V490 default RSC login

Hi, This have been an issue for a while. All my new Sun V490 delivery have the RSC password protected. However, noone knows the default passwd!
RSC version 2.2.2 ()
Please login: admin
Please Enter password:Any idea what is the default password?

It has been a while since this question has been asked and answered.
There is no default password.
What you see on console is a generic prompt that's auto-generated by the RSC circuitry.
Read the system's documentation.
http://www.sun.com/products-n-solutions/hardware/docs/Servers/Midrange_Servers/Sun_Fire_V490/index.html
In particular, this is described in the V490 Server Administrative Guide (doc# 817-3951).
You need to connect by way of the serial management interface, NOT by using the RSC.
You need to install and configure your OS through that serial interface.
You must install the RSC software into the OS, then configure that RSC software from within the OS.
Then and only then can you establish RSC accounts and RSC passwords.
Then and only then will you finally be able to use the RSC for your administrative console connection.
It's in the system documentation.
Log a support case with Sun, to get their answers on this question.
This is just a public discussion forum, not Sun techsupport.

Similar Messages

Default shell login not taking effect.

Hello all. MBP running 10.5.1 as a portable user on a 10.5.1 Server fresh build.
A user's default shell login was originally set to /bin/bash. I then changed it to "none" and now can not change it back to "/bin/bash" or any other shell. Even when I change it and WGM sows it has been changed, when I launch terminal it says "You are not authorized to run this application".
I've changed the settings a handful of times, threw out most of the com.apple preferences and just don't see where the preference is stored. How can I reset the shell to the default '/bin/bash' ?

I've checked a dozen or so locations for a reference to the default browser and found one at ~/.account. It says the default browser is set to /dev/null (NONE). So I changed it reflect /bin/bash. Logged out and back in and it didn't work. Still trying to go to /dev/null. So I imagine that this is a problem with the the environmental variable for that user.
So, how do you set the environmental variable for a user who you can't log in to the shell with? I am logged into the computer with another admin account, and can get into su mode to modify settings. But how do you pull a different user's environmental variables so a super user can modify them?

Where is the default pre-login image, "Leopard Aurora"?

The default pre-login desktop image is called "Leopard Aurora".
*Where is this image?*
We want to change the pre-login default desktop image on all of our computers. I've seen hints and tips as to how you can just change this "plist" or sudo this or that. I do not care about any of that.
I would just like to know where the image is located at. Then I can find out its size and other properties and replace it. This seems far easier than to mess around with plists or file permissions, and so on.
+Many thanks to any who can answer this question.+

that picture is in /system/library/coreservices. but i suggest you leave it alone. generally, you should not modify anything in /System. if you want to change the login background image use this link
http://www.macworld.com/article/60979/2007/11/loginbkgnd2.html
Message was edited by: V.K.

AMS on EC2 - is there a default admin login?

Is there a default admin login for ams_adminConsole.htm on a new instance? I just launched an instance of ami-766cce1f and am trying to find my way through the available control interfaces. It's way different than running a Wowza server!

Hi,
There is no default login for the admin server. Please refer to this doc to configure one:
http://forums.adobe.com/docs/DOC-2334
You can create a user date script and use it while creating an instance so that you don't have to do this manually again.
Thanks,
Shiven

Add another mail login page besides the default mail login page

I want to add another mail login page besides the default mail login page(http://mail.mine.com). This should be accessed as:http://mail.mine.com/soo.htm.
I will keep the default page available too.
Is this possible? where to put this new page? How to config this?
Thanks!!!

If it works, then you have found it.
I make no claims to be a javascript programmer, nor do I claim to program html code.
If it doesn't work, you may need to remember that Messaging Express isn't really a web server, it's only a piece of one. . .

