V1u 24pA capture to Prores not resulting in a 23.98 file

Hi,
I just installed FCS2 6.0.6 and I am trying to capture footage shot in 1080pA24 from my Sony V1-U Camcorder.
Here are my Video Settings:
Sequence Preset: Apple ProRes 422 (HQ) 1440x1080 24p 48 kHz
Capture Preset: HDV-Apple ProRes 422 (HQ)
Device Control Preset: Sony HDV FireWire
These are the settings recommended by every source I can find for capturing 24pA video from the V1-U. The problem is that with these settings or any other variation I have tried the video ALWAYS comes in at 29.97 with obvious interlace artifacts instead of the 23.98 progressive that I want.
This is maddening because EVERYONE says that FCP will "Automatically" remove the 3:2 pull-down. But it's apparently not doing that...
I even tried an "Easy Setup" from http://www.moviola.com/hdv_prores designed SPECIFICALLY for capturing 1080pA24 from the V1-U
I found a couple other people on other forums that had this SAME problem. Unfortunately the topic was hijacked by someone with a different problem and no one ever solved the one for which the topic was created. So please don't do that to me

Take a look at your capture settings in Audio video settings. Highlight the preset and select edit. see if you can select "remove advanced pulldown"
It is available on the dvcProHD settings. not sure why you've chosen HQ instead of straight pro res. My understanding is HQ is for greater than 1920x1080.

Similar Messages

Quality of Clip captured using ProRes and clip converted to ProRes

I have captured the same clip in both HDV 1080160 and ProRes 422.
After editing the HDV version I export it using QT Conversion using the compression type "Apple ProRes." I then use the standard Compressor "DVD: Best Quality 90 minutes" preset unaltered. It looks fine in the Compressor Preview window. I then import the resulting files into DVDSP, and the quality is good.
After editing the ProRes version I export it using QT Movie using the current settings. I then use the standard Compressor "DVD: Best Quality 90 minutes" preset unaltered. It looks fine in the Compressor Preview window. I then import the resulting files into DVDSP, and the quality is bad.
Both clips are "ProRes" when imported into Compressor, and they both look fine in the Compressor preview window. The difference is that one was captured in HDV 1080i60 and converted to ProRes using QT, and one was captured in ProRes and exported as a QT Movie. Surprisingly, at least to me, the clip originally captured in HDV and then converted to ProRes looks much better than the clip originally captured in ProRes when they are imported into DVDSP. Both .mov files are compressed using the same Compressor preset, and the preset is unaltered.
I assumed the clip originally captured using the FCP ProRes preset would yield the better quality, but this isn't the case. I've tried capturing using ProRes 422 HQ, and the results are the same. I must be missing something, but so far I cannot explain it.
Thanks

I have tried at actual, full screen, using 1080p30 size from the original compressed to 4mbs (something my system can handle without blinking), 720p30, etc. etc. etc. Nothing stops the jumps. Even the activity monitor shows only 5%-15% processing being used by QT and/or FCP.
I plan to pull my old G5 out of the closet, it runs 10.6.8 and is still rock solid for video editing in FCP7. If it plays smooth on that 8 year old system then I know it's Mavericks. I'll try that tonight. It floors me though why the original 1080p30 will playback perfect via FCP and Motu, but once I turn of external monitoring and just try to play it via the preview monitor it is jumpy as **** and then the exported file does the same thing. So strange. I even deleted prefences of FCP and that does help with screen playback initially, but it always gets jumps in it after playing for a while.
I knew I should not have started using Mavericks and I HATE FCP10.

In v.11, how can I capture video but not audio from a camera?

In v.11, how can I capture video but not audio from a camera?

