V21 firmware with flashlite 3

so does anyone have any news on v21 firmware or is it still a no go area
Do not! hack your phone its very very bad

thanks for reply
I know its hush hush but there is always a chance someone might post something surely.
Do not! hack your phone its very very bad

Similar Messages

  • How can I associat ".swf" files with flashlite 2.1

    How can I associate ".swf" files with flashlite 2.1? When I
    install flash lite 2.0,it can do ---- click .swf files system can
    autoly use flashlite to play.But now I install flashlite 2.1,it
    lost this ability return as "unknow files formate".
    Now,how can I reassociate ".swf" with flashlite 2.1?
    first: I must use flashlite 2.1.
    second:I must click .swf file directly.
    I know another way to open :open the player and then find the
    .swf,and open it. But ,unfortunately,I can not use this way to
    open.Now I will be looking for another way.

    unfortunately, the 2.1 developer edition you have installed
    has not overwritten the original version integrated into the
    symbian OS by the manufacturer. This means that the only way to
    open the 2.1 files is to open the 2.1 player from your apps menuu,
    and click on the swf file. You will only get direct access if the
    updated player is in a firmware update for you handset.
    Matt
    http://www.outside-media.co.uk/blog

  • The N97 is still rubbish on v21 firmware

    After upgrading my N97 to v21 there were some improvements but the phone was still very slow and still had several bugs, stability issues, and poor reception.
    As I had upgraded without a reset I decided to try doing a complete rebuild of the phone to see if I could iron out some of the issues that I had been having with the phone. So I uninstalled all of the apps, formatted the mass memory, hard reset the phone, reflashed the v21 firmware, hard reset the phone again, performed the setup, re-installed the apps, reloaded my media, and reloaded the maps data. As you can imagine this is not a small undertaking with just the reloading of media and maps taking several hours even though I only use a third of the mass memory.
    So after all of this effort the phone was slightly better but still suffers from bugs, stability and performance issues, and poor reception.
    Nokia this just isn't good enough for your expensive flagship device. Firstly the consumer shouldn't have to go to this amount of effort for a firmware upgrade and secondly after the v21 firmware upgrade the N97 is still not reliable, terribly slow, and provides a very poor user experience. 
    Nokia N97 (RM-507) v 22
    iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

    The Nokia N97 and the Nokia N97 Mini are rubbish phones. Unfortunately I am locked into a contact, so will have to use this piece of rubbish until 2011. Nokia just don't seem to be able to get it right, as even the new version of the Ovi Suite does not work correctly. I have tried loading this on a machine running XP, Windows 7 and Vista, and the Ovi suite still does not work correctly. When you sync your contacts, it takes for ever, and then gives you an error message. I will never use another Nokia product, they seem to have lost there way

  • N85 need a new firmware with CPU Clockrate upgrade...

    Just Like Nokia 5800XM we need new firmware with less bugs and also Upgrading the CPU clockrate to 434Mhz which possible as we seen it on Nokia 5800XM for N85
    any Opinions about it?
    Message Edited by saeid1371 on 24-Sep-2009 11:45 AM

    That is not going to happen as the processor on the N85 is already running at it's maximum clock speed.
    The 5800 was underclocked (not overclocked) due to instabilities of the new v5 operating system. Once they had fixed the problems they restored it to it's actual speed.
    Nokia will never overclock a device so it is not possible to increase the clock speed of the N85.
    If you want a faster but similar phone you will need to upgrade to an N86.

  • Firmware with Arabic language

    Hi
    I just bought Sony z1 from  UK 
    but The problem is No Arabic Language 
    plz if u have firmware with Arabic lang Can u add here TFT 
    thanks

    Here you go 
    http://forum.xda-developers.com/forumdisplay.php?f=2508
    Don't forget to give Kudos
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • 1.1.4 Firmware with Software Upgrade: Am I Jailbroken?