V490: rscadm: RSC firmware not respondig

Hello,
The story starts when I have instlled the RSC package on Sol 10.
I'v runt the rsc-config script.... and after the process finished I wasn't able to login on the RSC (I still can't). What ever command I'm perdorming on OS (e.g. ./rscadm version) the response is:
rscadm: RSC firmware not respondingI've tried to reset and bellow You can find the output:
Welcome to RSC bootmon v2.2.2
Reset register: 40000000 ESRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP:    Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP:    Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP:    Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP:    Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP:    Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test    = Flash Memory Data
    Test name     = FLASH CRC Test
    Subtest name = Main Sector Flash Test
    Failure: CRC Error - ReFlash EPROM.
             EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
    (Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection:
SC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
    (Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: f
Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP:    Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP:    Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP:    Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP:    Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP:    Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test    = Flash Memory Data
    Test name     = FLASH CRC Test
    Subtest name = Main Sector Flash Test
    Failure: CRC Error - ReFlash EPROM.
             EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
    (Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: C
Configure the jumper to read from FLASHBOAT, hit 'c' to continue Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP:    Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP:    Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP:    Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP:    Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP:    Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test    = Flash Memory Data
    Test name     = FLASH CRC Test
    Subtest name = Main Sector Flash Test
    Failure: CRC Error - ReFlash EPROM.
             EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
    (Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: d
OK. You're DOOMED!
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
    (Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: f
Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP:    Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP:    Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP:    Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP:    Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP:    Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test    = Flash Memory Data
    Test name     = FLASH CRC Test
    Subtest name = Main Sector Flash Test
    Failure: CRC Error - ReFlash EPROM.
             EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
    (Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: j
Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP:    Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP:    Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP:    Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP:    Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP:    Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test    = Flash Memory Data
    Test name     = FLASH CRC Test
    Subtest name = Main Sector Flash Test
    Failure: CRC Error - ReFlash EPROM.
             EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...[there is some interraction with the RSC, the menu was displayed and I have tried some functions.]
I've been googling and I have found that it is possible to download firmware image to the RSC, so the next step was to do it:
./rscadm download usr/platform/`uname -i`/lib/images/rscfw
rscadm: RSC did not respond during boot initializationThe download subcommand for rscadm has oprion "boot" but i couldn't find anywhere proper image :(. So If You know when it can be found I will be thankfull.
Maybe You have some other ideas how to fix it?
Regards and thanx in advance
toostrow

The error looks like corrupted firmware.
Its similar to what happened when in a moment of insanity I downloaded ALOM boot firmware into an RSC using the command /usr/platform/SUNW,Sun-Fire-V490/rsc/rscadm
# rscadm download boot alombootfw # DONT DO THIS IT KILLS THE RSC
Its not supposed to work
Looks like it was reported to sun as a bug ...
Bug ID: 4924833Synopsis: On-line help lists boot as an option to "rscadm download"
Of course if you follow the README instructions you will not be copying ALOM firmware onto an RSC based system. They are similar hardware but not firmware compatible.
The serial output on powering up the system with the (now corrupted) rsc now looks like this and it doesn't work without replacing the RSC card.
ALOM BOOTMON v1.6.5
ALOM Build Release: 001
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
   Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP:    Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP:    Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP:    Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP:    Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP:    Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
    D-CACHE Performance Increase I-CACHE Disabled
    D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: ALOM POST TEST
H/W under test    = Flash Memory Data
    Test name     = FLASH CRC Test
    Subtest name = Main Sector Flash Test
    Failure: CRC Error - ReFlash EPROM.
             EPROM CRC: 00000000 Calced CRC: f6f497d5
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Loading the r�Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...

Default Novell Login mode for Windows 2008 R2 servers?

We're using Novell Client 2 SP3 for Windows 7 (IR6).
All our Windows 7 workstations behave so that the Novell Logon is always the default (ie: you do CTRL-ALT-DEL and always get the Novell Logon first), then of course you get logged into ZCM and then our MS AD environment.
However, using the SAME client with the SAME settings (unattend.txt or whatever) on a Windows 2008 R2 server with Citrix OR TS enabled, yields different results.
Sometimes you get just the Windows logon (and then of course, you're not logged into eDirectory), sometimes you get the Novell one first.
Any ideas on what setting to check?
On 4.951 SP5 there was Gina chaining, but Windows7/2008 use credential provider order (I think), but I have no idea why it would behave differently.
Thanks!

