V8.2.1: generic file i/o error while loading VI's
Hello,
I had a large LV application open and running fine. I closed it, and upon re-opening the top-level VI it gives "Generic File I/O Error" on several sub-VI's (belonging to me, not LV). Opening those sub VI's individually reveals no problem at all, and in any case the whole code base lives in a Subversion repository and I have tried checking out a fresh copy of the whole source code tree and the problem re-appeared. Before Labview displays the "File I/O error" it will hang for several minutes with no disk or CPU activity.
I just tried checking out a fresh copy of the source tree on a separate computer. Now Labview is hanging while loading "<vilib>:\DAQmx\create\channels.llb\DAQmx Create Channel (CI-GPS Timestamp).vi" after having managed to load 920 VI's. On edit: I spoke too soon. It is now duplicating the "Generic File I/O Error" on one of my sub VI's.
If anyone has any clue to this strange behavior please let me know.
Thank you,
-Brian
Message Edited by brian_g on 04-08-2008 11:43 AM
Message Edited by brian_g on 04-08-2008 11:44 AM
What I found was this...
My code calls a bunch of subVI's in another directory. Those subVI's in turn had some unwise paths saved in some of them that loaded other subVI's from a network shared drive instead of the local disk directory.
The network shared drive had been taken off line since the computer was delivered to a customer last Friday. When LV tried to load the VI's from the shared drive, it would hang for about 5 minutes, then give the "Generic File I/O Error" with an "Ok" button to continue. I eventually sat and did this for about 13 VI's, taking most of an hour while waiting for the network reads to timeout.
Once my now-broken application loaded I was able to successfully re-direct the missing VI's to the local disk, resolving the problem.
The "Generic File I/O Error" message could not be less useful in this case and I'm rather irritated by the genericity of the message. Something like "Network read failed" would have immediately illustrated the problem and kept me from wasting a whole lot of time deciphering it.
Similar Messages
-
Error while loading the WSLD file
Hi all
I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
Its an XI webservice, so i cannot view it from Webservice navigator.
How could i find out that, the problem is with the Webservice or i am missing any thing
Kindly help
regards
DeepuHi
I checked the log and i am getting the following exceptions
1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
3. java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
Is this any authorization problem
regards
Deepu -
Generic file I/O error. Cannot save VI "filename.VI"
Hi, I have LV 8.2. I am having problems saving VI's after editing them. I am getting the message:
Generic file I/O error. Cannot save VI "filename.VI"
I can recreate the problem by creating a blank VI, placing a property node on the block diagram, right clicking on property and choosing, select property and in the window that pops up expanding Application and clicking on Directory path and clicking OK. I save this VI to disk. Then I load the file again and delete the property node. Now if I try to save that I get: Generic file I/O error. Cannot save VI "filename.VI"
Furthermore with the real VI that I am having problems with. If, when I get the cannot save message, I do a "Save as" and save a copy as "filename backup" and then quit labview without saving the "filename" vi, when I run LabVIEW again I get:
The last time you ran LabVIEW, an internal rror or crash occured at save.cpp, line 821.
I click investigate internal error message now and get told there is a logfile of the error. The contents of the file on one occasion were, quote:
#Date: Thu, 9 Nov 2006 10:56:40 a.m.
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.2
#AppKind: FDS
#AppModDate: 07/27/2006 00:08 GMT
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 43 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x008CCBB6 - LabVIEW <unknown> + 0
0x008D17CE - LabVIEW <unknown> + 0
0x0100F864 - LabVIEW <unknown> + 0
0x00528E26 - LabVIEW <unknown> + 0
0x00529342 - LabVIEW <unknown> + 0
0x0052960C - LabVIEW <unknown> + 0
0x004D6D2F - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004D7CD8 - LabVIEW <unknown> + 0
0x004DBA95 - LabVIEW <unknown> + 0
0x004DBD50 - LabVIEW <unknown> + 0
0x0051FD4C - LabVIEW <unknown> + 0
0x0051FD6F - LabVIEW <unknown> + 0
0x0122CA73 - LabVIEW <unknown> + 0
0x77E735DD - kernel32 <unknown> + 0
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics 9 nov BU1.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 45 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x00D0FE4B - LabVIEW <unknown> + 0
0x008C8E17 - LabVIEW <unknown> + 0
0x008D1726 - LabVIEW <unknown> + 0
0x008D212C - LabVIEW <unknown> + 0
0x00C41E5E - LabVIEW <unknown> + 0
0x00C46F31 - LabVIEW <unknown> + 0
0x00C4796D - LabVIEW <unknown> + 0
0x00C497C6 - LabVIEW <unknown> + 0
0x004CCB39 - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004DF19A - LabVIEW <unknown> + 0
0x77D48654 - USER32 <unknown> + 0
0x77D48723 - USER32 <unknown> + 0
0x77D48999 - USER32 <unknown> + 0
0x77D48FD2 - USER32 <unknown> + 0
End of Quote:
Any ideas?Hello,
Sorry you've encountered this problem. The cpp error is a known issue, which is filed under corrective action request number : 42BI4OO5. In a nutshell, this means R&D is looking into the problem. I attempted to reproduce the problem as you described below, but I did not get the "Generic file I/O error" as you did.
