V490: rscadm: RSC firmware not respondig
Hello,
The story starts when I have instlled the RSC package on Sol 10.
I'v runt the rsc-config script.... and after the process finished I wasn't able to login on the RSC (I still can't). What ever command I'm perdorming on OS (e.g. ./rscadm version) the response is:
rscadm: RSC firmware not respondingI've tried to reset and bellow You can find the output:
Welcome to RSC bootmon v2.2.2
Reset register: 40000000 ESRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7 Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP: Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP: Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP: Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection:
SC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: f
Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7 Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP: Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP: Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP: Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: C
Configure the jumper to read from FLASHBOAT, hit 'c' to continue Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7 Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP: Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP: Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP: Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: d
OK. You're DOOMED!
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: f
Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7 Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP: Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP: Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP: Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: j
Welcome to RSC bootmon v2.2.2
Reset register: e8000000 EHRS ESRS LLRS CSRS
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
RSC2 POST - Version 10-18-2000 0.7 Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP: Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP: Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP: Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: RSC POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 98a2bebb Calced CRC: 20e2c3d3
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Load the RSC, then �Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...[there is some interraction with the RSC, the menu was displayed and I have tried some functions.]
I've been googling and I have found that it is possible to download firmware image to the RSC, so the next step was to do it:
./rscadm download usr/platform/`uname -i`/lib/images/rscfw
rscadm: RSC did not respond during boot initializationThe download subcommand for rscadm has oprion "boot" but i couldn't find anywhere proper image :(. So If You know when it can be found I will be thankfull.
Maybe You have some other ideas how to fix it?
Regards and thanx in advance
toostrow
The error looks like corrupted firmware.
Its similar to what happened when in a moment of insanity I downloaded ALOM boot firmware into an RSC using the command /usr/platform/SUNW,Sun-Fire-V490/rsc/rscadm
# rscadm download boot alombootfw # DONT DO THIS IT KILLS THE RSC
Its not supposed to work
Looks like it was reported to sun as a bug ...
Bug ID: 4924833Synopsis: On-line help lists boot as an option to "rscadm download"
Of course if you follow the README instructions you will not be copying ALOM firmware onto an RSC based system. They are similar hardware but not firmware compatible.
The serial output on powering up the system with the (now corrupted) rsc now looks like this and it doesn't work without replacing the RSC card.
ALOM BOOTMON v1.6.5
ALOM Build Release: 001
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Counting DOWN: Read - Verify - Write data: aa33cc66
Counting UP: Read - Verify - Write data: 33cc6699
Counting DOWN: Read - Verify - Write data: cc669955
Counting UP: Read - Verify - Write data: 669955aa
Counting DOWN: Read - Verify - Write data: 9955aa33
Counting UP: Read - Verify - Write data: f0f0f0f0
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
ERROR: ALOM POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 00000000 Calced CRC: f6f497d5
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
Loading the r�Copying self to RAM...Done.
Jumping to RAM.
Waiting for boot protocol message...
Similar Messages
-
Issuw with the RSC, Error : RSC firmware not responding
HI,
Unfortunately we installed ALOM_1[1].6.10_fw_hw0.tar.gz package on RSC
PFB...
myhost#: /usr/platform/SUNW,Sun-Fire-V490/rsc/rscadm download boot /usr/platform/SUNW,Sun-Fire-V490/lib/images/alombootfw
Download completed successfully
myhost#: /usr/platform/SUNW,Sun-Fire-V490/rsc/rscadm download /usr/platform/SUNW,Sun-Fire-V490/lib/images/alommainfw
Download completed successfully
Now RSC is not accessible :(
can any one suggest what could be done in this case ??
Rgds
ShaikWhere did you get the firmware from.
The only ALOM download I'm aware of is at http://www.sun.com/servers/alom.html
And its only supported on the following servers.
* A Sun Fire V125 server
* A Sun Fire V210 server
* A Sun Fire V215 server
* A Sun Fire V240 server
* A Sun Fire V245 server
* A Sun Fire V250 server
* A Sun Fire V440 server
* A Sun Fire V445 server
* A Netra 210 server
* A Netra 240 server
* A Netra 440 server
So its possible you've loaded an incompatible firmware.
In which case, its likely only Sun can help you.
Although its possible loading correct firmware would fix it. -
Ipod 4g 8gb, with 4.2.1 firmware to 4.3 firmware not ios 5.1.1
hi i have an ipod 4g 8gb, with 4.2.1 firmware and i wanted to update to 4.3 firmware not ios 5.1.1 because i've read in a lot of forums that it peope who upgraded to ios5 made their ipods 4g really slow. and im really worried with a limited memory such as 8gb,it will make my ipod very sluggish. so i was thinking is there a way that i could update to ios 4.3 instead of the latest firware? thanks!
No, Apple only allow you to update to the latest iOS. What mseems to make the iPod lag a little is the limited amount of memeory on the iPod. The 3G and 4G only have 256 MB of memory. Do not confuse with the amount of storage on the iPod. An 8 GB 4G iPod will not be any slower than a 32 or 64 GB 4G iPod.
-
Unable to update or restore Ipod due to firmware not found?
Can anyone help me? I've had my Video Ipod for about a year and a half and have never had trouble with it until now. I can't update it to the lastest software as a message comes up Unable to update software due to firmware not being found. I tried to resort to restoring it to the original factory settings but I ran into a message that said Unable to restore ipod due to firmware not found. Has anyone else had this problem? Help!!!
For step-by-step instructions, go here:
http://docs.info.apple.com/article.html?artnum=304309 -
HT201210 cannot update software firmware not compatable phone is iphone 4
I am trying to update the software on my iphone 4 to newest software to activate my phone as a wi-fi hotspot. I downloaded the software and updated on itunes and got the error prompt firmware not compatable update failed? What happened????
You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.
-
What does firmware not compatible mean?
I keep getting the error message "firmware not compatible" when I go to update my ipone4s from itunes. Has anyone else encountered this?
I was having this same problem. I followed a suggestion in another thread and updated directly from the phone (over WiFi) which was successful.
-
I have a 30gb ipod, but want to restore to factory settings. With my computer conected to the internet, iPod hooked up to the laptop, iTunes open, I click on restore but get the error message, Could not restore, firmware not found. Any ideas here?
Thanks.Please delete the following folder and try again:
C:\Documents and Setings\yourusername\Application Data\Apple Computer\iTunes\iPod Software Updates
You may need to show hidden files in order to see the Application Data folder. Open up My Computer, and in the Tools menu, choose "Folder Options..." Then go to the View tab, and then in the "Advanced settings", select "Show hidden files and folders." -
HT201210 Firmware not compatible what does this mean?
Im trying to updat iphone 4 and it says firmware not compatible what does this mean??
Mine too. Did you find out what to do about this?
-
Hi, This have been an issue for a while. All my new Sun V490 delivery have the RSC password protected. However, noone knows the default passwd!
RSC version 2.2.2 ()
Please login: admin
Please Enter password:Any idea what is the default password?It has been a while since this question has been asked and answered.
There is no default password.
What you see on console is a generic prompt that's auto-generated by the RSC circuitry.
Read the system's documentation.
http://www.sun.com/products-n-solutions/hardware/docs/Servers/Midrange_Servers/Sun_Fire_V490/index.html
In particular, this is described in the V490 Server Administrative Guide (doc# 817-3951).
You need to connect by way of the serial management interface, NOT by using the RSC.
You need to install and configure your OS through that serial interface.
You must install the RSC software into the OS, then configure that RSC software from within the OS.
Then and only then can you establish RSC accounts and RSC passwords.
Then and only then will you finally be able to use the RSC for your administrative console connection.
