V570 Stuck at boot screen (Won't load windows 7).

I have a 3 month old V570 It was working great in the morning when I came home fore lunch and hit the power button it went to a screen that said launch repair or start windows normally. I tried both neither worked. I tried F8 and safe mode but it just restarts and returns to the first screen. I tried every option on the F8 screen and nothing works. I have no idea where to go from here. I bought my laptop from bestbuy but I am a service member stationed in germany so my options seem to be limited. I can mail it home to my family and lose my only way of communicating with them for who knows how long or keep trying to do it myself(this seems like a bad idea due to my very limited knowledge of computers).

hi tag82
it could be just windows issue. can you try to start-up your computer by pressing one key recover button to perform clean windows installation?
warning: clean windows installation will delete all the files located on volume c.

Similar Messages

  • My iPod 2g won't start up it is stuck with boot screen and a loading spinner

    My iPod 2g won't boot up it is stuck with a loading spinner and the apple logo, when I try to restore it iTunes refuses to restore.

    You said:
    when I try to restore it iTunes refuses to restore.
    Why can't your restore? Error message?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Lion boot screen won't load?

    I recently upgraded to Lion OS X on my iMac 27 and it seemed ok for a day or 2 then last night I shut it down and this morning it wouldn't boot. It goes as far as the mac logo on a white screen and a spinning circle and then goes off to a white screen. It has been rebooted several times and has been able to log back in with no problems. I tried to do a Recovery via the Option button when booting but its all locked up. As in can't click or select anything.

    the same thing happened to me after the last Snow Leopard update, right before Lion came out... and i couldn't get time machine to do a restore... glad you got lucky with that.  i ended up doing a complete reinstall of the OS, and then restoring my data.  had to reinstall all my software - no big deal - but at least all my documents, photos and music was able to be restored.
    i thought it was hard drive failure at first.... almost ended up sending in for replacement.
    anyway - good luck - hope it doesn't happen again.

  • Iphone 2g stuck at boot screen with a loading in background

    I have tried dfu mode and recovery mode windows does says its a unknown device u have tried tgis on 2 different computers I did the reset all setting in the iphone menu help please..

    If the system BIOS gets currupted then a similar blink code pattern can occur.  Your system may support BIOS recovery via the following instructions in the link below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&cc=us&dlc=en&lc=en
    ( I am an HP Employee )

  • Photoshop Elements 10 Edit Screen won't load

    Photoshop Elements 10  Edit Screen won't load.  It was working fine, then I responded to an Adobe Update. It stopped working. I re-installed Photoshop Elements 10 for MAC from the purchased Disc. The organizer works but not the editor. The organizer is not able to call the Editor either. I have uninstalled and reinstalled twice. I cannot get the editor to load it's editing screen or any images.
    I'm really stuck.

    Go to your username>library>preferences and delete:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 10 settings
    Adobe Photoshop Elements 10 paths
    repair permissions and try again.
    Note: In lion, that library is hidden. In the finder, click the Go menu and then hold down the Option key to make it appear.

  • HT4623 My phone is stuck on booting screen!

    When i remotely updated my phone , It restarted it and it was stuck on the booting screen. I pluged it into my computer , And it gave me the option to restore , So I just tried to restart it again and it was stuck in booting screen so i decided better to restore my phone than have a brick , So I plugged it back in to my computer and my computer dosent recognize my phone at all. What can I do?

    I was able to fix it by putting my phone in DFU mode by holding the sleep button for 4 seconds , and without realeasing the sleep button holding them both for 12 seconds and then without releasing the home button letting go of the sleep button and holding for 10 seconds or until my computer saw it (My phone was plugged in the entire time)

  • I am trying to use Adobe Color and the screen won't load

    I am trying to use Adobe Color and the screen won't load. All I get is the 4 spinning squares in the center of the screen. I Am using a Mac. Any help would be much appreciated.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Store and sign out and sign back in.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.

  • CC app home screen won't load

    When I start the CC app on my PC (Windows 7, 64 bit), the home screen won't load.  The activity indicator just sits there and spins.  It worked before, but not for the last few days.  The other screens work just fine.  Any ideas?
    Thanks,
    Mitch
    Mountain Storm Fine Arts

    Hi Mitch,
    Welcome to the Community!
    If internet is fine then this might be becase of Creative cloud files, please try the steps metioned in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html and see if it works.
    Thanks!
    Ankit

  • Satellite M55-s3293 won't load windows xp

    my Satellite M55-s3293 won't load windows xp.  I press the power button, the fan runs for a few seconds, than I see the toshiba screen and it freezes.  I get a message to press f2 to enter setup, f12 for boot device selection menu.  I've gone into both menu's, to no avail.  
    If I wait for a minute or so, I get a message saying that windows did not start sucessfully .  I have options to start in safe mod, last known good config, or normally.  I've tried each of those selections, but get the same frozen toshiba screen with message to select f2 or f12.  my cd drive will not open to allow me to try a recovery disk. 
    Do you have any suggestions for me please.
    Thanks
    Just tried f8 during startup and got tech info:
    stop: 0x00000024 (0x00190203, 0x86efa828, 0xc0000102, 0x00000000)

    Hello Jane and welcome in Toshiba forum
    After reading your posting I must say that best and easiest solution for you is to reinstall operating system using original Toshiba recovery DVD. This DVD contains operating system, all necessary drivers, Toshiba specific tools and utilities. After recovery image installation you will have out-of-box state and clean preinstalled OS.
    Yes, this should fix your problem. Please note: when you do this all saved data will be deleted.
    Do you have some important data saved on your notebook?
    If not use this disc reinstall Vista and everything should be ok again.