If you have any further insight or detail which perhaps is the key to reproducing this, please repost, and I'll try to reproduce this again! In the mean time, does it help to copy and paste your code to a new VI, or does that VI suffer the same problem?
Thank you,
Best Regards,
JLS
PS -
Standard CAR Response:
"This was reported to R&D (42BI4OO5 CAR ID) for further investigation. Thanks for the feedback!"
Best,
JLS
Sixclear -
Get Generic File I/O Error when running DAQ Reference Design
I Get a Generic File I/O Error when trying to Save Data to Disk in Data Acquisition Reference Design.lvproj from daq_ref_app_v10.zip in LabVIEW 9, If I configure to simulate one channel, start the acquisition, stop the acquisition and then save the data to disk, I get the generic file I/O and:
Error 6 occurred at TDMS Open in Data Acquisition Reference Design.lvlib:Logging [TDMS].lvlib:TDMS Data Logging.vi->Data Acquisition Reference Design.lvlib:Main.vi
Shouldn't this work without error?
Should NI distribute Reference Desgins that work without errors?
What is the problem with this application?This error usually occurs because of malformed file paths. Put an indicator on the path before the TDMS Open so you can see the path explicitely. Make sure you have full permissions for the directory in which you will be saving and make sure that the path isn't greater than 255 characters.
Have a great day!
Tanya V
National Instruments
LabVIEW Platform Product Support Engineer -
Failed to add item: Generic file I/O error
One of our iPhone users once in a while gets this response in e-mail from our mobility server since we updated it to Mobility 2.0.1.
From: Mobility Administrator
Date: 18 Jun 2014 22:56:26 GMT+2
To: "Username" <[email protected]>
Subject: Failed to Add Item
Mobility failed to add the following item because: Generic file I/O error
Item Type: Email
Subject: Re: Project blabla
From: Mobility Administrator
Date: 17 Jul 2014 23:00:48 GMT+2
To: "Username"
Subject: Failed to Add Item
Mobility failed to add the following item because: Generic file I/O error
Item Type: Email
This one came two times with only 3mins between. Was a response to separate e-mails.
Strange symptom: The message is saved, sent and delivered anyways.
Occurrence: maybe once every 4 weeks.
Sent to both internal as external addresses.
Plenty of free space on both the Mobility and GWIA server.
Update order: Data Synchronizer 1.2.5 to 2.0.0 (CD update) and then through yast-patterns to 2.0.1 everything according to the upgrade manual.
Update date: 26/may/2014
All hard disks in SAN are fine, running on VM SLES11SP2
Any ideas what might be causing this?In article <[email protected]>, Jvzuijlen wrote:
> @konecnya: I'm not sure which volume type was used as this is our GW
> administrators job, but reading the installation documentation i think
> it is an NSS volume specially created for it. It's SLES11SP2 running on
> XenServer. The GRPWISE partition is: /dev/xvdb
that tells me more about the underlying XEN side, i.e. What 'hardware' is
in use. A df -h can tell better if it is an NSS volume, as per this
example.
Filesystem Size Used Avail Use% Mounted on
/Dev/pool/MAIL 750G 310G 441G 42% /opt/novell/nss/mnt/.pools/MAIL
MAIL 600G 308G 293G 52% /media/nss/MAIL
>
> But i think the first thing we should test is working with the backup
> settings. Probably the backup is set to lock the files during backup.
> Our administrator will look at this when he's back from his holidays.
Has your administrator had a chance to look into this yet? Backups do
need to respect databases better than just locking their files, it needs
to be a cooperative action.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks! -
I am getting error while loading the XML file. I have attached the jpg file which shows error details.....pls let em know the solution....
thanksWhat is the error message? Where is the jpeg?
-
Error while Loading data through .csv file
Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
Error while loading .app file in HFM Classic
Hi,
I am getting an error while loading a sample HFM .app file which I have generated using DRM Export for the Account hierarchies. The log file gives the following error
The file is attached.
