V5R3 *** 6255 installation and DB group 13 Performance ?
Hi,
We did install these PTFs last week since that time we have serious problem degradation performance as soon as user increase on the system......
Just to verify if someone else as thess kinds of problems......
ECC 5.0
Kernel 155, libdbsl 149, Tp 154, R3trans 145, Callcmd 17,....on iseries 825
Emergency !!!!!!!
Thanks,
Jules
Hello Jules,
Sorry but I do not have a solution for your problem, but the last year we have had similar problems when applying *** packs. Strange thing however is that the performance problems, which were huge, only occurred with two of the four *** packs we installed.
On both occasions IBM and SAP were involved for assistance but never a cause was found for the bad response. The performance problems vanished away in two weeks after the *** pack install.
When thinking of a reason why two installs of a *** pack had such a big impact on the performance, I tried to figure out the order being followed during the install.
In both cases it went wrong when the *** pack was installed on Thursday evening around 20:00 hours or so. Friday did show a bad performance, but Friday is a day with less people in the office. On Saturday a client copy was scheduled, that is when the performance trouble started.
My theory, (which may be stupid after all I am not an SAP expert), is that prior to a *** pack/database group ptf install you are supposed delete all software packages. The client copy requires the recreation of to much SQL packages at once, leaving the system out of breath. Stopping the client copy or stopping SAP at that stage only makes things worse.
After having had these experiences I always plan the *** pack apply in the weekend and without the need of a client copy being scheduled in a week's time. Following this roadmap did not result in any performance problems after a *** pack apply.
Having said that I am curious if the performance on your systems stays bad or that you also see some improvement in time. So an update about the status of your problem would be nice.
Kind regards, Rudi van Helvoirt
Similar Messages
-
Cisco Prime 4.2, Inventory group management and reports group
Hi
I have created some groups under Inventory > Group Management > Device. This works fine.
Then I want to create a monthly report for Reports > Performance > Device > Availability. Here I guessed I would find my groups created under inventory.
But I can se the groups, one group is duplicated, but all groups are empty. Under all devices, I can only see 6 og th devices but it should have been 122. Under the different subnet groups, there's no devices.
Should'nt I've seen the groups created under inventory when I want to make a report? Under the device list for quick report.
Br
GeirHm.... strange I've been looking around under Report, and looked at Inventory and Performance reports.
Inventory > Detailed Device shows all the devices and my groups.
Performance > Device > Availability show just 6 out of my 122 devices.
Under Inventory > Group Managment > Device I have a group called Datasenter.
Under Performance > Device > Availability I can see 2 of these groups, but their both empty.
When i delete this group, one of them dissapeer from Under performance. WHen I create it again, it comes back but empty.
Something must be corrupt.
Geir -
I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?
dcotejr wrote:
I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
You cannot.
By Design the iPhone can Only Sync to One iTunes Library at a time. -
trying to update to latest Itunes. Get almost through the installation and get a message that old version of Itunes cannot be removed, contact local support group. What is up?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Installation and performance wonderful!
Just completed installation and testing of Aperture 3. 20K images, mostly RAW from Canon 40D and 5DM2 (11 to 23 MB RAW files), around 300GB.
Ran Consistency Check and then Rebuild on Aperture 2 libraries before starting move to Aperture 3.
Backed up Aperture 2 Libraries on several hard drives (belt and suspenders).
Installed from Ap 3 disk.
Did software updates re slideshows and new RAW update.
Turned off Faces (can run this later).
Did not reprocess files, just the update. I will reprocess as needed, when I want to use new tools on old files.
Update on both Mac Pro (2006, 2.66GHZ, 7GB ram) and MacBook Pro (2008, 2.5 GHZ, 4 GB ram). No other application slowed down at all during update. Update took about two hours on each machine.
Library and adjustments are very snappy.
Printing went exceedingly well, after re-entering my presets.
Image Browser shows Aperture library.
Not a single problem so far. I've spent almost a week reading the posts here and I've seen all the problems some people have had.
In my view, a very, very impressive new version.I know it really probably will not help but I submitted a bug report.
"17-Feb-2010 12:16 PM Brian Hursey:
Summary:
Major issue with Aperture 3 when converting A2 library's and projects to A3.
Steps to Reproduce:
Senerio 1. Open an existing aperture library. It tells you you will need to convert the library conversion only gets to about 5%.
Senerio 2. Importing and not converting an existing A2 library into a A3 library.
