V240 Hangs at loading runtime image

Hi everyone, I'm new to Sun systems and i'm trying to setup a Sun Fire v240 server. I'm trying to connect to the server using windows hyper terminal, and the connexion cable supplied by Sun (RJ45 + DB9 adapter). When i connect the server to the power supply i get some messages (see attached file), but the process hangs up at the "Loading the runtime image..." phase (can't enter any command). I waited a max time of 15min, but it just wouldn't proceed. anyone can help? Thanks in advance.

I have a similar problem but the system doesn't hang but reboots.
I see:
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.3.0
ALOM Build Release: 006
Reset register: e8000000 EHRS ESRS LLRS CSRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.3.0
ALOM Build Release: 006
Reset register: e8000000 EHRS ESRS LLRS CSRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
and then it reboots again.
Would this be the same hardware problem? I seems to have something to do with the motherboard, but is there something that can be changed without buying the whole motherboard?

Similar Messages

Windows 7 Professional PC hangs at "Loading files" when trying to boot with custom capture image on Windows Deployment Services.

I have created a custom capture image in WDS. Now when I try to boot my reference PC into this image the PC hangs at "Loading files". The reference PC is running Windows 7 and I am using Windows Server 2012 Standard on my server.
I have followed the instructions on how to create the custom capture image on the server to a fault. I PXE boot the PC and it shows the capture images after I hit F12. The problem is that it starts to boot and then hangs about 2/3 way through the progress
bar.
Any help would be appreciated.

Hi Derrick Logan,
We need know the detail phases your client hang, if it is irregular status, please collect the WDS log then post it. You can refer the following similar thread solution first.
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
Windows is loading files... Hangs on WDS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baacadc4-830d-43e1-ace8-3292e886958e/windows-is-loading-files-hangs-on-wds?forum=winserversetup
WDS hangs at "Windows is loading files..." on a LAM jhl91 laptop
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ebb6e0b-9f05-4fee-b3c0-129c34bb879d/wds-hangs-at-windows-is-loading-files-on-a-lam-jhl91-laptop?forum=winserversetup
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to load TIF images into Photoshop.

CS4 (11.0.2) and Windows 7 Home Edition.
Have developed a problem trying to load some TIF images into Photoshop. I have a large number of images archived over a decade or more. At this point it may some of the older files that exhibit the problem. Now all these files were edited and stored using the Photoshop versions during the complete time period. The files are always saved with no compression. Have tried to load from Photoshop and clicking on the file in a file list. Photoshop just hangs and I get the message Program not responding. I can take these same files and load them into the ROXIO photo editor with no problem. Stranger yet is if I simply load the file into the ROXIO editor then "save as" back into the same folder (overwrite) the file can then be brought into Photoshop with no problem! Any ideas?

Noel,
Will try to keep short.
I reinstalled Photoshop CS4 from the cd CS set. Did not uninstall first. Restarted PC and Photoshop. Still failed the same way with a 3001 image.
Did the following, changing one item in the Edit->Preference->GPU Setting. After each change, closed Photoshop, reopened, brought in 3001 image, restored original setting. 3001 failed each time.
* Unchecked Enable OpenGL Drawing
* Advanced setup: Unchecked Advanced Drawing.
* Advanced setup: Unchecked Color Matching
Next went to the Edit->Color Profile.
Scanned thru options and saw in the Convert Options: Engine. It was set to Adobe (ACE). ACE was the module name in the error detail!
Only other option for this is Microsoft ICM. Changed to that, close/open Photoshop and 3001 came in no problem. So did the Nikon 3000, srgb IEC 61922 2.1 and Untagged. However, when briging in an Adobe RGB(1998) image Photoshop notes Profile Mismatch. It allows me to decide what to do (use embedded profile instead of workspace; convert color to work space color; discard embedded profile. and I choose use the convert color and it loads ok. At least it loads the image! Will use this approach for now. I need to get educated on color profiles!!
Joe