It's in the system documentation.
Log a support case with Sun, to get their answers on this question.
This is just a public discussion forum, not Sun techsupport. -
HP Laserjet M2727nf - Firmware not loading to Printer
My printer display was not working so I ordered a new one. But as I read some postings it seems to be by formatter board. I baked the formatter board. After I baked it, the display would show: Hewitt Packard >>>>>. I did the below
but the firmware utility update is not going to the printer. The display shows ***BootDimm*** Ready 2 download.
I have left the jumper on and have taken it off to upload the firmware to the printer. Nothing has happened. I have not even seen the display changing to erasing firmware, then programing firmware.
I baked the board and it started to work. I then Download the firmware utility update for my printer. I Removed the printer left cover. Turned the printer on while it’s was connected by usb. Jumper or short the 2 pin connector - the display read "ready to load firmware". I heard the printer usb driver connect / initialize in windows-
Next I started the HP firmware update utility, select your printer from drop down list. However the display did not change to erasing firmware, then programing firmware; finally it will display "firmware rom upload complete" - or something close to that. The computer did do this: the progress bar on the firmware update utility in windows completed and displayed the smiley face (about 3 min). Then I turned the printer off - unpluged it and disconnect the usb cable from the printer. It did not load. So where did I go wrong.Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?
-
Strange boot bug; open firmware not working
Hi!
I have a powerbook Alu 15", 1.5Ghz. It runs OS X 10.4.2 with the latest security update. My problem started last Saturday.
The problem is that my pb will not restart nor boot on its own. The computer makes its usual chime, the hard-disk starts to spin for a few second, and then stops suddenly before anything is displayed on the screen (the display does not even light-up). If I press the option key after or before the chime, and keep it pressed, or the shift key, or the c key, or the t key, or the command-option-p-r key combination, or even the command-option-o-f key combination, the behavior is exactly the same: the disk starts to spin for a few second after the chime, and suddenly halts. The computer appears to shutdown on its own before the boot can even start.
Here is the strange part: the computer boots normally if I press the command key (this key on its own is not suppose to do anything). It also works if I press the command-s or command-v key combination. No other key combination seem to work.
Except for this strange boot behavior, the computer works flawlessly. I did not have any kernel panic for at least a year, the computer did not crash recently, everything works fine except for one small detail on which I will come back at the end.
I've tried to fix the problem by the following actions:
1) Clean install of Tiger with a new partitioning of the disk; I even zeroed the entire disk. This did not change anything so the problem is probably not OS related.
2) Reset of the PMU with the four finger salute: shift-control-option-power combination. No effect except that I lost the date/time information. Hence the reset worked.
3) Tried to reset the PRAM, but the command-option-p-r key combination does not seem to work.
4) Tried to load the open firmware with command-option-o-f, but this does not work either.
5) Memory seems ok. I have 1x256M of Apple RAM + 1x1G of RAM bought from OWC. I've had the OWC RAM for about a year without any problem. Anyway, I removed the 1G module and tried to boot on the 256M Apple module alone. Exact same behavior. Then I removed the Apple module and put back the 1G module. Exact same boot behavior. So the problem is not with my RAM, unless both modules have simultaneously developed a malfunction.
6) Tried to run the Apple hardware tests. However, for my machine, these tests come on the install DVD, in a special hidden volume. To boot on this special volume, one needs to boot with the option key depressed, and to select the boot volume from the open firmware interface. But this does not work on my machine, the computer seems to shut down before this interface can be activated!
So this problem is very strange. I can live with having to press the command key for booting my machine, but I would sure like to know what is going on here. Is the problem hardware related? Perhaps, but as I said, the machine works flawlessly except for the strange boot behavior.
Is the problem related to firmware? I think that this is the most probable option. What do you think? Maybe, the firmware got slightly corrupted? Maybe a bit got flipped in the flash memory? Is this possible? I guess so. But, what can I do? Should I contact my friendly local repairman?! I have to admit that this option scares me a little bit for such a strange problem. I would need an Apple engineer with boot related experience/expertise!
Now, here is a little bit of further information. I don't know if its related, but it is also very strange. I work with a dual screen configuration. Usually, I connect my screen and then I wake up the computer. Last week, I noticed that if I connect my second screen live, the system detects it automatically. I guess this is new to Tiger? Anyway, the strange behavior is that the computer then asks me if I want to sleep, restart or shutdown my pb, as if I had pressed the power button. But I did not press this button when I connected the dvi connector >:-o
Many thankHi Scott!
Almost every time the PowerBook woke after sleep, I got the 'Are you sure you want to shut down your computer now...' message.
I get this message upon wake only rarely, but every time I plug or unplug a display live.
The strange behaviour was tolerable, so I've lived with it for several months. But then when checking out the PowerBook discussions, I read about the failing lower RAM slot problems, and just out of interest, checked out my System Profiler....
Ok, so the good news is that my pb may continue to work for several months
My lower RAM slot appears to be ok for now.
Interestingly, I'm sure that the start-up problems began when I started using my PowerBook with a 23" Apple Cinema Display (a pink hued one, but that's another on-going saga) - and you too have mentioned that you use an external display, so I wonder if that's part of the cause of our start-up problems.
Yes, I've noticed the 'Are you sure you want to shut down your computer now...' message just a few days before noticing the strange boot problem (not sure if the machine booted in between). I use ViewSonic displays (one at home and one at the office), and several different projectors in different class rooms. From what I read, it is plausible that there is a link between this problem and the dvi port. Could it be that the boot sequence of mb is affected by a hardware problem on the dvi port? But not when a press the command key?!
Anyway, my machine is no longer under warranty, so I intend to live with the problem for as long as possible...
But I've been doing more regular backups since then.
Best wishes to you and your (almost) new machine!
Marc. -
[SOLVED] ALSA firmware not loading properly with kernel 3.8.6-1
Hi All,
I have a E-MU 1820 card + breakout box that have been working beautiful under Archlinux for years but now something happen.
It still work OK under windows (dual boot same computer).
Normally during boot all indicators on the breakout box blink and then only thin show is clock setting indicator. But now all the indicators still blink but instead it is a -12 dB indicator that light up and not the clock settings and no sound.
dmesg show following.
[christer@Arch ~]$ dmesg | grep emu
[ 5.269612] emu1010: Special config.
[ 5.269731] emu1010: EMU_HANA_ID = 0x7f
[ 5.274685] emu1010: firmware file = emu/hana.fw, size = 0x133a4
[ 13.465727] emu1010: Hana Firmware loaded
[ 13.465776] emu1010: Hana version: 3.4
[ 13.465864] emu1010: Card options = 0x0
[ 13.465888] emu1010: Card options = 0x0
[ 13.466379] emu1010: Card options3 = 0x0
[ 14.486723] emu1010: Loading Audio Dock Firmware
[ 16.477785] emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x36
[ 16.477809] emu1010: EMU_HANA+DOCK_ID = 0x55
[ 16.477809] emu1010: Audio Dock Firmware loaded
[christer@Arch ~]$
aplay -l looks like it did before.
[christer@Arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
[christer@Arch ~]$
lsmod
[christer@Arch ~]$ lsmod | grep emu
snd_emu10k1 140245 1
snd_util_mem 2403 1 snd_emu10k1
snd_hwdep 6428 1 snd_emu10k1
snd_ac97_codec 113456 1 snd_emu10k1
snd_rawmidi 18831 1 snd_emu10k1
snd_seq_device 5268 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 78146 3 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7426 2 snd_pcm,snd_emu10k1
snd_timer 18934 3 snd_pcm,snd_seq,snd_emu10k1
snd 60156 13 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
[christer@Arch ~]$
From what I can see all looks OK, like it did when it worked, but something is not at it should.