Please help! Thanks!Hi there,
The issue is the question mark at the beginning of the sentence:
The correct format is:
Cheers,
Thanos -
Error while loading data to ASO database using rules files and buffer id
Hello all,
While loading the data to our ASO cube from a data file and using a server rules file, I am getting a warning: "Incorrect Syntax near ['$'] ". But my script no where mentions the usage of $. Also the console throws no error while loading the data. It displays the progress bar 0-100% while the data is being loaded, but actually no data is getting loaded (when retrieval is checked). Also the script is unable to form any log file or error file. Can anyone throw some light what might be the reason behind this kind of data load behaviour.
Thanks in advance.
Amitis that the real script? I don't see you using any parameter. (That's where $ comes to play). Try a double quote with echo (I never used echo in MaxL)
Also don't post passwords and server names on a forum.
Regards
Celvin
http://www.orahyplabs.com -
Error while loading data into External table from the flat files
HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
KartheekKartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry -
Error while loading java file in Oracle
Hi,
I am facing error while loading java class into oracle . Can you please help
-bash-3.2$ cd /export/home/sacuser/
-bash-3.2$ loadjava -user sacuserdb/sacuserdb@BLM - resolve Oracle_Validator/src/com/nec/blm/oracle/validator/Validate.java
unrecognized or badly formed option -
loadjava: Usage: loadjava [-definer] [-encoding encoding] [-force] [-genmissing] [-genmissingjar jar] [-grant grant s] [-help] [-nousage] [-noverify] [-oci8] [-order] [-resolve] [-resolver resolver] [-schema schema] [-synonym] [-th in] [-tableschema schema] [-user user/password@database] [-verbose] classes..jars..resources..properties...
-bash-3.2$ loadjava -user sacuserdb/sacuserdb@BLM -resolve Oracle_Validator/src/com/nec/blm/oracle/validator/Validate.java
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x0
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at oracle.jdbc.driver.T2CConnection.t2cCreateState(Native Method)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:346)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:413)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:131)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:77)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
- locked <0xf5fdc448> (a java.lang.Class)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
- locked <0xf5fdc448> (a java.lang.Class)
at oracle.aurora.server.tools.loadjava.DatabaseOptions.getConnection(DatabaseOptions.java:180)
at oracle.aurora.server.tools.loadjava.DatabaseOptions.connect(DatabaseOptions.java:123)
at oracle.aurora.server.tools.loadjava.LoadJavaState.getConnection(LoadJavaState.java:409)
at oracle.aurora.server.tools.loadjava.LoadJavaState.getOldMD5(LoadJavaState.java:696)
at oracle.aurora.server.tools.loadjava.ClientSchemaObject.getOldMD5(ClientSchemaObject.java:52)
at oracle.aurora.server.tools.loadjava.SchemaObject.doCreate(SchemaObject.java:172)
at oracle.aurora.server.tools.loadjava.SchemaObject.process1(SchemaObject.java:215)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:532)
at oracle.aurora.server.tools.loadjava.LoadJava.addSource(LoadJava.java:574)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:439)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:380)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:349)
at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:652)
at oracle.aurora.server.tools.loadjava.LoadJava.processDeferredFiles(LoadJava.java:617)
at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:818)
at oracle.aurora.server.tools.loadjava.LoadJava.command(LoadJava.java:251)
at oracle.aurora.server.tools.loadjava.LoadJavaMain.run(LoadJavaMain.java:103)
at oracle.aurora.server.tools.loadjava.LoadJavaMain.main(LoadJavaMain.java:28)
Dynamic libraries:
0x8050000 /opt/oracle/product/10g/jdk/jre/bin/java
0xfef80000 /lib/libthread.so.1
0xfef40000 /lib/libdl.so.1
0xfee10000 /lib/libc.so.1
0xfea00000 /opt/oracle/product/10g/jdk/jre/lib/i386/client/libjvm.so
0xfedd0000 /usr/lib/libCrun.so.1
0xfedb0000 /lib/libsocket.so.1
0xfe960000 /lib/libnsl.so.1
0xfed90000 /lib/libm.so.1
0xfedc0000 /usr/lib/libsched.so.1
0xfe900000 /lib/libm.so.2
0xfed40000 /lib/libscf.so.1
0xfe8e0000 /lib/libdoor.so.1
0xfe8b0000 /lib/libuutil.so.1
0xfe890000 /lib/libgen.so.1
0xfe870000 /lib/libmd.so.1
0xfe850000 /lib/libmp.so.2
0xfe830000 /opt/oracle/product/10g/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe3d0000 /opt/oracle/product/10g/jdk/jre/lib/i386/libverify.so
0xfe3a0000 /opt/oracle/product/10g/jdk/jre/lib/i386/libjava.so
0xfe380000 /opt/oracle/product/10g/jdk/jre/lib/i386/libzip.so
0xf9e80000 /opt/oracle/product/10g/lib32/libocijdbc10.so
0xf0e00000 /opt/oracle/product/10g/lib32/libclntsh.so.10.1
