V490 running solaris 9 with warning messages:

I have a V490 running solaris 9 with the full recommended patch cluster and the SFS_base packages (and the additional patches) installed.
Installed in the V490 is 1* SG-XPCI2FC-QF2-Z (dual 2Gb fibre card). On rebooting the v490 the follwing warning appears:
WARNING: fctl: ULP FCSM version mismatch; please upgrade FCSM
Does anyone know if this is a major issue and if so is there a fix?
I have never seem this message before as we usually use the X6768A and maybe there is some difference in the card.

I am having the same issue after installing the card "SG-XPCI1FC-QF4" on V490.
I have opened a ticket.
Is this a major issue or missing patches?.

Similar Messages

Reg: Uploading data with Warning Message

Hi,
I have searched the forum and found a lot of threads related with this. But nothing fits my scenario or I didn't get the solution correctly from them.
My scenario is I recorded a BDC. When I run it in foreground, sometimes I get warning messages based upon the data to be uploaded. But if I run it in foreground, I press enter and then data will be saved.
When I run the same BDC in background, the data won't be uploaded as I miss that pressing of Enter there. The thing is that, this warning could happen anywhere (any screen, any field). How can I handle this?
Regards,
Jubish

Hi,
You should sit with your functional consultant and do the recording part. He should be able to tell you where these warning messages can come. Or please check with him if you can avoid these warning messages. It becomes difficult to handle warning messages in BDC if we don't know where they might come.
So, once you know where these warning messages come, you can put additional code for enter in your BDC at that place. It should solve your purpose.
Thanks,
Archana

BI Publisher report ends with Warning Message for Pivot type reports..

Hi,
I had used BI reporting(xml publisher) to develop our all reports and registered in R12 and works fine for all the tabular/forms type reports but it fails with the warning message(colored in yellow) for Pivot type reports. The output comes in xml..
When I changed the pivot table type report to tabular it comes with pdf. No issues.I do not know how to solve this issue...
Please help me on this..
Thanks
Imran

Welcome to the forums !
Pl post details of OS, database and EBS versions, along with the complete error message.
HTH
Srini

Problem with Warning Message in Financial Transactions eg. F-02

Hello Experts,
I have implemented a BTE - SAMPLE_INTERFACE_00001025 as a Z_SAMPLE_INTERFACE_00001025 for Account related transactions say for eg. F-02.
I had to implement 2 scenarios :
1) In which system should display Error Message and stop the user to post FI transaction.
2) In which system displays a Warning message but allows the user to continue with the posting of FI transaction.
The Error message worked successfully as it halted the transaction. But the warning message is not appearing. System is directly posting the FI transaction without showing any warning message.
I also tried using a status message, but it did not work. Neither did Information message work.
Here is what I have used,
I have created a Message class zbudget in which I have specified the messages.
Message E000(zbudget) with var1 var2 var3. ............. This is working successfully.
Message W000(zbudget) with var1 var2 var3.............. This has failed.
Can you please help me out in this.

Yes, you are correct Deepak.
The warning message is getting overwritten by the final message "Document Number XXXX is posted in company code YYY".
Is there any way to display this warning message for some time limit. I tried to use Wait for '2' seconds. But this also did not work.
Please help me out as I am not getting any workaround for this problem.
Thanks,
Danish.

Help with Warning Message in FCE

I use MPEG Streamclip to convert MPEG files to Quicktime .mov files. When I import those files into FCE, I receive a warning message (for some files, but not all) that says:
The following media files are not optimized for FCE. It is highly recommended that you recapture the media to create new copies of the files to improve their performance for multi-stream playback.
Any idea what might be causing this to happen for some but not all files?

It appears that the mods have moved your post to the correct forum.
Here's a tutorial on using MPEG Streamclip: http://www.secondchairvideo.com/?p=739
Note that it is important that you use settings in MPEG Streamclip that will exactly match your FCE Sequence. For example, if you have a DV/DVCPro Sequence with 48khz audio at 29.97fps in FCE, then in MPEG Streamclip, you choose the DV/DVCPro NTSC compressor, set the quality to 100% and the audio to 48khz BEFORE you export.
-DH

Popup with Warning message

All,
In my custom page I want to display a warning message with OK button.... user should click on OK to continue the process....
What is the best way to address this requirement ???