Rodney
I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
or
b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
Publish+Share/Computer/AVI with Presets = DV NTSC Standard
Please let us know if any of that worked for you.
Thank you.
ATR

Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task.
Everything went off without a hitch until I restarted the technician pc.
I got the dreaded
"Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
I tried to deploy the captured image to the same computer and got the same error
I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
Other information that might be useful:
I never used WISM to create an unattend.xml nor did I attach one to the image.
I didn't try to copy user profiles/settings/migrate etc
I imported the captured image to WDT. Created a standard task and added 2 nodes
-Inject Drivers
-Install Application
As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
+-----------------+
| Unattend.xml:
+-----------------+
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<JoinWorkgroup>WORKGROUP</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>PVA-PC</ComputerName>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value></Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value></Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>

https://skydrive.live.com Here's the end of the log file:
2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info Also, here's my [Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
SkipDomainMembership=YES
DomainAdmin=Administrator
DomainAdminDomain=go.local
DomainAdminPassword=************
SkipTimeZone=YES
TimeZone="035"
TimeZoneName="Eastern SkipLocaleSelection=YES
KeyboardLocale=en-US
UserLocale=en-US
UILanguage=en-US
Bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\10.0.0.1\Dep UserID=Administrator
UserDomain=go.local
UserPassword=***********
KeyboardLocale=en-US
SkipAdminPassword=YES
SkipProductKey=YES
SkipBitLocker=YES /redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
CMI CBS_Core_Finalize:Calling cbs core finalize complete
CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
[0x030023] CMI Callback_CMI_ConfigInstall: Exit.
[setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
[setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
[setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
[setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
[setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
[setup.exe] SMI data results dump: Description = Setting is not defined in this component.
[setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
[0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
[0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x80220001
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
[0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
customsettings.ini as I think it changes the unattend?
Standard Time"
loymentShare$

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.
I was able to register it though.

Not a surprise. The Acrobat 8 product family passed into End of Support back in 2011.
Be well...

CAPTURE PREVIEW SCREEN NOT AVAILABLE

Capturing from CANON XH A1, with all correct settings (I think so...), I can see in Premiere capture screen - original clip in PLAY. But when I press RECORD button, get a screen with multi languages (!) saying "Reprodution in Video Hardware". Clip is really captured, but without Preview.
Otherwise, capturing in HDV Split, with exactly same settings, everything goes easy and correctly!
What am I doing wrong?
Like in previous questions, you help is useful and welcome. Thanks a lot!

This is not so weird. You need to remember that the transfer from your camera to the computer is a asynchronous communication. Once the camera starts the transfer, it assumes that the computer is fast enough to transfer the information to the HDD without dropping frames. With DV, this wasn't a major problem as the DV format allowed a bit for bit transfer at only 4 mb/sec with no processing--hence no processor delays.
However, with HDV, the mpeg file is contained in a wrapper that must be removed before the the mpeg can be displayed and requires a much higher IO rate (25 mb/sec?). It seems that Adobe made a design decision not to mess with this during capture and to not display the real-time image so as to minimize dropped frames on capture.
There are standalone programs that can capture and display, but these programs have far lower overhead and memory requirements than does Premiere.
Maybe when we're all running 64bit vista on multiple processor motherboards with huge memory and fast disk arrays, this crutch wont be necessary.

PO version change does not resulting output

Hi,
Initially PO created with version "0" and resulted message out put automatically and PO got printed.
Then, user has done some changes to PO then it is resulting version "1" but this vesrion does not results automatic out put as like version "0"
Please suggest me,
Thanks,
Venkat

hi,
Check settings again..
1.whether you have given reason of change while you make changes in the document and whether it has been customized??
2. Check settings for "set up for change displays"
3. check Settings for PO messages ....here check whether the field is defined for relevent changes ie." Print relevent Purchase doc. changes"...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Sep 23, 2010 10:45 AM

Modification to Sales Office in Sales Order not resulting in Delta in BI

Hello,
I am experiencing a issue in delta update to 0SD_C03.
Any changes to the Sales Office in a Sales Order are not resulting in a delta update in 2LIS_11_VATIM OR 2LIS_11_VADHR.
This is resulting in erroneous reporting when looking at Sales Orders at Sales Office Level.
I would like to know any solution or work around for this issue.
Regards,
Ashutosh