Any thoughts or ideas about what might have happen or how to progress in troubleshooting.
All input most welcome.
I found info describing problem with firmware loading, but it is over my head.
http://git.kernel.org/cgit/linux/kernel … 54cf7008ab
Output from Aadebug ( http://alsa.opensrc.org/Aadebug )
[christer@Arch ~]$ ./alsadebug
ALSA Audio Debug v0.2.0 - Fri Apr 12 20:46:05 CEST 2013
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/agpl-3.0.txt
Kernel ----------------------------------------------------
Linux Arch 3.8.6-1-ARCH #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013 x86_64 GNU/Linux
Advanced Linux Sound Architecture Driver Version k3.8.6-1-ARCH.
Loaded Modules --------------------------------------------
snd_emu10k1 139271 2
snd_util_mem 2339 1 snd_emu10k1
snd_hwdep 6364 1 snd_emu10k1
snd_pcm_oss 38511 0
snd_mixer_oss 14995 1 snd_pcm_oss
snd_ac97_codec 112216 1 snd_emu10k1
snd_seq_dummy 1463 0
snd_seq_oss 29098 0
snd_seq_midi_event 5660 1 snd_seq_oss
snd_rawmidi 18742 1 snd_emu10k1
snd_seq 49946 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5180 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 76956 4 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7298 2 snd_pcm,snd_emu10k1
snd_timer 18687 3 snd_pcm,snd_seq,snd_emu10k1
snd 58893 14 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
Proc Asound -----------------------------------------------
0 [EMU1010 ]: Audigy2 - E-mu 1010 [MAEM8810]
E-mu 1010 [MAEM8810] (rev.3, serial:0x40011102) at 0xd000, irq 19
1: : sequencer
2: [ 0- 0]: hardware dependent
3: [ 0- 1]: raw midi
4: [ 0- 0]: raw midi
5: [ 0- 3]: digital audio playback
6: [ 0- 2]: digital audio playback
7: [ 0- 2]: digital audio capture
8: [ 0- 1]: digital audio capture
9: [ 0- 0]: digital audio playback
10: [ 0- 0]: digital audio capture
11: [ 0] : control
33: : timer
00-00: EMU10K1 (FX8010)
00-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
00-01: emu10k1 mic : Mic Capture : capture 1
00-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
00-03: emu10k1 : Multichannel Playback : playback 1
Client info
cur clients : 3
peak clients : 3
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Connecting To: 15:0
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
Client 15 : "OSS sequencer" [Kernel]
Port 0 : "Receiver" (-we-)
Connected From: 0:1
Client 16 : "E-mu 1010 [MAEM8810]" [Kernel]
Port 0 : "Audigy MPU-401 (UART)" (RWeX)
Port 32 : "Audigy MPU-401 #2" (RWeX)
Client 17 : "Emu10k1 WaveTable" [Kernel]
Port 0 : "Emu10k1 Port 0" (-We-)
Port 1 : "Emu10k1 Port 1" (-We-)
Port 2 : "Emu10k1 Port 2" (-We-)
Port 3 : "Emu10k1 Port 3" (-We-)
Dev Snd ---------------------------------------------------
total 0
drwxr-xr-x 2 root root 60 Apr 12 20:42 by-path
crw-rw----+ 1 root audio 116, 11 Apr 12 20:42 controlC0
crw-rw----+ 1 root audio 116, 2 Apr 12 20:42 hwC0D0
crw-rw----+ 1 root audio 116, 12 Apr 12 20:46 hwC0D2
crw-rw----+ 1 root audio 116, 4 Apr 12 20:42 midiC0D0
crw-rw----+ 1 root audio 116, 3 Apr 12 20:42 midiC0D1
crw-rw----+ 1 root audio 116, 13 Apr 12 20:46 midiC0D2
crw-rw----+ 1 root audio 116, 14 Apr 12 20:46 midiC0D3
crw-rw----+ 1 root audio 116, 10 Apr 12 20:42 pcmC0D0c
crw-rw----+ 1 root audio 116, 9 Apr 12 20:43 pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Apr 12 20:42 pcmC0D1c
crw-rw----+ 1 root audio 116, 7 Apr 12 20:42 pcmC0D2c
crw-rw----+ 1 root audio 116, 6 Apr 12 20:42 pcmC0D2p
crw-rw----+ 1 root audio 116, 5 Apr 12 20:42 pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 12 20:42 seq
crw-rw----+ 1 root audio 116, 33 Apr 12 20:42 timer
CPU -------------------------------------------------------
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
RAM -------------------------------------------------------
MemTotal: 4051696 kB
SwapTotal: 51196 kB
Hardware --------------------------------------------------
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
05:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Interupts -------------------------------------------------
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 1 1 IO-APIC-edge i8042
6: 1 2 IO-APIC-edge floppy
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 1 IO-APIC-edge i8042
16: 529 493 IO-APIC-fasteoi uhci_hcd:usb1, pata_jmicron, nvidia
18: 10654 10645 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb4, uhci_hcd:usb8, firewire_ohci, i801_smbus
19: 3621 3626 IO-APIC-fasteoi uhci_hcd:usb7, snd_emu10k1
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb5, uhci_hcd:usb6
44: 7637 7652 PCI-MSI-edge ahci
45: 11719 11736 PCI-MSI-edge eth0
NMI: 47 47 Non-maskable interrupts
LOC: 49551 45081 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 47 47 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 28730 28313 Rescheduling interrupts
CAL: 94 54 Function call interrupts
TLB: 3503 3509 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
[christer@Arch ~]$
output from systemctl show somw inacive sound related sevices.
alsa-restore.service loaded inactive dead Restore Sound Card State
alsa-store.service loaded inactive dead Store Sound Card State
auditd.service error inactive dead auditd.service
display-manager.service error inactive dead display-manager.service
dmeventd.service loaded inactive dead Device-mapper event daemon
emergency.service loaded inactive dead Emergency Shell
lvmetad.service loaded inactive dead LVM2 metadata daemon
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
rc-local-shutdown.service loaded inactive dead /etc/rc.local.shutdown Compatibility
rescue.service loaded inactive dead Rescue Shell
systemd-...console.service loaded inactive dead Dispatch Password Requests to Console
systemd-...rd-wall.service loaded inactive dead Forward Password Requests to Wall
systemd-fsck-root.service loaded inactive dead File System Check on Root Device
systemd-...e8ee844.service loaded inactive dead File System Check on /dev/disk/by-uuid/9751ee37-e769-4bbe-9436-2d8e5e8ee844
systemd-...ev-sda2.service loaded inactive dead File System Check on /dev/sda2
systemd-...ev-sda4.service loaded inactive dead File System Check on /dev/sda4
systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon
systemd-...l-flush.service loaded inactive dead Trigger Flushing of Journal to Persistent Storage
systemd-...ed-load.service loaded inactive dead Load Random Seed
systemd-...ed-save.service loaded inactive dead Save Random Seed
systemd-...ad-done.service loaded inactive dead Stop Read-Ahead Data Collection
systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
systemd-...s-clean.service loaded inactive dead Cleanup of Temporary Directories
systemd-...unlevel.service loaded inactive dead Update UTMP about System Runlevel Changes
systemd-...hutdown.service loaded inactive dead Update UTMP about System Shutdown
ypbind.service error inactive dead ypbind.service
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
remote-fs-setup.target error inactive dead remote-fs-setup.target
rescue.target loaded inactive dead Rescue Mode
runlevel1.target error inactive dead runlevel1.target
runlevel2.target error inactive dead runlevel2.target
runlevel3.target error inactive dead runlevel3.target
runlevel4.target error inactive dead runlevel4.target
runlevel5.target error inactive dead runlevel5.target
shutdown.target loaded inactive dead Shutdown
syslog.target error inactive dead syslog.target
umount.target loaded inactive dead Unmount All Filesystems
All the best!
