V3xx calendar sync not supported in Leopard

With Tiger, I had found a sync plugin that worked for the Motorola V3xx with the exception that calendar synchronization worked only for copying items from the phone to iCal, but not from iCal to the phone. I was looking forward to full functionality. The phone is listed on Apple's list of supported devices for Leopard. I have just installed Leopard and was looking forward to syncing my phone, a Motorola V3xx.
During the setup, iSync reported that: "This phone does not support calendar synchronization."
Very disappointing.

Hey all,
So I just spent 100 minutes and 45 seconds on the phone with various Apple support agents and have come to the following two conclusions:
Apple’s support far surpasses most other companies I’ve dealt with. All the agents were friendly, helpful (as much as possible), and willing to get me to someone who could help (usually I have to argue to get to an engineer)...
The inclusion of the Motorola V3xx on http://www.apple.com/isync was a complete mistake.
It seems as though this phone is still being tested by Apple for inclusion later (Please, Jobs, make them do it soon). Also, there are apparently users within Apple who monitor these forums, so if any of them read this, GET YOUR A$$ IN GEAR!!!
Overall, my experience trying to sync has been this: bluetooth was faulty (probably a bad USB BT adaptor) but once used the USB connection to my phone, iSync adequately synced with my contacts ONLY. Even though the site says it can do both contacts and calendars, it will ONLY do contacts. You MAY need to download a plugin from http://www.clockslew.com/forum and install it by clicking on iSync once in the finder (highlighting it) and typing Cmd-I (for info) or go to the menu and click Get Info. Scroll all the way down and you can find the plugin section. You MUST add it this way or iSync will not run.
In the end, I’m ****** that Apple didn’t follow through on it’s “promise” of support (via the device list site), but I’m glad support was so kind and helpful. I just hope someone who can pass this problem on to the iSync engineers will find this.

Similar Messages

Siri keeps telling me "your calendar does not support location-based reminders" when I ask her to remind me to feed the cat when I get home. My address is in contacts and it has worked previously. Did iOS 8 change something?

calendar does not support location-based reminders....
i Just found a similar question below and it resolved my issue. Turn off the sync to exchange email and all works fine now.

Couldn't agree more. I've been *trying* to use location reminders ever since buying my iPhone 4S but as yet, out of many, many attempts they've only actually worked once.
The kid problem is very simple, the way the phone needs the location to be an address in your address book, and it's subsequent inability to correctly locate the address. My home address is a correct postal address, and has been unchanged for 40+ years, yet clicking on my address from my own contact entry puts my location some distance down my street.
Whilst I understand the issue with the address lookup, it seems to be a massive problem with the location based reminders as it's just not possible to set useful reminders.
What if I want to remind myself of something when I arrive at the car park on a shopping trip? There is no address for that in my contacts, I just want to pinpoint the location on the maps and say 'remind me when I get there'. Surely that's the simplest my far. Same with address book contacts, if you had a field with the gps position in then one could tag the locations and know they were 100% accurate for location services.
Such a shame as it's one of the key reasons I upgraded my phone and as it stands it just plain doesn't work.

ICal availability panel message "This Calendar does not support availability". Synch is OK with CalDAV. Don't know why - only since installing Yosemite

My iCal is synching OK withe the CalDAV calendar it is linked to, but when I try and check availability of others to schedule an appointment, it says "This Calendar does not support availability" I've only started getting this since upgrading to Yosemite

I have the exact same issue, I am working with apple support now, and they had me reinstall OS from recovery. Still no success...

Error message: "The Birthdays calendar does not support events."

Error message: "The Birthdays calendar does not support events." pops up 100 times..probably as many times as I have birthdays in my contacts....very irritating...

Well mother of christmas Apple, what the **** is this?! Please help us get this off the screen

This calendar does not support availability

Since upgrading to Yosemite, I can no longer see free/busy availability of my co-workers. Currently using ical Cal/Dev. Is anyone else having this same issue?

I have exactly the same issue. My companies Oracle Beehive calendar server and prior to Yosemite availability worked for me. After upgrading to Yosemite I now get the message "this calendar does not support availability". I can only conclude that Apple have change the way their client interacts with the server in this release in a way that stops it being able to leverage the availability information that the server supplies. In practice, this means that scheduling any work meetings requires me to use a different calendar client, which make calendar now pretty much useless for work!
I'm happy to test alpha/beta drops of fixes from Apple on my machines if it helps..
Please fix this a.s.a.p.

