V32 iOS 8 Error: The library can not be updated

Hi,
our customers have this error message after open an app v32:
Knihovnu nelze aktualizovat
Došlo k chybě
in english: The library can not be updated
An error has occurred
This error is only when iPad is setup to czech language.
When we setup to english language, app is open normally...
And then is app open normally in czech language too.
Any help pls?
Thank you
Tomas
P.S. v32 was made and send to App Store 22. 9. 2014

I did a search on Google for Error -39, and it suggests 2 things. Installing the latest version (which is sounds like you have) and turning OFF web accelerators if there are any running...
http://docs.info.apple.com/article.html?artnum=44000

Similar Messages

I keep getting an error The ipad can not be synced because the sync session failed. same error for my iphone. any ideas?

I keep getting an error The ipad can not be synced because the sync session failed. same error for my iphone. any ideas?

Try deleting iTunes from your computer. Do not delete your iTunes library. Then download and install a fresh copy if iTunes. Reboot your computer after installation of iTunes.
Then reboot your phone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
Reconnect the phone to your computer running iTunes and see if the sync process will go through.

TS3694 upgrade from 4.3.3 to 5.1.1 b208 gives an error " the iphone could not be updated because the firmware is not compatible"

I recieved an error while trying to update from ios 4.3.3 to 5.1.1 b208 the error:" the iphone could not be updated because the firmware file is not compatible"

This often happens when iTunes is not up to date. Try updating iTunes to the latest version, then try updating your phone again.

New ipod touch, Error: "The device can not be read or written to."

I don't know what else to do!
I also have an Ipod touch that just doesn't sync. When I connect the Ipod and launch Itunes to sync, it tells me that the device can not be written to:
It just doesn't snyc at all. It's brand-new, out of the box and just doesn't work. And it's not my first ipod, so I know how to handle Itunes.
That's what i've tried so far without success to solve the problem:
* restored the touch hundreds of times, both in recovery and DFU mode and within the touch software
* upgraded to firmware 1.1.4, downgraded back to 1.1.3, then to 1.1.2. and back to 1.1.4 - no change!
* installed several different ITunes Versions and different Apple Mobile Device Services
* tried MediaMonkey BETA with Ipod Touch support (this just creates 0kb files on the touch, but it also uses the mobile device service, so i guess the failure is somewhere there)
* tried 4 different Windows XP systems with Itunes at my home and at friends (same error there as well)
* restored my Windows XP with a recovery version and reinstalled Itunes completely from scratch
* created a new user account in Windows XP and tried it with this one
* launched Itunes with Internet switched off
* used different USB ports - both 1.1 and 2.0
* disconnected all USB devices
* registered the necessary DLLs manually
* last week, I sent the ipod to Apple (they claim that everything is fine and the problem is just me and my computer and sent it back without change)
I don't have an apple in reach, so i'm not able to test it with an apple computer. There is also no apple store here in the country side of Germany.
What else can be done? I know there are hundreds, that have the same problem but I don't know any more things to try. Now i have a 300 bucks touch i can not use as mp3 player...
Message was edited by: basti007

As I said, i did that! Quote:
+* last week, I sent the ipod to Apple (they claim that everything is fine and the problem is just me and my computer and sent it back without change)+
Today I got it back and nothing changed. I tried to call Apple Germany, but after i waited over 1,5 hours on the waiting line, i gave up.

Error : 'The Connection can not be used to perform thsi operation

Dear All,
I am getting an error like 'The Connection can not be used to perform thsi operation, it is either close or Invalid in this context.
Below is the code what am using:
Sub Select_Query()
Dim SQL_String As String
Dim rs As ADODB.Recordset 'This holds the data
Dim cn As ADODB.Connection 'Declaring Connection
Dim cmdobj As ADODB.Command 'Declare command Object
'Sheets("Payment").Select
Set cn = New ADODB.Connection
cn.Open ("Provider=MSDAORA;Data Source=MyDatabase;User ID=Prasad; Password=Prasad12;")
Dim count_value As Long
count_value = WorksheetFunction.CountA(Worksheets("Payments").Range("A:A"))
For i = 4 To count_value
SQL_String = Worksheets("Payments").Range("AA" & i).Value
Set rs = New ADODB.Recordset
rs.CursorLocation = adUseClient
rs.Open SQL_String, cn, adOpenForwardOnly, adLockOptimistic, adCmdText
Dim val As Integer
val = rs.recordCount
If val = 0 Then
Worksheets("Payments").Range("AZ" & i).Value = "No"
'Else
'Worksheets("Uploaded").Range("O" & i).Value = "Yes"
End If
cn.Close
Set con = Nothing
Next
'cn.Execute SQL_String
'con.Close
Set con = Nothing
End Sub
And select statment is picking one of the sheets, and SQL query is:
="SELECT sa.acct_id
FROM ci_sa sa, ci_sp sp, ci_sa_sp ss, ci_sp_geo spg,ci_acct_char cac
WHERE sa.sa_id = ss.sa_id
AND ss.sp_id = sp.sp_id
AND sp.sp_id = spg.sp_id
AND spg.geo_type_cd LIKE '%RR%'
AND spg.geo_val ='"&B4&"'
and sa.ACCT_ID=cac.ACCT_ID
AND cac.char_type_cd LIKE '%SDO%'
AND TRIM (char_val) IN ('"&Master!G9&"')"
Please help me in this..
Regards,
Prasad

Please, this is a Oracle forum, not a VBA forum. Mark this thread as answered and post it in a VBA forum.