Are you looking for a javascript popup or a confirmation page kind of soln.
If you are looking for a confirmation page kind of soln check OADialogPage samples in Toolbox tutorial
If you are looking for javascript popup check the site,
http://mukx.blogspot.com/2007/07/javascript-in-oa-framework.html
With regards,
Kali.
OSSI.

HT5634 iMac (Late 2006 20") with IOS Lion installed Windows 8 via BootCamp4, Then Upgrade to 8.1 Pro. Worked with warning message until today. How do I get out of Windows 8.1 to get back to IOS Lion.

Until today I was able to ignore the compatability issues warning (I know bad idea to ignore warnings) and move between IOS Lion and Windows 8.1 Pro partitions on my 20" iMac (Late 2006) with Intel processor. After restarting Windows and spending 1/2 hour waiting for it to update (after installing Office 365) Window works fine, but when I activiate BootCamp (from Windows) nothing happens. It opens and gives me the warning with the option to run the program anyway (like always) but it the program never starts. It stays in Windows. How do I get back to IOS 7 Lion so I can upgrade BootCamp 4 to BootCamp 5 which I just saw today as the solution...?

Power off your computer. Power up your computer, during power up press and hold the option key. When the boot manager appears select OSx.

Problem with Warning message

I use TableSorter from java web and when I run it gave me these warning. How can I fix this thank heaps.
C:\Project>javac -Xlint *.java
TableSorter.java:76: warning: [unchecked] unchecked call to compareTo(T) as a member of the raw type java.lang.Comparable
return ((Comparable) o1).compareTo(o2);
^
TableSorter.java:185: warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.List
sortingColumns.add(new Directive(column, status));
^
TableSorter.java:207: warning: [unchecked] unchecked call to put(K,V) as a member of the raw type java.util.Map
columnComparators.put(type, comparator);
^
TableSorter.java:312: warning: [unchecked] unchecked call to compare(T,T) as a member of the raw type java.util.Comparator
comparison = getComparator(column).compare(o1, o2);
^
4 warnings
Appreciate
Love

I am still relatively new to java and have a similar issue. I wanted to leverage Vector to create a self-sorting list (imposing a specific object type in the process).
public class FooList extends Vector {
    public boolean add(FooNode node){
        boolean result = true;
        int iInsertionPoint = 0, iListLength = 0;
        iListLength = this.size();
        switch(MyIndexType){
            case IndexByDouble:
                iInsertionPoint = find(node.lfKey);
                break;
            case IndexByLongInt:
                iInsertionPoint = find(node.iKey);
                break;
            case IndexByString:
                iInsertionPoint = find(node.sKey);
                break;
            default:
                result = false;
        } // switch
        if(iInsertionPoint >= iListLength)
            addElement(node);
        else
            add(iInsertionPoint, node);
        return result;
    } // FooList.add()
} // class FooListthe two add calls are methods inherited from Vector and produce the following warnings:
Compiling 1 source file to ...\build\classes
...\util\FooList.java:75: warning: [unchecked] unchecked call to addElement(E) as a member of the raw type java.util.Vector
            addElement(node);
...\util\FooList.java:77: warning: [unchecked] unchecked call to add(int,E) as a member of the raw type java.util.Vector
            add(iInsertionPoint, node);
2 warningsEspecially with my novice status, I really dislike warnings. Can anyone provide any suggestions on how to do this better or at least eliminate the warnings?

Counter with warning message

Hello,
I try to create a counter which counts every time a main VI is run. After 10 runs the counter needs to show a message on the screen which has to stay there untill a button is pressed. Also the counter needs to reset after those 10 runs.
Can anybody help me with this?
Thanx in advance
NAG, (labview newbee).

Hi,
write your counter in a file, read it every start, increase it, write again
and so on...
Niko

Can I run Solaris 10 with a Radeon 9550?

Hi!
I would like to install Solaris 10 on my x86, but I'm not sure if my Radeon 9550 is supported. The driver download center at ATi has only Windows and Linux. Does the Linux driver work? Or better, has Solaris 10 integrated support for this graphics board?
Thanks.