"Calendar: Feature not supported" When trying to a...

I have Nokia e52
SW: 022.009
and maps ver: 3.03
When I create a note in calendar and add location > Assign from Maps, I get error message: Calendar: Feature not supported
Is there way to fix it somehow?
Will SW update help?

Hi Zwitster,
Please try this code below, it works fine in my environment:
// replace your site URL
using (SPSite site = new SPSite("http://sp/sites/sharepoint2013"))
using (SPWeb web = site.OpenWeb())
// replace the source document URL with your URL
if (web.GetFolder("http://sp/sites/sharepoint2013/customDoc03/custom").Exists)
SPFolder folder = web.GetFolder("http://sp/sites/sharepoint2013/customDoc03/custom");
// replace the destination URL with your URL
folder.MoveTo("http://sp/sites/sharepoint2013/customDoc04/custom");
Please have a look at this article:
http://sharepoint.stackexchange.com/questions/115876/moving-document-set-from-a-documet-library-to-another-with-document-id
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Palm 755p not supported in Leopard?

I have been syncing my Palm 755p in Tiger using Missing Sync for some time. Then I upgraded to Leopard... Missing Sync didn't hold a connection, and the 6.0 version seems to have it's own problems, so I decided to try iSync.
The problem is that iSync won't even recognize the phone! When I try to add the device it says, "This device is not supported by iSync". But I see that others are using it with iSync in this forum. Any idea what's happening here?
I'm on a MacBook, with a 10.5.1
Brad

i had the same issue. I just did not use isync. Only certain devices are supported by isync. i have a 755p Palm. The Palm Treo 755p is not supported on the palm Tungsten and Zire families. The Pocket PC is also not supported see http://www.apple.com/macosx/features/isync/.
You must purchase third party software from http://www.markspace.com/missingsync_palmos.php from mark sync for $39.95. Then your palm Treo 755p can sync with ical and mac address book. Then you can publish your ical and address book to .mac (dotmac).
First, I installed the version of Palm that came on the CD with my phone. Then, I installed the latest version of the Palm v 4.2.1 Rev D from the website at http://www.palm.com/us/support/macintosh/macdesk421revd.html#sysreq. Then I did a hot sync to secure my information. Then I purchased and installed the missing palm sync from mark space. Then I hot synced again. I followed the instructions of letting the mac overwrite the handheld for the first sync. So after the sync i had to export my calendar and contacts from palm then import into ical and address book. Then I synced again.
Afterwards, I published to my .mac and selected update automatically. No problems ever since.
PS. I am running Leopard 10.5.1 on the new 24" imac.
http://forums.palm.com/palm/board/message?board.id=macintosh_hotsync&message.id= 5000&jump=true#M5000

HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

Calendar invites: not supported calendar message; webcal events not showing

I just upgraded from OS X Server 10.7.5 to Yosemite and server 4.0.x (latest as of 24-Jan-2015).
A couple of odd things have arisen regarding the calendar:
1. Invites sent from users' calendars to out-of-network calendars (both Exchange-supported outlook on windows and Calendar on Apple) now include a non-supported.ics file instead of a supported file that used to provide the ability to accept or decline. The non-supported ics file can be opened and the "accept" and "decline" options are available, but Calendar Server does not ever register the reply.
2. Invites sent to from users' calendars to other internal users seem to take much longer than they should to be sent, and replies take a very long time to register on the original sender's calendar.
3. Webcal either connects with an empty calendar - no events at all (on Firefox) - or with a persistent "getting events from server" message (on Safari).
I am considering exporting my calendar data (it's a family server and I have access to all the calendars on client machines) and my contact data (though I am not sure how to preserve the reminder data), and starting over with a fresh install of calendar server knowing I can add all the data back when the updated, clean install is complete. However, I'm not sure what steps to take if I wanted to do a "clean" install of just calendar server with no data and no pre-existing settings.
For what it is worth, some of the data in my current calendar server emanates from the unsupported version of calendar server, starting back in around 2006. I wonder if there isn't potentially some bad data in there, but I doubt that's what is causing these issues - I'd expect some events to look odd, but not for the server performance to degrade.
Any suggestions?
TIA

