V557 File Tansfer Errors... but not every time

I have been able to browse and transfer files 3 times (and unable countless times). Only once under 10.4.5 then the second time after updating to 10.4.6 and then one more time after deleting preferences (which I cannot re-produce). I have tried rebooting, powering bluetooth, phone, computer off & on, pulling batteries, repairing permissions, etc etc etc. I can successfully pair and connect but when I try to browse files I get one of 2 errors...
The last operation failed: an unknown error (ffffaa8c) has
or
The last operation failed bad request
Sometimes it will stay connected after the error, other times it will show a connection for about 6 sec then the connection will drop
I now cannot find any combination of things which will allow me to reconnect.
I am not trying to sync, only do file transfers for audio and photos
Any Ideas? Thanks

An Update... I was able to reconnect and transfer files. This was the sequence that worked. I wish someone could tell me why I have to do all this
Thanks
-In Bluetooth Prefs-Delete the device (my phone)
-Close Bluetooth Prefs
-Close Bluetooth file transfer
-Turn off Bluetooth
-Delete the Bluetooth plist File and Bluetooth File Transfer plist file (from My Library)
-Turn off phone
-Pull Phone Battery for 1 min
-Turn Phone Back on, wait until fully booted
-Turn Bluetooth back on
-Add the phone as a new device (from Any Device)
-When Device Add complete, Browse Device
-Select the phone and the folders show up

Similar Messages

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

My macbook pro makes that ejecting noise when i open it but not every time usually when i ve been away for awhile then take it out of sleep it makes the noise is this normal?

Hi ive had my macbook pro for a week or so and when i open after its been in sleep mode for quite a while it will usually make that ejecting noise. It doesnt make the ejecting noise evreytime i open it just sometimes. Is this normal HELP

Yes, it's normal.
Apple released a firmware update a couple of years ago that was supposed to stop the drive from making that noise in certain models that were available then, but even the update didn't work all the time. The noise is completely harmless and not indicative of any problem. Just ignore it.

I HAVE TIS NOISE IN MY IMAC AND IT DOES NOT SOUND LIKE THE FAN BUT A SWOOSHING FRYING SOUND THAT LASTS FOR ABOUT 3 SECONDS BUT NOT EVERY TIME I USE THE IMAC. LIKE THIS TIME, I'M ON IT FOR 45 MIN. & IT DID NOT HAPPEN. ?? WHAT IS IT ?

I have had this imac for one year and 2 mos. recently I hear a swooshing noise like speakers are frying when I power up and again intermittantly which lasts about only a few second and quiets down by itself. I have mt portable DVD drive unplugged, I turn down the volumn on the imac but it makes no difference.
I don't have applecare so I guess I should take it to the local apple store in Santa Monica ffor them to check it out. But it could be that it wont do it when you expect it to happen ???
Is anyone familiar with this sound ?

Could it be the hard drive making this noise?
Or could it be the fans?

Please Help!! "A File I/O Error Has Occurred" every time I try to save...

I'm working on a postcard design for print purposes with several embedded images and text elements. I've saved successfully several times early on, but suddenly, every time I attempt to save, I get the message "A File I/O Error Has Occurred". I need to get this to the printer, but can't make important changes now. HELP!
Thanks,
paul

Crazy! Wasn't saving to a server, but to a 2-gig jump drive. When I saved it to my mac's hard drive, no problem. Is there a short answer to why that happens? I didn't appear to be out of space on the external drive...
Thanks Scott!
paul

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

I just bought an iMac now running OSX 10.8.4. I have a G5 running OXS 10.5.8 - External HD connected to the G5 been using Time Machine to back up. Need to get my files, photos etc. but not applications etc. onto the iMac. How do I do it?

I just bought an iMac now running OSX 10.8.4. I have a G5 running OXS 10.5.8 - External HD connected to the G5 been using Time Machine to back up. Need to get my files, photos etc. but not applications etc. onto the iMac. How do I do it?