    OK. So my Touch is now running 1.1.4 Firmware with the Software Upgrade. According to MacRumours, I am now jailbroken:
    http://www.macrumors.com/2008/02/26/apple-releases-firmware-1-1-4-for-iphone-and -ipod-touch/
    Is this correct? And if so, does this mean I can run 3rd Party Apps NOW, without invalidating the warranty?

    no you are not jailbroken. what i believe the article is saying is that if you were jailbroken prior to the update, you would then be 'un-jailbroken' after you updated. as for the third party apps, the article is speculating that this update will support third party apps....but we are not allowed to speculate in here...but i think that's what the article is saying
    B

  • N95 NTM firmware with FDT

    Hello
    what is going on? there is no official firmware with Field Test Display for n95 and there is no way to put it externaly
    i must have 2 phones (one common n95 and old 6680) to test gsm channels after BTS launch
    I am Nokia-Siemens subcontractor and I need it to work
    Can somebody explain me that or tell me how to get this FW ?
    regards

    u will have to contact Nokia.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

  • N95-1 v21 Firmware review

    I was just wondering what Nokia should include in the next firmware-release after v21 for the nokia n95-1. After I upgraded from v20 to v21 I had many expectations concerning the changelog ([URL="http://www.allaboutsymbian.com/forum/showthread.ph​p?t=58226"]http://www.allaboutsymbian.com/forum/showthread.ph​p?t=58226[/URL]): Flashlite3, faster menu, rotation improvements...
    however, here's a BIG, FAT buglist:
    - Flashlite works fairly good with youtube although quality is worse than with mobitubia or emtube BUT other flashsites as myvideo.de or google video are terribly slow (50% speed, sound not properly synched) AND when resizing the page (to 75 or 50%) only the left quarter of a video is displayed
    - opening menu folders hasn't become faster; only if folders have already been opened and therefore loaded into the RAM the menu seems faster
    - rotation improvements are only noticeable when rotating the screen while displaying pictures or when having zoomed in. in all other situations screen rotation has become even slower (e.g. in the menu, or when having a full active standy with calendar and to do entries) AND when rotating the screen counterclockwise (e.g. with rotateme) there are loads of localization errors (e.g. OPTIONS and BACK are interchanged) and the camera viewfinder mirrors everything; in general, rotation is not very responsive
    - and that's another annoying bug: the device has become less responsive (is this the revenge of the keypress bug??:tongue
    - i'm getting the feeling that the e3 demo has a reduced framerate compared to v20
    - "GPS position acquisition is *much* faster than in V20." - this is simply not true, it still takes around 2 or 3 minutes without A-GPS to lock my position
    - if light sensor is set to minimum, the backlight sometimes is switched off even if I'm in a quite dark ambience (-> I can't see anything for approx. 10 seconds)
    - sometimes WLAN-scanning just goes off involuntarily and, even if I switched it off, the phone displays all available networks
    - standby-time improvements? i didn't realize any. I checked v20 with Nokias energy profiler (switched off everything possible, offline mode, no memory card inserted -> 0.06W) and then v21 (same process, again 0.06W)
    - WLAN wizard has remained the same; if I want to choose e.g. my home wlan "ConnectionPoint" (secure) it is not always displayed in the access point list. then I choose "search for wlan" to find it; everything's alright, "ConnectionPoint" is found but when I choose it, I have to enter the WEP key - extremely annoying!!!
    - a couple of bugs can be found in the music player. the responsibility of the media keys is considerably slow, it takes half a second to e.g. pause - I want it to pause immediately! And, if you push the keys several times in a row it stops the music only after your last push.
    - the volume keys are not switched when changing to landscape mode; it means that when playing back a video you have to press the LEFT volume key while the volume bars rise in the RIGHT direction
    - the browser is not fully developed; when rendering a website, the browser gives you a "first glance" at some parts of the page, but then there's a couple of seconds a white screen after which the browser renders the rest of the page. I don't get it, does the browser get the desktop resolution at first and then tries to allocate every object to the phones' resolution? Tell me.
    - layer ads cannot be closed as they are wandering together with the mouse
    - and lastly, when trying to watch flash vids not on youtube in landscape mode, the browser often crashes.
    I don't think these bugs are related to my device only as there would be no logical reason for this (I mean NSU distributes the same firmware to everyone with n95-1 and I definitely don't have hardware-related issues)
    Okay, enough about bugs. I would like to give my thoughts about what should be included in the next firmware-release:
    - ASR (as seen on n95 8gb v20)
    - everything should be supported by the 3d accelerator, esp. Flashlite 3 (it uses the CPU only), then video playback would work way better
    - page file (no more memory leaks); I'd rather have a temporary slow reaction of the phone while it does memory-eating procedures like videoediting than "out-of-memory" popups
    - there should be an expert's view option in the settings app to have access to more specific settings
    - GPS data should be queried at least each half a second from the chip to have a smoother position tracking. it would also be more accurate, since there wouldn't be such large jumps from one position to another when driving really fast
    - one should be able to switch WLAN completely off, not just the scanning; correct me if I'm wrong, but how can it be possible that even if WLAN is supposedly switched off, the scanning starts so incredibly fast? shouldn't there be a warmup phase of the antenna??
    I hope you guys read it and provide me with answers and opinions!!!