In other news - the calendar server has now stopped working all together. It seems to be on, as per the server app, and it seems to allow some connection to it, but it is failing to work - no updating/creation/deletion/etc. of events on clients. But I can delete and re-add a calendar account to a client.
I am not sure how best to do this, but here are the logs from a recent stopping and re-starting of the calendar service. Any ideas?
2015-01-30 20:08:06-0600 [-] Log opened.
2015-01-30 20:08:06-0600 [-] ControlSocket starting on '/var/run/caldavd/caldavd.sock'
2015-01-30 20:08:06-0600 [-] [txdav.base.datastore.subpostgres#warn] Cluster already exists at /Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg
2015-01-30 20:08:06-0600 [-] [txdav.base.datastore.subpostgres#warn] Requesting postgres start via /Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl ["-c listen_addresses=''", '-k /var/run/caldavd/PostgresSocket', '-c shared_buffers=75', '-c max_connections=50', '-c standard_conforming_strings=on', '-c unix_socket_permissions=0770', '-c log_lock_waits=TRUE', '-c deadlock_timeout=10', "-c log_line_prefix='%m [%p] '", "-c log_directory='/Library/Server/Calendar and Contacts/Logs'", '-c log_truncate_on_rotation=on', '-c log_filename=postgresql_%w.log', '-c log_rotation_age=1440', '-c logging_collector=on']
2015-01-30 20:08:07-0600 [-] [txdav.base.datastore.subpostgres#warn] postgres process ended with status 0
2015-01-30 20:08:07-0600 [-] [txdav.base.datastore.subpostgres#warn] /Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl exited
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseSchemaStep#warn] Beginning database schema check.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseSchemaStep#warn] Required database key VERSION: 48.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseSchemaStep#warn] Actual database key VERSION: 48.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseSchemaStep#warn] Schema version check complete: no upgrade needed.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseSchemaStep#warn] Database schema check complete.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseAddressBookDataStep# warn] Beginning database addressbook data check.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseAddressBookDataStep# warn] Required database key ADDRESSBOOK-DATAVERSION: 2.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseAddressBookDataStep# warn] Actual database key ADDRESSBOOK-DATAVERSION: 2.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseAddressBookDataStep# warn] Addressbook data version check complete: no upgrade needed.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseAddressBookDataStep# warn] Database addressbook data check complete.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseCalendarDataStep#war n] Beginning database calendar data check.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseCalendarDataStep#war n] Required database key CALENDAR-DATAVERSION: 6.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseCalendarDataStep#war n] Actual database key CALENDAR-DATAVERSION: 6.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseCalendarDataStep#war n] Calendar data version check complete: no upgrade needed.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseCalendarDataStep#war n] Database calendar data check complete.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseNotificationDataStep #warn] Beginning database notification data check.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseNotificationDataStep #warn] Required database key NOTIFICATION-DATAVERSION: 1.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseNotificationDataStep #warn] Actual database key NOTIFICATION-DATAVERSION: 1.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseNotificationDataStep #warn] Notification data version check complete: no upgrade needed.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseNotificationDataStep #warn] Database notification data check complete.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseOtherStep#warn] Beginning database other upgrades check.
2015-01-30 20:08:07-0600 [-] [txdav.common.datastore.upgrade.sql.upgrade.UpgradeDatabaseOtherStep#warn] Database other upgrades check complete.
2015-01-30 20:08:07-0600 [-] [twistedcaldav.authkerb.NegotiateCredentialFactory#error] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2015-01-30 20:08:12-0600 [-] [caldav-0] Reading configuration from file: /Applications/Server.app/Contents/ServerRoot/private/etc/caldavd/caldavd-apple. plist
2015-01-30 20:08:12-0600 [-] [caldav-0] Adding configuration from file: /Library/Preferences/com.apple.servermgr_calendar.plist
2015-01-30 20:08:12-0600 [-] [caldav-0] Adding configuration from file: /Library/Server/Calendar and Contacts/Config/caldavd-system.plist
2015-01-30 20:08:12-0600 [-] [caldav-0] Missing configuration file: /Library/Server/Calendar and Contacts/Config/caldavd-user.plist
2015-01-30 20:08:12-0600 [-] [caldav-0] [-] Log opened.
2015-01-30 20:08:12-0600 [-] [caldav-0] [-] [calendarserver.push.applepush.APNProviderFactory#error] Unable to connect to APN server: [Failure instance: Traceback: <class 'socket.gaierror'>: [Errno 8] nodename nor servname provided, or not known
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threadin g.py:783:__bootstrap
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threadin g.py:810:__bootstrap_inner
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threadin g.py:763:run
2015-01-30 20:08:12-0600 [-] [caldav-0]     --- <exception caught here> ---
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twis ted/python/threadpool.py:191:_worker
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twis ted/python/context.py:118:callWithContext
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twis ted/python/context.py:81:callWithContext
2015-01-30 20:08:12-0600 [-] [caldav-0]     ]
2015-01-30 20:08:12-0600 [-] [caldav-0] [-] [calendarserver.push.applepush.APNProviderFactory#error] Unable to connect to APN server: [Failure instance: Traceback: <class 'socket.gaierror'>: [Errno 8] nodename nor servname provided, or not known
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threadin g.py:783:__bootstrap
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threadin g.py:810:__bootstrap_inner
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/threadin g.py:763:run
2015-01-30 20:08:12-0600 [-] [caldav-0]     --- <exception caught here> ---
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twis ted/python/threadpool.py:191:_worker
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twis ted/python/context.py:118:callWithContext
2015-01-30 20:08:12-0600 [-] [caldav-0]     /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twis ted/python/context.py:81:callWithContext
2015-01-30 20:08:12-0600 [-] [caldav-0]     ]
2015-01-30 20:08:12-0600 [-] [caldav-0] [-] [calendarserver.push.applepush.APNFeedbackFactory#error] Unable to connect to APN feedback server: [Failure instance: Traceback: <class 'socket.gaierror'>: [Errno 8] nodename nor servname provided, or not known

