V2.0 - Smart Playlists No Longer Working

Hello all,
The Shuffle Songs routine in V2.0 is just as bad as in V1.1. We constantly hear the same songs over and over and some songs we never hear. To solve this problem I was advised to create a Smart Playlist that would only play songs with a play count of 0. This worked great in V1.1 but does not work in 2.0.
I am streaming through iTunes. Looking at the iTunes Smart Playlist, it is working correctly and removing a song once it has been played once. But no many how many times I reload that particular iTunes library, previously played songs are still being shown in the playlist when I select it on the ATV. And of course, ATV likes to play the same songs over and over again from it while on shuffle.
Any suggestions?

FYI...
Reset ATV, no change... Deleted Smart Playlist and recreated, no change... Deleted Smart Playlist and recreated with a DIFFERENT NAME than before, it now works as before in V1.1.
Go figure...

Similar Messages

  • Smart Playlists no longer working on my 4G iPod

    I have a 20GB 4G Mono iPod that is running the latest firmware version (3.1.1) and I have several Smart Playlists I use frequently with it.
    Before I upgraded to iTunes 7 last week these playlists would dynamically update on the iPod itself without the need for me to synchronize with iTunes (this was also a bug introduced in firmware 3.1 and corrected in 3.1.1). Now the "smart" playlists on the iPod act just like static playlists: if I play a song that is supposed to be removed from the playlist once the song finishes, it doesn't until I sync with iTunes.
    Is anybody else experiencing this issue?
    I have tried restoring my iPod just in case.

    Well, 7.0.1 doesn't fix this for me, but downgrading to 6.0.5 did. I followed the first four steps here:
    http://macslash.org/comments.pl?sid=6335&cid=112858
    Then, while keeping the "iTunes Music Library.xml" file in ~/Music/iTunes, I made a new "iTunes Library" file (instructions at the bottom of this link):
    http://www.mani.de/en/software/macosx/ivolume/faq.html
    Then installed 6.0.5 and dragged the xml file onto the new program file to import. The new groupings (movies, podcasts, etc.) turn into playlists at the bottom, but can be easily deleted.
    This will allow downgrade while keeping play count, ratings, etc. intact; I did lose artwork for all the songs for which I had downloaded the art from iTunes store, and iTunes is recopying those songs to the iPod, but I'd rather have the playlists update on the iPod than have the artwork.
    iBook G4 1 MHz   Mac OS X (10.4.7)  

  • Podcast playlist no longer works

    I just synced my ipod nano, and my podcast playlist no longer works. This seems to be due to an upgrade to iTunes 9. It seems to only want to deal with music files in playlists, not podcasts. What am I doing wrong?

    Found an answer in the following thread:
    http://discussions.apple.com/thread.jspa?threadID=2152465&start=0&tstart=30

  • Installed Maverick - smart art no longer working on either Word or Excel Need Help

    Installed Maverick and found that on both Word and Excel the "Smart Art" no longer works.  I reinstlled software but that did not solve the problem.
    NEED HELP
    Thanks

    Your issue seems to be only with those two apps, first check to see if they are up-to-date and if you still have issues please post in the Office for Mac Product Forums

  • My smart playlist no longer seems to work when it comes to ratings?

    This is a bit weird. I have like 40 podcasts under one podcast (I'm behind in listening to them). Rather than copy all of them to the ipod I created a smart playlist that had these rules:
    Podcast is true.
    Artist contains XXXX (xXXx= name of the author)
    Rating is at least * (I use one star and select the one's I want to listen to based on stars).
    Then I sync the smart playlist to my ipod.
    Now, all the ipods show under the smart playlist and I can't get them to go away. I would think the rating is the problem. I've "selected all" and changed the rating to "none" but the podcasts all still show under the smart playlist.
    Any idea what has happened or what I'm doing wrong?
    Thx.

    I figured this out on my own. I noticed when looking at the smart playlist that somehow "one star" had become noted for the ENTIRE series. So it was copying everything over.

  • Smart playlists no longer update dynamically

    I have several smart playlists that have a couple of rules... one based on rating and one based on whether or not it is present in a regular playlist.  When I change the rating of a song so that it no longer meets the smart playlist's criteria, it remains in the list.  It will not update until I sync with the PC.  The other criteria, the "regular" playlist, isn't updated... and is present on the iPod as well in my iTunes library, so that's not the issue.  I'm running the latest greatest version of iTunes and the iPod touch is a model PD721LL/A, version 8.2; it has over 15GB free, so space isn't a challenge either.
    I suspect that there is some sequence of settings that will allow this to update dynamically, but I'm not sure what that would be or where to even attempt it. 
    Any suggestions would be greatly appreciated!
    Thanks in advance,
    Laura Tieri

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Smart Playlists no longer updated with iOS 4.3 on iPhone 4

    I've run into an issue with the latest iOS 4.3 update: my smart playlists are no longer dynamically being updated on my iPhone 4.
    All of my main playlists are smart: they exclude songs that I've played in the past week. Earlier today when I'd play a song and it went to the next one, it'd immediately remove the song from the playlist (so I was always on track 1 of XXX). With 4.3, this is no longer happening and the smart playlist only dynamically updates when I sync my phone with my computer. This is annoying because it means that I can end up hearing the same song again if I switch playlists.
    Anyone else run into this? Any fixes? I tried rebooting my phone to no avail.

