V880 does not see Ultrium LTO 2 drive

I have an IBM Ultrium LTO2 drive connected to the back of a v880 using a vhcdi cable. Looks like this critter:
http://www.techtradepartners.com/ebayPictures/Drives/Tape/Ultrium_LTO2.jpg
Problem is, the v880 doesn't see the thing when issuing probe-scsi-all. I just pulled the drive off a Linux box where it was working fine. Anyone know if this thing needs some special jumper settings for a SUN box?
Thanks

I know when I hooked up my Drive to my router I had to turn off the Router, plug in the drive, then turn on the drive and turn on the router.
Let me know if that works.

Similar Messages

Aperture import does not see files on hard drive

This happens again and again, and it's EXTREMELY irritating.
I am trying to import some existing JPEGs on my Desktop. When I try Import in Aperture, the file browser simply does not see most files and folders. Sometimes it does and sometimes it doesn't. It seems to happen on a whim. This is very bad, I have just about had it with Aperture. And yes, permissions are set correctly.
Can anyone figure out on what basis Aperture sees or does not see certain files/folders?

I am trying to import some existing JPEGs on my Desktop.
Do you mean your Desktop folder? And is the Desktop folder the only folder that is showing this behaviour? I have never had problems to open images directly from the Desktop. Have the image files been dropped directly onto the the Desktop or into a subfolder of the Desktop?
Previous MacOS X versions had problems with a huge number of files on the Desktop because this folder has been treated in a special way.
Which version of Aperture and MacOS X are you using?
It might be a problem with permissions or file ownership.
If the problem with your Desktop folder persists you could try to reset the permissions,ownership, and access control lists on your Home folder as described in Linc Davis's post here: Re: iPhoto returns OSStatus error -54
Have you by any chance encrypted your Home folder by File Vault?

Macbook pro does not see internal DVD/CD drive

Our macbook pro 4,1 running OSX 10.8.5 (12F45) no longer seems to recognize the internal DVD/CD drive.
Both the ATA and Disc Burning listings for the MBP say there are no devices of that type listed.
This started when my wife attempted to play an audio CD-R which I had burned on my macpro 1,1 running Snow Leopard and using Itunes 11.4. The icon for the CD did not show up and the disk didn't play. It also would not eject. (She had just successfully played another audio CD-R which I had burned on my macpro). After some research, we found that the 'stuck CD' is a common problem and the solution that worked for us was cold starting with the trackpad button depressed while shaking the **** out of the computer (and giving it a few 'love taps') .... several tries without the physical encouragement failed before adding shaking ... then it ejected the CD.
So .... we were able to remove the offending CD, but when I tried one that had worked before, a commercially produced CD, it got stuck too and required the same draconian procedure to get it to eject.
I re-cold started the MBP with an empty optical drive and then brought up the Hardware Overview. It said there was no ATA device and no Disc Burning device. The device itself must be getting power, because when the CD was stuck, you could hear it trying to do something when you hit the eject key, and when we finally discovered how to force ejection, the mechanical sound associated with disc ejection could be heard.
I seriously doubt that the optical drive has just stopped working. Instinct tells me that the attempt to read an audio CD that was somehow incompatible caused the opsys to be configured in a way that makes it unable to communicate with the optical drive directly. Any suggestions on how to investigate this, possibly from the Terminal, would be greatly appreciated.