    I have recently installed v 21.0.016. A big concern is that I used to use the "GPS Data" application often, but this has now been removed!?
    1) Any idea where I can find the GPS Data app to re-install?
    2) If not available, which 3rd party apps could show me speed, elevation, coordinates etc?
    As a comment the Maps application is IMHO not as feature rich. I used to be able to plan a route and then start tracking my position on the highlighted route as I progress - this is no longer possible
    Thanks in advance for any insights

  • E71 - Problem with Flashlite 3

    Hi, I have this unsual problem with the flashlite. For E71 - it is suppose to be integrated with the web browser. It worked well for the first couple of days - however after that when I tried to watch clips from YouTube - the video did managed to load. instead - the portion where the video is suppose to be was left empty.
    I googled and found that e90 has similar problem from www.allaboutsymbian.com. Steve from AAS suggested for users to format their phone - ie *#7370# for flashlite to work properly again. I formatted my phone at least 3 times - but still in vain.
    Do any of you have similar problem? Any solution for that?

    I have a similar problem, but when I put those files from a sd card to a phone memory, they show up. Otherwise I have to browse the phone to get those files

  • New firmware with support iPod Hi-Fi

    Are there any plans to new firmware to iPod Classic with full support *iPod Hi-Fi*? I don't know should I sold my brand new iPod Classic 80GB, and buy used, older one - iPod Video. I realy like iPod Hi-Fi, but Apple doesn't. Why? It's not so old product, so *where is support for it?*

    Are there any plans to new firmware to iPod Classic with full support *iPod Hi-Fi*?
    Since no one here works for Apple we wouldn't know.

  • How to update firmware with a Mac?

    Hi there¡
    I want to update my N95 with the 20.0.015 firmware version.
    The point is that I am a Mac user, so I can't use the PC suite.
    Any advice?
    Thanks in advance!!!

    Hi koyote
    As a Mac user I use Windows under BootCamp, although NSU may also work under a Windows emulator I personally would not be happy doing this.
    I presume that there is no NCP within a reasonable distance to carry out software update for you?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia 5800 v21 firmware available in UK for Blue N...

    Why? This is annoying.
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

    I'm also having issues with V21 and it's has been pulled off in my are at least and I can't re-install it OTA or NSU. Here is my problem description.
    Message Edited by kimmokor on 05-May-2009 09:30 AM