Since upgrading my iPhone 4 to iOS 5 the spotlight can not find anything., Since upgrading my iPhone 4 to iOS 5 the spotlight can not find anything.

the spotlight can not find anything or any person form the contact list... by name, surname other details...

The same on my iPhone 4S with iOS 5.0.1. Must disable the in-Mail search option in General->Spotlight settings menu to make it work again, but you loose all the Mail indexing.

HT201413 HELP! I was updating my iphone 4S to the new IOS6 via itunes when in the in the middle of the process of actually updating the iphone OS, it suddenly returned an error - "The iPhone could not be updated. An unknown error occurred (1602)" PLEAS

PLEASE HELP!!!
I am using an HP DV9 laptop running Windows 7 Home Premium and the latest iTunes software.
I regularly synch my iphone 4S with my laptop & Outlook.
I recently got the message that an IOS6 upgrade is available & so I scheduled to apply the update.
Everything was running normally when, after the download of the update, backup of my iphone, & applying the update began when
suddenly, iTunes returned with an ERROR MESSAGE as follows:
The iPhone "Ramon's iPhone" could not be updated. An unknown error occurred (1602)
Now, my iphone is stuck with the iTunes icon and the USB image with an arrow pointing to the iTunes
icon.
WHAT DO I DO NOW?????!!!!!
Help PLEASE!!!!

I actually tried the steps below due to the error -5000 I had encountered during the previous tries updating my IOS to 5.1.1
"Perform a normal sync and check your iTunes to make sure everything was synced in the right places like the tabs at the top of your "summary" when you plug in your iPhone to iTunes. If everything is there and all the right boxes are checked for the stuff you want to save, then put your phone into recovery mode by keeping it plugged into your computer with iTunes still up and running. Next you want hold down the power button AND the home key button (the big button on the bottom part of your screen) AT THE SAME TIME. Your phone will go thru 4 different screens before you
Can let them go. U will see your normal power off slider screen, then a black screen, then a black screen with an apple logo, then finally a screen with the iTunes logo and a picture of a sync cable below it. Once you see this screen LET BOTH BUTTONS GO but not before you see this screen. Your computer will tell you that it has detected an iPhone in recovery mode, say ok. Then hit the restore button on your iTunes summary screen, it should then ask you if you want to restore from a backup and update, say yes.... And at the end of its restoring and uploading you should have iOS 5!!"
Then it proceeded to a reactivation process... =(

Error Message "iPod can not be updated.." but works after clicking away msg

Hi!
I have installed an German iTunes 6.0.4.2. and the newes IPod Software under WinXP.
After clicking " iPod Aktualisieren" I get the following message:
Der iPod "xxx" kann nicht aktualisiert werden. Ein unbekannter Fehler ist aufgetreten (-39).
Transl:
The iPod "xxx" cannot be updated. An unknwon Error has occured (-39).
After clicking away the messagebox everything sync's fine.
Whats wrong here? I have the problem for a week or so and already updated iTunes and the iPod software so far. And reset the iPod back to delivery conditions with the update tool. Nothing worked.
kind regards
marcus

I did a search on Google for Error -39, and it suggests 2 things. Installing the latest version (which is sounds like you have) and turning OFF web accelerators if there are any running...
http://docs.info.apple.com/article.html?artnum=44000

The iphone could not be updated because the firmware file is not compatible, can i get back to ios 7 as iphone 5s or itsnot possible!!!

My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)

You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing!

The disk can not be read or written to!

So this is the setup:
Latest version of iTunes running on the wifes PowerBook under 10.4.X
I’m using a new 4th Gen iPod Nano and I’m trying to sync the iPod to the library. Its gets about 400meg in and then comes up with error ‘The disk can not be read or written to etc etc...’ It stops at the same time every time.
The library is split between 70% CDs and the other 30% is are tunes copied over from my iTunes library.
I’ve authorised her Mac to play them so there should be no issue there (I think) as purchased tracks do play in her iTunes.
I’ve tried repairing permissions
Restoring the iPod and making sure the FW is up to date
Changing USB ports
What else can I try?
Thanks in advance.

Hello Sean,
Have you also tried reformatting the iPod using the tools provided by Windows?
[Erase Your iPod The Super Fix for Most iPod Problems|http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml]
Worth a shot. Hope it helps.
B-rock

Error 0xc000007b / Lightroom can not start

Hello,
I can not start lightroom 3. I have Windows 7.
If I want to start, there is an error:
"The application can not start (0xc000007b)"
What can I do?
Thank you,
best regards

Based on user suggestions and feedback we have updated our documentation on this issue with some new solutions.
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
We are locking this thread. If you have more questions or still are seeing the error, please continue the discussion on this thread: http://forums.adobe.com/message/4836005

ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but pr

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

I try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?

i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i do

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

TS5376 I have followed the instructions re these 2 errors "The program can't start because MSVCR80.dll is missing from your computer" but still not able to run iTunes. Anyone have a suggestion?

I have followed the Apple Support instructions re these 2 errors "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion?

Try completely removing and reinstalling iTunes and all related components; you may need to do this multiple times. It won't normally affect the iTunes library, but that should be backed up anyway.
(99328)

V32 iOS 8 Error: The library can not be updated

Similar Messages

Maybe you are looking for