Originally Posted by Alan Adams
kjhurni <[email protected]> wrote:
> So we tested on a non-Citrix server (but it still has Terminal Services
> enabled).
>
> It seems if someone goes in via the console (vmware or rdp) and does a
> "workstation only" login (I should say specifically where you pick the
> option to NOT use the Novell Client), that's where the issue arises.
>
> So is there a Novell Client setting to use to always make it use the
> Client? (I thought I had that set already)
> Or is this a Terminal Server issue and we need to look somewhere in MS
> land?
I'm not clear exactly on what you're seeing, but it sounds like you're
describing going to the interactive console login process and picking
"a completely non-Novell Client-related credential".
Meaning once you have selected the credential and can see the username
and the password field you need to enter the password in to, there is
NEITHER a "Novell Logon" nor "Computer Only Logon" link offered on
that credential, because that credential isn't one generated by Novell
Client / NCCredProvider at all.
I agree, if that's what you mean, that it sound like the kind of
process we were suspecting could be occurring, where Windows now
defaults to "the last credential provider you used" and that's NOT
Novell Client because some other credential was selected and used
during the previous login.
Normally, simply having "Novell Login = ON" does cause "Novell Client
to be the only credential provider available", but that statement
really only holds true on a "standard Windows machine" where only the
Microsoft-supplied in-box credential providers are present.
The way Novell Client achieves this is to actually "filter out" a
couple of the Microsoft in-box credential providers, so that instead
of seeing "both the Microsoft-generated credential tiles and the
Novell Client NCCredProvider-generated credential tiles as ones you
can choose from", by filtering out the Microsoft credential providers
you end up seeing only NCCredProvider-generated credentials.
Meaning, instead of getting a Windows-only credential tile generated
by Microsoft's in-box "PasswordProvider" credential provider
(AUTHUI.DLL) /AND/ the Novell Client NCCredProvider-generated
credential tiles, you instead only get the NCCredProvider-generated
tiles, and if you want to login Windows-only you have to select
"Computer Only Logon" from the NCCredProvider-generated credential.
But the behavior you're seeing, and a behavior not uncommon with
third-party credential providers, is that some other product wanted to
extend the functionality of Microsoft's in-box "PasswordProvider"
credential provider. So this third-party /also/ filters Microsoft's
"PasswordProvider" credential provider out (just like NCCredProvider
does), but then internally the third-party "wraps" the Microsoft
"PasswordProvider" credential provider in order to present "99% normal
PasswordProvider behavior, but with 1% of new third-party-specific
behavior."
Which means, from a Windows perspective, these credentials are now
being created by the third-party "wrapper", not the Microsoft
"PasswordProvider" credential provider directly. So even though
Novell Client filtered "PasswordProvider" out, there is this new
unique third-party wrapper's credential tiles still being shown, which
just happen to "look at feel just like PasswordProvider but with 1% of
additional third-party-specific functionality."
From your perspective, it simply looks like "Novell Client never
disabled Microsoft's PasswordProvider", which in actuality we have
filtered it out, but some other third-party is "making their own
instances of Microsoft's PasswordProvider credentials." Since the
credentials are no longer being created by a credential provider which
has Microsoft's well-known GUID for the "PasswordProvider" credential
provider, filtering out that GUID no longer stops the credentials from
"appearing anyway".
One option is to add the GUID of the third-party wrapper (whomever
that is) to the Novell Client's "FilterList" value under
[HKEY_LOCAL_MACHINE\Software\Novell\Authentication\ NCCredProvider].
This is where the Microsoft "PasswordProvider" GUID is already listed,
and you would just add the additional GUID(s) to this REG_MULTI_SZ
list value.
Maybe the third-party has some additional functionality or utility
knowledge that they learn by wrapping Microsoft's credential provider,
but in your case you are wanting to select the NCCredProvider-based
credential anyway, so you're not going to be selecting the
third-party's "wrapped" Microsoft PasswordProvider credential. And
the fact that the third-party's "extra" credential tiles are being
offered and can be "accidentally" selected is breaking your desired
default behavior of "always send the end-users to NCCredProvider."
If it's not clear what credential provider / wrapper on the system may
be doing this, export
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential
Providers] to a .REG file and then just cut-n-paste the .REG file text
contents into a post here.
Alan Adams
Novell Client CPR Group
[email protected]
Novell, Inc.
www.novell.com
Thanks Alan,
In this case it seems simply putting the Novell Client on a Windows server with Terminal Services enabled is enough to cause the issue.
On an actual server login (ie: Vmware console) you press CTRL-ALT-DEL
You see the Novell Login section (this is server 2012 R2, BTW) with the userid/password
2 lines below it it says:
Computer Only Logon
If you choose Computer Only Logon
Then it "stays" at Computer Only Logon for all subsequent logons/reboots.
I'm going to guess it's probably a Windows setting (we only have a few GPO settings pushed out to servers via AD).
Anyway, here's the reg key contents:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{1b283861-754f-4022-ad47-a5eaaa618894}]
@="Smartcard Reader Selection Provider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{1D7BE727-4560-4adf-9ED8-5EEC78C6ECFF}]
@="CtxKerbProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{1ee7337f-85ac-45e2-a23c-37c753209769}]
@="Smartcard WinRT Provider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{2135f72a-90b5-4ed3-a7f1-8bb705ac276a}]
@="PicturePasswordLogonProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{25CBB996-92ED-457e-B28C-4774084BD562}]
@="GenericProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{3dd6bec0-8193-4ffe-ae25-e08e39ea4063}]
@="NPProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{600e7adb-da3e-41a4-9225-3c0399e88c0c}]
@="CngCredUICredentialProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{60b78e88-ead8-445c-9cfd-0b87f74ea6cd}]
@="PasswordProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{60b78e88-ead8-445c-9cfd-0b87f74ea6cd}\LogonPasswordReset]
@="{8841d728-1a76-4682-bb6f-a9ea53b4b3ba}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{8FD7E19C-3BF7-489B-A72C-846AB3678C96}]
@="Smartcard Credential Provider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{94596c7e-3744-41ce-893e-bbf09122f76a}]
@="Smartcard Pin Provider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{cb82ea12-9f71-446d-89e1-8d0924e1256e}]
@="PINLogonProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{e74e57b0-6c6d-44d5-9cda-fb2df5ed7435}]
@="CertCredProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{F8A0B131-5F68-486c-8040-7E8FC3C85BB6}]
@="WLIDCredentialProvider"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Authentication\Credential Providers\{f9cf286d-a029-41f9-86f6-90acf0618aa4}]
@="NcCredProvider"
Hope this helps.