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Smart playlists no longer live update

    I wrote in about this once before but got no solution. I use a smart playlist on my ipod touch to give me only podcasts with less than 1 play, so that I only get the new ones. When I got the ipod for Christmas, and until about late January it was working fine. All of the sudden it stopped live updating, and now only does it when I sync. This really ***** because I listen to about 25 podcasts a week, so it can be very confusing as to which I've heard and which I haven't. Is there any solution for this? I've tried using podcast = true and genre = podcast, but neither will smart update. As I said it worked fine previously, so it's not that podcast = true is completely broken, as I've heard it said elsewhere.
    Any help much appreciated.

    Sorry about that, I must have misunderstood.
    This is the situation in detail.
    When it worked:
    A podcast would download. It would instantly appear in my smart playlist labeled "podcasts".
    The playlist has the rules "podcast = true" and "playcount = less than 1".
    I would sync my ipod.
    I unplug the ipod.
    When I listened to a podcast on my ipod completely (until the very end), the podcast would be removed from the smart playlist immediately, even though my ipod wasn't plugged in.
    Now:
    A podcast downloads. It appears instantly in my smart playlist.
    I sync my ipod, and it appears in the smart playlist there too.
    I unplug the ipod.
    I listen to a podcast (every second of it) through the playlist. When the podcast is over, that podcast remains in my playlist, despite having a playcount greater than 1.
    When I listen to podcasts on my computer directly via the smart playlist, it IS live updated. That is to say that when the podcast ends it is immediately removed from the playlist. That's what I want to happen on the ipod when it isn't connected to my computer, just like it used to.

  • Smart playlists;  no longer smart in version 3  how to tell Apple?

    Since iphone and ipod version 3 & itunes 9 smart playlists will not sync onto ipod. Several posts relate to this. Apple has posted a complex set of solutions, including to disable live updating. The later works but eliminates the value and purpose of smart playlists as a means to manage subscriptions and updates.
    The final solution is to create a second smart playlist with the rule "playlist is (name of first playlist)". That works but is far too complicated for the average user, and has made my playlist panel into double the size with half the convenience.
    If anyone knows how to contact Apple with a request for an acknowledgment that they need to fix this problem I would appreciate it. Two updates later, no fix, not even a promise to try to fix.

    Anna:
    Yes, I am fully updated. The last update did not resolve the smart playlist jumbling.
    The solutions mentioned in my post were in fact published by Apple at this link http://support.apple.com/kb/TS3044
    That would be fine but it tends to suggest that the user is doing something wrong that has to be "changed" when in fact the problem arose with the latest software versions, and the user workaround is clumsy and unsatisfactory.
    I will try using the feedback form

  • IPhone playlists no longer working - iOS 8.02

    Upgraded to IOS 8.02 last night.
    This morning on the commute to work my playlists are all 'greyed out', uneditable and I cannot create new playlists. Also, the shuffle feature has disappeared.
    Extremely annoying as no longer can listen to music on iPhone 5s.
    lm2

    What Troubleshooting steps have you tried...
    Have you consulted the User Guide with regard to your Settings = Sounds... etc...
    Mute Switch  = On or Off...

  • Apple Mail smart mailboxes no longer work

    Well, the subject says it all.
    I am running Mail 7.3 under Mac OS X 10.9.5 and have 8 smart mailboxes set up. However, as of this morning, none of them are displaying any emails, along with all the VIPs. However, all other folders etc are working normally.
    Any suggestions anyone?
    Joe.