  • Gettin latest firmware with updater

    I've updated fware with updater and although it said failed after install all seems to be ok. I noticed that my new firmware is the v5.0609.2.0.1/01-03-06 and not the v5.0616.2.0.3 (24-04-2006) version. Should I run the updater again? My previous version before I ran updater was the 2.etc/8/10/05 one(my best guess).
    Nokia N95 V11.0.026 17-04-07 RM-159 Vodafone Pay Monthly
    XBOX Live Gamertag : Mafustokes

    it displays a "A processar" thing when loading, and takes a lot of time to start.
    also, i was just informed that v5.0616.2.0.6 is not really a operator dependant update... it's a general update. but if you have a vodafone branded phone, you will not get the update because vodafone did not brand this firmware version yet.
    if you do not have a branded vodafone n70, but just a locked one, you still won't get the update... don't ask why!!! i'm still tryin to find out...
    Previous phones: 3330, 3410, 3510i, 3200, 6230, Nokia N70, Nokia N73, Nokia N82, Nokia 5500 Sport & Nokia N97
    Current: Nokia N900

  • Unknown Error (-1) at "restoring firmware" with iOS5 -  Cannot restore iPhone 4 - please help!

    Help!
    My iPhone 4 told me that it couldn't receive calls and that I needed to Restore. I tried to restore through iTunes, but when it started to "restore firmware" I got an Unknown Error (-1) and now my phone is in a perpetual state of needing restored, failing restore, needing restore, etc.
    I've tried everything which technical support suggested (updated iTunes, updated Windows 7, unplugged all other USB devices, deactivated Firewall and Virus killer, restarted computer, reinstalled iTunes, redownloaded Firmware file, etc.) but nothing has so far worked.
    All my phone shows is the iTunes logo with the USB connector, asking me to connect with iTunes. When I do connect, it goes back into the Restore error cycle.
    Please help!
    Thanks,
    Leon

    I have the same problem. The A/S center has no solution for this.
    I tried restoring ten times more.
    My phone is 3GS.

  • How to update firmware with a boot camp'd macbook?

    this is pretty frustrating..... there seems to be no way to update the firmware on a macbook that has had xp/vista installed. the disk is no longer a GUID type, it's an MBR disk now, and the EFI partition is gone. i could recreate the EFI partition but that wouldn't help at all with the GUID problem.
    i installed mac os x onto a clean external usb drive, which is now a GUID disk with the right file system and so on... it doesn't have an EFI partition, which i would have thought the mac os x installer would have made. the firmware updater has the big ! on the disk and says it doesn't meet the requirements.
    any ideas here? will the firmware update simply not run from an external drive? if so, how on earth is someone supposed to ever update their firmware if they use boot camp?

    When you create GPT using Disk Utility on your USB/FW it will have EFI and GUID, but you won't see them until back in Windows.
    And yes, you should be able to run firmware updates off USB drive with OS X. Should. But that doesn't always mean will/can or that it was even tested in that configuration
    Boot Camp is for GPT with an MBR table to trick or allow Windows to install. If you formatted a drive internal as MBR you didn't use BC or at least not need to.

Maybe you are looking for

  • Can't view files in mini bridge

    Help - I've just had to reinstall photoshop due to a pc crash but now I've reinstalled I can 't view my files in mini bridge. Bridge itself is fine. Do I need to reset something? Thanks

  • Launching Difficulty, DVDSP trying to find purposely deleted file

    I recently deleted some .mov files from my external drive to free some space. Since then, I have been unable to work in DVDSP because as soon as it launches, a window pops up that reads, "Searching for movie data in file "Horses_1". When I push the p

  • No audio devices available in late-2013 iMac

    Updated Mavericks to 10.9.1 yesterday. Today there are no analog audio devices available for output.  Airplay devices work normally. I have reset PRAM, disconnected all peripherals etc.  Have tried connecting audio devices to the 3.5mm output jack. A

  • First post but hey

    ok this is my first post here, i have mainly been a lurker looking around see what problems can be resolved by what methods... (my specs are at the bottom of my post) the only problem that I seem to have is with HitMan 2, which i have not found a sol

  • Script to change keyboard modifer keys?

    I'm trying to create a login script to use with Workgroup Manager that will allow me to change the keyboard modifer keys on a client machine. I've done a search and found a few scripts but they don't seem to work. For example the following script: te