V490 server not able to type at ok prompt

Hello Guyz
The problem is that when I power on the server with max diag post it will drop at ok prompt with all post result passed. But I am not able to type anything at ok prompt. Input device & Output device are set to ttya when checked from os console. Since autoboot parameter is true it will boot automatically when i do a normal power on. RSC is not configured and I am not getting anything on it. Also graphics card not available in server.Troubleshooting steps done till now.
1. Powered on server in normal mode and with disk drives removed. It will stop at ok prompt with error cant boot. But not able to type anything.
2. Replaced PCI riser card which includes NVRAM.
3. Tried powering on the server with all minimum configuration possible still no luck.
4. Swapped the only one system board to other one and checked.
My seniors suggested to replace system board. What you guys think? Please help. Thanks..

midhu wrote:
I am using putty software and cisco cable with usb-to-serial converter which is connected to ttya port of server on one end and usb port on my laptop for getting the console of server. Also I am using default baud rate which is 9600.That all seems fine, except...
Historically, USB-to-serial adapters will often just fail to function in such circumstances.
There are numerous posts in these forums that go bazck more than a decade (through migrations from old Sun forums, even) that mention such USB adapters. They're not necessarily broken to where you need to replace it. They often just do not work. They won't send/receive the duplex signals you hope to have so that `send` at the laptop becomes `receive` at the V490, and `send` at the V490 becomes `receive` at the laptop. The symptoms are as you described: you can see but not type, or you can type but not see.
I suggest you go beg, borrow, or claim by eminent domain an old computer that has an actual hardwired serial port and try again.
I know. All this shouldn't be that hard, and it's frustrating. It should "just work".

Similar Messages

  • Not able to type a password when trying to create a domain

    Hi,
    I am trying to create a domain and in that wizard, in Administrator name and password for weblogic user, I am not able to type the password. Whatever I type it doesn't get reflected in the UI . if I press Next button Error comes as password is mandatory. I am using Linux OS.
    P.S. I am able to type in Name and description fields.
    Kindly advise.
    Regards

    If anyone else face this issue, then here comes the resolution -
    Password Field Not Editable in Domain Template on Linux
    Bug: 10394900
    Added: 01-May-2011
    Platform: Linux
    On Linux, when creating a new domain using a developer template in the Oracle Fusion Middleware Configuration Wizard, the password and confirm password fields are not editable, and you cannot enter a password to create a domain.
    Workaround: Do one of the following:
    To work around the issue each time it occurs: Click the close window "x" button in the upper right corner of the Configuration Wizard. In the confirmation dialog that appears, click "No" to return to the Configuration Wizard. Now you can enter the password and confirmation password.
    To fix the issue permanently:
    Kill a scim processes. For example, kill "pgrep scim"
    Modify (or create) the file ~/.scim/config to include the following line:
    /FrontEnd/X11/Dynamic = true (follow case sensitivity)
    If you are running VNC, restart the VNC server.
    Run the Configuration Wizard again.
    Regards,
    Anuj

  • I am trying to authenticate at Filevault preboot using external Serial (RS232) to USB convertor where USB port is connected to my mac machine.But on preboot I am not able to type the password using console where my machine is connected.

    I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
    I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
    I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
    This connector is detected as a USB 2.0 composite device in System Hardware table.
    Can someone hints or point out a potential cause or to rectify this issue.
    Thanks in Advance.

    Which os version are you using? 
    Which iPod Nano model do you have?  iPod Models 
    iPod not recognized in iTunes and Mac desktop 

  • Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

    Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

    Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:

  • I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

    i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

    Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
    Regards,
    Steve

  • MacBook Pro - After Battery dies I'm not able to type in login window, until forcing a restart

    Hi, as mentioned in the header : MacBook Pro - After Battery dies I'm not able to type in login window, until forcing a restart
    After the battery drains to 0% the computer switches off.... *Makes sense*
    Once I put the charger power chord back in for an extended period of time I hit the power button and then see the login screen.... *Makes sense*
    However it won't let me type into the login box therefore having to force a restart and lose any saved data or data open when it died of battery. *WEIRD*
    This happens every time my computer runs out of battery. I understand that obviously not letting the laptop die is a good idea, however it seems like there is something wrong as it allows me to login yet won't let me type anything...
    Any solutions? Anyone else experience this?
    I have an early 2012 MacBook Pro - 15 Inch Screen.

