V52 firmware update for XM 5800 NAM

Does anyone know when is firmware V.52 be available for XM 5800 NAM in the US?? I read many forums on the net and they have already been available since Nov 2010 for other regions but US. Since many users noted that the performance of the phone has been greatly improved since, it is really annoying for us to have waited for so long.

If you're phone is network branded, you would have to take it up with them. The networks receive the updates immediately as it becomes available, and they still make their own customizations for it. Its normal for network branded phones to be behind in terms of updates for months, and in some cases, they stop updating all together.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

Problem with Firmware update for nokia 5800 xm ver...

I updated my nokia 5800 xpressmusic yesterday to version 40.0.005 and everything is ok, apart from I can't access my dialer or my contacts from my home screen, so how is it possible to make any calls? Can anyone help me please?
Solved!
Go to Solution.

jjegen seems to have differently than I. From what I see, tapping on the dialler and contacts on homescreen does nothing?
Your phone settings have had trouble. I would suggest restoring factory settings.
Go to MainMenu>green button>you will see the dialler. Type in *#7780# and enter your security code.
If that does not work:
Soft reset is *#7370# - this deletes all data on phone memory so make sure you have a backup.
OR
A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Is there anymore updates for Nokia 5800 XM??

Hi, I would like to know if there is anymore firmware updates for Nokia 5800 XM after V52.0.007?
Can anyone provide me with the news?
I am a huge fan of Nokia and their Symbian platform.. But I am getting more and more disappointed with them.
I cannot use another OS. Cannot use new softwares. Very slow and low hardware and performances..
I was hoping to get a Symbian ^ 3 update for my 5800 but that is not possible... So I have decided to see the last firmware update for 5800 and see if its any good. Otherwise I'll simply throw it away and start using HD2.

There are rumors about a v60 coming out, but I quite doubt it... and even if it comes it will most likely be a failure...
Nokia has done so much stuff wrong latelly (even Symbian^3 devices are filled with bugs and issues) and doesn't commit into fix them before launching something new based on the old ones.
This angers the users and most likely drivens them away... Nokia was once one of the biggest (if not the biggest) name in smartphone industry... now ... iPhone, Android based and even the dieing Blackberry are way ahead of them ... only 'dumbphones' on Nokia worth some consideration...
If you think 5800 has issues then don't look at it's more expensive brother ... the N97... so much for a top of the line phone...
Nokia has the firmware so fragmented that makes Android look like an homogeneous mass of software...
Because how some companies work, I start a personal blacklist of devices/brands that will never buy.... Apple and Sony are on the top of that list, Nokia will soon join them :[
Well... true to be said, I have 2 old 'dumbphones' - one of them has a 3.2MP camera with OPTICAL zoom, while it has 6~7 years more than 5800 it beats it in screen quality, camera quality and build quality, it also cost half the value of it - that I would most likely return to once 5800 dies... because it will die...
5800xm on a blender ... will happen sooner than expected.... v51 is a failure as an update .... v52 just postponed its fate....

Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

Hello Apple Support Communities,
I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
Here are the specs that the page requested me to find:
Model Identifier:          iMac10,1
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.52f9
Someone please help, this has been bugging me for a while.

I took all the precautions and asked all the questions,
Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
http://www.hddfancontrol.com/
BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

Is there any way to get firmware update for my DVD-RW Drive from Ultra 40?

Hi, I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
While I do enjoy working on my U40 workstation, its DVD-RAM drive is wll pretty bad.
It just fails to burn DVD/CD-R/RW media too often.
Yes, I got it serviced, but it's just the same.
So my final hope is to get the latest firmware, becuase latest firmware often solves such media compatability issues.
Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
I did contacted Matshita for this matter and they tell me to contact Sun. But I cannot even find email address for Sun Support or any. sigh...
Thanks.
Sang