Best Practice - load external image including rollovers

I am attempting to use the loader component to load an
external jpg, but experience issues having my flash app
successfully load a roll-over image from an external source when
the user rolls over the intital jpg. I am not a flash developer
(actually a .net developer trying to help a graphics guy out).
I started with the loader component, converted it to a movie
clip and then utilized the on(rollover) and on(rollout) events to
change the loader component's contentPath property at runtime via
ActionScript. I am not getting consistent results with this
strategy - what is the best way to accomplish this? Also note I
tried converted to a button, which seemed more logical, but the
loader component doesn't seem to like being converted to a button.
Regards,
Daflookie

Daflookie,
> I started with the loader component, converted it to a
movie
> clip and then utilized the on(rollover) and on(rollout)
events
> to change the loader component's contentPath property at
> runtime via ActionScript. I am not getting consistent
results
Check out the Loader class in the Components Language
Reference. Loader
extends MovieClip, so there's no need to convert to a movie
clip symbol. In
addition, I recommend scrapping on() in favor of MovieClip
events, which
will probably be closer to your .NET point of view that the
older
on/onClipEvent approach to event handling (those are Flash
5-era).
Honestly, though, if you simply want to load images, I would
forego the
Loader component (no need for all that overhead) and use
MovieClipLoader to
load your images into the user's Internet cache. You'll see a
good handful
of events under that class listing as well (see the
ActionScript 2.0
Language Reference).
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

How to remove flickering in a animation done by loading different image files

Hello Everyone,
I have done a character animation by loading multiple images one after another at runtime or dynamically by accessing files from there path directly.
But the problem I am facing is, I am getting a white bg or delay when the images change, it kind of feels like the images are flickering. How can I get rid of this flicker.
Thank you.
Iceheros

When loading images from a server during runtime you can never be sure that there will be no delay.
What you could do is write a function, that checks with a progress Event how much of the next picture is loaded and base the percentage of the current pictures alpha channel on this figure.
Say the progressEvent from your Loader returns a number like 0.1....1.0 (10%...100% of the next picture are loaded)
Then in an eneterframe you could use that number to modify the current Pictures alpha (like img.alpha = 1.0- progress);
A clear disadvantage is, that the tweens will always be different (depending on picture size/network traffic)

Loading external Images in MovieClips

Dear All,
I am trying to load the external images in Dynamically
created Movie Clips.
Can you please help me out from this.
I am trying something like this:
Container_mc.image_mc ( I want to load the Images inside the
imag_mc clip)
Regards,
Sridhar B
Container_mc.image_mc
imag_mc

Hi,
Following is my problem:
I am trying to trace the "idValue" property on runtime but it
is showing error. Can you please tellme how add Images and
properties runtime.
var loader:Loader = new Loader()
addChild(loader)
loader.load(new URLRequest("images/01.png"))
// Assigning a value to idValue property
mc_mainSWF.idValue = 40
mc_mainSWF.addChild(loader)
mc_mainSWF.addEventListener(MouseEvent.CLICK, checkID)
function checkID(event:MouseEvent)
// And i am geeting error here
trace(event.target.idValue)
Regards,
Sridhar B

Slow loading of images

When I go to a web page with lots of images (basically, all of them) Safari loads the text portion of the page promptly, then hangs up and waits and after an excruciatingly long time will give up and load question marks for all the images. If I reload the page the images immediately load properly. Sometimes I'll stop the loading process while it's hung up, and reload the page, and again all images appear fairly promptly. Anyone else having this problem? It helps to empty the cache and clear the history, but I can't do that every time I load an image heavy page. Any ideas?
iMac Mac OS X (10.3.4)

