V570 Nvidia display driver problem

Hi,
I just bought a laptop Lenovo V570 with the serial nr.: 59-3157502y. When i try to instal the nvidia display driver i get the message: "This graphics driver could not find compatible graphics hardware".
Please give a solution how to fix this problem. I had high expectations for this product....
Tks

In the drop down list you're picking Geforce 500 series, you should be picking Geforce 500M series (notebook)

Similar Messages

Satellite 2430-402, Display Driver Problem

I have a Satellite 2450-201. Very often when the system comes back from Hibernate the system will not re-boot, it gets stuck after the opening logo. I have to shut it off and then then got to safe mode, and then restart. I get a message that the system has recovered from a device failure and it identifies the Nvidia Display Driver as the culprit. I have re-loaded the latest Driver from Toshiba, but if I try ANY update from Microsoft the Display goes crazy, and I have to go throught the re-boot and safe mode thing again. Any ideas on what the problem may be?

Good evening ! I had this problem with my Satellite 2430-402. Ive updated the Bios and all was fine.
Did you checked your Bios Version at first ?

With hardware acceleration enabled, and with plenty of tabs open, using the Windows 7 taskbar preview option will almost always crashed the nVidia display driver.

Latest Firefox 4 beta 6.
nVidia GT240 1GB DDR3 with driver version 258.96.
Windows 7 Ultimate.
If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
This doesn't happen if hardware acceleration is disabled.

It is beta software and the older 4.0 b6 version may not work with all display drivers.
You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/

Aperture crashes when doing enhancements crashed at thread 35 which i think is a display driver problem any ideas folks

Aperture keeps crashing every time I try and do some auto enhancements crash log comes up with crashed at thread 35 or 36 which seems to point to a display driver problem imac 2.16 intel core 2 duo 3gb ram os x 10.6.7.
This is making aperture unusable I might go back to lightroom never had these problems with it.
Graham

Hi yes I'm running 3.1.2 I have tried 32 bit mode and it does just the same.
Graham

I'm going nuts with display driver problems!!!!

Hi everyone,
I joined the forum some time ago but I can't get back in so I logged in with a new ID.(Pain)
I have a problem that I hope someone can help with When I place any of my work or a photo into CS5-Ext. I can't do any work on it? No matter what tool other than the paint brush I use, as soon as I click on the picture / work it disappears and will only re-appear if I click on it again. I've tried all sorts and it's driving me nuts, Can anyone help?---PLEASE---
Thanks.

That sounds like a display driver problem.
What OS are you running?
If Windows, you can often visit the web site of the maker of your video card and download/install an updated driver.
If OSX, you need to look to Apple and their OS updates to get updated display drivers.
-Noel

Qosmio X70-A-120 - Corrupt NVIDIA display driver for Win 8.1

Hi,
I have problem with last display driver nvidia (windows 8.1 update) ...
After download .zip file is corrupt...
Need help.
Thanks in advance.

Hi,
model is Qosmio X70-A-120
display driver nvidia 9.18.13.2660 windows 8.1 - Update.... posted 18.10.13
http://www.toshiba.fr/innovation/jsp/supportMyProduct.do?service=FR

Display driver problem - Premiere Elements will not start

Premiere Elements 10 will not run on my computer unless I downgrade to an old display driver. I would do this but it causes other problems.
I am using the most recent driver from NVidia (but a pretty old display card). I get this message: "We have detected an incompatible display driver... driver details: NVidia Geforce GTS 250/pCIe/SSE2 3.0.0"
On Windows 7
Can anybody help with this?

Have you manually gone to the nVidia web site and downloaded the latest driver?
http://www.nvidia.com/Download/index.aspx?lang=en-us
This fixes about 95% of these types of issues.
Also, you definitely do have a BadDriver.txt file on your computer. And you may need to delete it to clear this error.

Re: Satellite A500-1EN - Nvidia display driver stopped responding

I often have problems with my notebook about the nvida controller. Sometimes it appears the next message on the task bar down right: Display driver NVIDIA Windows Kernel Mode Driver, Version187.98 stopped responding and has successfully recovered
I installed the new drivers from nvida web, (Version187.98 to197.16), but the problem doesn't go.
Anyone could help me, please?
Notebook: Toshiba Satellite A500-1EN
Operating System: Windows 7 64bit
CPU: i5 CPU M430 2.27GHz,
GPU: nvidia GeForce GT 330M,
DirectX Version:11.0
RAM: 4GV
Screen resolution: 12766x788
HD: 500GB, free 300GB

> {quote:title=xactxx wrote:}{quote}
> I have the same problem, or rather had the same problem, because I think it's fixed now. :)
>
> Thanks to whoever posted to remove the default theme.
>
> Right-click on an empty space in your Desktop, and choose Personalize. Then choose the 'Windows 7 Basic' theme instead of one of the pre-installed themes from Toshiba.
>
> That did it for me. No more random NVIDIA crashes! (so far).
>
> I think that's why most Toshiba laptops have this problem, because their Windows 7 comes pre-installed with one of their themes, and it somehow conflicts with the NVIDIA card. I don't know why this happens, and why changing the theme fixes it.
What a load of rubbish changing a theme just does that changes your theme I did this the day I brought mine still the drivers crash and re-start. huh.