Olympus E-3 not supported in Leopard 10.5.2!

This is unbelievable! Am I missing something? Is there a way to read E-3 Raw files? If not, that is it for Aperture and maybe Apple itself. I definitely will replace Aperture and may migrate to Windows software so I can ditch Apple altogether when it is time to replace my computer. Many a company whose business was booming has subsequently failed, due to letting quality and customer service slide. Apple appears to be doing precisely thia with the delays in updating Aperture and the premature release of Leopard. Also, their unwillingness to tell customers when they can expect an update is unforgivable.
Is there a way to process E-3 Raw files - am I missing something?

DNG is a great step forward I agree, but it's an added step. Keep in mind there have been problems in the past with E-1 files and DNG conversion adding black lines around things shot against white bg for example and while DNG is a great Idea, it's not supporting the actual RAW files.
I don't think this is about customer relations to me anyways it's about a competitive professional editing product. In every way I love aperture over others. [Capture One Pro being a close second] Thats why it burns so much that there is no E-3 support.
Castro steps down, Blue-Ray wins the format war what a week! Back to playing with Aperture 2. I know Apple devs check out the forums so please do another graphics support update for cameras not yet supported like the E-3. I'll play with Capture One Pro demo and compare the output vs. DNG aperture and then make a call, but even so tethered shooting is out then and it's an extra step every import with Aperture.
Thanks,
-Jonathan

APPLE DVD PLAYER 5.0 HD PLAYBACK NOT SUPPORTED IN LEOPARD!

Using TIGER I have been able to play the HDDVD containing the HVDVD_TS folders created with DVD Studio PRO 4, using the Apple DVD player, either from the hard drive (Open DVD Media) or from a DVD recorded by DVDSP4.
I am very dissapointed with LEOPARD because the HD feature of the Apple DVD player is not supported and missing from the preferences of the player.
What is the problem?. Is Apple turning its back on its HD customers?. I thought by now, we would not only be able to play our home made HD DVD's, but also the commercial discs with the new player and operating system. Apple has always been at the forefront of home video editing. I want to be able to preserve my HD footage as HD on optical media to play on all HD players. It is embarrassing that Windows already has software to record and play HD and Blu-ray commercial discs, but Apple does NOT!!
I tried using the older Tiger DVD player (version 4.6.5) with Leopard, but the HD support is still missing.
PLEASE HELP ME RESTORE THIS FEATURE TO THE APPLE DVD PLAYER WHICH IS EXTREMELY IMPORTANT OR MY HOME VIDEO EDITING AND BURNING!!!