Hi Elaine,
Welcome to Apple Discussions
Two areas to check:
Safari Preferences>Appearance panel. Make sure the "image load" selection is checked. If not, do so, then try a page load again.
Otherwise, go to your System Preferences>Network>TCP panel. There, enter 4.2.2.1 and 4.2.2.2 (separate lines) in the DNS servers box. Then select "apply".
Restart Safari and try the page load again.
I notice your tag says 10.3.4. Is this correct? Latest version of OS X Panther is 10.3.9, which would give you an upgraded version of Safari (v 1.3.2). You can upgrade via Software Update in System Preferences. If you do this, do not use the computer during the upgrade process. After finished, make sure you "repair permissions" using Disk Utility>First Aid Panel ini your Utilities folder.
Post back
Message was edited by: Hawaiian_Starman

Loading large images

Hi there,
I'm facing lot of problem while loading large image (25+ MB JPG/TIFF) in editor pane using ImageIO. I always get OuofMemory exception or my machine (p4 2.4ghz/512 ddr) get hangs. Is there any way to load large images within a moment in Java? I have seen one s/w (written in vc++) that do the same. I'm trying to replicate that s/w.
Is there any 3rd party Java API to do the same? Have you guys develop similar s/w before?
I've tried many ways: by changing heap size, using ImageMagick, spliting the image, etc. but never get satisfactory results.
Any help would be appreciated.
Thanks in advance.
-tamal

You can use Java Advanced Image
http://java.sun.com/products/java-media/jai/downloads/download-1_1_2.html
this will avoid the out of memory error.
I use it to read and show 20K*20K pixel images.
the loading is immadiate.
If you use javax.media.jai.widget.ScrollingImagePanel (deprecated) class to visulize the image is quite quick.
Obviouse that if you want to visualize the entire image you will need to wait an approprite time for rescaling it.

IWeb 09, Pages 09, and Keynote 09 can't load iPhoto images in media browser

Ever since yesterday, my iWeb 09, Pages 09, and Keynote 09 have been experiencing problems loading iPhoto 09 images in the media browser. I have no problems loading my audio files, movie files, and widgets, but when it comes to iPhoto picture files, the system just hangs. Luckily, it doesn't crash; it just says "Loading iPhoto images" forever.
I'm guessing that the problem is with iPhoto 09, because the media browser has no problems loading my Aperture picture files.
Does anyone have any ideas how I can get iWeb, Pages, and Keynote to load my iPhoto pics in the media browser?
Thanks!

1. Quit iPhoto.
2. Go to your Pictures Folder (or where ever you have your Library) and find the iPhoto Library there (Your Donor Library).
3. Right Click on it, and from the resulting menu select ‘Show Package Contents’. A Finder window will open and the Library will be exposed.
4. Find the following files
AlbumData.xml
AlbumData2.xml
and move them to the desktop.
5. Close up the Library and restart iPhoto. This will force iPhoto to rebuild those files which are key to sharing.
Then restart the other apps and see does that help.
By the way: where is your Library? On the Start Up Disk? On an external?
Regards
TD

Loading an image in to createImage()

Hello, I am trying to load an image in to the createImage() method so that I can rotate it on a panel (without the whole panel rotating!!). Basically I just want to copy all the pixels from one image and paste them in to another.
Hope someone can help
Andrew
Btw, why do I get a runtime error with image.getGraphics() when when intialising an image using getImage(getDocumentBase(),filename) ?

