V2.1 Destinations Uncategorised.

I upgraded my N97 to 2.1
I backedup my settings.
Performed a hard reset.
Restored my settings.
When i now go to Destinations, they are all Uncategorised.......
Any ideaS?

Not a good idea to use same settings anyway, better result if you do reset and start phone afresh.And it can;t take that long to find your destinations again ! My phone's definately improved with V2.1, though it doesn't appear the same for everyone reading some of the threads.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Got 3G coverage yet not connecting to web

My Iphone 4 has stopped connecting to the internet but I have got 3G coverage. The loading cirle moves as normal yet the page doesn't load and a message comes up ; cannot open page - safari cannot open the page because it is not connected to the internet.
I have went through all the setting i.e full reset on my phone with no joy.
Is it because I have not updated my software since I got the phone a month ago for it's still got versio 4.3.3.?

1) If you have updated OVI Maps application to v3.06 this uses a different set of maps to those preinstalled on mass memory for v3.04. You may need to delete E:\CITIES + .qf file usually at bottom of list if using File Manager in Office folder, re-start OVI Maps application to re-initialise and re-define necessary folder structure to download more maps with OVI Suite > Maps on PC
3) and 4) probably related as settings sent by Tesco and saved by you end up in wrong destination (Uncategorised). Go to Menu > Settings > Connectivity > Settings > Destinations > Uncategorised - you'll probably find Tesco WAP, Tesco WAP GPRS and Tesco MMS here. If you longpress on any access point a new screen with more choices pops up, for Tesco WAP and Tesco WAP GPRS choose Internet destination. Now go to Internet destnations and probably need your WLAN as Priority 1 and Tesco WAP GPRS as Priority 2 for starters. For this highlight access point > longpress >choose "Change priority" and then highlight say access point in Priority 1 > OK and it jumps up the list.
When you open web browser click "Options > General > Access point > change to "Ask when needed" and next time you can change it to say "Internet" where home WLAN is Priority 1.
Post again when you are a bit more familiar with this as probably then have more questions.
Happy to have helped forum with a Support Ratio = 42.5

N8 Next Update PR?? Pinch to zoom for pdf??

It is good to get a update for N8 today for PR1.1 and impressed that office is updated for editing now..hopefully the next update or future update could have pinch to zoom function for pdf document as the current one doesn't..keeping fingers crossed for that update

1) If you have updated OVI Maps application to v3.06 this uses a different set of maps to those preinstalled on mass memory for v3.04. You may need to delete E:\CITIES + .qf file usually at bottom of list if using File Manager in Office folder, re-start OVI Maps application to re-initialise and re-define necessary folder structure to download more maps with OVI Suite > Maps on PC
3) and 4) probably related as settings sent by Tesco and saved by you end up in wrong destination (Uncategorised). Go to Menu > Settings > Connectivity > Settings > Destinations > Uncategorised - you'll probably find Tesco WAP, Tesco WAP GPRS and Tesco MMS here. If you longpress on any access point a new screen with more choices pops up, for Tesco WAP and Tesco WAP GPRS choose Internet destination. Now go to Internet destnations and probably need your WLAN as Priority 1 and Tesco WAP GPRS as Priority 2 for starters. For this highlight access point > longpress >choose "Change priority" and then highlight say access point in Priority 1 > OK and it jumps up the list.
When you open web browser click "Options > General > Access point > change to "Ask when needed" and next time you can change it to say "Internet" where home WLAN is Priority 1.
Post again when you are a bit more familiar with this as probably then have more questions.
Happy to have helped forum with a Support Ratio = 42.5

Submit + destination

hi All,
I have a Z Function Module(RFC enabled) which passes the Program name its variant and the Destination.
Inside this FM it call the JOB_OPEN Submit and JOB_CLOSE FM to trigger the report of different system.
i mean if i m in sytem ABC and i want to execute a report on Sytsem on System XYZ then this FM works fine. Its is created by me and working fine sice last 3-4 year.
Now i ahve a reqirement to delete this FM if there is any SAP Standard functinality exist in ECC 6.0 which
can trigger the report at different destination.
Que-My question is How to trigger a report at different destination .I need SAP Standard functinality of ECC6.0. please help me.
Thanks in Advance
regards,
Saurabh T

This will give you an idea of how it works. Save the file and double click on it to open in IE.
<html>
<head></head>
<body>
<form name="myForm" method="GET" action="servlet/InsertRecords">
<P>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="1" onClick="onClickFunction(1)" >Insert Record
<BR>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="2" onClick="onClickFunction(2)" >Delete Record
<BR>
</P>
</form>
</body>
<Script Language="JavaScript">
function onClickFunction(inVar) {
   if (inVar == 1) { document.myForm.action="servlet/InsertRecords";
                     document.myForm.submit(); }
   if (inVar == 2) { document.myForm.action="servlet/DeleteRecords";
                     document.myForm.submit(); }
</script>
</html>

Error while scheduling Crystal Report within CMC with Destination as Email

Hi,
I have added a Crystal Report within the CMC. Before scheduling it, I have specified the Destination as Email and entered the necessary details. After scheduling it, the Report Instance gives a Failure with Error Message as -
destination DLL disabled.CrystalEnterprise.Smtp
How to rectify this?
Thanks,
Amogh

Hi,
go to the CMC and invoke the server list under Servers. Locate the entry for the Crystal Reports Job Server, select it and invoke the context menu using the right mouse button. Select Destination and add Email in the list of the possible delivery options. Configure the connection data for your SMTP server and restart the Crystal Report Job Server.
Regards,
Stratos

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!

