V210 bad fan - Identify which CPU physically is the one involved

I have a V210 server.
One of the fans for the CPU's has failed. I want to replace it (have the replacement part) but I don't know physically which CPU is the one that is effected. I have a admin guide, but it doesn't show the internals of the machine, just normal replaceable parts.
The error:
CPU_FAN @ MB.P0.F0.RS has FAILED
Indicates it is the Motherboard CPU 0 fan, but there are 2 CPU's in the box. Which one is CPU 0 and CPU 1?
How do I tell? Cant seem to find a diagram of the box internals to differentiate between the various CPU's
Output from showenvironment:
Fans (Speeds Revolution Per Minute):
Sensor Status Speed Warn Low
F0.RS OK 8544 -- 1000
F1.RS OK 8333 -- 1000
F2.RS OK 8437 -- 1000
F3.RS OK 8544 -- 1000
MB.P0.F0.RS FAILED -- 2000 2000
MB.P0.F1.RS OK 17763 2000 2000
MB.P1.F0.RS OK 16875 2000 2000
MB.P1.F1.RS OK 17307 2000 2000
Edited by: 804736 on Mar 5, 2011 10:19 AM

Found a PDF which is for replacing the cpu fans... Document ID 817-4048-13.pdf
URL which most likely will change
[http://download.oracle.com/docs/cd/E19088-01/v125.srvr/817-4048-13/817-4048-13.pdf]

Similar Messages

  • How to identify which key figure will the numeric pointer for deltas?

    Hi All,
    I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
    how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
    Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
    Thanks
    Pooja

    Pooja,
    If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism. 
    A time stamp would be the better one to use.  In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
    Moreover, a delta would be based on a character, preferably a time char.
    In your requirement, try to figure out the character on whichdeltas will be based.
    Sasi

  • How to identify which applicarion is using the DVD burner?

    How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

    I think you'll find that the application is Final Cut Pro...  the message is bug.  I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
    As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
    This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
    this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
    If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
    hope this helps.

  • Why can't I make a purchase from my new IPod using a new credit card which is different from the one registered with my apple account ?

    Why can't I make a purchase from my new IPod using a new credit card which is different from the one I have registered with iTunes before ?

    You can only use one credit card to one Apple ID.

  • I bought iphone 5 in september last year and the whatsapp which I installed was free of cost.The number which I used is the one I was using in my android phone and validity for its expiring in april but for other users its lifetime free.how can I get it ?

    I bought iphone 5 in september last year and the whatsapp which I installed was free of cost.The number which I used is the one I was using in my android phone and validity for its expiring in april but for other iphone users its lifetime free.how can I get the lifetime free validity?

    kratigupta wrote:
    how can I get the lifetime free validity?
    Huh? AFAIK, such does not exist. Read here:
    http://www.whatsapp.com/faq/general/23014681

  • How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro-.

    How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro (so that I can the save them in iTunes and then synchronize some of the videolectures to the iPad?)

    To set it up as POP you need to delete the account, reboot the phone by holding the HOME and SLEEP buttons at the same time until an Apple logo appears (about 10 seconds), then add it back following these instructions: Forcing creation of a POP or IMAP email account
    I understand that you have used the same account for many years, but the technology is also changing constantly. Years ago the standard was POP (Post Office Protocol), which was designed at a time when it was inconceivable that anyone would access their email from more than one device. When people started using multiple devices, for the most part they wanted to see changes on one device mirrored on another. A new standard, IMAP (Internet Mail Access Protocol) was developed. With iMAP the master copy of all messages resides on a server, and multiple devices are kept in sync with the server. So if you delete a message from one device it is removed from the server, and then removed from all other devices when they next sync. This is the same way Microsoft Exchange works. Other benefits of IMAP include the ability to have multiple mail folders that are kept in sync across devices. In your case you could use this to create a separate folder for each family member, so they could move messages to their own folder and not clutter up the shared Inbox. Most computer mail readers can even automatically sort incoming mail into folders based on the contents of the message.
    IMAP is considered a "higher level" standard than POP. When you create a mail account iOS devices query the server and ask what it supports; if it says it supports IMAP then the account is automatically configured for IMAP. So if you really want POP you must fool it, as described in the link above. In my experience Android devices default to the highest level protocol also, and I suspect newer Blackberries do (although it has been 15 years since I used a BB).

  • Which MacBook model is the one for me?