You have the Image object? If so...
      * Rotates the specified image the specified number of degrees. The
      * rotation is performed around the center point of the image.
      * @param img         the image to rotate
      * @param degrees     the degrees to rotate
      * @param bbm         the bounding box mode, default is EXACT_BOUNDING_BOX
      * @param background the background paint (texture, color or gradient),
      *                     can be null
      * @return the image
      * @see #NO_BOUNDING_BOX
      * @see #EXACT_BOUNDING_BOX
      * @see #LARGEST_BOUNDING_BOX
     public static BufferedImage rotateDegrees(Image img, double degrees, int bbm, Paint background) {
          return rotateRadians(img, Math.toRadians(degrees), bbm, background);
      * Rotates the specified image the specified number of radians. The
      * rotation is performed around the center point of the image. This
      * method is provided for convenience of applications using radians.
      * For most people, degrees is simpler to use.
      * @param img         the image to rotate
      * @param radians     the radians to rotate
      * @param bbm         the bounding box mode, default is EXACT_BOUNDING_BOX
      * @param background the background paint (texture, color or gradient),
      *                     can be null
      * @return the image
      * @see #NO_BOUNDING_BOX
      * @see #EXACT_BOUNDING_BOX
      * @see #LARGEST_BOUNDING_BOX
     public static BufferedImage rotateRadians(Image img, double radians, int bbm, Paint background) {
          // get the original image's width and height
          int iw = img.getWidth(null);
          int ih = img.getHeight(null);
          // calculate the new image's size based on bounding box mode
          Dimension dim;
          if(bbm == NO_BOUNDING_BOX) {
               dim = new Dimension(iw, ih);
          } else if(bbm == LARGEST_BOUNDING_BOX) {
               dim = getLargestBoundingBox(iw, ih);
          } else { // EXACT_BOUNDING_BOX
               dim = getBoundingBox(iw, ih, Math.toDegrees(radians));
          // get the new image's width and height
          int w = dim.width;
          int h = dim.height;
          // get the location to draw the original image on the new image
          int x = (w/2)-(iw/2);
          int y = (h/2)-(ih/2);
          // need to copy the given image to a new BufferedImage because
          // it is, in most cases, going to be a larger image so it
          // needs to be drawn centered on the larger image
          BufferedImage bi = new BufferedImage(w, h, BufferedImage.TYPE_INT_ARGB);
          Graphics2D g2d = bi.createGraphics();
          // set some rendering hints for better looking images
          g2d.setRenderingHints(renderingHints);
          // draw the background paint, if necessary
          if(background != null) {
               g2d.setPaint(background);
               g2d.fillRect(0, 0, w, h);
          // if not rotating, just draw it normally, else create a transform
          if(radians == 0.0) {
               g2d.drawImage(img, x, y, iw, ih, null);
          } else {
               g2d.rotate(radians, w/2, h/2);
               g2d.translate(x, y);
               g2d.drawImage(img, 0, 0, iw, ih, null);
          g2d.dispose();
          return bi;
      * Gets the largest bounding box size that can hold an image of the
      * specified size at any angle of rotation.
      * @param width   the image width
      * @param height the image height
      * @return the bounding box size
     public static Dimension getLargestBoundingBox(int width, int height) {
          // The largest bounding box is the largest area needed to fit the
          // specified image at any angle or rotation. This is simpler then
          // getting the bounding box for a given angle because the largest
          // box will put the corner of the image box directly along the
          // vertical or horizontal axis from the image center point. The
          // distance between the image rectangle's center and any corner
          // is the hypotenuse of a right triangle who's other sides are
          // half the width (a) and half the height (b) of the rectangle.
          // A little a^2 + b^2 = c^2 calculation and we get the length of
          // the hypotenuse. Double that to get a square within which the
          // image can be rotated at any angle without clipping the image.
          double a = (double)width / 2.0;
          double b = (double)height / 2.0;
          // use Math.ceil() to round up to an int value
          int c = (int)Math.ceil(Math.sqrt((a * a) + (b * b)) * 2.0);
          return new Dimension(c, c);
      * Gets the optimal/smallest bounding box size that can hold an image of
      * the specified size at the specified angle of rotation.
      * @param width   the image width
      * @param height the image height
      * @return the bounding box size
     public static Dimension getBoundingBox(int width, int height, double degrees) {
          degrees = normalizeDegrees(degrees);
          // if no rotation or 180 degrees, the size won't change
          if(degrees == 0.0 || degrees == 180.0) {
               return new Dimension(width, height);
          // if 90 or 270 (quarter or 3-quarter rotations) the width becomes
          // the height, and vice versa
          if(degrees == 90.0 || degrees == 270.0) {
               return new Dimension(height, width);
          // for any other rotation, we need to do some trigonometry,
          // derived from description found at:
          // http://www.codeproject.com/csharp/rotateimage.asp
          double radians = Math.toRadians(degrees);
          double aW = Math.abs(Math.cos(radians) * width);
          double oW = Math.abs(Math.sin(radians) * width);
          double aH = Math.abs(Math.cos(radians) * height);
          double oH = Math.abs(Math.sin(radians) * height);
          // use Math.ceil() to round up to an int value
          int w = (int)Math.ceil(aW + oH);
          int h = (int)Math.ceil(oW + aH);
          return new Dimension(w, h);