Senerio 3. Reprocessing masters on a imported A2 project.
Expected Results:
Conversion, importing processing needs to keep from locking up the system and making it unusable.
Actual Results:
Uses all systems resources and creates a 43+ gig swap file. Used 100% of both cores of my 2.0 ghz 2009 mac mini, and used all of the ram.
Regression:
System: Spring 2009 Mac mini. 2.0 ghz core duo, 2 gigs of DDR3 ram, Snow Leopard 10.6.2 , Aperture 3.
Notes:
Possible work a rounds 32bit mode will test tonight. " -
SCCM installation and post requirements
I have searched several threads regarding the permission prerequisites for SCCM installation but have not found one that cleary addresses my question.
I have setup the appropriate permissions with the SCCM computer accounts and site installation service account added
to the local administrators group on the SQL server. Is this access still needed for post SCCM installation or can it be reduces once installation is complete?
I would like to remove the SCCM computer accounts from the SQL local admin group post installation and reduce the SCCM service account from the sysadmin role on SQL.
What is the supported configuration post installation?The official response is that we require admin rights to all site system computers, even after installation. There are ongoing tasks we perform after installation that will fail and generate errors/status messages if you were to remove it.
With that said, for SQL Server:
If the customer removes the local admininstrators group from the SQL sysadmin then we still work.
Hi Wally,
do you mean the SQL sysadmin right for SCCM installation service account is not required after the installation? is it officially supported by Microsoft? -
Apparent mismatch installer and coreinfo
I am attempting to upgrade Win 8.0 x64 to Windows 8.1 x64 (standard editions) using iso images downloaded with my product key. I checked processor hardware compatibility when installing 8.0 and all is fine with windows 8.0. But windows 8.1 won't
install. The installer claims that the CPU doesn't support PREFETCHW instruction and aborts.
However running "coreinfo" (sysinternals) tells me another story - that prefetchw and all other CPU prerequisites ARE INDEED met by my Pentium 4. Inclined to believe this as the 64 bit Windows 8.0 runs just fine. What gives?Hi CHEN,
Thanks for your reply. I need to be more clear...
I wrote...
*The installer claims that the CPU doesn't support PREFETCHW instruction and aborts.*
This message did indeed come from an upgrade attempt from Windows 8.0 x64 standard edition (and I had just installed that fresh (as a clean install) from iso image that I downloaded from the windows store using the upgrade assistant. Your reply might indicate
that I have some mileage in trying this approach again AFTER installing critical & important updates and turning windows firewall off temporarily.
I also wrote..
*using iso images downloaded with my product key.*
I gave up on the upgrade route and downloaded iso images instead using the Media Creation Tool to USB ISO images of Windows 8.0 and Windows 8.1 Standard x64.
Windows 8.0 installs and runs just fine using clean install from USB ISO image.
WINDOWS 8.1 install consistently fails during installation...
The following error message is flashed on the screen (captured by video)
Your PC needs to restart.
Please hold down the power button:
Error Code: 0x000000C4
Parameters:
0x0000000000000091
0x000000000000000F
0xFFFFF80212FC0A00
0X0000000000000000
BIOS offers me control over hyperthreading on/off but the setting has no influence on this behaviour.
===========
Here is what coreinfo has to say about my CPU....