Thanks Joe - but I have discovered how to free the stuck CD from the drive.
The problem now is that OSX 10.8.5 does not recognize the presence of the optical drive at all. It does not show up in Disk Utility's list of drives/volumes and does not show up in the ATA or Disc Burning categories in the system profiler. For example, I can insert the system disc, which the drive accepts, but the install/utilitiy app does not fire up .... not initially, nor after I cold start while holding 'C'. The system doesn't see it.
Applecare was willing to try to assist me for free, but the agent, after helping me run the Disc Utility from the cold start Recovery System, claimed it was a faulty optical drive. Though this is quite possible, I'm still skeptical and have a local mac guru coming to look at it (for a fee) on Monday, 2/9/15.
In some of my research regarding the stuck CD, there was mention that a CD programmed on a different drive (in a different mac) initiated the sticky CD problem, and implied that something about the CD corrupted something in the guts of the guts of the OS. But if true, Disk Utility, which likely communicates to the optical drive thru the OS, may not be able to see the drive. It'd be nice if there was some diagnostic software that runs on an intel mac that completely runs independently of the OS but with full privileges to directly query the hardware I/O channel(s) that directly talk to the optical drive. If you know of such an animal, that would be helpful and might save me from buying a new optical drive when it's really a system corruption problem.
David

Bridge does not see both external hard drives

In either CS3 or CS4, Bridge does not recognize my second external hard drive. Photoshop and lightroom see both drives. I am using a laptop and Windows xp.
Thanks,
mIKE

Those directories are modified in the User Preferences tab in the Setup Room.
When you've got the file tree dialogue box open, you'll need to point Color to the "Volumes" level, once there, you should see your external drive.

Migration Assistant does not see my WD backup drives!

Apple recalled my Seagate HD and I just had it replaced with a new HD at the Genius Bar. I picked up my iMac today and am now attempting to RESTORE with my backup to my new (internal) HD. However, when I used the Setup Assistant, it did not see either of my external backup drives. I continued through the setup process and thought I'd try the Migration Assistant. Even THAT did not see either of my back up drives. When I use Time Machine to RESTORE, I navigate to the latest folder but the Restore button is greyed out.
The drives are both on my desktop and they work in the Finder with no issue, I've repaired and verified both and they check out just fine. I've seen this problem in other posts in the Apple forums and elsewhere on the web, and I've tried the suggestions with no success. Some I haven't tried because they refer to Lion—I have 10.6.8.
BTW: I had a HD fail on my MacBook a year ago and after the new HD was installed, I ran the Setup Assistant on it and everything went smoothly (same BU drive manufacturer) when restoring with the backup.
Do I need to go back to Genius now (no no no!) or call Apple Support (yikes!)?
I am going MAD without my Mac!
Any suggestions welcome.
Thanks—katorama

Thanks sanjampet.
I called Apple support and the tech had me make a bogus account with a different user account name. I then logged into the bogus account and ran Migration Assistant. MA cannot override while logged into your main account, thus the bogus one is needed.
Turns out that while in MA, you will *not* see your backup drive in the list when it comes to the "select a drive" screen. It wants you to select a drive to migrate to, not from. Once you select the "Macintosh HD" and Continue, Migration Assistant will locate your latest backup and restore it to your new HD.
Once the migration is complete (this takes a while of course), log out of the bogus account, then log back into your main account. You can delete the bogus account.
That's it!

My MacBook pro does not see my external hard drive

I have an external hard drive La Cie (Porsche 250 gb).
Once I disconected it incorrectly.
Since that time it doesen't work
More specifically when I try to work with the hard drive the following message appears:
'Eject; Initialize or ignore'
I also tried to verify the disk with 'Disk Utility' but it doesn't work
Does someone know how I could access to the disk without formatting it?
Thank you
Lorenzo

I also tried to verify the disk with 'Disk Utility' but it doesn't work
I assume that mean your can "see" the external from DU? Normally, if DU can see the disk but can't repair it, you'll need something stronger like DiskWarrior. DW's strength is in recovering and rebuilding directories, the cause of most drive problems.
AJ

My hp pavilian dv9620 does not see the cd/dvd drive

running Windows 7. The cd/dvd drive has disappeared. It is not in the BIOS. Can not eject the dirve (except during boot sequence)

Hi:
Please see if one of these two fixes work for you.
Auto fix:
http://support.microsoft.com/mats/cd_dvd_drive_problems/
If the autofix doesn't work, try the manual fix listed under the heading "Let Me Fix it Myself."
http://support.microsoft.com/kb/982116
Paul