    Hi s4mboy,
    Thanks for visiting Apple Support Communities.
    I'd start with resetting the SMC and PRAM on the MacBook Pro:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/ph11243
    Cheers,
    Jeremy

  • Not able to type in arabic in reports builder 6i

    hi
    i have the language arabic in my PC ie i am able to type word documents in arabic,
    i have to do arabic report in apps 11 i ,the report builder i have is 6i
    i set NLS_LANG to ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 in the registry before opening reports builder but still i am not able to type in arabic in reports builder 6i
    kinldy guide me
    thanking in advance

    Hi,
    i set NLS_LANG to ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 in the registry before opening reports builder but still i am not able to type in arabic in reports builder 6iWhat do you mean by you are not able (is it garbage or you cannot use the Arabic keyboard)?
    Can you view any Arabic report (labels/text/data ..etc)?
    Regards,
    Hussein

  • I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

    I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I got another mail regarding mountain lion free upgrade program !! But its saying OS X server not able to download ?

    I got another mail regarding mountain lion free upgrade program !! But its saying OS X server not able to download ?
    Plz Help

    You are not alone in this, Maddy. I had the same thing happen. Apple obviously sent incorrect codes that redeemed for OS X Server instead of Mountain Lion. I called Apple Care who said that it must be some server fluke and that they would get back to me within 24 hours.

  • BPEL server not able to handle load -- need to purge instances

    Hello All,
    I have deployed one BPEL process on 10.1.3.1 server. This process creates new instance every 1 minute. If this is not retired and kept running continuously it creates many instances (e.g. 3k - 11k) & at one stage not able to create & initiate new instance. Then currently we are purging all instances and then its working fine.
    How much load BPEL server can handle? And also would like to know how to increase this capacity. As in the production env we 'll face issue due to this.
    Kindly suggest.
    I need help.
    Thanks in advance
    Regards

    How much load BPEL server can handle? And also would like to know how to increase this capacity. As in the production env we 'll face issue due to this.
    It all depends on how many CPU you have on the SOA Suite server and how much memory you have allocated and the number of threads that are configured. You should plan perfomance tests and scale up / down your environment.
    http://orasoa.blogspot.com/2007/01/tuning-bpel-in-nutshell.html

  • Peoplesoft App Server - Not able to boot Domain

    Hi all.
    I've installed Peoplesoft 9.1, PT8.52 (Oracle 11G 64 bit database) on windows 2008 server 64bit and an HRMS DEMO DB on a Virtual machine PSDEMOVM.
    I also installed Oracle 11G client 32, and configured a PS client workstation on another virtual machine PSDEMOVS
    I did all the steps and now, from the server machine, I entered PSADMIN and created a domain following all the configuration steps.
    I am not able to serial boot this domain, it shows the following errors:
    'Error Application Initialization failure
    Error: Fatal Error Encountered, initializing user error handler'
    And the appserver.log file shows the following errors:
    'PS General SQL Routines: Missing or invalid version of SQL Library PSORA (200,0)
    Database Signon: Could not sign in to database PSHRDEMO with user PS'
    So I thought it is because the unavailability of the Lib32 on the server machine.
    So I installed Tuxedo on the client machine, to be able to access psadmin from there.
    But unfortunately, when I choose to administer domain from the client machine, I am not able to see the domain that was created from the server, and when trying to create a new one, it says 'No available templates'.
    I really need guidance through this asap.
    Best Regards and Thx,
    Bechara
    Edited by: 964365 on Oct 30, 2012 3:37 AM
    Edited by: 964365 on Oct 30, 2012 3:41 AM

    PeopleTools 8.52 on Windows does indeed require the 32 bit client to connect to the database. If you're getting an "invalid version of SQL library PSORA" that means that the Application server is using the incorrect Oracle client to connect to the database. There's an "Add to Path" variable under domain settings in the Application server domain configuration file which has to point to the 32 bit client BIN directory.
    In short; navigate to the PS_HOME on the server PSDEMOVM (if your PS_CFG_HOME is the same as PS_HOME, otherwise this directory will be under %USERPROFILE%\psft\pt\ by default or the directory which you specified). Open the appserv directory and open the directory with the name of your domain. Locate the configuration file for your domain ({DOMAIN}.cfg) and open it in notepad. Scroll down until you reach the domain settings and change the add to path variable to point to the bin directory of your 32-bit client.