Coreinfo v3.31 - Dump information on system CPU and memory topology
Copyright (C) 2008-2014 Mark Russinovich
Sysinternals -
Intel(R) Pentium(R) 4 CPU 3.00GHz
x86 Family 15 Model 4 Stepping 9, GenuineIntel
Microcode signature: 00000003
HTT * Hyperthreading enabled
HYPERVISOR - Hypervisor is present
VMX - Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
X64 * Supports 64-bit mode
SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT
NX * Supports no-execute page protection
SMEP - Supports Supervisor Mode Execution Prevention
SMAP - Supports Supervisor Mode Access Prevention
PAGE1GB - Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE - Supports direct GS/FS base access
FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 * Supports Streaming SIMD Extensions 3
SSSE3 - Supports Supplemental SIMD Extensions 3
SSE4a - Supports Streaming SIMDR Extensions 4a
SSE4.1 - Supports Streaming SIMD Extensions 4.1
SSE4.2 - Supports Streaming SIMD Extensions 4.2
AES - Supports AES extensions
AVX - Supports AVX intruction extensions
FMA - Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE - Supports XSAVE/XRSTOR instructions
OSXSAVE - Supports XSETBV/XGETBV instructions
RDRAND - Supports RDRAND instruction
RDSEED - Supports RDSEED instruction
CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 * Supports CMPXCHG16B instruction
BMI1 - Supports bit manipulation extensions 1
BMI2 - Supports bit manipulation extensions 2
ADX - Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C - Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR * Supports MONITOR and MWAIT instructions
MOVBE - Supports MOVBE instruction
ERMSB - Supports Enhanced REP MOVSB/STOSB
PCLMULDQ - Supports PCLMULDQ instruction
POPCNT - Supports POPCNT instruction
LZCNT - Supports LZCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF * Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions
DE * Supports I/O breakpoints including CR4.DE
DTES64 * Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL * Supports Debug Store feature with CPL
PCID - Supports PCIDs and settable CR4.PCIDE
INVPCID - Supports INVPCID instruction
PDCM - Supports Performance Capabilities MSR
RDTSCP - Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE - Local APIC supports one-shot deadline timer
TSC-INVARIANT - TSC runs at constant rate
xTPR * Supports disabling task priority messages
EIST - Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 - Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC - Supports x2APIC
CNXT-ID * L1 data cache mode adaptive or BIOS
MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin
PSN - Implements 96-bit processor serial number
PREFETCHW - Supports PREFETCHW instruction
Maximum implemented CPUID leaves: 00000005 (Basic), 80000008 (Extended).
Logical to Physical Processor Map:
** Physical Processor 0 (Hyperthreaded)
Logical Processor to Socket Map:
** Socket 0
Logical Processor to NUMA Node Map:
** NUMA Node 0
No NUMA nodes.
Logical Processor to Cache Map:
** Data Cache 0, Level 1, 16 KB, Assoc 8, LineSize 64
** Unified Cache 0, Level 2, 1 MB, Assoc 8, LineSize 128
Logical Processor to Group Map:
** Group 0 -
Grouped and non-grouped SELECT in one query: help!
look first at: Wrong result when I use CASE on this forum. Here I wanted to get the user who created and the user who solved a problem (Lets call it Validation Error from now on (VE)).
The thing is: I already have a query who returns me lots of information about a VE.
The query in the previous thread returned me additional info about that VE (that is the creating_user and the solving_user). The 1st query is no group select, but the second is! Still, I need to combine those two in one query.
1st query:
select ve.seq,
max((case vah.action when 'C' then vah.ur_code else null end)) created,
max((case vah.action when 'S' then vah.ur_code else null end)) solved
from validation_errors ve
left outer join ver_action_histories vah
on (ve.seq = vah.ver_seq AND ve.log_date = vah.ver_log_date)
where ve.seq = 12860687
group by ve.seq;Result:
seq | created | solved
12860687 Bob Bobdont mind the "where"-clause, it is just to make the query go faster
what I do is: I join the VE with the ver_action_histories table which contains the users and what action they performed on a VE.
Now I just want to add that information to the results of an other query which also returns lots of information about a VE.
2nd query:
select ve.seq "VE seq", mh.seq "Counter seq",
ve.log_date, ve.solve_date, ve.solved Status, ve.failure_code, ve.mde_code,
mh.meter_type,
iv.mr_type, iv.mr_reason,
ih.mmr_seq
from validation_errors ve
inner join meter_histories mh
on (ve.mhy_seq = mh.seq)
left outer join index_values iv
on (ve.mhy_seq = iv.mhy_seq AND ve.log_date =iv.timestamp)
left outer join index_histories ih
on (ve.mhy_seq = ih.ive_mhy_seq)
where ve.seq = 8653936
and sysdate >= mh.start_date
and sysdate < mh.end_date;dont mind the "where" and "and"-clauses ... I hope the result of this query will simplify things ...
Result:
seq | counter seq | log_date | solved_date | status | failure_code | ...
12860687 4568 1-jan-06 2-jan-06 Solved ABCNow the actual question: Is it possible to combine those queries in one query? I just want the results of the first query (creating_user and solving_user) to be added as columns to the second result. Performance is very important. Please tell me that its possible?
Wanted Result:
seq | counter seq | log_date | solved_date | status | failure_code | created | solved | ...
12860687 4568 1-jan-06 2-jan-06 Solved ABC Bob BobIf anything I explained is unclear, please tell so I can try to explain it in an easier way.Try an in line view:
select *
from
( <your first query goes here > ) a
, ( <your second query goes here > ) b
where a.seq = b.seq -
Company: V I Engineering, Inc.
