the O/S, when it rebooted, it came up with a scrolling message (which I will try and insert a jpg of at the end of this msg. Every time after that, when I would do a reboot, init 6, or anything that would restart the box, it would just start scrolling the message. If I would poweroff and poweron in the LOM, it would start fine or if I would init 5 and power back on, no problem....only when rebooting.....
Anyway, I replaced the Kingston memory with the Sun memory that came with it and it works just fine.....
I guess I have to stick with Sun memory, huh? Or is there a work-around for the non-Sun memory that I can try?
Thanx .....
Now, here is (hopefully) the error message....
PSTATE=0000000000000414 TBA=00000000f0f00000 DCU Control=000000000000000f
AFSR=0000000000000000 AFAR=ffffffffb459fff8 PIL=000000000000000f
I-SFSR=0000000000000000 D-SFSR=0000000000000000 D-SFAR=00000000ff380004
TL=0001 TT=0068 TPC=00000000f0f0b658 TNPC=00000000f0f0b65c
h
Had to copy and paste text, so formatting is a little funny.
PSTATE TBA and DCU Control are on one line.
AFSR AFAR and PIL are on the next.
TL TT TPC and TNPC are on the last....
The same message just keeps scrolling until I poweroff.
I will probably just end up getting some more SUN RAM, but it would be good to know if there is a simple work-around....thanx,
Allan Dayton
SCSA, SCNA
[email protected]

Allan,
Though that platform uses PC133 RAM, your Kingston DIMMs may just not be compatible.
The systemboard of the V120 requires ECC RAM be used, and not all PC133 sticks are ECC.
Most RAM vendors have a compatibility tool on their web sites. Kingston Technology does as well (www.kingston.com). Please consider using it to reference their part number to compatibility with that computer model.
That would eliminate that as a contributing factor to the errors you observed.

Similar Messages

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

I keep getting Server Busy Messages when opening CC programs

Ever since the latest iteration, I've been getting Server Busy messages when opening programs in the CC. They can be gotten around, but are annoying. Is this a new bug?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some of the steps such as changing browser and turning off your firewall for downloads

TS3899 Connection to server failed message when I try to get my emails?

When I try to get my mail I repeatedly receive a "connection to server failed" message", any ideas what to do to resolve this issue?

They are two different things. Your mailer server coul be down. Try again later.