    I am not fully able to decide which model should I pick. I have a budget of up to $1500, straight, so not a dime more. I am mostly taking into consideration the 13 inch Mid 2012 MacBook pro with Core i7 Processor, the 13 inch current MacBook Air model with Core i7 processor, or this or mid 2012  13 inchRetina MacBook Pro Model. Which are the advantages of each one? Which one would you/did you choose? I should note that I mostly do not care about the battery life, as I would mostly be using it on a charger anyway.

    The NEW macbook Pro and Air are EXTREMELY close in form factor
    The newest macbook Pro is essentially a larger macbook Air with Retina display and options for speed in increasing prices up to an independent graphics and quad core processor.
    both Air and new Pro now have PCIe SSD and permanent RAM.
    The Air is the lightweight portable form factor, fast to boot and shut down, but with longer battery life than any of the macbook pro in 13"
    Now the new macbook Pro and macbook Air are extremely close in form factor and nature.
    both have 802ac wifi
    both have permanent RAM, no superdrive
    both are slim profiles and SSD
    The only real differences now are (in the most expensive Pros) faster processors and quadcore processors and top end model autonomous graphics.
    ....and of course the retina display
    both are now "very good for travel"
    Other than features the form factor of the Air and Pro are VERY close now,....so now its merely a matter of features and price more than anything.
    You need an external HD regardless of what you get for backups etc.   Drop into an Apple store and handle both and make your choice based on features, such as Retina or non-retina, .... both at a distance now look like the same computer.
    The Pro weighs more, ....but nowhere near what it used to just a month ago on the older macbook Pros
    The NEW macbook Pro is a different creature entirely than the older macbook Pro, .....the new Pro is thicker than the Air, but id frankly call the NEWEST Pro a "macbook Air with Retina display"
    Instead of Air VS Pro now,.....its really a smooth transition from Air to pro without comparing say, 2 different creatures, now its like contrasting a horse from a race horse.

  • HI, I would like to use GPS with I Pad for navigation when I am trekking.  I will need to download maps in order to do this.  Can anyone tell me which I Pad is the one to purchase?  Thanks, Dave

    HI,
    I would like to use an I Pad for navigating when I am trekking in the UK and in Europe.  I would also like to download local maps.
    Does anyone know which I Pad will support GPS Navigation?
    Thanks
    Dave

    Wi-Fi only iPads do not have the GPS chip and rely on inaccurate methods to determine location. So a cellular iPad is a must even if you do not set up a cellular data account.
    Also downloaded maps take up space on the iPad. So I would suggest that you consider an iPad with storage greater that the base model.

  • Which index file is the one i upload my changes in, the .asp or the .shtml file?

    CAN SOMEONE HELP ME IN UNDERSTANDING WHICH INDEX FILE I SHOULD UPLOAD MY CHANGES IN FOR MY HOME PAGE, THE .ASP OR THE .SHTML FILE?  I HAVE PUT IN MY CHANGES IN BOTH FILES, HOWEVER, WHEN I F12 MY CHANGES IN THE .ASP, I ONLY GET THE OPTION THE SAVE AND THEN OPEN THE FILE, AND NOTHING HAPPENS.   WHEN I F12 MY .SHTML FILE, ALL MY CHANGES WORK WITH THE EXCEPTION OF MY WEBPAGE BACKGROUND WHICH IS ON ALL MY PAGES.  I NEED THE BACKGROUND TO SHOW UP AS IT IS ON THE WEBSITE NOW, WITH MY CHANGES, SO I NEED SOME EXPERT ADVICE TO HELP ME WITH THIS.
    THANKS,
    rod_sha

    Sorry guys, for the all caps question.  I'm new at this and only know some of the simple things to do to update the home page.  I am updating a good friend of mine, Mike Glenn's webpage.  I have posted a image and a video on the index.shtml page that we are trying to let viewers and possible investors see the movie we are trying to do on Mike Glenn.  I used vimeo to upload the video and used the code it supplied for the link to the movie.  Mike's website is www.mikeglenn.com.  Being new at trying to make changes to his home page, I wanted to make sure that the index.shtml file was the right file to use.  Everything on the page works but his background does not show up when I do F12 to look at my changes before I upload them.  I've looked at the code on the website, and the only thing that is different from his web page is the items I'm trying to upload.  That's why I'm puzzled about the background.  Any help on fixing this and understanding why I don't see his background would be greatly appreciated.  I'm needing to get it updated as soon as possible in order for us to get the funding for completing the movie on Mike.  Mike Glenn is a former NBA player that played here in Atlanta for the Atlanta Hawks.  He has a free basketball camp for the Deaf and Hard of Hearing that has been going on now for 33 years.  The movie is about how he started the camp and his love for the Deaf community.  Both the .asp and the .shtml files start with index.  I would like to thank you guys for responding to me. If you need to contact me, I can be reached on my cell at 404-433-0838 or e-mail at [email protected]
    Sincerely,
    Rodney Terrell

  • How to identify which trace file is your backup controlfile trace in udump

    I have a 10.2.0.3 database on unix.
    I want to setup a job to run a script every night to backup the controlfile as text format.
    such as "alter database backup controlfile to trace".
    How my script can identify which trace file is the one just created for backup controlfile and copy the file to a backup disk?
    Thanks a lot!