Logical system and rfc destination

hello all,
what is the difference between logical system and RFC destination?
thanks for ur help in advance.
regards,
vikas

Hi,
In any ALE scenario u need one sender and one receiver system.
Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
Regards

Logical system and rfc destination related Query?

Hi Dudes
Do we need to define logical system and RFC destination if they are in different clients in same server
Regards
Raj Kumar

Hi
Both are client independent setting, so even if you define in one client, it would be available in other clients also.
Regards,
Sanjeev

Logical Destinations in Web Dynpro Java

Hi!
Is it possible to access logical HTTP destinations maintained in SAP NetWeaver Administrator via Configuration Management -> Security ->Destinations in Web Dynpro Java source-code.
I would like to use such a destination to configure an URL target for a IWDFrame UI element.
Thank you very much in advance!
Regards,
Thomas

I found out that there is a [Destination Service API|http://help.sap.com/saphelp_nwce711/helpdata/en/8b/8e7dac1e661d44bf2a676fd3948cc6/content.htm] for this purpose. Unfortunatly I am still not able to provide the required components security.class and tc/sec/destinations/interface to the web dynpro component. Maintaining them via Project Properties -> Web Dynpro is not allowed any more, and I couldn't find them in the DC perspective to add them as DC dependency.
Has anybody got an idea where these two libraries have gone?
Regards,
Thomas
PS: The 7.0 procedure, which can be found in various posts, doesn't seem to work any more for CE 711.

Data Federator Destination

Hi... we just started using Data Federator in our project.
I know that using ew could combine Data from multiple Source systems (such as SAP BI, SAP R/3, Oracle, Flat Files a.s.o) and create a semantic layer (Structure).
Could anyone tell us if the destination from Data Federator be >> a) BO- Universe and
b) SAP BI
- Anil

Hi,
Data federator creates the virtual table for the result set, you can create a BO Universe by providing the JDBC connections details of the DF project but i am not sure about SAP BI.
Regards,
Ramu.

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

How to log on to visual admin and create destination service

Hi all,
I see this statement everywhere while trying to configure adobe forms.
*it was only the HTTP destination FPICF_DATA_<SID> that was not created in the Visual Admin under Cluster -> Services -> Destinations*_
I got 2 questions here:-
1. the programs "FP_CHECK_DESTINATION_SERVICE" runs fine w/o destination check box. andwith the check box it gives the error "ADS: Request start time: Thu Nov 26 12:07:42 ........". SO how to resolve this. I have checked the blogs before and I did everything so far and stuck at the statement given above in bold.
2. What is this destination fp_icf_data_sid........... where to look for, I understand u need to log on to visual adm. But how is there a sap transaction "AL11" or from the web url. if it is web url ... "http://server_name:port/ ....." then I am lost after this I dont see anything called cluster and services anywhere....
And if am looking for visual admin at wrong places please provide step by step guide. I have seen steps to log on to visual admin on wesites but i dont know what am i doing, thats not clear. If someone can help from here.
Thanks,
Anu.

The Visual Administrator is a Java tool installed during the installation of a Java AS. It is a separate tool that can be copied and used remotely if desired. On a system running Java AS it can be found under /usr/sap/<SID>/JC00/j2ee/admin - just run 'go' under Linux/Unix or 'go.bat' under Windows. You must have Java installed on your remote system.
Once you have logged into your Java AS system using the Visual Administrator you can then setup your "Destinations", located under Server -> Services.
Check Note 944221 - Troubleshooting if problems occur in forms processing ...which will make clear the errors you are experiencing and help you solve them.
Nelis

RFC Destination Connection Pool requirement

Hi Experts,
I have a custom webdynpro java application to display number of work items pertaining to that particular user in a backend.
There are users who dont use this functionality as well. But the requirement is to place this application in home screen.
I have used both metadata and modeldata with hard coded user since we did not want error messages to appear for users who do not have backend access.
Application & Access Details
Application Location : Home Screen
Concurrent Users : 600 concurrent users maximum possible value
Connection Usage : Close connection immediately using disconnectIfAlive() method.
Now I need to configure JCO Pool Size , Max Connections, Wait Time for the RFC destination.
I have read a lot of post and documents but could not acheive clarity of thought on this.
Kindly let me know what values I should give in these fields for optimal performance and no connection issue for users.
Regards,
Porselvan

Hi Muthavudaiyan,
Hope you are doing good.
Basically from the JCo perspective, there are only 5 parameters that are involved here:
jco.destination.pool_capacity:
Maximum number of connections that are held open in the pool for reuse (default: 1)
jco.destination.peak_limit:
Maximum number of connections that can be obtained from a pool at peak usage times
jco.destination.max_get_client_time:
Maximum time to wait for a free connection if the peak limit is reached before exception is thrown
jco.destination.expiration_time:
Timeout period after which pooled idle connections can be closed (default: 600000ms = 10mins)
jco.destination.expiration_check_period:
Regular time interval for checking if pooled connections have expired and will be closed
The values are determined by the application in question. The ideal values have to told to you by the application developer; there are no two ways about this.
Thank you and have a nice day :).
Kind Regards,
Hemanth

V2.1 Destinations Uncategorised.

Similar Messages

Maybe you are looking for