Sun v880 server thrown messages during reboot

he server is connected with three application server works as v480 also shown the same error, in the last error messsage we are geting ar 5 17:37:50 gtcerp1 scsi: [ID 107833 kern.notice]      Requested Block: 677 Error Block: 677
Mar 5 17:37:50 gtcerp1 scsi: [ID 107833 kern.notice]      Vendor: HP Serial Number: 9 $DR-1
Mar 5 17:37:50 gtcerp1 scsi: [ID 107833 kern.notice]      Sense Key: Media Error
Mar 5 17:37:50 gtcerp1 scsi: [ID 107833 kern.notice]      ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU:
presently system is running fne, no console message, but why this throw so many messages during reboot.
Mar 4 07:42:24 gtcerp1 tictimed[1224]: [ID 423602 user.error] [tictimed]: stopping on SIGTERM or SIGPWR.
Mar 4 07:42:24 gtcerp1 tictimed[1224]: [ID 423602 user.error] [tictimed]: stopping on SIGTERM or SIGPWR.
Mar 4 07:42:34 gtcerp1 syslogd: going down on signal 15
Mar 4 07:44:13 gtcerp1 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.9 Version Generic_118558-03 64-bit
Mar 4 07:44:24 gtcerp1 luxadm[64]: [ID 972850 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/devices/pci@9,700000/SUNW,qlc@3/fp@0,0:fc::216000c0ff07a6ca) in file: /etc/cfg/fp/fabric_WWN_map.old. I/O error
Mar 4 07:44:24 gtcerp1 luxadm[64]: [ID 650835 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/devices/pci@9,700000/SUNW,qlc@3/fp@0,0:fc::256000c0ffc7a6ca) in file: /etc/cfg/fp/fabric_WWN_map.old. I/O error
Mar 4 07:44:13 gtcerp1 genunix: [ID 943905 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Mar 4 07:44:24 gtcerp1 luxadm[64]: [ID 733177 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/devices/pci@9,700000/SUNW,qlc@4/fp@0,0:fc::226000c0ffa7a6ca) in file: /etc/cfg/fp/fabric_WWN_map.old. I/O error
Mar 4 07:44:13 gtcerp1 Use is subject to license terms.
Mar 4 10:37:22 gtcerp1 luxadm[64]: [ID 972850 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/devices/pci@9,700000/SUNW,qlc@3/fp@0,0:fc::216000c0ff07a6ca) in file: /etc/cfg/fp/fabric_WWN_map.old. I/O error
Mar 4 07:44:13 gtcerp1 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:4d:d0:98
Mar 4 10:37:22 gtcerp1 luxadm[64]: [ID 650835 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/devices/pci@9,700000/SUNW,qlc@3/fp@0,0:fc::256000c0ffc7a6ca) in file: /etc/cfg/fp/fabric_WWN_map.old. I/O error
Mar 4 07:44:13 gtcerp1 unix: [ID 389951 kern.info] mem = 16777216K (0x400000000)
Mar 4 10:37:22 gtcerp1 luxadm[64]: [ID 733177 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/devices/pci@9,700000/SUNW,qlc@4/fp@0,0:fc::226000c0ffa7a6ca) in file: /etc/cfg/fp/fabric_WWN_map.old. I/O error
Mar 4 07:44:13 gtcerp1 unix: [ID 930857 kern.info] avail mem = 16490520576
Mar 4 07:44:13 gtcerp1 rootnex: [ID 466748 kern.info] root nexus = Sun Fire 880
Mar 4 07:44:13 gtcerp1 mpxio: [ID 181378 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities enabled.
Mar 4 07:44:13 gtcerp1 rootnex: [ID 349649 kern.info] scsi_vhci0 at root
Mar 4 07:44:13 gtcerp1 genunix: [ID 936769 kern.info] scsi_vhci0 is /scsi_vhci
Mar 4 07:44:13 gtcerp1 rootnex: [ID 349649 kern.info] pcisch0 at root: SAFARI 0x8 0x700000
Mar 4 07:44:13 gtcerp1 genunix: [ID 936769 kern.info] pcisch0 is /pci@8,700000