Christer
Last edited by agkbill (2013-04-15 18:41:03)Thank you mich41!
It looks like a kernel bug.
I downgraded to 3.7.10-1 then firmware loaded OK and I could play sounds.
Upgraded to 3.8.6-1 then the firmware fail to load.
Something looks not ok with 3.8.6-1.
Best regards,
Christer -
[FIXED] iSight on Macbook 2,1 - Firmware not loading
Running the default kernel, yet lsusb gives
Bus 001 Device 003: ID 05ac:8300 Apple, Inc. Built-in iSight (no firmware loaded)
and I have no /dev/video0. According to the Macbook ArchWiki page, I shouldn't need isight-firmware-tools. Here's my startup log from dmesg (relevant stuff appears to show up at about 4.38 seconds):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.8-1-ARCH (tobias@testing-i686) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 1 12:27:17 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be0f7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be0f8000-0x00000000be2f8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be2f9000-0x00000000bee4afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bee4b000-0x00000000bee70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bee71000-0x00000000bee7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bee80000-0x00000000beeaafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beeab000-0x00000000beeb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beeb7000-0x00000000beebbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beebc000-0x00000000beebdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beebe000-0x00000000beeeefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beeef000-0x00000000beefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beeff000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f00f8000-0x00000000f00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffb0000-0x00000000fffdffff] reserved
[ 0.000000] e820: update [mem 0xbaacb010-0xbaadb03b] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000baacb00f] usable
[ 0.000000] reserve setup_data: [mem 0x00000000baacb010-0x00000000baadb03b] usable
[ 0.000000] reserve setup_data: [mem 0x00000000baadb03c-0x00000000be0f7fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000be0f8000-0x00000000be2f8fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be2f9000-0x00000000bee4afff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bee4b000-0x00000000bee70fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bee71000-0x00000000bee7ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bee80000-0x00000000beeaafff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000beeab000-0x00000000beeb6fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000beeb7000-0x00000000beebbfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000beebc000-0x00000000beebdfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000beebe000-0x00000000beeeefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000beeef000-0x00000000beefefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000beeff000-0x00000000bfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f00f8000-0x00000000f00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fffb0000-0x00000000fffdffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbeefd000 ACPI 2.0=0xbeefd014 SMBIOS=0xbeebf000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x00000000018cc000) (8MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x00000000018cc000-0x000000007ef96000) (2006MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x000000007ef96000-0x0000000080000000) (16MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000080000000-0x00000000ba030000) (928MB)
[ 0.000000] efi: mem10: type=4, attr=0xf, range=[0x00000000ba030000-0x00000000ba078000) (0MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000ba078000-0x00000000baaca000) (10MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x00000000baaca000-0x00000000baadd000) (0MB)
[ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x00000000baadd000-0x00000000bae9e000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000bae9e000-0x00000000bcec6000) (32MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000bcec6000-0x00000000bced1000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000bced1000-0x00000000bcee8000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000bcee8000-0x00000000bcf12000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000bcf12000-0x00000000bcf17000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000bcf17000-0x00000000bcf27000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000bcf27000-0x00000000bcf2b000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000bcf2b000-0x00000000bdc19000) (12MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000bdc19000-0x00000000bdc1c000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000bdc1c000-0x00000000bdc51000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000bdc51000-0x00000000bdc52000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000bdc52000-0x00000000bdd11000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bdd11000-0x00000000bdd13000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000bdd13000-0x00000000be0f8000) (3MB)
[ 0.000000] efi: mem28: type=10, attr=0xf, range=[0x00000000be0f8000-0x00000000be2f9000) (2MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000be2f9000-0x00000000becf8000) (9MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000becf8000-0x00000000bed3a000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000bed3a000-0x00000000bee42000) (1MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000bee42000-0x00000000bee4b000) (0MB)
[ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000bee4b000-0x00000000bee71000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000bee71000-0x00000000bee80000) (0MB)
[ 0.000000] efi: mem35: type=6, attr=0x800000000000000f, range=[0x00000000bee80000-0x00000000beeab000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000beeab000-0x00000000beeb7000) (0MB)
[ 0.000000] efi: mem37: type=9, attr=0xf, range=[0x00000000beeb7000-0x00000000beebc000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000beebc000-0x00000000beebe000) (0MB)
[ 0.000000] efi: mem39: type=10, attr=0xf, range=[0x00000000beebe000-0x00000000beeef000) (0MB)
[ 0.000000] efi: mem40: type=9, attr=0xf, range=[0x00000000beeef000-0x00000000beeff000) (0MB)
[ 0.000000] efi: mem41: type=6, attr=0x800000000000000f, range=[0x00000000beeff000-0x00000000bef00000) (0MB)
[ 0.000000] efi: mem42: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem43: type=0, attr=0x8000000000000000, range=[0x00000000bef00000-0x00000000c0000000) (17MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000000, range=[0x00000000f00f8000-0x00000000f00f9000) (0MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000000, range=[0x00000000fffb0000-0x00000000fffe0000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook2,1/Mac-F4208CAA, BIOS MB21.88Z.00A5.B07.0706270922 06/27/07
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbeebe max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 4 base 000000000 mask F80000000 write-back
[ 0.000000] 5 base 080000000 mask FC0000000 write-back
[ 0.000000] 6 base 0BEF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x018ae000, 0x018aefff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7ef96000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x36794000-0x377fdfb9]
[ 0.000000] Move RAMDISK from [mem 0x7ef96000-0x7fffffb9] to [mem 0x36794000-0x377fdfb9]
[ 0.000000] ACPI: RSDP beefd014 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT beefd1c0 00006C (v01 APPLE Apple00 000000A5 01000013)
[ 0.000000] ACPI: FACP beefb000 0000F4 (v03 APPLE Apple00 000000A5 Loki 0000005F)
[ 0.000000] ACPI: DSDT beef0000 0041E4 (v01 APPLE MacBook 00020001 INTL 20050309)
[ 0.000000] ACPI: FACS beec0000 000040
[ 0.000000] ACPI: HPET beefa000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC beef9000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG beef8000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! beef7000 0000A0 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST beef6000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT beef5000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT beeb9000 0001DA (v01 APPLE SataAhci 00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT beeef000 0004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2166MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x018af000, 0x018affff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xbeebdfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xbe0f7fff]
[ 0.000000] node 0: [mem 0xbe2f9000-0xbee4afff]
[ 0.000000] node 0: [mem 0xbee71000-0xbee7ffff]
[ 0.000000] node 0: [mem 0xbeeab000-0xbeeb6fff]
[ 0.000000] node 0: [mem 0xbeebc000-0xbeebdfff]
[ 0.000000] On node 0 totalpages: 781317
[ 0.000000] free_area_init_node: node 0, pgdat c1707d00, node_mem_map f4fb4020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4334 pages used for memmap
[ 0.000000] HighMem zone: 554089 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xf00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f4f86000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779541
[ 0.000000] Kernel command line: root=/dev/sda5 ro rootfstype=btrfs systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch-fallback.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6256104 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000beebe)
[ 0.000000] Memory: 3038836K/3125268K available (4472K kernel code, 448K rwdata, 1320K rodata, 588K init, 972K bss, 86432K reserved, 2186224K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc171b000 - 0xc17ae000 ( 588 kB)
.data : 0xc155e74a - 0xc171a240 (1774 kB)
.text : 0xc1100000 - 0xc155e74a (4473 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2161.213 MHz processor
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 4324.52 BogoMIPS (lpj=7204043)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.024828] Security Framework initialized
[ 0.024845] AppArmor: AppArmor disabled by boot time parameter
[ 0.024847] Yama: becoming mindful.