Hello Sang,
I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
I did contacted Matshita for this matter and they tell me to contact Sun.
I did review the Full Components List for the Ultra 40. The only DVD drives listed (Part No. 370-7970) are Panasonic UJ-485 and Teac DV-W28SLA-093. Both aren't capable of reading or writing DVD-RAM.
In some countries Panasonic uses Matshita as brand name.
I did a search on SunSolve with the keywords DVD firmware.
Sun supplies only firmware updates for two DVD readers: Toshiba DVD 1401 (fixes: unable to boot from Solaris 8 DVD) and Toshiba SD-C2732 (fixes: returns incorrect data).
I was unable to update the firmware of the SD-C2732 (Sun part) with the Sun patch. The drive was attached to an Ultra 10 (with an adapter). I ended attaching the drive to a PC and using a DOS boot floppy with the Toshiba flash program and the Sun firmware.
Regarding you problems with the drive: Have you tried another brand of media. The Ultra 40 is under warranty (GA date was February 14, 2006).
Use the contact information from your other thread.
If you search the net for firmware you can locate sites that offers region-code-free firmware for several drives. Usually they provide a flash program (requires creation of a DOS boot floppy). Using these programs/firmware voids your warranty. Maybe you can not revert the firmware upgrade.
These slimline drives have no jumpers, the installed firmware (of the drive) determines if the drive is master, slave, uses cable-select (CS) or reversed CS.
Michael

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

How do i install firmware updates for time capsule?

How do I install firmware updates for time capsule?

If you are using the Lion or Mountain Lion operating system on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
A message will be displayed if there are any available updates. Click to update if that is the case.
If you are using the Leopard or Snow Leopard operating system......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, the click Manual Setup
Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

WHY DOESNT NOKIE POST MORE FIRMWARE UPDATES FOR OT...

I AM NEW TO THIS BOARD AND HAVE FOUND THAT NO MATTER WHAT I DO TO UPDATE MY NOKIA 6230i (FIRMWARE AND RADIO SOFTWARE)I MEET A BRICK WALL.
IT SEEMS NOKIA ARENT INTERESTED IN GIVING YOU SUPPORT ONCE YOURE PHONE IS ANY MORE THAN A YEAR OLD.
THIS TO ME IS VERY UNFAIR AS I HAVE SPENT A LOT OF CASH ON THIS PHONE TRYING TO UPDATE VISUAL RADIO USING THE DIRECTIONS PROVIDED WITH NO SUCCESS AS THESE DIRECTIONS DO NOT WORK AS I CANT FIND ANYWHERE TO DOWNLOAD THE THE NEW VISUAL RADIO WHILEST ON WAP.
THIS TO DATE HAS COST ME £75 TRYING TO FIND THE LINK.
ALSO I HAVE BEEN ASKING FOR THE FIRMWARE UPDATE FOR THE 6230i AS I SEE THIS AS BEING FAIR AS EVERY OTHER MOBILE THAT IS BEING POSTED CAN BE UPDATED OVER THE AIR AND THROUGH SOFTWARE UPDATE.
WHY CANT MINE AND MANY OTHERS.
EVEN IF NOKIA POSTED THE LAST RELEASED FOR EVERY MOBILE EVEN FOR THE OLD ONES I WOULD BE VERY GREATFUL .
MY NOKIA HAS A VERY OLD FIRMWARE V3.40 THIS NOKIA KNOWS IS FULL OF BUGS AND SHOULD BE HELD ACCOUNTABLE FOR POSTING THE FIXES UNTILL THERE ARE NO BUGS TO SORT WITHOUT EXCESS COST OR HAVING TO VISIT A RECOMMENDED REPAIR DEALER.
I WANT IT FREE JUST LIKE THE NEXT GUY SO NOKIA POST THE FIRMWARES AS SOON AS POSSIBLE AS I AM COMPLETELY FED UP WITH THIS FONE AND ITS BUGS.
YOURS SINCERELY
AN UNHAPPY CUSTOMER

First of all, please locate the Caps Lock key of your keyboard; all upper case text is hard to read, and traditionally considered as shouting. Of course, you may already know that, and intended to shout.
Anyway, most phones do not have the built-in support for do-it-yourself firmware updates.
For such phones your options are (if you think you need a firmware update):
- Take/send the phone to an authorized Nokia service/repair center, where the update can be done.
- Buy relativelt expensive flashing equipment and locate illegally distributed firmware files and try it on your own with that.
My advise is to go for the former rather than the latter option. The former should cost you anything (at least not for as long as the phone is under warranty & excluding what it takes for you to go there).
As to downloading "THE NEW VISUAL RADIO WHILEST ON WAP", I don't know what you mean by that. I don't know a 6230i, but either it comes with Visual Radio built-in or not. Any updates/fixes to it would come with a firmware update, but not over WAP.
Note also that you don't need the Visual Radio service to listen to FM radio channels, and most radion stations do not support the "Visual" bit at all (if they do, the support is indicated in the station directory in the radio app on the phone).