The HD tab in my player preferences dissappeared when I upgraded to Leopard. The supported features under the HELP menu of the new DVD player displays "HD UNSUPPORTED". This changed when I upgraded to Leopard. I am still running Tiger on my wife's Imac Intel and the HD is supported. I copied the OLD DVD player from her computer unto my hard drive and the HD tab is missing and HD is unsupported. I am assuming it is a problem in Leopard in my iMac G5. I know that HD is supported on the iMac G5's as stated in the help MENU, and I had been using it all along. I don't know where to go for help on this. Can you guide me?
Thanks

Desktop Software - Calendar sync not installed??

Hi. I purchased the Torch last week. I use it for work. Due to firewall issues I had to have my IT department download the Desktop Software for me so that I could sync everything. I am on the personal plan not the Enterprise, although I still can receive emails for work.
When I did the Configure Settings to set up the syncing it let me do the Calendar and then the Address book. Yet when I got ready to run the sync the Calendar says "not installed". I was able to sync the contacts with my Outlook, but for some reason can't get the Calendar to work. I really need to have my calendar sync'd.
I'm on AT&T and have had the Bold 9000 previously. I never had any problems with the Desktop Software until now.
Any ideas on what is up???
Thanks,

Found some solution here that works for me:
You need to update your Blackberry settings. On the device (not on the Desktop Manager) go to Options -> Advanced Settings -> Default Services and select the email account for Outlook as your default calendar.
For some reason it selects other services, like Google or Facebook for the calendar by default.
After updating these settings on the device, you can go to Organizer -> Configure Settings on the Desktop manager and it should allow you to configure Calendar Sync this time.
Hope this helps,
Sincerely,
Oleg.
http://www.laphp.org/

IPhone calendar sync not working after upgrade to 9.2(61)

I updated my iTunes software and now the calendar on my iPhone won't sync properly.
When I change an event on the iPhone and then sync, it doesn't update in the calendar on my computer and it changes the event back to where it was before I changed it.
Any suggestions would be greatly appreciated!!
Margie

Had same problem....Apple tech guided me through this procedure that worked fine...
1) Sync your phone so that everything on your computer is as it should be.
2) RESTORE phone to factory settings. This is a choice in iTunes under the Summary tab when you have your iPhone device selected.
3) During this procedure you will be asked if you want to SET AS NEW PHONE. It is important to select YES to this option. This procedure takes some time...15-30 minutes
4) Set up your options for syncing from iTunes under the Info tab. If you change any settings here and ALLOW it, syncing will automatically happen. Make sure your calendar is being synced.
5) Check out the results...should be good.....I needed to sync a number of times to get everything back to normal.
6) Since doing this, the calendar syncs as it should and did before the upgrade, alone with everything else I want to sync.
Good Luck

Calendar syncing not functional, unwatched videos not reflecting..

I have had endless troubles since upgrading to V12:
(1)
My iPhone 5 stopped syncing the calendar with outlook, and now also refuses to accept new appointments to be entered on the phone. Not sure if the latter part is related to the former.
(2)
The unwatched tab doesn't reflect any of the new "home videos" that haven't been watched.
(3)
When I watch videos on the phone and then delete them on the phone, iTunes after a sync still shows them as unwatched in the full list (but not in the unwatched tab) and puts them back on the phone. Previously they would have showed as watched and not been re-synced to the phone.
Anybody with similar troubles?
T

Yes - both have time zone support and are set to London/GMT
The most recent of these aberrations was not even crossing a DST change - just a simple recurring event (which I've manually changed to single events by copy/paste).
I just tried a new one which goes back 1 hr 27 Oct - when UK clocks go back. As it's a dummy apt I'll leave it and see if if goes back to the correct time on 27 Oct! In the meantime, I can't afford for my appts to get screwed up so will continue to do them manually!
Thanks for your input.

Lost all data in Outlook Calendar - sync not putting them back

Yesterday i expereinced an issue with my calendar in Outlook that wiped all entries. Today I have tried to sync my curve to put the curve calendar back on Outlook and it said there were just a few changes to make between the two making me think that the entries are still in Outlook somewhere but not showing. I then tried a oneway sync and although it appears to do it, nothing is showing in Outlook. Any ideas?
Solved!
Go to Solution.

Found solution - I sync emails with an MSN mailbox but use the Outlook calendar, not the MSN one - Outlook had picked up MSN's calendar rather than my personal one which was why it was showing empty. Took me a while to work out what had happened and how to get my normal calendar back into view in Outlook.

V3xx calendar sync not supported in Leopard

Similar Messages

Maybe you are looking for