10.5.5 Installation - hangs at desktop background image - Safe Boot?

Used the updater to install 10.5.5. A number of additional updates came down and all seemed to install fine. The 10.5.5 update did not install and provided an error. I tried again and on restart the system hangs at the desktop image. It gets past the grey apple screen and loads the desktop image. A small mouse arrow pointer comes up that I can move around but that is far as it goes. This is an iMac 24" with 4GB RAM.
Is there an option where I can "Safe Boot" and roll back the attempted installation? I have a time machine disk that I will unplug - but how can I recover from that if there is no "safe boot" option?

I've spent a lot of time digging around in the guts of OS X, Tiger and Leopard both. There is no magic
going on in there. If the right files are present and working and the caches and boot files are
functional, the OS works, if not you have problems or the OS quits working.
+"Apple tells us those messages are accurate but can be ignored. What makes you think their+
+absence is a sign that the updates have been properly registered with the database that keeps+
+track of such things?"+
Definition: SUID (set user ID):
The SUID permission causes a script to run as the user who is the owner of the script, rather than the user who started it. What the SUID warning message is saying is that according to the install
database, the information the database has about that file (file size, modification date, checksum,
etc.) is different from the actual state of the file as it now exists on your hard drive. Because a
"SetUID root" (in other words, an executable file whose owner is "root" (aka system) and who has
its SetUID bit set) executable file has the power to run as root right as you launch it, you need to
be very careful about setting the permissions on files so that you create SetUID root executables
willy nilly. The warning means that because the executable is different from what Disk Utility
expected, it's not going to try to verify or repair the permissions on that file.
How did it get that way? A glitch in the install program and/or a file was locked and didn't get
updated properly during the update process.
+"Apple tells us those messages are accurate but can be ignored. What makes you think their absence is a sign that the updates have been properly registered with the database that keeps track of such things?"+
Well just for grins, I opened up a 10.5.5 combo update, the /library/receipts/db/a.receiptdb file
and compared the following files mentioned in this typical DU permissions repair warning:
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Using Pacifist, I compared the permissions in the 10.5.5 combo receipt database file and 10.5.5
combo update package against the actual files on the hard drive.They were all indeed identical.
I extracted the files to the desktop from the combo update, loaded them into hex fiend, loaded
the matching files from my hard drive into hex fiend and compared them. They were identical
in size byte for byte and in data with the 10.5.5 combo update.
I will continue to use my method, for I found that none of the discrepancies that you claimed
may exist did not in fact exist.
Kj

K8N Neo2 hang at decompressing BIOS image to ram. HELP!

Hi,
After several days of flawless running, my computer just died today.
My computer hang at "decompressing BIOS image to RAM for fast booting" (indicated by the D-bracket LEDs) during the startup. I have tried the following but nothing helped.
1) clear CMOS jumper by shorting pin 2 and 3
2) clear CMOS by removing the battery
3) remove the CPU and put it back in
4) take the memory out and put it back in dual/single channel mode.
After pushing the power button, I observe through the LEDs that the mb doing the following
1) System power on
2) Memory Detection Test
3) Decompressing BIOS image to RAM for fast booting and stuck!
Any suggestions is welcome!!
My computer config:
AMD64 3200+ 90nm
MSI K8N Neo2
Bios V1.4
Mushkin basic 512MBx2 (2.5-3-3)
VisionTek Xtasy 9600XT 256MB
Seagate 200GB PATA
Antec Sonata case with 380W power supply