Mar 4 07:44:13 gtcerp1 rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x8 0x600000
Mar 4 07:44:13 gtcerp1 genunix: [ID 936769 kern.info] pcisch1 is /pci@8,600000
Mar 4 07:44:13 gtcerp1 rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x9 0x700000
Mar 4 07:44:13 gtcerp1 genunix: [ID 936769 kern.info] pcisch2 is /pci@9,700000
Mar 4 07:44:13 gtcerp1 rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x9 0x600000
Mar 4 07:44:13 gtcerp1 genunix: [ID 936769 kern.info] pcisch3 is /pci@9,600000
Mar 4 07:44:13 gtcerp1 qlc: [ID 171021 kern.info] Qlogic FCA Driver v20040825-1.40 (0)
Mar 4 07:44:13 gtcerp1 qlc: [ID 637753 kern.info] NOTICE: qlc(0): Firmware version 2.1.140
Mar 4 07:44:14 gtcerp1 qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(0): Loop ONLINE
Mar 4 07:44:14 gtcerp1 pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc@2, qlc0
Mar 4 07:44:14 gtcerp1 genunix: [ID 936769 kern.info] qlc0 is /pci@8,600000/SUNW,qlc@2
Mar 4 07:44:14 gtcerp1 qlc: [ID 171021 kern.info] Qlogic FCA Driver v20040825-1.40 (1)
Mar 4 07:44:14 gtcerp1 qlc: [ID 637753 kern.info] NOTICE: qlc(1): Firmware version 3.2.110
Mar 4 07:44:14 gtcerp1 qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE
Mar 4 07:44:14 gtcerp1 pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc@3, qlc1
Mar 4 07:44:14 gtcerp1 genunix: [ID 936769 kern.info] qlc1 is /pci@9,700000/SUNW,qlc@3
Mar 4 07:44:14 gtcerp1 qlc: [ID 171021 kern.info] Qlogic FCA Driver v20040825-1.40 (2)
Mar 4 07:44:14 gtcerp1 qlc: [ID 637753 kern.info] NOTICE: qlc(2): Firmware version 3.2.110
Mar 4 07:44:14 gtcerp1 qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(2): Loop OFFLINE
Mar 4 07:44:14 gtcerp1 pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc@4, qlc2
Mar 4 07:44:14 gtcerp1 genunix: [ID 936769 kern.info] qlc2 is /pci@9,700000/SUNW,qlc@4
Mar 4 07:44:14 gtcerp1 genunix: [ID 936769 kern.info] fp0 is /pci@8,600000/SUNW,qlc@2/fp@0,0
Mar 4 07:44:14 gtcerp1 genunix: [ID 936769 kern.info] fp1 is /pci@9,700000/SUNW,qlc@3/fp@0,0
Mar 4 07:44:14 gtcerp1 genunix: [ID 936769 kern.info] fp2 is /pci@9,700000/SUNW,qlc@4/fp@0,0
Mar 4 07:44:14 gtcerp1 qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(2): Loop ONLINE
Mar 4 07:44:15 gtcerp1 scsi: [ID 799468 kern.info] ssd1 at fp0: name w2100000c507a995e,0, bus address e8
Mar 4 07:44:15 gtcerp1 genunix: [ID 936769 kern.info] ssd1 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c507a995e,0
Mar 4 07:44:15 gtcerp1 scsi: [ID 799468 kern.info] ssd0 at fp0: name w210000008715a66e,0, bus address ef
Mar 4 07:44:15 gtcerp1 genunix: [ID 936769 kern.info] ssd0 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w210000008715a66e,0
Mar 4 07:44:15 gtcerp1 scsi: [ID 799468 kern.info] ssd22 at fp0: name w2100000c5080e94e,0, bus address e4
Mar 4 07:44:15 gtcerp1 genunix: [ID 936769 kern.info] ssd22 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c5080e94e,0
Mar 4 07:44:15 gtcerp1 scsi: [ID 799468 kern.info] ssd33 at scsi_vhci0: name g600c0ff00000000007a6ca587d8cff00, bus address g600c0ff00000000007a6ca587d8cff00
Mar 4 07:44:15 gtcerp1 genunix: [ID 936769 kern.info] ssd33 is /scsi_vhci/ssd@g600c0ff00000000007a6ca587d8cff00.