[ 0.024866] Mount-cache hash table entries: 512
[ 0.025182] Initializing cgroup subsys memory
[ 0.025193] Initializing cgroup subsys devices
[ 0.025196] Initializing cgroup subsys freezer
[ 0.025199] Initializing cgroup subsys net_cls
[ 0.025202] Initializing cgroup subsys blkio
[ 0.025241] CPU: Physical Processor ID: 0
[ 0.025243] CPU: Processor Core ID: 0
[ 0.025246] mce: CPU supports 6 MCE banks
[ 0.025257] CPU0: Thermal monitoring enabled (TM2)
[ 0.025272] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.025387] Freeing SMP alternatives memory: 20K (c17ae000 - c17b3000)
[ 0.026346] ACPI: Core revision 20131115
[ 0.029337] ACPI: All ACPI Tables successfully acquired
[ 0.031575] ftrace: allocating 20090 entries in 40 pages
[ 0.040091] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073872] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (fam: 06, model: 0f, stepping: 06)
[ 0.076666] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076666] perf_event_intel: PEBS disabled due to CPU errata
[ 0.076666] ... version: 2
[ 0.076666] ... bit width: 40
[ 0.076666] ... generic registers: 2
[ 0.076666] ... value mask: 000000ffffffffff
[ 0.076666] ... max period: 000000007fffffff
[ 0.076666] ... fixed-purpose events: 3
[ 0.076666] ... event mask: 0000000700000003
[ 0.096743] CPU 1 irqstacks, hard=f44cc000 soft=f44ce000
[ 0.096746] x86: Booting SMP configuration:
[ 0.006666] Initializing CPU#1
[ 0.109977] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096748] .... node #0, CPUs: #1
[ 0.109995] x86: Booted up 1 node, 2 CPUs
[ 0.109999] smpboot: Total of 2 processors activated (8648.05 BogoMIPS)
[ 0.112323] devtmpfs: initialized
[ 0.112323] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.112323] PM: Registering ACPI NVS region [mem 0xbe0f8000-0xbe2f8fff] (2101248 bytes)
[ 0.112323] PM: Registering ACPI NVS region [mem 0xbeebe000-0xbeeeefff] (200704 bytes)
[ 0.112323] RTC time: 2:13:52, date: 04/03/14
[ 0.112323] NET: Registered protocol family 16
[ 0.112323] cpuidle: using governor ladder
[ 0.112323] cpuidle: using governor menu
[ 0.112323] ACPI: bus type PCI registered
[ 0.112323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.112323] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.112323] PCI: not using MMCONFIG
[ 0.125963] PCI: Using configuration type 1 for base access
[ 0.130090] bio: create slab <bio-0> at 0
[ 0.130110] ACPI: Added _OSI(Module Device)
[ 0.130110] ACPI: Added _OSI(Processor Device)
[ 0.130110] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130110] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.131070] ACPI : EC: EC description table is found, configuring boot EC
[ 0.133507] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.144021] ACPI: SSDT beeb8c10 0002AE (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.144265] ACPI: Dynamic OEM Table Load:
[ 0.144268] ACPI: SSDT (null) 0002AE (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.144381] ACPI: SSDT beeb8910 0002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.144605] ACPI: Dynamic OEM Table Load:
[ 0.144608] ACPI: SSDT (null) 0002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.153597] ACPI: SSDT beeb8f10 000087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.153830] ACPI: Dynamic OEM Table Load:
[ 0.153833] ACPI: SSDT (null) 000087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.153929] ACPI: SSDT beeb7f10 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.154154] ACPI: Dynamic OEM Table Load:
[ 0.154157] ACPI: SSDT (null) 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.173527] ACPI: Interpreter enabled
[ 0.173543] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.173549] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.173567] ACPI: (supports S0 S3 S4 S5)
[ 0.173569] ACPI: Using IOAPIC for interrupt routing
[ 0.173590] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.174736] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
[ 0.174741] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.174743] PCI: Using MMCONFIG for extended config space
[ 0.174760] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.174914] ACPI: No dock devices found.
[ 0.187223] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.187231] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.187699] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.188040] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.188044] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.188048] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.188051] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.188054] acpi PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.188057] acpi PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.188060] acpi PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.188063] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.188066] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.188069] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.188072] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.188075] acpi PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.188079] acpi PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.188082] acpi PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
[ 0.188085] acpi PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
[ 0.188088] acpi PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
[ 0.188091] acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.188094] PCI: root bus 00: using default resources
[ 0.188097] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.188289] PCI host bridge to bus 0000:00
[ 0.188294] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.188297] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.188300] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.188313] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.188442] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.188457] pci 0000:00:02.0: reg 0x10: [mem 0xd0380000-0xd03fffff]
[ 0.188465] pci 0000:00:02.0: reg 0x14: [io 0x20e0-0x20e7]
[ 0.188473] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.188480] pci 0000:00:02.0: reg 0x1c: [mem 0xd0400000-0xd043ffff]
[ 0.188609] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.188619] pci 0000:00:02.1: reg 0x10: [mem 0xd0300000-0xd037ffff]
[ 0.190132] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100
[ 0.190145] pci 0000:00:07.0: reg 0x10: [mem 0xd0444000-0xd0444fff]
[ 0.190315] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.190337] pci 0000:00:1b.0: reg 0x10: [mem 0xd0440000-0xd0443fff 64bit]
[ 0.190432] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.190548] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.190664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.190779] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.190894] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.191014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.191074] pci 0000:00:1d.0: reg 0x20: [io 0x2080-0x209f]
[ 0.191174] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.191228] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.191288] pci 0000:00:1d.1: reg 0x20: [io 0x2060-0x207f]
[ 0.191386] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.191437] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.191497] pci 0000:00:1d.2: reg 0x20: [io 0x2040-0x205f]
[ 0.191595] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.191648] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.191707] pci 0000:00:1d.3: reg 0x20: [io 0x2020-0x203f]
[ 0.191805] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.191871] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.191895] pci 0000:00:1d.7: reg 0x10: [mem 0xd0445400-0xd04457ff]
[ 0.191989] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.192048] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.192103] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.192280] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.192399] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
[ 0.192407] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.192412] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.192417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.192424] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.192557] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
[ 0.192576] pci 0000:00:1f.1: reg 0x10: [io 0x20d8-0x20df]
[ 0.192589] pci 0000:00:1f.1: reg 0x14: [io 0x20f4-0x20f7]
[ 0.192602] pci 0000:00:1f.1: reg 0x18: [io 0x20d0-0x20d7]
[ 0.192616] pci 0000:00:1f.1: reg 0x1c: [io 0x20f0-0x20f3]
[ 0.192628] pci 0000:00:1f.1: reg 0x20: [io 0x20b0-0x20bf]
[ 0.192752] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.192778] pci 0000:00:1f.2: reg 0x10: [io 0x20c8-0x20cf]
[ 0.192792] pci 0000:00:1f.2: reg 0x14: [io 0x20ec-0x20ef]
[ 0.192805] pci 0000:00:1f.2: reg 0x18: [io 0x20c0-0x20c7]
[ 0.192818] pci 0000:00:1f.2: reg 0x1c: [io 0x20e8-0x20eb]
[ 0.192831] pci 0000:00:1f.2: reg 0x20: [io 0x20a0-0x20af]
[ 0.192844] pci 0000:00:1f.2: reg 0x24: [mem 0xd0445000-0xd04453ff]
[ 0.192905] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.193010] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.193068] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.193303] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000
[ 0.193340] pci 0000:01:00.0: reg 0x10: [mem 0xd0200000-0xd0203fff 64bit]
[ 0.193358] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x10ff]
[ 0.193421] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.193520] pci 0000:01:00.0: supports D1 D2
[ 0.193523] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193561] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.193605] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193619] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.193625] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.193631] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.193763] pci 0000:02:00.0: [168c:0024] type 00 class 0x028000
[ 0.193793] pci 0000:02:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.193938] pci 0000:02:00.0: supports D1
[ 0.193941] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.193991] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.194036] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.194050] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.194059] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.194150] pci 0000:03:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.194175] pci 0000:03:03.0: reg 0x10: [mem 0xd0000000-0xd0000fff]