I'd try horspowr1001
with a single module in slot 1
then just for fun
How to clear the CMOS
1) disconnect the power cable.
2) push the power button to drain the capacitors
3) Move the CMOS jumper to the clear position, from it's original 1-2 position to 2-3
4) Wait a minute to be sure the CMOS has been cleared. Take your Time
5) Return the CMOS jumper to it's original position 1-2
6) Plug in power cable.
7)restart computer
8) enter bios and select load optimized Bios defaults - save & exit (hopefully)
9) let pc reboot, Enter Bios Change Ht 5--->4
luck

Error While loading a image from database

Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
Nats

Hi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!.

How do I run a simple script that loads an image into photoshop CS - CS4?

Hello,
I am at a loss on how to get my simple application to work. I have a small desktop air application that simply opens Photoshop and runs an action. I used switchboard and the application ran great on PC and MAC. However it only worked for CS3, and CS4 not CS or CS2?. Plus the size of switchboard was a bit large for my small app. I am willing to live with that though . I am using Air with Flex and wanted to know if perhaps there is a beter approach? All the application does is open photoshop, loads an image, and runs an action. Can I do this for all versions of Photoshop using switchboard? Can I do this without switchboard and just use javascript. The big issue is the Air app needs to open Photoshop, and most of the examples have me open PS first and then execute a script located in the PS directory. This needs to work outside of the PS directory. Any examples are appreciated.
I have looked at the following:
- SwitchBoard : only works for CS3-CS4 (on my tests)
- PatchPanel: same issue, plus seperate SDKs
- ExtendScript: requires script to be run from PS not Air

Hello,
I am at a loss on how to get my simple application to work. I have a small desktop air application that simply opens Photoshop and runs an action. I used switchboard and the application ran great on PC and MAC. However it only worked for CS3, and CS4 not CS or CS2?. Plus the size of switchboard was a bit large for my small app. I am willing to live with that though . I am using Air with Flex and wanted to know if perhaps there is a beter approach? All the application does is open photoshop, loads an image, and runs an action. Can I do this for all versions of Photoshop using switchboard? Can I do this without switchboard and just use javascript. The big issue is the Air app needs to open Photoshop, and most of the examples have me open PS first and then execute a script located in the PS directory. This needs to work outside of the PS directory. Any examples are appreciated.
I have looked at the following:
- SwitchBoard : only works for CS3-CS4 (on my tests)
- PatchPanel: same issue, plus seperate SDKs
- ExtendScript: requires script to be run from PS not Air

Extension Manager CS6 hangs on "Loading Extensions" and I cannot uninstall it.

Hello,
I've been having trouble with extension manager cs6 for about two days now, trying to apply patches to it to make it run more smoothly and stop hanging on "Loading Extensions". I have looked through these forums and they suggested that I remove all mxi files from a subfolder called "EM Store", but I cannot find a EM store under the proper location. I also cannot uninstall extension manager from my control panel, as it does not show up. I am just trying to get keyframe caddy for Adobe Flash, but I cannot get it without extension manager which is a giant pain. I've seen other people post both of their log files, but I think that just makes these forums impossible to find any real answers, as the majority of it is the log file. Please help asap, as I need this project that I am doing to be done fairly quickly.
Short story:
1. Manager hangs at "Loading Extensions"
2. Tried patching with updates, did not work
3. Tried finding the two subfolders, cannot find them at all in proper location
4. Cannot uninstall it from control panel
5. Need Help asap

You should delete EM Store and Database, then try again, you can find these folders under following path:
Current Machine's Extension Manager CS6 folder: C:\ProgramData\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
Current user's Extension Manager CS6 folder: C:\Users\<your_user_name>\AppData\Roaming\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
For the 'AppData' is a hidden folder, you could follow this guider (http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/) to unhidden it

V240 Hangs at loading runtime image

Similar Messages

Maybe you are looking for