    Ok, so I was right about the Combo updater - wouldn't install on my system.
    So I tried all your other suggestions (well, except for installing Yosemite) and no go, although I'm not sure that resetting my file and folder permissions worked properly (I waited 15 mins and still didn't get the 'reset' button back again, so I just continued on with the rest of the steps).
    Here is my Etrecheck results:
    EtreCheck version: 2.1.8 (121)
    Report generated 23 March 2015 9:59:21 pm AEST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,2
        1 3.06 GHz Intel Core i3 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 4670 - VRAM: 256 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.9.5 (13F1066) - Time since boot: 0:12:30
    Disk Information: ℹ️
        ST3500418AS disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (190.97 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
        ASMedia AS2105 1 TB
            EFI (disk2s1) <not mounted> : 210 MB
            Digital Media (disk2s2) /Volumes/Digital Media : 999.86 GB (274.31 GB free)
        Samsung M3 Portable Samsung M3 Portable 2 TB
            EFI (disk1s1) <not mounted> : 210 MB
            iMac 2TB TM Backup (disk1s2) /Volumes/iMac 2TB TM Backup : 2.00 TB (753.92 GB free)
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        INNO TECH USB to Serial
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Library/Application Support/VirtualBox
        [loaded]    org.virtualbox.kext.VBoxDrv (4.3.20) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.20) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.20) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxUSB (4.3.20) [Click for support]
            /Library/Extensions
        [loaded]    com.usboverdrive.driver.hid (3.1 - SDK 10.8) [Click for support]
            /Library/Extensions/USBOverdrive.kext/Contents/PlugIns
        [loaded]    com.usboverdrive.driver.bt (3.1 - SDK 10.8) [Click for support]
        [not loaded]    com.usboverdrive.driver.hid.safe (3.1) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) [Click for support]
        [not loaded]    com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) [Click for support]
        [not loaded]    com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) [Click for support]
        [loaded]    com.orderedbytes.driver.ControllerMateFamily (4.6.0 - SDK 10.6) [Click for support]
        [loaded]    com.squirrels.airparrot.framebuffer (3 - SDK 10.7) [Click for support]
        [loaded]    com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) [Click for support]
        [loaded]    com.techsmith.TACC (1.0.2 - SDK 10.8) [Click for support]
        [not loaded]    com.ups.driver.UPSVendor (1.0.0d1) [Click for support]
            /System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
        [not loaded]    com.belcarra.iokit.netpart.panther (1.6.3) [Click for support]
            /System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
        [not loaded]    com.belcarra.iokit.usbpart.panther (1.6.3) [Click for support]
            /System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
        [not loaded]    com.RemoteControl.USBLAN.panther (1.6.2) [Click for support]
            /System/Library/Extensions/ControllerMate.kext/Contents/PlugIns
        [loaded]    com.orderedbytes.driver.CMUSBDevices (4.6.0 - SDK 10.6) [Click for support]
        [not loaded]    com.orderedbytes.driver.CMUSBKeyboard (4.6.0 - SDK 10.6) [Click for support]
        [not loaded]    com.orderedbytes.driver.CMUSBPointer (4.6.0 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.orderedbytes.ControllerMateHelper.plist [Click for support]
        [running]    com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.netputing.handyPrintSystemDaemon.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
        [loaded]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
        [loaded]    com.quark.quarkupdate.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
        [not loaded]    org.virtualbox.startup.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.acronis.monitor.plist [Click for support]
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.parallels.mobile.startgui.launchagent.plist [Click for support]
        [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        DVDAuthorizeHelper    Application  (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
        Wondershare Helper Compact    Application  (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
        USBOverdriveHelper    Application  (/Library/PreferencePanes/USB Overdrive.prefPane/Contents/Resources/USBOverdriveHelper.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        Default Browser: Version: 537 - SDK 10.9
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        1Password
        Open in Internet Explorer
        Video Converter
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Quark Update Preferences  [Click for support]
        USB Overdrive  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 308.27 GB
            Digital Media: Disk size: 999.86 GB Disk used: 725.55 GB
        Destinations:
            iMac 2TB TM Backup [Local]
            Total size: 2.00 TB
            Total number of backups: 36
            Oldest backup: 2015-03-11 08:48:55 +0000
            Last backup: 2015-03-23 10:17:51 +0000
            Size of backup disk: Too small
                Backup size 2.00 TB < (Disk used 1.03 TB X 3)
    Top Processes by CPU: ℹ️
             2%    WindowServer
             1%    fontd
             1%    hidd
             0%    AppleSpell
             0%    com.apple.WebKit.Networking
    Top Processes by Memory: ℹ️
        180 MB    com.apple.IconServicesAgent
        168 MB    Mail
        168 MB    Safari
        129 MB    com.apple.WebKit.WebContent
        90 MB    com.apple.WebKit.Networking
    Virtual Memory Information: ℹ️
        7.36 GB    Free RAM
        3.94 GB    Active RAM
        692 MB    Inactive RAM
        892 MB    Wired RAM
        421 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 23, 2015, 09:47:43 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-21 4743_[redacted].crash
        Mar 23, 2015, 09:47:31 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-21 4731_[redacted].crash
        Mar 23, 2015, 09:46:19 PM    Self test - passed
        Mar 23, 2015, 08:59:14 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-20 5914_[redacted].crash
        Mar 23, 2015, 06:06:37 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-06 0637_[redacted].crash
        Mar 23, 2015, 06:06:36 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-06 0636_[redacted].crash
        Mar 22, 2015, 07:18:59 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-19 1859_[redacted].crash
        Mar 22, 2015, 07:09:35 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-19 0935_[redacted].crash
        Mar 22, 2015, 08:32:46 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-08 3246_[redacted].crash
        Mar 22, 2015, 08:32:35 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-08 3235_[redacted].crash
        Mar 22, 2015, 07:33:06 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-07 3306_[redacted].crash
        Mar 22, 2015, 07:33:05 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-07 3305_[redacted].crash
        Mar 22, 2015, 07:32:55 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-07 3255_[redacted].crash
    Anyway, I'm gonna try the whole reset of my files and folders again and leave it a lot longer this time and see what happens.
    Joe.
    PS. Thanks again for all your help!