Errors?
I don't see anything that a good call to Oracle Technical Support can't fix.
Go use your service contract and open a Support Request (SR).
Else wipe the system and resinstsall everything fresh.
While you are at it, you should patch your Solaris 9 system with the newest full bundle you can get.
SunOS Release 5.9 Version Generic_118558-03That system is about a decade under-patched.
That suggests a deliberate lack of continual maintenance.

Server error message when i sign into windows live messenger

hey everyone, i hope someone can help me. ive got a bit of a problem. when i sign into windows live on my blackberry it comes up with an server error message and signs me back out again. ive tried deleting windows live off and re-installing it. i dont know what to do now? i also receive emails to my blackberry off the same address, is this the reason why hope someone can help me!

Ok here is the message.
You don't have permission to access "http://discussions.apple.com/edit-profile-avatar!input.jspa?" on this server.
Reference #18.c53c4317.1408508622.122a3199
The reference number will vary when I refresh the page.

Lightroom 1.1 Server timeout message when uploading a web page

I just updated to LTR 1.1 and now I'm sitting here looking at an error message for most of the day when ever I want to make a Web Page in LTR.
It tells me the Server is not responding and It's timing out.
I called my ISP and Server both are okay. What can I do or, who can I call to make things work a little ?

Duane,
This looks like the URL has the content of a wiki page as an attachment to the URL which is blowing up the get request. Can you go to the earlier version - the history should allow you to backtrack changes - if you access this earlier version and change something small - does it save OK. If so then maybe the change you made is the problem.
I cannot access the workspace without being given explicit access so this is a guess.
Phil

Ical server error message when accessed remotely

hello we have a 10.6.7 ical server running mostly smoothly when accessed from the LAN.
however, when accessed remotely it generates the following error message:
The server responded with “HTTP/1.1 501 Not Implemented” to operation CalDAVAccountRefreshQueueableOperation.
the message provides the following 2 responses / buttons: stay offline or go online - trouble is once you click go online, it comes up with the same message again.
unfortunately, research the error message has so far not produced any promising results, thus any ideas would be much appreciated.

There are many reports here on this site about this, crossing different carriers and regions of the world. Consequently, the only deduction that can be made is that this is a system-level issue rather than a single user issue. Hence, what each affected user must do is contact their mobile service provider for formal support and possible escalation up to BlackBerry.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Server name message when triggering process chain through ABAP PROGRAM

Hi all,
When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated.
Thanks,
Uday.

Hi Shanthi,
How to write exception handling for this.
Quick reply is nedeed.
Thanks,
Uday.

Get 500 Internal Server Error message when attempting to open Firefox.

Firefox working fine until last week. Cannot connect. Only receive error message. Uninstalled & re-installed. Same error message. Windows 7, Zone Alarm. Explorer 8.

Hi,
According to your description, there is a 500 internal server error when you select any Option in your OWA.
Based on my research, we can try the following steps:
1. Check whether Virtual Directories Authentication configured properly. Enable the ECP Virtual Directory with Anonymous and Basic Authentication.
2. Check on the Application Pools to view whether ECP Application Pool is running on .NET Framework v4.0. It maybe the incompletely installation of Framework that causes this error.
If so, We can try to run the following command as Administrator:
%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
Or change the MSExchangeECPAppPool from .NET Framework from v4.0 to v2.0. Then restart IIS.
If you have any question, please do not hesitate to tell me.
Hope it helps.
Thanks,
Winnie Liang

Connection to the server failed message when I open mail. Cannot get mail. What does this mean?

When trying to access my mail iCloud gives the message - connection to server failed. Cannot get mail.
It was working fine two days ago

I have also just tried to access my mail from iCloud.com but no luck here either

I get an update server error message when i try to update my phone. I've uninstalled iTunes and all related software in the proper order and then reinstalled with security software disabled. no what?

I could use some help. Apple support walked me through the uninstall and reinstall of all iTunes and Apple files in the proper order with my security software disabled. I still get the following message:
"The iPhone software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later."
Any ideas? I'm on a Dell i5 Core with Windows 7.

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

"server failed message" when I try to get e-mail, but no problem getting online

I cannot retrieve e-mail. iPad error message is"server failed" . I can get online, however.

They are two different things. Your mailer server coul be down. Try again later.

Receive "server error" message when connecting to website which has been successfully for many years

After successfully using several secure websites for years, I now get an error message "certificate has expired" with a FUTURE expiration date. I can't over ride the error even though the option is offered.
There is also a running banner of news headlines at the top of the Mozilla homepage. Those headlines have not changed in 3 weeks.

recomend you just use pop mail if using a home machine, phone etc makes life easier.

Unable to start debugging on the web server error message when running asp

Hi Mark,
i want to apply a asp web application on your book at page 336/337
I am using .NET 2005 pro. edition.But if i run(play button) the asp web site
it gives above error message which i wrote on the subject.
Could someone help me?
Thanks for reading..
Regards..
S.K

You may want to check whether your Web application has been configured to use "Integrated Windows Authentication".
Go to your IIS, check the Properties of your web application under Web Sites\Default Web Site, select "Directory Security" tab, click the first "Edit..." button (for Anonymous access and authentication control). At the very bottom, make sure "Integrated Windows authentication" is checked.
Re-start your Web application.
Message was edited by:
shsu

V120 server scrolls message when rebooting

Similar Messages

Maybe you are looking for