Locations: Various - USA
Salary/Wage: $negotiable
Status: Hourly Contractor
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience required)
Career Level: Intermediate/Experienced
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer Contractor to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have very high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design, development and installation of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box. You will be available to spend extended periods at our customer sites to complete system installations.
Required
5+ years of Systems Integration experience
3+ years LabVIEW experience
1+ years TestStand experience
Experience in Implementation and Delivery of Test Systems, including integration
Experience in ATE usage and development
Experience in building and Integrating Mechanical Fixtures
Experience in Understanding the design of Circuit Boards as they relate to a total system, and their fault-finding
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience
TortoiseSVN
V I Package Manager (VIPM)
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 50%.
V I Engineering, Inc. offers a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer (Contract) employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.Edit
Jeff -
BO XI 3.1 installation and Upgrade activity Steps
Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
j2re1.4.2_04
j2re1.4.2_16
jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
SridharanHi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb. -
Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error
Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
Version: 1201000100
Revision: 0
OS Platform: Generic Platform
Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
Sales office and sales group and sales district
what is the difference between Sales office and sales group and sales district,
please explain,
Thankshi
sales office
A organizational unit in a geographical area of a sales organization.
A sales office establishes contact between the firm and the regional market.
sales group
A organizational unit that performs and is responsible for sales transactions.
sales district
A geographical sales district or sales region.
You can assign customers to a sales district and use the sales district to generate sales statistics.
regards -
Windows 8 64-bit, failed installations and RAID 1 resync on HP ENVY h8-1520z
I recently purchased an HP Envy h8-1520z with a single SSD and 8 GB RAM running Windows 8 Pro 64-bit. I installed 2 Western Digital 500 GB WDC WD5000AAKX-001CA0 HDDs on SATA ports 5 & 6 and configured them as RAID 1 in the BIOS. I have started installing apps on the RAID 1 array (E since the SSD is only 256 GB.
While installing software, some install fine, but often the installation hangs with no errors indicated and I have to kill the installer task through task manager. I usually follow that with a system shutdown or restart and almost every time that results in a resync of the RAID array. Sometimes the shutdown or restart is quick, and other times it takes several minutes with intermittent disk activity as indicated by the drive light. I have sometimes given up after 10 minutes or so and powered down by holding down the power button. I can understand a resync after the forced power down, but it seems that all it takes to cause a resync is a failed installation, and that seem to happen a lot, even with software that explicitly says it is Windows 8 compatible. Sometimes the applications run fine even after an apparently failed installation and other times not so much.
Has anybody else seen this behavior or have any suggestions? I’d like to get this sorted out before I load any more software.Hi,
Did you check each hard drive for straps? There should not be any straps installed on the hard drive. These drives do have strapping posts.
Did you use the AMD RaidExpert to create the array volume? Did you wait until the RAID migration was complete before using the array volume?
Check the AMD RaidExpert for errors. It's possible that you have a bad hard drive(s).
Many applications want to be installed on the C drive. Your SSD is 256GB so you should have plenty of space for most applications and the application performance will be improved. Use the RAID 1 array to keep and store your data. The mirroring process of RAID 1 will protect it in case one hard drive fails.
You might want to consider removing all of the data etx.. from the array, use the AMD RAIDExpert to delete out the array volume. I would then run for hard drive diagnostics. If the hard drives are free from errors then use disk management to separately reformat each hard drive. Now go back to the AMD RaidExpert and create your new array volume.
Be sure to review the software and bios updates for your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
What happened to my tabs and tab groups when I synced to a new computer?
I have spent the morning trying to sync Firefox. On my previous computer, I was running FF31, but not as a clean install--as an upgrade from FF28. In the Sync screen, I saw my email address and recovery key, so I thought I was good to go.
Turns out that that wasn't the case, and I needed to set up a new Sync account.
Here are the steps I took to get my data back:
1) I uninstalled FF31, reverted to 28, used my email address and recovery key, and got my information back.
2) Then I updated to FF31.
3) In FF31, I unlinked my computer, created a new Sync account, and logged in to sync my data.
However, I was unable to access my tab groups. And when I upgraded to FF31, my tab groups still weren't back.
I tried looking in "Tabs from Other Devices", and there were no other devices listed.
How can I get my tabs and tab groups back? I had literally dozens of hours of work-related research saved in these tabs. I have so many visited sites in my history that there's no way I'd be able to recreate all of them.