  • Podcast smart playlists no longer syncing to iPod nano?

    I've been a long-time iPod podcast listener, despite the obvious intent to push this product into oblivion. I am no longer seeing smart podcast playlists on my iPod. This is a HUGE bummer to me, as I listen to podcasts while I run. And I hate running with my iPhone.
    Anyone else not seeing smart podcast playlists syncing to their iPod anymore?

    Here is the solution: After five hours of endless error messages and incomplete re-syncs, it all boiled down to this: Restore the iPod Touch via iTunes. Everything was first erased from the iPod but then everything- contents (photos, music and settings) were restored from iTunes perfectly. Finally now MobileMe is also on all my Apple products - including the heretofore frustrating iPod.
    Hope someone can save themselves a lot of aggravation by trying this fix should the updates prove to be less the "seamless"!
    Cheers!
    john

  • After I did the new update to my phone, all of my "smart playlists" no longer sync.

    It's so annoying because now I can't listen to my recently added. Any way to get it back?
    The playlists such as "Recently Added" "Top 25 Played" "Recently Played" and "My Top Rated"
    Anyone know what to do, please?

    Uh been a while since I've had this question ask. From memory, right click playlist, edit playlist.
    Where it has playlist rules, click the plus button to add a new rule
    Change it to "Playlist IS music", that should work. If not, play around with the rules, changing it to something to do with standard music will allow it to sync.

  • Why are my playlists no longer working?

    I tried updating iTunes to the latest version but still no luck. When I play a song on the playlist, instead of going to the next song when the first one ends, it will just stop playing music (kind of like when you reach the end of a CD). It's kind of annoying having to individually select each song I want to play, when I have them all in a playlist. I have tried both using playlists I had previously created (that used to work) and making no playlists, and both have not worked. Any ideas?

    Anyone at all?

  • Playlists no  longer work with my Alpine CDA-9887 Car stereo

    I updated to 2.2 and all of a sudden when i search for playlists on my stereo, the search button on the head unit doesn't do anything. It is not the head unit because i tried it with other other ipods just to make sure and it worked perfectly. I never had this problem until updating to 2.2. Anyone else experiencing this?

    I had the same problem when I bought my Iphone 3G. The 3g has a different charging system than the first gen.. Here is a quick work around.
    http://www.scosche.com/products/sfID1/210/sfID2/318/productID/1667

Maybe you are looking for

  • 1 xml file to multiple xml files with 200 records in each

    Hello Experts, I have below scenario. Please suggest me which might be the best approch to work on. 1) XML file to XML file I will have 1 pretty huge XML file which i need to break in multiple XML files with 200 records each.   1) first approch i can

  • Copying Queries from one infoset to the other with variants

    Hello Gurus, I have two infosets (A & B) based on logical database PNPCE. Infoset A & B are exactly the same. Now, I want to copy the queries of infoset A to infoset B. I am unable to copy the queries with variants. And I am getting following message

  • Bookmarks folder disappeared

    There is an archived thread with this topic, but since it's archived I couldn't reply - I'll just start a new topic. Last night while surfing I went to click on a certain link, and found that one of my folders on my Bookmarks Bar had disappeared. I c

  • Using "share" feature with QT Pro

    I downloaded QT Pro for the one purpose of posting small video clips created in FCE to my mobileme account. When I select the "share" option, QT Pro goes through the process of exporting and uploading to mobileme. I can see it working. Then, my brows

  • Iweb problem/idisk problem

    hey guys, sorry to be a pain but i have trawled through forums and tried to fix this in every which way but it continues to frustrate me beyond belief. Currently my iweb DOESN'T sync. photos which i have had up n my site for the last 6 months iweb no