Default sharing login

I have an Intel iMac i7 that acts as fileserver for our office. It's running 10.6.8. I just upgraded my Intel Macbook Pro to Lion and connecting to the iMac has become a pain. I used to click a folder from the share that I had added to my favorites and it would connect automatically. Now, it says the folder is unavailable or more often, simply goes back to the folder I was in originally and acts like nothing happened.
The reason for this is that by default, it insists on connecting to the iMac as username "michael." The thing is, the iMac has no user "michael" and that's actually the username for my laptop. So in order to connect, I have to click the iMac entry in the Shared list, wait for it to connect improperly as me, then click "Disconnect" at which point it says I'm connected as "guest." Only then can I pick "connect as...", when that window comes up, it's pre-filled with the proper login from keychain and it works fine after that.
I tried removing all stored logins for the iMac from keychain, but it insists on connecting as this non-existant user and forcing me to take extra steps to get it to connect as I want. I'm sure it's "helping" but it's not a help. How do I make it connect properly?

yeah your system files have been changed on automatically its a bug I have a fix will post fix soon here is a hint in terminal type
cd /etc/
ls -la
and check and see if you have duplicate file with the ~orig attached to them.

Oracle WAM v1.9 : Default admin login

Hi
I have installed Oracle Utilities Work and Asset Management v1.9 following the instructions in the install guide.
I can see the login screen with the url : http://<host>:<port>/DEMO/synergen
But i couldnot find the credentials(username/password) for the default admin user to logon.
Please help.
Thanks
Soumik

I found the answer in another area.
weblogic/weblogic
Apparently, I fat fingered it a few times.

Vpn default 3 login per account ?