  • Actuals in P6 Professional - not able to type them in?

    This must be a simple one
    I'd like to be able to store actuals against the resource assignment, in the resource assignment window.... but it's greyed out. Any suggestions as to why?
    This client is using version 6.2.1 - I cant seem to find anything about this online and every YouTube video I've seen glosses over it, as if no-one wants to approach the obvious subject.
    I can change the budgeted units, change the remaining units... I can add a column in the resource assignments layout, but not amend it on the spreadsheet.  is that just the way it is?  Or am I missing something...?
    Blue line highlighted below shows where the actuals have been added, I'd like to be able to type them into the spreadsheet and see them appear there too!

    Took a look and this is from the online help:
    Use the Resource Usage Spreadsheet to display resource usage over time. You can display spreadsheet fields for budgeted or planned, actual, or remaining values, or you can customize the spreadsheet fields. If you have the appropriate security privilege, you can manually enter/edit values for budgeted or planned and remaining (early) units. To show or hide the Resource Usage Spreadsheet, click the Layout Options bar, then choose Resource Usage Spreadsheet, or click on the Top Layout toolbar.
    Since it specifically leaves out Actuals I am guessing its not possible. You would have to submit it for a feature request.

  • Windows 2008 R2 RADISU Server not able to authenicate Newly created AD Users on Wireless

    I have a AD running on Windows 2003 R2 with Functional Level as Windows 2003 and Windows 2008 R2 serving as RADIUS Server to authenticate Wireless Users.  Suddenly since a week newly created AD users are not able to connect to Wireless where as old
    users have no issue.
    Could anyone suggest what would be the issue.

    Hi,
    Which authentication method you are using? If you are using a certificate based authenticate method, you should confirm that the clients has got
    the correct certificate.
    In addition, is there any errors in NPS log?

  • Serial # not able to type letters

    its not possible to type in letters of my serial number to license my product in the adobe application center. i only can  type in the numbers but then 7 characters are missing (the 7 letters). how am i supposed to continue?

    Redemption Code Help
    Mylenium

  • I am not able to type in word,what is the solution?

    I am using os yosemite after installing it I could never able to type anything in word.

    You should contact Microsoft for Mac Support  and/or post in their forums.

Maybe you are looking for

  • Editing forms in Adobe reader.

    I have recently started using Adobe Acrobat X Pro.  When I create a form and email it to the person that I would like to fill out the form,  that person in turn can not complete the form if they do not have the full adobe acrobat program.  They have

  • Premiere wont open, nothing, no error, just nothing!

    Last night I was using the software working on a video, I did not finish my video, I saved it, closed the program and went to bed, today I try to open the program and I can not open it, nothing happens, no error message, nothing, just absolutely noth

  • Question on Upgrade Process

    I have two GW12 servers, one with the primary domain and po the other has a secondary domain and gwia and dva (Windows 2008R2). Can I have both servers agents down when I upgrade the primary domain/post office to GW2014 and then upgrade the secondary

  • Trigger Table

    <pre> i have audit table as below CREATE TABLE DS_JOB_LOG JOB_ID NUMBER, JOB_NAME VARCHAR2(200), LOAD_DATE TIMESTAMP, i am trying to write a trigger which does the job of inserting one sequence number kind of thing for the column JOB_ID in DS_JOB_LOG

  • Rotating a BufferedImage

    I have been rotating a BufferedImage using the following code where m_Image is the BufferedImage: AffineTransform trans = new AffineTransform(); AffineTransformOp op = null; int imgWidth = m_Image.getWidth(); int imgHeight = m_Image.getHeight(); tran