Nvidia Display Driver Error

New T61-CTO system, Vista 32 with Nvidia Quadro NVS140M that is not even a week old.
The system is very unstable, crashing almost daily with a display driver error. About half the time it is able to recover and I get the following message, "Display driver nvlddmkm stopped responding but has recovered.....". The other half the computer crashes to blue screen or just freezes with a corrupted display and I am forced to hard-power-off to restart. About 75% of the time the error occurs at startup, but sometimes just randomly while working.
There is lots of info about this driver problem online but mostly for different display adaptors on desktop systems. For the record I have the following display driver installed: 7.15.11.5685 and it is dated 12/10/07. Nvidia does not provide support for this display adaptor and refers you to the system manufacturer. Strangely, the driver on the Lenovo site is 7.15.11.0145 and dated 7/12/07, not sure why my system shipped with a driver that is not listed on the support site.
Any information on resloving this issue would be greatly appreciated.
Thanks

Hi WillThePill, and welcome to the Lenovo User Community!
I come up with a newer driver version 7.15.11.7693 2009/01/13 on the Lenovo support site:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67890
Try that and tell us if it helps!
I don't work for Lenovo. I'm a crazy volunteer!

Lenovo G 560 display driver problem

The problem that I have: in 5 or 6 days my display goes black and after 2-3 seconds everything is OK again. When that happens I get a message from the system:" DISPLAY DRIVER STOPPED RESPONDING AND HAS RECOVERED"
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.38 stopped responding and has successfully recovered."
I tried with downloading and installing new,fresh drivers from Lenovo and the problem is still there!! Does anybody know what is the problem?
Solved!
Go to Solution.

un-install drivers first, restart your computer and re-install graphic card drivers from here.
by the way, have you installed any application or made any changes recently?

T410: display driver problem // display does not turn on again after turned of by e.g. (fn+F3)

Hello,
I have a problem with my T410 (model: 25223FG)with Nvidia NVS 3100M (driver version 8.17.12.5738 (27.06.2010) ) .
The Fn+F3 Key-Command is configured to turn of the display.
In almost 50% of the cases where I use the Key-Command (fn+F3), the display turns off but does not turn on again on mouse movement or key-press or touch-pad action. The faulty behaviour occures always when the T410 is connected to the AC adapter. And the chance of the display not turning on again seems to become higher with increase of the duration between Key-Command and mouse movement.
In these test cases my energy manager configuration was set to not turn of anything, when connected to AC.
If I configure it to turn of the display after some time I am experiencing the same problem.
So my question is:
Does anyone have a suggestion where to start? (display driver, bios,...)
Regards
Jonny

Hello,
I have a problem with my T410 (model: 25223FG)with Nvidia NVS 3100M (driver version 8.17.12.5738 (27.06.2010) ) .
The Fn+F3 Key-Command is configured to turn of the display.
In almost 50% of the cases where I use the Key-Command (fn+F3), the display turns off but does not turn on again on mouse movement or key-press or touch-pad action. The faulty behaviour occures always when the T410 is connected to the AC adapter. And the chance of the display not turning on again seems to become higher with increase of the duration between Key-Command and mouse movement.
In these test cases my energy manager configuration was set to not turn of anything, when connected to AC.
If I configure it to turn of the display after some time I am experiencing the same problem.
So my question is:
Does anyone have a suggestion where to start? (display driver, bios,...)
Regards
Jonny

Lenovo B570e Intel HD Graphics - nVidia Display Driver

Hi Guys
Iv got a small problem, and I'm struggling to get my head around it! Im installing Windows 7 pro 64Bit from scratch. I normally do chipset drivers first, then i move on to the others and finnish of by doing a windows update.
My problem is when i come to install the nVidia Optimus Display Driver the install appears to fail, windows message pops up towards the end and says something like "hasn't installed propley would you like to try reinstall the recommended way"
Am i right in thinking the nVidia Optimus Display Driver should install the intel drivers too?
My Next step was to try install the Intel HD Graphics (Integrated) from the lenovo site, after installing the machine wont boot back into windows. Had to remove the driver package with safemode.
Iv tried all kinds of combinations and driver packages with the same result.
Anyone else come across this, i welcome as much help as possible.
Many Thanks
Giles.