[ 0.194282] pci 0000:03:03.0: supports D1 D2
[ 0.194285] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.194405] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.194415] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.194424] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.194427] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.194458] pci_bus 0000:00: on NUMA node 0
[ 0.194667] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.194750] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.194831] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.194914] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.194994] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.195073] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.195152] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.195231] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.196881] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.196893] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.196941] Found 1 acpi root devices
[ 0.196975] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.197034] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.197034] vgaarb: loaded
[ 0.197034] vgaarb: bridge control possible 0000:00:02.0
[ 0.197034] PCI: Using ACPI for IRQ routing
[ 0.200581] PCI: pci_cache_line_size set to 64 bytes
[ 0.200654] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.200657] e820: reserve RAM buffer [mem 0xbaacb010-0xbbffffff]
[ 0.200659] e820: reserve RAM buffer [mem 0xbe0f8000-0xbfffffff]
[ 0.200662] e820: reserve RAM buffer [mem 0xbee4b000-0xbfffffff]
[ 0.200665] e820: reserve RAM buffer [mem 0xbee80000-0xbfffffff]
[ 0.200667] e820: reserve RAM buffer [mem 0xbeeb7000-0xbfffffff]
[ 0.200670] e820: reserve RAM buffer [mem 0xbeebe000-0xbfffffff]
[ 0.200795] NetLabel: Initializing
[ 0.200797] NetLabel: domain hash size = 128
[ 0.200799] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.200814] NetLabel: unlabeled traffic allowed by default
[ 0.200862] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.200869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.200875] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.202899] Switched to clocksource hpet
[ 0.207652] pnp: PnP ACPI init
[ 0.207675] ACPI: bus type PNP registered
[ 0.207781] system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved
[ 0.207785] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.207789] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.207792] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.207796] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.207799] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.207805] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208094] pnp 00:01: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.208143] pnp 00:02: [dma 4]
[ 0.208184] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.208229] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.208366] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.208371] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.208428] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.208468] pnp 00:06: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io 0x1000-0x1fff]
[ 0.208526] system 00:06: [io 0x0680-0x06ef] has been reserved
[ 0.208530] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.208533] system 00:06: [io 0x0810-0x0817] has been reserved
[ 0.208536] system 00:06: [io 0x0400-0x047f] could not be reserved
[ 0.208540] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.208544] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208593] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212349] pnp: PnP ACPI: found 8 devices
[ 0.212351] ACPI: bus type PNP unregistered
[ 0.250634] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.250654] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01] add_size 200000
[ 0.250667] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.250672] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.250687] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.250694] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.250698] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.250701] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.250707] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0500000-0xd07fffff pref]
[ 0.250712] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.250716] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.250721] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0500000-0xd051ffff pref]
[ 0.250725] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.250730] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.250737] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.250743] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd07fffff pref]
[ 0.250752] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.250756] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.250763] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.250770] pci 0000:00:1c.1: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.250778] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.250786] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.250798] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.250801] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.250805] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.250808] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.250811] pci_bus 0000:01: resource 2 [mem 0xd0500000-0xd07fffff pref]
[ 0.250814] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.250817] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.250820] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.250823] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.250826] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.250829] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.250879] NET: Registered protocol family 2
[ 0.251083] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.251103] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.251133] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.251164] TCP: reno registered
[ 0.251167] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251178] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251249] NET: Registered protocol family 1
[ 0.251265] pci 0000:00:02.0: Boot video device
[ 0.252430] pci 0000:00:1d.7: enabling device (0000 -> 0002)
[ 0.252740] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.252796] Unpacking initramfs...
[ 0.711581] Freeing initrd memory: 16808K (f6794000 - f77fe000)
[ 0.711803] apm: BIOS not found.
[ 0.711854] Scanning for low memory corruption every 60 seconds
[ 0.712353] audit: initializing netlink socket (disabled)
[ 0.712374] type=2000 audit(1396491231.709:1): initialized
[ 0.727981] bounce pool size: 64 pages
[ 0.727995] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.730140] zbud: loaded
[ 0.730279] VFS: Disk quotas dquot_6.5.2
[ 0.730349] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.730612] msgmni has been set to 1756
[ 0.730696] Key type big_key registered
[ 0.731049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.731109] io scheduler noop registered
[ 0.731112] io scheduler deadline registered
[ 0.731157] io scheduler cfq registered (default)
[ 0.731244] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
[ 0.731473] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.731596] pcieport 0000:00:1c.1: device [8086:27d2] has invalid IRQ; check vendor BIOS
[ 0.731773] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.731939] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.731942] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.731948] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.731975] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.731978] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.731984] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.732004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.732058] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[ 0.732098] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.732115] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[ 0.732151] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.732159] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.732240] intel_idle: does not run on family 6 model 15
[ 0.732271] GHES: HEST is not enabled!
[ 0.732286] isapnp: Scanning for PnP cards...
[ 1.089038] isapnp: No Plug & Play device found
[ 1.089104] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.089870] rtc_cmos 00:07: RTC can wake from S4
[ 1.090053] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.090089] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.090225] drop_monitor: Initializing network drop monitor service
[ 1.090318] TCP: cubic registered
[ 1.090466] NET: Registered protocol family 10
[ 1.090724] NET: Registered protocol family 17
[ 1.090736] Key type dns_resolver registered
[ 1.090918] Using IPI No-Shortcut mode
[ 1.091080] registered taskstats version 1
[ 1.091660] Magic number: 10:587:206
[ 1.091735] rtc_cmos 00:07: setting system clock to 2014-04-03 02:13:53 UTC (1396491233)
[ 1.091810] PM: Hibernation image not present or could not be loaded.
[ 1.092134] Freeing unused kernel memory: 588K (c171b000 - c17ae000)
[ 1.092258] Write protecting the kernel text: 4476k
[ 1.092297] Write protecting the kernel read-only data: 1324k
[ 1.101141] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 1.103059] systemd-udevd[48]: starting version 212
[ 1.105813] Linux agpgart interface v0.103
[ 1.107850] [drm] Initialized drm 1.1.0 20060810
[ 1.108901] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 1.109016] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.110230] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 1.110426] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.111004] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.111050] ACPI: Lid Switch [LID0]
[ 1.111122] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.111128] ACPI: Power Button [PWRB]
[ 1.111194] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.111198] ACPI: Sleep Button [SLPB]
[ 1.111287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.111291] ACPI: Power Button [PWRF]
[ 1.111681] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.111840] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.118232] [drm] Memory usable by graphics device = 256M
[ 1.118511] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.118513] [drm] Driver supports precise vblank timestamp query.