Solaris 10 x86 includes:
1. a radeon driver from Sun, for Xsun
2. the radeon driver from X.org, to be used with Sun's Xsun X11
server
3. a VESA driver frlom X.org, for Xsun
4. the complete X.org X11 server, including X.org's radeon driver
5. X.org with VESA
I don't know if your specific model of the Radeon 9550 will be
recognized without problem, but with five drivers to choose from
I'd say chances are quite good that it works.

I've been advised by Firefox to download a software update, but upon downloading, the bar with green lines running across it with the message 'Connecting to the update server' is just going on indefinitely; can you advise on this?

I was advised by Firefox to download and install an important software update. But the bar with green lines running across and saying 'connecting to the update server is going on indefinitely (about an hour now). Can you advise?
With Thanks,
Martin

Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.<br />
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

HT4623 I have just bought an iMac but when I try to connect my iPad with it it comes up with warning message saying I need to download iTunes version 10.6.3 or later. When I check for updates my iPad tells me that its upto date with OSI 6.1.3 how can I fi

Can anyone help? I have bought an iMac but when I try to sync it with my iPad it says I need to update the iPad to version 10.6.3 or later yet when I try to update the iPad it says it has the latest update which is 6.1.3 how can I fix this so I can sync the two?

Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com

Warning-Message in START-OF-SELECTION?

Hi there,
I have a question: Isn't it possible to write a warning-message in the start-of-selection-block? I have the following code:
START-OF-SELECTION.
IF s_matnr IS INITIAL.
    MESSAGE w036(z_mm).
ENDIF.
IF p_migo = true.
    MESSAGE w059(z_mm).
ENDIF.
SELECT * FROM mara
But when I run this program the warning-messages appear as normal errors and not as warnings. Why is this so? I can't understand this behaviour?
I wanna to warn the user if he is selecting to much data because of missing information in the selection-screen...
If I use the AT SELECTION-SCREEN-block, the messages works fine, but the the messages also appear if the user clicks on the extension button of a select-option, and that I wanna to have.
Thank you
Regards
Markus

Hi,
You can get the warning messages as you required when you use the validation in
        AT SELECTION-SCREEN ON 'filed_name' .
If you do this validation in AT SELECTION-SCREEN OUTPUT.
then the warning message will appear as soon as the selection screen appear.
so use it in the AT SELECTION-SCREEN ON 'field_name'.
****Reward if useful.
With Regards,
Sunny.

Unable to install NMS 4.15p7 on Sparc 10 running Solaris 8

I have try to install NMS 4.15p7 on Sparc 10 which is running Solaris 8 with Recommended patch Dec-04-2001. After installed it and try to start server, there is some error messages related to "libsh.so".
[slapd-niss05]: starting up server ...
Attempting to obtain server status . . .
Attempting to obtain server status . . .
error:ld.so.1: ./ns-slapd: fatal: ../../../lib/libsh.so: bad ELF flags value: 256
error:Killed
error:server:The server could not be started.
system_errno:2
ERROR. Failure installing Netscape Directory Server. Do you want to continue [n]?
Please help
Lucas

This is more of a directory server question as it's the directory server failing to start and not the Messaging server.
But, if you do the following in the /lib directory what is the output?
#file libsh.co
-Chris

Warning Message in status bar

Hi all,
I have an enhancement in which i need to pass a custom warning message through badi ' INVOICE_UPDATE ' in the status bar for TCode MIRO, i am able to display the message with a popup screen but i am unable to display it into status bar.
How can i display that warning message in the status bar ?
can we pass the custom warning message through a BADI into the status bar ?
Thanks & Regards,
Pooja Joshi

if your system settings are normal system warning message will always come in the status bar only
any way click on customizing of local layout icon in standrad tool bar (in any screen),
goto options
inthat see the options tab, in that ,if check box wiht 'dialogue box with warning message' is checked ,
un check the check box,
click on OK
now execute your code normally and see

V490 running solaris 9 with warning messages:

Similar Messages

Maybe you are looking for