0xf0c60000 /opt/oracle/product/10g/lib32/libnnz10.so
0xf9e60000 /lib/libkstat.so.1
0xf9e30000 /lib/libaio.so.1
0xf1b60000 /lib/librt.so.1
Heap at VM Abort:
Heap
def new generation total 576K, used 237K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 45% used [0xf1e00000, 0xf1e3a058, 0xf1e80000)
from space 64K, 8% used [0xf1e90000, 0xf1e915c0, 0xf1ea0000)
to space 64K, 0% used [0xf1e80000, 0xf1e80000, 0xf1e90000)
tenured generation total 1408K, used 204K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 14% used [0xf22e0000, 0xf23130f0, 0xf2313200, 0xf2440000)
compacting perm gen total 4096K, used 2662K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 65% used [0xf5e00000, 0xf6099a38, 0xf6099c00, 0xf6200000)
Local Time = Mon Jun 17 16:29:08 2013
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
# An error report file has been saved as hs_err_pid27805.log.
# Please refer to the file for further information.
Abort (core dumped)Please try to compile your java source file with jdk avaiable in ORACLE_HOME\jdk\bin\javac.
load the compiled class file in oracle DB using loadjava utility.
loadjava -user scott/tiger javafile.class -
Error while loading data on to the cube : Incompatible rule file.
Hi,
I am trying to load data on to essbase cube from a data file. I have a rule file on the cube already, and I am getting the following error while loading the data. Is there any problem with the rules file?
SEVERE: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
com.essbase.api.base.EssException: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
at com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
at grid.BudgetDataLoad.main(BudgetDataLoad.java:85)
Error: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
Feb 7, 2012 3:13:37 PM com.hyperion.dsf.server.framework.BaseLogger writeException
SEVERE: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
com.essbase.api.base.EssException: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect.essMainLoadBufferTerm(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin.essMainLoadBufferTerm(Unknown Source)
at com.essbase.api.datasource.EssCube.loadBufferTerm(Unknown Source)
at grid.BudgetDataLoad.main(BudgetDataLoad.java:114)
Error: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
Thanks,
Santhosh" Incompatible rule file. Duplicate member name rule file is used against unique name database."
I am just guessing here as I have never used the duplicate name functionality in Essbase, nor do I remember which versions it was in. However with that said I think your answer is in your error message.
Just guessing again.... It appears that your rule file is set to allow duplicate member names while your database is not. With that information in hand (given to you in the error message) I would start to explore that. -
Getting error while loading Flat File
Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
pathHi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy -
Error while loading WSDL File in Eclipse
Hi Experts
We are getting the following Error while Loading WSDL File in Eclipse.
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
Please advice how to resolve it.
Regards
PrashantIt seems that your WSDL is not well defined, you need to test your wsdl via WS-I compliance in order to check if the wsdl is well created, you can do this via soapui, just create a new project, import the wsdl file or set the URL, left click in the project and select check WS-I compliance, this tool will test your wsdl and gives you a detailed report of what might be the problem.
Maybe you are looking for
-
Z10 Facebook and Twitter notifications
I receive very rarely notifications from Faceboond and Twitter. Never received direct message notification from Twitter. Anybody has the same issue?
-
Can I archive my iMovie project to an external drive? how?
I have been searching this forum for an answer but so far have only found how to save my iMovie project to DVD. The problem is, my movie is too big to fit on one DVD. Trash is empty; still no go. I do have a LaCie external firewire drive - can I just
-
Downloading Photoshop Elements 11
Hi, I purchased this back in August of 2013. I just had to buy a new computer and need to download again. I have a serial number and order number but I am not seeing anywhere to download this an re-install in y order history. Please advise. thanks.
-
Why do I get a java.lang.OutOfMemory exception
Thanks, in advance, for you help. I just wrote a fairly large program. Every time I run it, I get a java.lang.OutOfMemory exception. I have no idea how to debug my code. Why would I get such an exception and how would I debug it?
-
Cant update credit card details even using chrome
Hi, I cant update my credit card info, I have tried lots of time and with chrome and I always get this message below, its very frustarting and wasting a lot of my time. Please advise, Thanks, Ben 'We're sorry, something seems to be wrong on our end.