Yosemite bug? Itunes Home sharing does not see library on additional drive

I have a 2011 iMac 27" with two internal drives, an 256GB SSD main drive and a 3TB hard drive (/Volumes/Media). My iTunes library is held on the 3TB drive for space reasons, and the correct path to the library is in Preferences > Advanced. I have enabled Home Sharing, and have made sure that the sharing tab is correctly set to allow all content to be visible.
On my 2010 Macbook Pro, I can connect to the iMac iTunes through Home Sharing (there is an entry in the drop down list at top left), but I can see no content at all.
If I change the path to back to the default library in Preferences on the SSD drive (i.e. /Users/david/Music/iTunes/iTunes Media) rather than the real library (/Volumes/Media/Itunes/Itunes Media) and import a song, then that song immediately becomes visible on the Macbook Pro.
Therefore, the actual mechanism for streaming the content seems to be working, but it only seems to work if the library is on the default disk.
Is this

Hello keepitup67,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario

My iMac suddenly does not see any external hard drives

1 x external HD (USB2), 3 x USB2 flash drives - all previously used without any problems.
I have checked DiskUtility, and they do not appear.
I have checked Finder/Preferences/General and the external HD box is checked.
I have run every diagnostic available with MacKeeper and there are no issues detected (all duplicate files, wasted space files, cache files, etc have been "repaired". Still nada.

Thanks baltwo,
This solved it for me...well, mostly. Two of the flash drives are working, as well as the ext HD (though the cable I was using also needed replacing, but it works fine, thankfully). The third flash drive still not working, but I think it's the drive itself - had to use it at work a few months back on a PC and I'm pretty sure it got corrupted. Ah well!
Cheers

IMac does not see my external hard drive after recent update

Is there a reason why my external hard drive is not being 'seen' by my iMac after the most recent update to the system?

managed to solve it myself after reading some other information on other forums.
Powered hard drive and iMac down, plugged hard drive in, turned on iMac, connected hard drive. Bingo.

Portege M400: Vista does not see the CD/DVD drive

Hi
I have upgraded my M400 to Vista and now it seems I have a problem with the driver for my DVD drive.
I don't see a vista driver for the DVD drive.
Any ideas?
Steve

>OK ... so any idea why Vista would say that the driver is invalid?
Possibly because of the registry problem
Try this;
Enter the device manager and remove the drive from the system.
Then reboot the notebook. The Vista OS should initial and install the new device (CD/DVD drive) again.
Then go to the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the notebook again.
Hopefully it helps!

Since installing Lion, I have not been able to utilize Time Machine (does not recognize the back-up drive); my wireless mouse does not function properly; I have experienced unreasonable delays in the system. Is there a fix or upgrade coming?

Is there a fix or upgrade to deal with the many problems I am experiencing since I installed Lion? I can no longer utilize Time Machine (Does not see the back-up drive); my wireless mouse does not work properly; my iMac has slowed down considerably. I am reminded of having a PC machine again. Bummer!

Either downgrade to Snow Leopard or try reinstalling Lion.
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

I updated to iTunes 10.7 and now iTunes does not see my iPod Touch. It says the Apple Mobile Device USB Driver cannot be installed.

I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

My mac Doesn't seem to see my external hard drive (seagate 1tb) I have it usb'd in to the back of my computer, but when I open time machine...it does not see it. Help

My mac Doesn't seem to see my external hard drive (seagate 1tb) I have it usb'd in to the back of my computer, but when I open time machine...it does not see it. Help...please

Yes...at least I thought it was....I have 10.6.8.
That's the whole issue. I want to run/install photoshop elements but I have to have 10.8. for that. So...be fore I install an upgrade (Yosemite is getting BAD press) I thought I'd check my back up...it's not there...I have the seagate plugged in and the usb into the back of the mac...when I try to turn the time machine "ON" it says airport device not found not ....
By the way...I REALLY appreciate the help here....

V880 does not see Ultrium LTO 2 drive

Similar Messages

Maybe you are looking for