    I thought it's
    alter database backup controlfile to trace as 'absolute path of any file where you want the control file in clear text format ';
    for ex. in Windows..
    alter database backup controlfile to trace as *'c:\temp\create_ORCL_control.sql'*;
    This way you will know where your job is going to backup controlfile to trace

  • Bad Fan in 2801 Router

    Hello Cisco Community, Looks like I have a bad FAN supply on a 2801 router. I wanted to know if need to RMA the whole Chassis or if i can replace it with a 2811 fan supply (ACS-2811-FAN-1/2)? 
    Thanks,
    Sergio

    You open an RMA base on the serial number of the chassis.  Give the TAC engineer the error message which states you've got a bad fan and they'll send you the replacement fan plus the instructions about how to replace the fan.

  • Identifying which part of stored procedure is taking long time

    Hi Everyone,
    I have a stored procedure which is taking long time to execute.  I am trying to understand which part/query in the stored procedure is taking long time.
    It involves lots of table variables and n no of queries .Could anyone please help me in how to identify which query/part of the stored procedure is taking long time to execute?
    Thanks in Advance

    Hi Vivek -
    I am only familiar with running the plan visualization for a single SQL query.
    Could you please guide me how to run it for a procedure.
    Thanks in Advance.

  • Multiple triggring events - How can you identify which one started the wf?

    Hi all,
    I would like to know if there is a way of identifying which triggering event started the wf.
    The situation is like this: i have a workflow that can be started by one of 6 triggering events (6 different situations for vendor master data - creation needed, extension needed, change needed and so on). I have to do different steps inside the workflow function of which event actually triggered the wf.
    Is there a container element that gets some sort of identification for the event that actually triggered the wf?
    I found a container element that holds the name of the event but it's a multiline container element (so i guess it holds all the event names) and i can't use it in a multiple condition.
    Thank you
    Cristina

    for those events, you can add want you want as abap dictionary
    it doesn't matter, just look in SE11, where you can find any kind of data element of type char1 and use that one.
    Those events, are those standard events or events that you trigger yourself with the function SWE_EVENT_CREATE?
    Edited by: Kristof De Bruecker on Mar 24, 2010 2:56 PM

  • How to identify which Hub is at 0x4b300000

    Most recent instances;
    2/18/12 9:13:19 PM kernel USBF: 160.386 AppleUSBHubPort[0xb52b200]::FatalError - Port 4 of Hub at 0x4b300000 reported error 0xUSBF: e00002eb while doing 160.setting port power
    2/18/12 9:13:35 PM kernel AppleUSBHubPort[0xb533500]::FatalError - Port 4 of Hub at 0x4b300000 reported error 0xUSe00002eb while doing BF: setting port power
    2/18/12 9:13:39 PM kernel 354 AppleUSBHubPort[0xb52b400]::FatalError - Port 4 of Hub at 0x4b300000 reported error 0xe00002eb while doing setting port power
    as we have  several hubs attached to this machine we are hoping it is possible to identify which hub is causing the problem based on 0x4b300000 address. Yes; no; how to?
    Open to any suggestions.
    Thanks in advance!
    ciniod
    ps What happened to the nice easily searchable discussions of old where we could find simililar problems based on question?

    Hello,
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>USB, expandthe triangles at the top right pane, select a Hub, you should see something like this...

  • X61 fan error - is there a way to identify which fan it is happening from???

    My 7675-CTO X61 is giving me a fan error. 
    I have read the forum and am pretty sure I can replace the fan.
    However, how do I figure out which fan is giving me the fan error?
    Is there a way to figure this out?
    I need to know whether it is the main cooling fan (which is also called the CPU fan and Fansink I believe - correct me if I'm wrong) or the second fan in order to order the appropriate parts for this.
    Any help is appreciated. Thanks.

    I believe there is no way to tell, but I have found that if there is a second fan, the 2nd (little) one tends to be the problem. I keep a lttle fan around and always try it first because it is much easier to change

Maybe you are looking for