  • Satellite L300 laptop won't load Windows

    I have a Satellite L300 model number PSLB0A-00L022 running windows Vista.
    The problem is that it won't load Windows. It starts ok and I can access the boot manager and the setup utility and that's it. It just stops loading.
    After researching the problem I ran a drive fitness test and the result was error code 0x70. After looking up the code Im under the impression that I need to erase the disk. I have no problem with that.
    My question is - if I run the windows recovery wizard will it fix my problem? Will I have to re install vista at all? Any advice is appreciated!!

    Hello Jane and welcome in Toshiba forum
    After reading your posting I must say that best and easiest solution for you is to reinstall operating system using original Toshiba recovery DVD. This DVD contains operating system, all necessary drivers, Toshiba specific tools and utilities. After recovery image installation you will have out-of-box state and clean preinstalled OS.
    Yes, this should fix your problem. Please note: when you do this all saved data will be deleted.
    Do you have some important data saved on your notebook?
    If not use this disc reinstall Vista and everything should be ok again.

  • New HD won't load Windows XP

    I had to install a new HD but it won't load Windows XP, says I need a Bios update.  how do I update the bios update without an operating system?  Lenovo site says to load update via windows.  Do NOT want Vista.  Any suggestions?????

    harix, welcome to the forum,
    you do not state which notebook you have, this might be important. However, it may be that you just need to change your S-ATA settings in BIOS from AHCI to compatible mode.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Re: Satellite L670D won't load windows

    Hi, I have a toshiba L670D that recently had a windows update and since then, when ever I try to turn it on won't load windows, but just comes up with the error "fatal error c0000034 applying update operation 207 0f 102311 (_00000...)"
    Is there anyway I can fix this myself, or is it a case of calling an expert or even going shopping for a new one?

    Many thanks, but I cannot seem to open it in safe mode as it either tries to open in standard mode and fails with the error message or just goes into a self diagnostic mode and then comes up with a message to say that recently downloaded software cannot be loaded and to unplug it or call the system administrator.

  • Windows boots but won't load (Black screen with cursor)

    [Sorry for the long post, but I feel the need to fully explain my situation]
    I have the following problem:
    I turn on my PC, and Windows shows it's normal loading screen, after which it goes into a completely black screen, with just the mouse in the middle. By the cursor size I can tell that it's in a low resolution, probably 800x600 (compared to my usual 1920x1080). I am able to move the mouse around, but with no particular use without something to click on. No other keyboard input seems to work, except for Shift key 5 times, which brings up the Sticky Keys dialog box (with just "Yes" or "No" options, no other link); and Windows key+U which brings up the Ease of Access center. Ctr+Alt+Del does NOT work.
    So far this is what I have tried (in chronological order):
    Boot into Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Booting in low resolution video, Last known good configuration: all yield the same result as booting normally.
    Repair your computer:
    Startup Repair: Found Registry Errors (I realized and fixed this later on)
    System Restore: Did not find any previous restore points (I know for sure that there are, I made a habit of making restore points regularly).
    Windows Memory Diagnostics: Did not find errors.
    Command prompt:
    Ran chkdsk /f /r command, did not report errors.
    Ran sfc /scannow : I don't remember the exact report, but it asked for a restart to finish repairing problems. I restarted, and ran the command again for the same result.
    Forced the scan with: sfc /scannow /offbootdir=c:\ /offwindir=c:\windows , it found and repaired some errors, still could not load windows.
    Ran Dell Startup Diagnostics, found no errors.
    Ran Startup Repair again, found the registry errors again. I found the solution to this in a Microsoft Help forum ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ), and fixed the issue. I rebooted, but the problem persists.
    Startup Repair now finds no errors. I tried System Restore again, it found 2 restore points dated AFTER my problem started. I decided to restore anyways, but neither of them worked.
    I ran Windows Defender Offline:
    Quick Scan: and found 2 threats and removed them.
    Full System Scan: found 4 more threats, removed 2 of them, the other two couldn't be removed because they were within an ISO file.
    I tried Steps 1, 2 and 3 again with no luck.
    With each step I am aware that I'm closer to having to reinstall Windows, so I decided to see if I could still access my HHDD to save my personal files. I made a Linux live CD (with Ubuntu), but I am having trouble mounting the drives, because they are in a RAID0 configuration. "sudo dmraid -s" gives the following error: "ERROR: isw: wrong number of devices in RAID set "isw_dbdffjficc_ARRAY0" [1/2] on /dev/sdb".
    Important Details:
    I changed my graphics card about 4 months ago (an Nvidia GTX 750ti for an ATI Radeon HD 6450), and I was told that I may be running short with the Power Supply. The new card asks for a minimum of 450W and I think my PSU is 460W. This may or may not have something to do with this issue, I have no idea.
    The RAID0 configuration of my 2 500GB Hard Drives brought me a lot of problems from day 1. One of the HDD would randomly fail (I am able to hear a different clicking sound when this happens), and the computer would crash. Upon startup, it would ask for a boot device. The Dell startup utility would then only recognize 1 of the drives, but would finish without errors. After a restart or two, all would be fine and windows would boot normally (aside from the usual error recovery screen) without any sign of corrupted data or anything. Like I said, this has been happening form the day my PC arrived, but restarting a couple of times always fixed it. As of now, both HHDD seem to be working fine, the Dell utility recognizes both of them, and does not find errors in any of them, and I can access any directory from the command prompt.
    Is there anything else I should try before reinstalling Windows?
    Before the install, I would really like to be able to recover my files (I have important documents from college), is there any way to do this?
    Sorry again for the extremely long post (and for any language errors, English is not my native language), and thanks in advance.

    Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
    Use a Windows 7 Reinstallation DVD when installing ensure you select...
    Select Custom: Install Windows only (advanced)
    If you do not select any of the drive options and simply highlight the largest partition and select next:
    Windows will dump all the old installation files in the Windows.old folder

  • Stuck on booting screen (loading progress bar)

    My Mac stuck on the booting screen (the grey page) then shuts down, I've opened the recovery mode by holding the command+R then opened disk utilities -> verifyied my desk -> found errors -> repaired my desk -> Got red message "Disk utility can't repair this disk. Back up as many of your files as possible!" then i decided to create an image to store it on my external hardrive i got this message "Unable to create image input/output error"
    What i have to do ? I need to back up my files and get my MAC running well !

    You have already tried repair, and it did not fix enough to get your Mac working again.
    Now buy two hard drives and enclosures.
    One is a Large Backup drive. USB-2 enclosure will suffice, but the bigger the better. It does not have to be a notebook (2.5-in) form factor.
    The Other is a candidate for a replacement for your internal drive -- but do not move it just yet.
    While it is still in the external enclosure, Install Mac OS X on it and boot from it. Now you can get some work done if needed, and can use the full power of Mac OS X and additional Utilities to attempt to repair your drive and salvage your files. Mac OS X is about 400,000 of those files, so if they cannot be saved, it does not matter.
    Once you have salvaged what you can and are confident that the new Boot drive works, you can swap it inside your MacBook and get portability back.

  • Mac Mini 2011 boot camp freezes on loading windows screen.

    I bought my mac mini 2011 server, have upgraded it to mountan lion and mountain lion server and wanted to install windows on it. I have microsoft windows 7 professional OEM system builder edition on a dvd, a LG portable super multi blue rewriter, a corded mac keyboard with number pad, a HP mouse, and a hdmi monitor. I have not upgraded any features on the mac, it is original.
    I updated all software, well except a printer driver that I don't have the printer of anymore, and ran boot camp. I tried to partition my entire hard drive for it, however that did not work. I then tried to partition half of the first hard drive and that did not work either. I tried unpluging the mouse and keyboard and it still won't work. I bought the copy off of amazon and it appears to be legal. I just always get stuck on the "Windows is loading" screen. The loading bar, a white band across the bottom of the screen, always goes across the whole screen once fast, then makes it's way to the farther left side of the screen and then hangs there indefiniteley.
    Any suggestions? more questions about the situation?

    Mini mini, there are problems with mini and esp. server version.
    What I think others have said: cannot use OS X Server, had to use Mac OS X client
    External LG is not supported. Doesn't come with an internal SuperDrive though does it?
    The system builder is fine.
    Just one story (there are others, I need to collect all the "Mac Mini Tips" together, I can't remember and keep them straight otherwise.
    HDMI audio in Windows 7 64 bit 
    reinstalled the Intel video drivers and audio worked immediately.
    My config:  2011 Mac Mini 2.3, Intel 3000HD video
           .   .       upgrade to 8GB ram
    Samsung 8000 series LED TV connected with HDMI
    Memorex external BluRay writer(USB only power)
    After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
    When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
    Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
    When auto updates are off, the Intel video driver that is correct gets installed last. 
    HDMI audio works with this driver.
    Apple should install the Intel video driver first and it would solve this problem.
    I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
    https://discussions.apple.com/thread/3408749
    - There are other stories where Microsoft Windows will automatically install video drivers (iMac) and cause trouble. Sometimes in an innocuous security patches rolled out monthly Tuesday.

Maybe you are looking for