[ 1.118526] i915 0000:00:02.0: Invalid ROM contents
[ 1.118533] [drm] failed to find VBIOS tables
[ 1.118590] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.289208] [drm] initialized overlay support
[ 1.713356] tsc: Refined TSC clocksource calibration: 2161.249 MHz
[ 1.866111] fbcon: inteldrmfb (fb0) is primary device
[ 2.222132] Console: switching to colour frame buffer device 160x50
[ 2.227666] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.227669] i915 0000:00:02.0: registered panic notifier
[ 2.227679] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.271425] SCSI subsystem initialized
[ 2.274827] libata version 3.00 loaded.
[ 2.276074] ACPI: bus type USB registered
[ 2.276110] usbcore: registered new interface driver usbfs
[ 2.276125] usbcore: registered new interface driver hub
[ 2.276175] usbcore: registered new device driver usb
[ 2.277269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.277466] ehci-pci: EHCI PCI platform driver
[ 2.277706] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.277715] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.277734] ehci-pci 0000:00:1d.7: debug port 1
[ 2.281643] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.281670] ehci-pci 0000:00:1d.7: irq 21, io mem 0xd0445400
[ 2.282153] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.290028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.290299] hub 1-0:1.0: USB hub found
[ 2.290310] hub 1-0:1.0: 8 ports detected
[ 2.291047] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.291057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.291089] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
[ 2.291321] hub 2-0:1.0: USB hub found
[ 2.291332] hub 2-0:1.0: 2 ports detected
[ 2.291663] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.291671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.291701] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 2.292107] hub 3-0:1.0: USB hub found
[ 2.292118] hub 3-0:1.0: 2 ports detected
[ 2.292428] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.292435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.292482] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 2.292686] hub 4-0:1.0: USB hub found
[ 2.292697] hub 4-0:1.0: 2 ports detected
[ 2.293011] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.293018] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.293049] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 2.293454] hub 5-0:1.0: USB hub found
[ 2.293465] hub 5-0:1.0: 2 ports detected
[ 2.293800] ahci 0000:00:1f.2: version 3.0
[ 2.293994] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.294079] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode
[ 2.294084] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part
[ 2.299571] scsi0 : ahci
[ 2.300773] scsi1 : ahci
[ 2.301519] scsi2 : ahci
[ 2.301793] scsi3 : ahci
[ 2.301869] ata1: DUMMY
[ 2.301872] ata2: DUMMY
[ 2.301876] ata3: SATA max UDMA/133 abar m1024@0xd0445000 port 0xd0445200 irq 42
[ 2.301878] ata4: DUMMY
[ 2.301964] ata_piix 0000:00:1f.1: version 2.13
[ 2.303447] scsi4 : ata_piix
[ 2.303539] scsi5 : ata_piix
[ 2.303600] ata5: PATA max UDMA/100 cmd 0x20d8 ctl 0x20f4 bmdma 0x20b0 irq 18
[ 2.303603] ata6: PATA max UDMA/100 cmd 0x20d0 ctl 0x20f0 bmdma 0x20b8 irq 18
[ 2.333409] firewire_ohci 0000:03:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.473835] ata5.00: ATAPI: MATSHITADVD-R UJ-857E, ZB0E, max UDMA/66
[ 2.487059] ata5.00: configured for UDMA/66
[ 2.620034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.620400] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.620486] ata3.00: ATA-9: M4-CT256M4SSD2, 000F, max UDMA/100
[ 2.620490] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.620880] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.620967] ata3.00: configured for UDMA/100
[ 2.621138] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 000F PQ: 0 ANSI: 5
[ 2.622978] scsi 4:0:0:0: CD-ROM MATSHITA DVD-R UJ-857E ZB0E PQ: 0 ANSI: 5
[ 2.628440] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.628549] sd 2:0:0:0: [sda] Write Protect is off
[ 2.628553] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.628585] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.629901] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.629904] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.630101] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.630316] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 2.631133] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.681713] xor: measuring software checksum speed
[ 2.713345] pIII_sse : 6420.000 MB/sec
[ 2.746690] Switched to clocksource tsc
[ 2.746718] prefetch64-sse: 7302.000 MB/sec
[ 2.746721] xor: using function: prefetch64-sse (7302.000 MB/sec)
[ 2.803340] raid6: mmxx1 2408 MB/s
[ 2.833438] firewire_core 0000:03:03.0: created device fw0: GUID 001b63fffe882224, S400
[ 2.853355] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.860009] raid6: mmxx2 2773 MB/s
[ 2.916671] raid6: sse1x1 1464 MB/s
[ 2.973357] raid6: sse1x2 2019 MB/s
[ 3.030025] raid6: sse2x1 2715 MB/s
[ 3.086675] raid6: sse2x2 3448 MB/s
[ 3.086678] raid6: using algorithm sse2x2 (3448 MB/s)
[ 3.086680] raid6: using ssse3x1 recovery algorithm
[ 3.093280] bio: create slab <bio-1> at 1
[ 3.094419] Btrfs loaded
[ 3.095092] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.095774] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 3.161953] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.162678] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 3.178283] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 3.178935] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.189620] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.190409] btrfs: disk space caching is enabled
[ 3.201691] Btrfs detected SSD devices, enabling SSD mode
[ 3.573432] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.573617] systemd[1]: Detected architecture 'x86'.
[ 3.574987] systemd[1]: Set hostname to <archbook>.
[ 3.630096] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.630650] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.630731] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.630747] systemd[1]: Starting Remote File Systems.
[ 3.630908] systemd[1]: Reached target Remote File Systems.
[ 3.630942] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.631207] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.631227] systemd[1]: Starting Encrypted Volumes.
[ 3.631351] systemd[1]: Reached target Encrypted Volumes.
[ 3.631373] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.631421] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.631436] systemd[1]: Expecting device dev-sda6.device...
[ 3.631545] systemd[1]: Expecting device dev-disk-by\x2duuid-5b847583\x2de4cb\x2d444d\x2dac05\x2db3ec8f1c77ff.device...
[ 3.631698] systemd[1]: Expecting device dev-disk-by\x2duuid-462ff9d5\x2d22a9\x2d3b55\x2d9e3e\x2d39009d6be0b4.device...
[ 3.631849] systemd[1]: Starting Root Slice.
[ 3.643428] systemd[1]: Created slice Root Slice.
[ 3.643446] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.643611] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.643628] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.643774] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.643790] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.643940] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.643955] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.644108] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.644124] systemd[1]: Starting User and Session Slice.
[ 3.644482] systemd[1]: Created slice User and Session Slice.
[ 3.644503] systemd[1]: Starting udev Control Socket.
[ 3.644646] systemd[1]: Listening on udev Control Socket.
[ 3.644665] systemd[1]: Starting udev Kernel Socket.
[ 3.644803] systemd[1]: Listening on udev Kernel Socket.
[ 3.644820] systemd[1]: Starting Journal Socket.
[ 3.644991] systemd[1]: Listening on Journal Socket.
[ 3.645013] systemd[1]: Starting System Slice.
[ 3.645365] systemd[1]: Created slice System Slice.
[ 3.645389] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.646048] systemd[1]: Mounting Huge Pages File System...
[ 3.646809] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.650099] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.651287] systemd[1]: Starting udev Coldplug all Devices...
[ 3.657301] systemd[1]: Starting Load Kernel Modules...
[ 3.658127] systemd[1]: Mounting Debug File System...
[ 3.658754] systemd[1]: Starting Setup Virtual Console...
[ 3.659815] systemd[1]: Starting Apply Kernel Variables...
[ 3.660641] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.661627] systemd[1]: Starting system-urxvtd.slice.