I use a external AD database for vpn authentication login.
I just noticed by default, asa only allow 3 simultaneous login per account. I tried to login vpn using multiple PCs with same username, but only can login with 3 PCs, as long as I tried fourth one, one of the precious 3 got disconnect..
Is any way I can increase the number?
Thanks

Yes, go into Group-policy mode and set the number to your desired setup:
group-policy WHATEVER general-atributes
vpn-simultaneous-logins X
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/uz.html#wp1572279

Reg System Date & Time by default on login page

Hi,
I need to know if we can display default date and time on Login Page and other Views in WDA..?
This is just beautification issue but if it can be resolved, it would enhance my credential.
Thanks.
Kumar Saurav.

Hi Kumar,
You can declare a Node in Comp controller and set this Node by Sydatum & syuzeit. Now you can fetch this node in any view or you can declare a Global attribute of type ELEMENT_<Context Node Name> and get this aatribute in any view using WD_COMP_CONTROLLER-><Attribute Name>.
Also can you explain your requirement for Date & time field on Login Page?
Hope it helps you.

How to get back to default user login from 'switch user' screen

Hi
I have a macbook air and mistakenly pressed 'switch user' from the login screen. Now I am stuck on a different login screen with now option to go back to the main / usual one?
Is there a keyboard shortcut or something to go back? The only option I have are to 'sleep' 'restart' or 'shutdown' and I don't want those because of unsaved work?!
Thanks

Hi Aritra,
Just have a look at the report RSUSR200. This report is part of the AIS (Audit Information System) and will report users who have not logged on for a specified period of time.
Also have a look at the report RSUSR000.
You can even find out more reports from SE38 searching for RSUS* & then click f4.
You can get the names of the tables & the flow if you go through these programs.
Regards
Abhii

ICSS : How to set the default number login errors.

Hi experts.
Does anyone know how we can set the number of failed passwords when login to the icss application ?
While debugging i've seen that when we log we got to the backend function module 'CRM_ICSS_GET_USER_DETAILS' but i'm unable to see how and where is the check on the password managed.
If anyone has an idea, it will be very helpful. I need to reduce the number of failed from 6 to 3. Maybe it's a customizing point ...
Thanks for the help.
Regards.
Helder.

ICSS does not attempt to limit the logon attempts explicitly. Number of login attempts before locking a userid is a Basis / system profile parameter setting.
login/fails_to_user_lock
You can change this setting to get what you need.But, this change will affect all the SAPGUI user logon behavior, and this may not be what you wanted. For more information about this, see the documentation for the profile parameter in transaction RZ11
However, if you want to programatically count , limit and give a custom message after three attempts, you can try enahncing the login related actions - such as IcssInitAction .
Easwar Ram
http://www.parxlns.com

9iAS default databse login screen when run form in browser

Gurus!
If u remember me! last time i have asked u what should
i do to invoke my own .html file while typing the ip
of my oracle application server machine, u gave me a
solu., that WORKS! thank u very much for that! now the
prob. is that when i run my forms application through
that .html form(which is infact the tester form to
test that if form server is successfully installed or
not, i am using that form with litle modifications i.e
instead of running the test.fmx i gave it the name of
my own form.)Every thing is installed successfully but
when invoked my .fmx form through index.html file it
displays the login form of oracle which appear when u
not supply the user/password@db info. but i have given
these info. when calling my .fmx file. whats the
prob.?
Kindly help in this frustrating situation again ASAP!
Very thankfull to u!

i got it
just make report out of SSO by the steps
If you don't want to use Single Sign-On:
Edit $ORACLE_HOME\reports\conf\rwservlet.properties
Change #SINGLESIGNON=YES to SINGLESIGNON=NO
Log in to the Enterprise Manager website at http://<server_name>:18100
Navigate to the Report server page. Click on the "Edit Configuration File" link.
Delete the section that reads
<security id="rwSec" class="oracle.reports.server.RWSecurity">

<property name="oidEntity" value="reportsApp_apps10_85643151B9D911DCAF4E278FF4D47F77"/>
</security>
Press “OK” and let EMWebsite restart the reports server. or restart all
and it will work ...

Default error login message

Hi,
Can you please let me know how I can replace the default message with my own message if a user enters his wrong user id or password?
Thanks in advance.

How do users authenticate to your application and where is the username/password stored?
Scott
P.S. Please tell us your first name, add it to your OTN profile, and change your handle to something easy to read as a help to us. Thanks.

V490 default RSC login

Similar Messages

Maybe you are looking for