Hi,
have made a trace after select a sales area, when the ddlb of the sales office was shown.
it seems there is no authorization check related to sales office restriction in standard.
you might consider to add your logic to
Class CL_BP_SALES_CORPACCOUNTOR_CN03
method GET_V_SALES_OFFICE
by enhance the component
BP_SALES
view
CorpAccountOrgEF
under context node
CorpAccountOrgEF
Hope this could do help!
Hongyan

Capture window will not open-Premiere CS4

Hi there,
The capture window wll not open no matter what I try. I have installed and uninstalled the program without success. I never had this happened before.
Please help!
Thanks,
Elio

Also, File/New Window doesn't work when I already have a window open.

Canon HV30 Returns Video Format provided by capture device is not supported by this application

I am trying to stream our church services using Flash Media Live Encoder 3 using firewire and a Canon HV30 Camera.
I am not understanding how to use my firewire based high def Canon HV30 Camera as the video source device for FLME 3 ? When I hook everything up I get the error "Video Format provided by capture device is not supported by this application". The spec sheet says the HV10 should work.
Is there a work around for this problem.
In Him,
JMb <><

The error is coming because the camera might be giving HDV format, which is mpeg-2 encoded. FMLE needs raw format to work with. Please configure the camera to give DV out to work with FMLE.

Had some old movies from reel to reel on a vcr. i converted these to mp4 format using pinnacle video capture, quality was not great but it was decent enough on my computer. when i placed these on my ipad it was much worse and very choppy. i have handbra

had some old movies from reel to reel on a vcr. i converted these to mp4 format using pinnacle video capture, quality was not great but it was decent enough on my computer. when i placed these on my ipad it was much worse and very choppy. i have handbrake and thought i could maybe change the movie so i could play it on ipad but dont know what dimensions or framerate etc. currently the movie on the computer is in 640 x 480 mpeg 4 aac. thanks derek

Jon,
What Julianne said at first about re-linking made perfect sense and I followed it easily, had actually already been there. But in my situation now, it didn't have any effect. The directory of folders which had already been added were still just as they were, and the outstanding balance are not in the desired position. And the folders which had been brought in earlier today when I clicked "synchronize folder", were still missing all the metadata.
Maybe this means I need to start over, and I'm fine about doing that that, but I don't know what it takes to accomplish that. I'm concerned now that any changes I make out of guesswork could only make the problem harder to resolve. It just feels to me like something I did at the beginning just wasn't right, and now it's a tangle.
Can you advise?
Thanks,
Gary

Capturing HDV-ProRes

Hello,
I I have been for some time been able to capture HDV from a XHA1 to ProRes without any problems. Recently I captured with the same camera HDV to DVPal and since then I can't capture HDV-ProRes anymore. I says "Can't initialize..."
I have trashed the preferences... but that didn't help.
I you have any helpful ideas - I would be more than happy to hear them!
Best regards,
/Harald

You got it! Here's a great article for you. There's a link at the end if you need Pro Res Easy Setups for Canon and Sony cameras.
http://www.kenstone.net/fcphomepage/capture_hdv_prores_fwbalis.html
And a second article if you've already captured as HDV and want to export as Pro Res:
http://www.kenstone.net/fcphomepage/hdv_timeline_to_sddvd.html

When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

TS1559 my ipod touch 1g upadate now 3.1.3 but my wifi still Greay Out . i am following this steps lot of time but not result . please tell me 100 % solution of greayed wifi ! please

my ipod touch 1g upadate now 3.1.3 but my wifi still Greay Out . i am following this steps lot of time but not result . please tell me 100 % solution of greayed wifi ! please

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?

I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?

You need to select the text and apply:
Inspector > Text > More > Language > Français
So Pages knows what language to check it with. Language is like bold or color or font, it is part of the text style.
Peter

V1u 24pA capture to Prores not resulting in a 23.98 file

Similar Messages

Maybe you are looking for