V570 can not see wireless n connection

Hello, I just bought a V570 5 days ago and noticed that the wireless adapter does not find my 802.11n signal but only the 802.11g signal.  While the 2.4 GHz connection is ok, I expected to be able to connect to the faster network.  I've tried to set up the connection manually it still does not show in the available list of connections.  I've tried putting my new laptop within 2 feet of the router - no luck.
This is not a problem with my router - my work laptop (2 year old Lenovo ThinkPad) connects to my  "n" network without a problem, as does my cell phone.  I've checked the adapter settings and have the defaults set - 802.11n Channel Width for Band 2.4  set to 20 MHz and and 802.11n Mode enabled. 
What I find interesting is that when I look at the adapter settings on my work laptop, it shows a setting that my new one does NOT have - 802.11n Channel Width for Band 5.2.  Why do I not see this setting on my new laptop.  Is this a problem?  While I like the laptop, this is bugging me enough to return it if I don't find a solution soon.
Thanks for any help.
Solved!
Go to Solution.

Yeah, I know it's a bummer.
I was "burned" by this issue, when I bought my Y470. I just "assumed" that a brand new laptop, would include a wireless card that supported both channels. What I found out, after I received my new system, was that almost ALL laptops coming from Lenovo, only have B/G/N 2.4 Ghz cards. If you want a card with 5Ghz "A" support, you must upgrade the card in your original configuration order. The real kicker is, if you use the Lenovo outlet web pages to buy your system, you can not upgrade most of Idea Pads wireless cards. Those type of upgrades, seem to be only "offered" on Think Pad systems.
However, you can still buy, and install, and upgraded wireless card. I'm just not sure where you can buy it, and still be under warranty. See this thread:
http://forum.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Upgrading-wireless-card-in-Y470/m-p/476833#M39...
You would think that Lenovo would have a "parts" outlet web site, that I could go to and order an upgraded wireless card. But it's like pulling teeth, to get any kind of "after purchase" upgrade information out of them. I guess they're too busy selling their systems, instead of making sure they get "brand loyalty" such as IBM once did.
Still, I'm very happy with my Y470. And as I've said, I get a 144 Mbs connection using the OEM wireless card. I had to fiddle with my connection settings on the card, and also on my E3200 router, to achieve the 144, but I've gotten good range on the 802.11N, 2.4 Ghz connection. After all, isn't that what it's all about, anyway?
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Similar Messages

  • Can not see wireless TM in disk utility or desktop.

    Am I running a TM Airport (router) it runs great, I love everything about it and the backups have no issues.
    But I wanted to partition my 500mb drive on my TM yet for some reason I can not see the drive either on my desktop or in disk utility. Is there some setting I need to change somewhere else to be able to view this wireless drive and configure it? I looked via Airport Utility and the only option there is to archive or erase it, at least that can see it.
    When the backup starts I do see a mounted drive show up.
    Any ideas?

    It does not show up because when I am not backing up, it gets disconnected...

  • No laughing...  I have a Canon ZR 300 camcorder.  I can not see it when connected via firewire in system profile and iMovie doesn't see it either.  Any suggestions?

    I have an old Canon ZR 300 camcorder that I'm trying to connect to my 17" MBP via 9 pin firewire (its a 4 pin to 9 pin cable as the MBP doesn't have a 4 pin firewire - figured it was backwards compatible).  Anyhow, iMovie 09 doesn't see the camcorder.  I checked under System Profile and then under Firewire and it doesn't see it either.  In fact I get some red letters about not seeing firewire devices.  I'm running Lion.  Any help would be greatly appreciated!!
    Greg

    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks
    No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
    Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

  • Can not see wireless access point

    I've wired both my laptop (windows7) and my wireless access point (wap54g) to my functional Neatgear switch. When I run the Linksys setup cd (from my laptop) I get the following message ...Can not locate a wap on this network. What am I doing wrong? Everything is powered up and all 3 lights on the wap are on.
    Please help...

    Have you tired to configure the WAP54G manually? If not you may try to connect your laptop directly to the access point's ethernet port and please make sure that the laptop has the same network IP as of the access point (192.168.1.***) then try to access the WAP54G set-up page via browser for you to configure it.

  • Can not enable Wireless network Connection

    Hello
    I am trying to set up my wireless connection but when I go in to my control panel/network connections and right click and enable wireless connection, it just goes back to enable. Do you know what I can do to enable it.
    Many Thanks

    Hi Paulm,
    can you please tell us which notebook and OS you own because some notebooks only are Wifi prepared with antenna and no Mini PCI Wifi card.
    Also you can check in the Device Manager if your Wifi card is detected in a right way! If yes there is also a option to enable or disable the card.
    Please don`t forget that FN+F8 key combination allows also enable/disable option.
    Tom

  • I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
    or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung

  • How can I transfer photo from my iPhone 4S to my pc . Each time I connected to my pc I can not see those pictures let alone burn them into cd

    How can I transfer photo from my iPhone 4S to my pc? . Each time I connected to my pc I can not see those pictures let alone burn them into cd

    importing pics http://support.apple.com/kb/HT4083

  • I can not see the PC I'm connected to over VPN in the MY Network tab.