[ 3.662195] systemd[1]: Created slice system-urxvtd.slice.
[ 3.662227] systemd[1]: Starting system-getty.slice.
[ 3.663290] systemd[1]: Created slice system-getty.slice.
[ 3.663319] systemd[1]: Starting Journal Service...
[ 3.664848] systemd[1]: Started Journal Service.
[ 3.677214] btrfs: use lzo compression
[ 3.677219] btrfs: use ssd allocation scheme
[ 3.677226] btrfs: enabling auto defrag
[ 3.677229] btrfs: enabling inode map caching
[ 3.677231] btrfs: disk space caching is enabled
[ 3.715284] vboxdrv: Found 2 processor cores.
[ 3.716708] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 3.722186] vboxdrv: fAsync=0 offMin=0x3c2 offMax=0xda9
[ 3.722268] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.722268] vboxdrv: Successfully loaded version 4.3.10_OSE (interface 0x001a0007).
[ 3.783071] vboxpci: IOMMU not found (not registered)
[ 3.816344] systemd-udevd[167]: starting version 212
[ 3.878200] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.881296] Monitor-Mwait will be used to enter C-1 state
[ 3.881307] Monitor-Mwait will be used to enter C-2 state
[ 3.881313] Monitor-Mwait will be used to enter C-3 state
[ 3.881394] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.881443] ACPI: acpi_idle registered with cpuidle
[ 3.882023] ACPI: AC Adapter [ADP1] (on-line)
[ 3.882099] Switched to clocksource hpet
[ 3.915143] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.915340] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.956144] intel_rng: FWH not detected
[ 3.983260] sky2: driver version 1.30
[ 3.983769] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
[ 3.984190] sky2 0000:01:00.0: irq 44 for MSI/MSI-X
[ 3.984693] sky2 0000:01:00.0 eth0: addr 00:19:e3:40:6b:e2
[ 4.006473] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.008040] ACPI: Battery Slot [BAT0] (battery present)
[ 4.009840] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.010988] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.014099] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.015212] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 4.015227] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.015235] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.015245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.015249] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.015257] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.015261] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.024430] cfg80211: Calling CRDA to update world regulatory domain
[ 4.025189] leds_ss4200: no LED devices found
[ 4.031105] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
[ 4.031395] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 4.031408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.066172] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 4.082340] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[ 4.083938] platform microcode: Direct firmware load failed with error -2
[ 4.083946] platform microcode: Falling back to user helper
[ 4.128874] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 4.140066] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 4.145181] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 4.161845] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.180225] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 4.181071] btrfs: use lzo compression
[ 4.181079] btrfs: use ssd allocation scheme
[ 4.181090] btrfs: enabling auto defrag
[ 4.181096] btrfs: enabling inode map caching
[ 4.181099] btrfs: disk space caching is enabled
[ 4.234922] applesmc: key=226 fan=1 temp=10 index=10 acc=1 lux=0 kbd=0
[ 4.247383] Adding 1048572k swap on /dev/sda6. Priority:-1 extents:1 across:1048572k SSFS
[ 4.264911] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.
[ 4.303293] input: applesmc as /devices/platform/applesmc.768/input/input10
[ 4.316157] iTCO_vendor_support: vendor-support=0
[ 4.318231] usb 1-4: Direct firmware load failed with error -2
[ 4.318239] usb 1-4: Falling back to user helper
[ 4.325798] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[ 4.325836] platform microcode: Direct firmware load failed with error -2
[ 4.325842] platform microcode: Falling back to user helper
[ 4.352238] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.362997] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.363053] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 4.371059] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.382811] Unable to load isight firmware
[ 4.382874] usbcore: registered new interface driver isight_firmware
[ 4.398462] random: nonblocking pool is initialized
[ 4.408160] systemd-journald[146]: Received request to flush runtime journal from PID 1
[ 4.451146] appletouch 2-2:1.1: Geyser mode initialized.
[ 4.451279] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
[ 4.451581] usbcore: registered new interface driver appletouch
[ 4.477422] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.505622] usbcore: registered new interface driver usbhid
[ 4.505625] usbhid: USB HID core driver
[ 4.511187] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input12
[ 4.516069] apple 0003:05AC:021A.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[ 4.516130] mousedev: PS/2 mouse device common for all mice
[ 4.518122] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input13
[ 4.520132] apple 0003:05AC:021A.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[ 4.526592] input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input14
[ 4.527505] appleir 0003:05AC:8240.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[ 4.544779] ath: EEPROM regdomain: 0x64
[ 4.544782] ath: EEPROM indicates we should expect a direct regpair map
[ 4.544785] ath: Country alpha2 being used: 00
[ 4.544787] ath: Regpair used: 0x64
[ 4.546745] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 4.555349] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.556184] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xfbea0000, irq=17
[ 4.290340] systemd-udevd[184]: renamed network interface eth0 to enp1s0
[ 4.580350] systemd-udevd[176]: renamed network interface wlan0 to wls1
[ 4.776795] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input15
[ 4.777809] hid-generic 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[ 4.778302] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input16
[ 4.779613] hid-generic 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
Any help would be appreciated.
Last edited by bb010g (2014-04-03 19:07:54)It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?
-
RSC does not get files correctly + inconsistent shading issues (Viste 64 bits)
We experience serious trouble with RH 7 update 1 on Windows
Vista 64 bits.
We work with a team on our software helpfile. When a member
starts typing in a topic RH checks out the file. When the topic is
checked-in RSC performs an undo check out and all the mutations are
lost.
Secondly, when we open RSC some files are yellow (shaded).
This is an option of RSC. When we get all topics, some topics stay
shaded. When we view differences, RSC says that the files are
identical.
Any help is greaty appreciated!
Casper Lange
AFAS ERP Software B.V.Adobe has confirmed (through the Dutch support team) that
they do not support RH7 in combination with Microsoft Vista 64
bits.
We downgraded to 32 bits and we have a much more stable
system.
I just wanted to share this information for anyone
interested. -
1.1.3 Firmware Not Working Correctly
For some reason, my 1.1.3 firmware does not work. If i go in to setting and about, it says i have 1.1.3 installed, but, i do not have the wiggle function nor do i have ANY of the 1.1.3 updates. Any advice on how to fix this would be apprecited.......Oh, and got 1.1.3 by restoring and updating it...
Thanks
~WADETo have access to all of the functions such as the new icons on the home screen and the ability to add web icons to the same screen. You need to install 1.1.3 (as you have done) but also purchase the Jaunary Update availbale through ther iTunes store.
Hope that helps
Maybe you are looking for
-
GL Account 92358 requires an assignment to a CO Object
Hello, Can anybody help me in resolving the above issue ? We have posted one document in Oct. 2007 with the Transaction Code - CO15. That document has debited "GL 92358 - Inventory Change-Finished Goods" in the "Non Business Area" with the Posting k
-
How to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar?
I was wondering how to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar? If I change a location in mavericaks it is updated in my iOS 7 calendar, but if I add travel time to an appointment, that does not show up on my iphone.
-
I've tried this once before, where I got a text message from a person, whom I would like to add to my contacts. Even though I tried it several times I did not succeed. Has anyone an idea of why and how to solve this? Best regards Steen
-
My screen when I am using Safari suddenly fills my entire screen, and there is no right hand corner button to push to manually shrink it. What to do? I can never even exit the program without quitting it.This has happened only within the last two day
-
Tab canvas + post-forms-commit + form_trigger_failure
Hi all, There is a tab canvas with eight tab pages in my forms. In the post-forms-commit form-level trigger there are controls based on some conditions before executing the processes. When the conditions in the controls are not met then a stop alert