Where is the firmware update for my ipod touch

I recall that there was a firmware update for my 1st Gen Ipod Touch. I did not do it at the time, but would like to do the update now to the most current firmware available for my touch. I am now on version 2.2.1 (5H11) Can anyone tell me where I can find the newer firmware? Is there any benefits to the new firmware or should I just leave it as is?

Purchasing iOS 3.1 Software Update for iPod touch (1st generation) - http://support.apple.com/kb/HT2052
https://discussions.apple.com/thread/3009667

Remote Supervisor Adapter II SlimLine Firmware Update for TD100

According to Lenovo document 54Y6198 I should be able to go to http://www-947.ibm.com/systems/support/oem/td100.html and download the firmware updates for the Remote Supervisor II Slimline adapter we purchased for our new Lenovo TD100 server (Model 6429-18U). However, the problem is that NONE of the links work and NONE of the files can be downloaded all I get is a web page listing a 404 error (Not Found).
Naturally the adapter won't work without the proper firmware, please help!

Try now, it works. there have been some issues which are fixed.
Jan Solar
Product Marketing
(not a technical support)
http://blog.lenovo.com/author/jsolar/

Firmware Update for my blackberry 8830 world edition with Bell Canada

Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?

You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5.

How to run a firmware update for buffalo tech NAS

I downloaded a firmware updater for a Mac to run the install of a firmware update to a Buffalo Tech NAS LinkStation. Mavericks tells me it can't run this because it is from an unidentifed developer. Nice.. I need a workaround if that is possible.

Here you go:
http://support.apple.com/kb/PH14369

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E?

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E? I'm trying to burn a DVD using iDVD on my iBook. The blank DVD's are Memorex 16x (I've used Memorex 8x successfully in the past), the DVD drive is specified above. The finder tells me that the drive has reported an error "sense key=medium error/ sense code=0x73, 0x03" I couldn't find firmware updates in either Panasonic Matshita or Apple websites. Am I forever confined to 8x DVD-R's with this laptop?
ibook G4 Mac OS X (10.4.7)
ibook G4 Mac OS X (10.4.7)

First, welcome to the discussions.
Sorry, No Firmware update to allow you to burn at 16X.
The drive you have is only capable of burning at 8X.
You will also find that for the most part when you recieve errors that it is more often than not attributed to MEDIA.
There are so many problems with the cheaper media they are to numerous to cover.
DVD is not at all like CD burning, in that the technology as well as the Optical Drives used, seem to be touchy, and require the use of good Media. This will allow you trouble free burning without errors.
http://www.digitalfaq.com/media/dvdmedia.htm
You will also find that the reason that DVD-R Media works the best, is because it is the most wirely used and recognised in both Computers and Players.
If I may suggest. There are several 16X DVD's on the market.
Take your time and look at the back of the Jewel Cases and read. You will see that the better Media will tell you that it will burn at 1X through and including 16X, if your drive is capable of handleing these speeds. I prefer Maxell 16X DVD-R Media in the individual Jewel Cases. This Media burns at the slower speeds on the older Superdrives that will only burn at 1X or 2X.
Like many others I have learned my lessons the hard way.
Cheers Don

Firmware Update for Samsung PM851 Family SSD's

Just purchased a Yoga 2 Pro and found that it came with a Samsung MZMTE256HMHP-000L1 256 GB SSD. This is a member of the Samsung PM851 SSD family, which is essentially an OEM clone of the PM 840 EVO. The 840 Evo has well documented slowdown problems, and as a result, Samsung has released several firmware updates to address the issue. Several other OEM's have released firmware updates for their OEM versions. However, Lenovo has not. Is there a way to update the firmware of this SSD that I'm not finding? Supposedly Samsung Magician won't work. Thanks,C

Lenovo did release an update utility for the Thinkpad series. Will this work with the Yoga 2 Pro?

Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

I have a few of these RAID cards in a couple servers, and then I have an earlier version of the RAID card in a few different servers.
The earlier servers are running non-apple 1.5 TB drives. It will be interesting to learn if this firmware update will indeed allow me to boost the capacity by installing non-apple drives, as the firmware previously has not.
Ohh I'm excited to update and try! This will greatly help out if it does!

V52 firmware update for XM 5800 NAM

Similar Messages

Maybe you are looking for