Please help--I'm desperate. I can't lose all of those tabs.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
Firefox loses my tabs and tab groups
I closed down my system normally last night. Firefox closed down. When I started up Firefox this morning all of my tabs and tab groups had gone - AGAIN!
Firefox has done this to me several times and I have never been able to recover my tabs and groups by any of the methods described previously. I am currently using FF 29.0.1 on Windows 7 Ultimate. This loss of tabs and groups has happened in exactly this way on several previous occasions over quite a few years with different versions of FF.
My history is still present.
Leading up to this I have noticed that FF 29.0.1 was not faithfully preserving tab states. There have been several tabs where, during a session, I have changed the URL that the tab was pointing to only to find that FF has preserved the original URL for that tab when I have restarted it the next morning.
I have come to suspect that what is happening is:
1) FF saves the tab and groups state in sessionstate.js on close down (and at intervals while running). It creates sessionstore.js with a syntax error in it.
2) On start up FF loads sessionstore.js, hits a syntax error, (silently) decides that it can't use that store and creates a new one, thereby losing all information in the previous sessionstore.js.
When I save the new sessionstore.js as something else, rename sessionstore.bak to sessionstore.bak.js and then double click it to launch it I get an error dialog:
Line: 1
Char: 11
Error: Expected ';'
Code: 800A03Ec
Source: Microsoft JScript compilation error.
Here are the first few characters of the file:
{"windows":[],"selectedWindow":0,"_closedWindows":[{"tabs":[{"entries":[{"url":"http://php.net/",
The frustrating thing is that I (think I) can see data in there relating to my tabs and groups. Because the JS is minified it's almost impossible to extract the data structures in a meaningful way. Because the file is so large (>2.9MB) and the syntax error my code editors can't make any sense of prettifying it so it's very difficult to pull apart.
I question the use of JS for preserving data in this way. There may be performance reasons for using JS. Wouldn't it be better to use something like XML? At least us poor humans would have a chance of eyeballing the data and doing a manual recovery if necessary. Sod it! We could even write a program to load up the tabs ad groups from the XML!
I have wondered about using Firefox Sync for all of my systems. My worry is that a problem on one machine will blow away my settings on all of them. Does anyone have any experience with respect to FF Sync in this respect?
I've preserved copies of my sessionstate.bak (along with the previous one) in the hope that someone may have a way of recovering the tab and group information contained in there.
If anyone has any suggestions about recovering the tab and group information I'd be really glad to hear them. I can't say loudly enough how frustrating it is to keep losing the tabs and groups. Each time it happens it blows away the context of the several jobs that I'm doing at any one time.
Oh. And I'm writing this message using Chrome as my browser.What have you tried for session recovery so far?
3MB is quite large and may well indicate some corruption. Still, since as you can see it is largely text, you often can extract the URLs. Doing that by hand would be arduous...
I assume you have seen the following links in other threads mentioning data mining techniques to rescue the URLs from the sessionstore.js or sessionstore.bak file:
* Using Firefox's Browser Console (formerly known as Error Console): https://support.mozilla.org/questions/969046#answer-471950
* Using Firefox developer tool "Scratchpad": http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147
* Using a third party website: https://firefox-session-restore.herokuapp.com/
Do any of those work on your file(s)?
Maybe you are looking for
-
How do I create an Icon so to run my java program..
I have a program with many different classes, thing is, I now want it as an executable file, meaning I click on one icon to run the whole program and its associated classes, I am not sure if this is where the topic should be posted but would apprecia
-
How do you make a audiomixdown of 4 Audio Tracks in a Sequenz ?
I have the following Problem. A Sequenz with 4 different Audio tracks. 2 Tracks with ambience sound,1 channel with voice over and 1 channel with the interview sound. For the final playout i need on channel 1 the final mix of all 4 tracks and on chann
-
Hi everyone Sorry, I'm a real beginner - I'm sure this will be quite straight forward. I have created a simple table on a blank document at the left hand side of a landscape page. I want to copy and paste the table in the right hand side of the docum
-
pls... someone can tell me how can i extend the time for the sms and alarms tones?? because jus long 1 min .... and i have track whit 4 min or more that i want to set like a alarm or sms tone!
-
Itunes freeze on Vista 32Bit with Ipad2
Hi All. I have the following: a. Ipad2 64GB wifi - 4.3 b. Windows Vista 32 Bit Home Premium c. Toshiba laptop satellite with 4GB ram and 2+Ghz proc d. Itunes 10.2.1.1 It took me considerable time (6 hours +) to get Itunes to start running on my syste