Hi Giles,
Thanks for posting in the Lenovo Community,
Can you please Pmed me with the machine model type to provide you with the correct drivers for the video for your machine and please share with us the windows version installed on the system.
And I’d like to advice you when installing the drivers for the video can you please install Intel and then please install the the Nvidia optimus.
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

NVIDIA Display Driver Stopped Responding

I have a HP EliteBook 8540w WIN 7 x64 with a Quadro FX 880M card
Regularly my graphics card stops responding with the error message ,” Display driver stopped responding and has recovered. Display driver NVIDIA Windows Kernel Mode Driver, Version 261.28 stopped responding and has successfully recovered”
This usually happens when I am scrolling ( usually with the wheel on my mouse ) in Adobe Acrobat X ( 10.0.1 ) or Mozilla Firefox 4 ( although I suspect the Flash plug-in there ) where Firefox will then crash ( Acrobat doesn't usually crash )
I have spent far too much time searching forums and updating drivers running Windows / HP updates etc and would like some real technical input. I do suspect Adobe ( I have contacted NVIDIA and HP also ) I would hope someone have access to what is actually going on here.
This is example extra info from Windows log
Source
Windows
Summary
Video hardware error
Date
2/14/2011 3:31 PM
Status
Solution available
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:    LiveKernelEvent
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Extra information about the problem
BCCode:    117
BCP1:    FFFFFA8008D8B170
BCP2:    FFFFF8800552C4A8
BCP3:    0000000000000000
BCP4:    0000000000000000
OS Version:    6_1_7600
Service Pack:    0_0
Product:    256_1
Bucket ID:    X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys
Server information:    e748fac4-7d1e-4372-b6f3-12d2da9d6318

The problem occurs generally when I have 2 or more pdf's opened (so I have 2 or more windows open) and start scrolling in one of them.
I also noticed that the error seems to occur more often when:
- I scroll fast
- have 'big' files open ( +2MB)
Hardware details: (source, system information windows)
General info:
OS Name     Microsoft Windows 7 Home Premium
Version     6.1.7601 Service Pack 1 Build 7601
System Manufacturer     Hewlett-Packard
System Model     HP EliteBook 8540w
System Type     x64-based PC
Processor     Intel(R) Core(TM) i7 CPU       Q 720 @ 1.60GHz, 1600 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date     Hewlett-Packard 68CVD Ver. F.0C, 15-10-2010
SMBIOS Version     2.6
About display:
Name     NVIDIA Quadro FX 880M
PNP Device ID     PCI\VEN_10DE&DEV_0A3C&SUBSYS_1521103C&REV_A2\4&C64103&0&0018
Adapter Type     Quadro FX 880M, NVIDIA compatible
Adapter Description     NVIDIA Quadro FX 880M
Adapter RAM     1,00 GB (1.073.741.824 bytes)
Installed Drivers     nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version     8.17.12.6776
INF File     oem53.inf (Section014 section)
Driver     c:\windows\system32\drivers\nvlddmkm.sys (8.17.12.6776, 12,36 MB (12.963.176 bytes), 5-4-2011 9:03)
A friend of mine having the same model and setup also has the problem. I'm student Aerospace engineering at Delft University of Technology and this model is currently sold in the DUT's high end laptop. A lot of people have them and so I'm a little bit surprised that no-one has heard of the problem yet.
Greetings,
Rubseveni

1.3 slowness because of "wrong" nvidia display driver

As 1.3 goes much slower as the 1.2 did before, I played around a bit with the configuration of my pc.
What I found out so far is, that depending on the installed display driver, lr changes it´s speed behavior drastically.
With the current nvidia forceware driver (v163.75), the sliders in lr are unusable slow. But when I re-install an older version (v93.71), lr becomes fast as the version 1.2 was before.
And it is not the nvidia desktop thing. This is disabled anyway. No, it´s the core-driver itself.
But it´s only lr who makes this kind of problems. All my other apps on my machine are just fine with the newer driver.
Anyway, I hope this info may helps others with the same performance problems.

Ok, I installed the v163.75 drivers, and now I get "real time" slider performance. Way faster than before. I would not be able to count the number of refreshes on the SAME photo i did prior to the driver upgrade. I slid the exposure, recovery, fill light, blacks, brightness, contrast clarity, vibrance and saturation sliders. Back and forth as fast as I could and had realtime updates in the photo viewed "to Fit", and "1:1". SO it is definately not JUST a driver issue.
So, maybe not an NVidia driver issue
Steve

Display driver problem!

Im trying to open a .psd file and it wont let to open it..It says photoshop encoutnered a problem with the display driver and has disabled the GPU enhancements!
GPU enchancemnts can be enabled in the performance panel of prefences..
If the image opens some how, I get a pop up saying there is a problem photoshop cs4 needsto shut down ..sigh!
what should I do?

Is your video card on the list of cards tested by Adobe?
http://www.adobe.com/go/kb405711
It may not fulfil the system requirements for Photshop CS4.
This is from Adobe:
Photoshop CS4 leverages the graphics display card's GPU*, instead of the computer's main processor (the CPU) to speed its screen redraw. For Photoshop to access the GPU, your display card must contain a GPU that supports OpenGL and has enough RAM to support Photoshop functions--at least 128 MB of RAM--and a display driver that supports OpenGL 2.0 and Shader Model 3.0.
* GPU - Graphics Processing Unit. The computer chip on your graphics display card, that is optimized to display computer graphics to the screen.

V570 Nvidia display driver problem

Similar Messages

Maybe you are looking for