David JHS21 wrote:
Can I just plug the external hard drive into the iMac and copy the "Documents" and "Pictures" from the hard drive to the iMac?
Not those whole folders, but their contents, maybe.
If the user account now on the Mac has read rights to the user account(s) on the backups, yes. If not, you may have to do some finagling.
Try the Browse Other Backup Disks option, per Time Machine - Frequently Asked Question #17. If you find an account that can open those folders, restore what you want to an alternate location (#16 in the FAQ).
If not try creating one or more accounts temporarily.

I can not recover my iPhone 5 using iTunes , error (-1) appears every time. Also can not quit recovery mode. Please advise.

Could not recover my iPhone 5 using iTunes. Error(-1) appears every time when trying to recover. Also failed to quit recover mode.
please advise.
thanks.

First one listed in this article.
http://support.apple.com/kb/TS3694
May need to go into an Apple Store to have them check it out.
Or you can try DFU mode.
http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode

I keep getting "Unknown error has occurred" every time I try to login, but Itunes is working fine.

I keep getting "Unknown error has occurred" every time I try to login, but Itunes is working fine. I have now called support twice with no help.

Ok.. try restarting your Mac.
If that doesn't help, temporarily disable anti virus software.
Apps such as Little Snitch, Net Nanny, and Hands Off can prevent access to the App Store as well as third party download managers.
Try installing the Mac OS X 10.6.8 Update Combo
That will reinstall the App Store for you which may help. It's ok to do this even though you already have v10.6.8 installled.

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

HT203200 I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help?

I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help? I have been charged for this song but have not been able to download.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne Marie

Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

I would like to detect all the keyboard key is okay, but not every key can be detected by using LabVIEW example, keyboard keycode

I would like to detect all the keyboard key is okay, but not every key can be detected by LabVIEW example ( we can use 『basic input demo.vi』to detect normal key』.
I want to detect some 『hot key』 for example some keys exist in the upper part like 『search key』、『e-mail key』、『volumn control key』...etc. They are very often to be watched in some new keyboards, but we still don't know how to detect if their functions are okay.
Can we detect signals of these 『hot key』 in LabVIEW? We can apply these hot key's functions in XP, so we should detect their signal, I think, but I can't do it.
I serach some information about this question, and somebody said we can detect hot key's signal by grabing 『keybode』 these hot key feedback. But I don't know how to do these. I can't use VC. So anyone can give me a LabVIEW VI to grab keycode? Or any other solution we can detect all the key on the keyboard, including hot keys?
Thanks!
Regards,

Maybe that is the limitation of Acquire Input Data.vi.The vi can't identify the Unformal key.
You can try to use Event structure and set to listen "key down" event.
There are two terminals VKey, ScanCode will sent out the information when you press key.
There are two pictures in attached file, 2.jpg will show you the detail.
Good luck.
Attachments:
SpecialKey.zip ‏17 KB

Took backup of data files and controlfile but not archive file db is 11g xe

took backup of data files and controlfile but not redo file db is 11g xe r2..was trying complete shut backup,..missed redo..
anyway to restore the db back..
I had failed to backup redo log file..
db was shut...properly
any info highly appreciated.
cheers
Edited by: zycoz100 on Feb 27, 2013 4:42 AM

A controlfile create is a fairly trivial task, for either a cold backup or hot backup scenario. Well, its an easy task after you've done the process a few times.
If you have a healthy oracle instance running any place else, preferably at 11gR2, or even a 10g instance can work as an example, get a system connection and do an `alter database backup controlfile to trace;` and the instance will create a new trace file with all SQL commands needed to rebuild the controlfile in the instance trace directory.
Have a look at the trace file, a `show parameter diag` reveals the diagnostic_dest parameter, look for the "trace" directory under that folder, for the latest *trc file. In 10g its `show parameter dump` and the trace file goes straight to the user_dump_dest directory, no digging required.

I want to drag files to mails but not in body of mail , more over the available type of attachments is only photo or video so how I can attach another type

I want while replying incoming mails to drag files to mails but not in body of mail , more over the available type of attachments is only photo or video so how I can attach another type

There is no dragging of anything in iOS.
Attach as many files or emails as you'd like until it reaches the max capacity of attachements for the email provider.

V557 File Tansfer Errors... but not every time

Similar Messages

Maybe you are looking for