    Hi, 
    I have set up my incoming connection for my VPN
    on a Windows 8.1 PC.  I can then remotely log in with my Windows 7 laptop. The laptop establishes a connection and says that I have "ipv4 internet access."
    The problem I'm having is that I can’t find the PC in my network. What am I missing? Is Windows 7 not compatible with Windows 8.1 over
    a VPN? I have turned off my Norton's Firewall for a short period of time but this did not change anything. I have altered the IP range allocation for the incoming connection and this has helped to establish a stable connection.
    Any ideas on why I can not see the PC I'm connected to, in the (MY
    Network) tab, would be much appreciated. Thanks

    Hi Steve,
    The main issue is the Windows 8.1 machine is not listed in the Windows 7 machine via VPN ,right ?
    Please check the following settings in the network and sharing center:
    1.Check these settings in the Advanced sharing settings
    “Turn on network discovery” and “turn on file and print sharing”
    2.Ping the destination machine both with the IP address and the UNC to have a check .
    Best regards

  • I downloaded A software to your computer. And I connected with my iPhone. Main page does not work. I can not see it. Iitnos Store does not cost me why?

    I downloaded A software to your computer. And I connected with my iPhone. Main pagedoes not work. I can not see it. Iitnos Store does not cost me why?

    Your posting makes no sense in the English language.  Please post in your native language.

  • I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.

    I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.
    Thanks
    Celeste

    I rented a movie (The Hobbit)...but  it stops loading.
    The movie costs CHF 7.50.
    A phone call to the support team costs CHF 46.-- !!!!!
    What do you think I will do?
    Pisella Verde

  • Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

  • HT200197 I have set up my apple ID, my apple TV is connected to my Mac, internet is OK, TV syncing all movies, phones,- ok, but I can not see iTunes store on my apple TV.

    I have set up my apple ID, my apple TV is connected to my Mac, internet is OK, TV syncing all movies, phones,… ok, but I can not see iTunes store on my apple TV. Any suggestions? Thanks

    Thanks, I read several other threads and all it took was to turn off the router and turn it back on again, 'simples'.
    Thanks
    Chris

  • TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

    i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Mac's can not see or connect to network resources

    Our company network is a windows network. We have a couple of remote users with Mac's. The Mac's connect to the network over a VPN. They can connect to the network through the VPN but can not see or connect to any network resources. What settings am I missing?

    My problem is that once the VPN is established and I am on the network, none of the shares or resources are visible or able to be connected to.
    VPN gets you connected to the network as if you were physically present in the office, but nothing more.   Once you have successfully connected via VPN, you have to perform a seperate step to actually login to the server. 
    Also, some of the "it just works" aspects, like seeing all the things you can login to, before actually logging in to them, is a feature of Bonjour, which doesn't pass over VPN.  You'll probably have to use the Finder Menu GO -> Connect to Server, and then type the server's IP address in manually.

  • I can not see images on a HDMI TV connected my laptop Displayport

    Dear all,
    I need to connect the laptop to a HDMI TV and therefore I purchased a HP Display port to HDMI cable adapter P/N: 612873. It is not working.
    I phoned HP service, they recommend to me to download the HP Softpaq download manager and update my laptop.
    After doing this, still I can not see images on the TV.
    I know the TV is working, because other laptops like Asus, Toshiba are connected to the TV and works fine.
    Does anybody know what should I do?
    Thanks in advance.
    Ernest-bcn

    @Ernest-bcn 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

Maybe you are looking for

  • Materialized view logs pretty huge!

    Hi, I have a table MLOG$_XXXXX, which i guess is a materialized view log table. It is huge in size (80GB) and is growing at a very alarming rate. Could someone please help me to reduce the size of this table? How do I find out which materialized view

  • OS hang on permissions repair--help!

    Hi all- My Mac Pro started locking up the other day. The cursor still moved, but everything else frozen. It would happen consistently within about 5 minutes of finishing the booting process. There'd be some disk activity for about five minutes and th

  • Uploading data into 0CRM_CO1 cube

    Hi all, i'm trying to upload data into the above said CRM cube... its a content cube .. but when i'm trying to see what is the datasource in the content i dont see any datasource. The question is ... do i need to create a generic datasource or there

  • Discoverer saved queries.

    This may be a repeat, I am not sure it worked the first time I posted. Hello All, I am new to Oracle and researching Discoverer. So far I understand it is possible to build and save queries that can be run in a later session. My question is: After ha

  • BP Internal Reconciliation through SDK

    Hello All: IS there any object / service that open for Business Partner Internal Reconciliation? I couldn't find it. We are looking for 8.8.1 PL 08. Any help will be greatly appreciated! Thank You