V890 Console login - user name and passwd

I have a brand new V890. Booted it up. Tried to connect through the RSC console, it is prompting for a login and passwd. ANy idea what's the default is ?
TIA
-Shyam

well, just to close the loop on this, apparently the power voltage that this particular server needed was 220v and yet it had been pluged into the 110v - which is not enough to power up all of the components, but IS enough to power up the low-level RSC - which was the only port (as opposed to the console port) that had been producing any output.
once sufficient power had been provided, the system proceeded with POST, etc. and access via the console port was possible.

Similar Messages

User Name and/or Password not accepted

I am trying to install something so it is asking for my username and password. No matter what I enter it says it is invalid. I have tried resetting my password and logging out and logging back in with the new password which worked. But still when I get to the install page it asks for my login username and password and then denies it.

Molly Blank wrote:
I am trying to install something so it is asking for my username and password. No matter what I enter it says it is invalid. I have tried resetting my password and logging out and logging back in with the new password which worked. But still when I get to the install page it asks for my login username and password and then denies it.
When you boot Leopard and get to the Login Screen, do you enter the same Login User name and password?

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Automatic login in mavericks not working. I still have to enter user name and password

I upgraded the original Hard Drive to SSD drive. After the upgrade, I can no longer automatically log in. I now have to enter my user name and password. I tried resetting automatic login in Users and Groups but it doesn't work in Mavericks.

Hello,
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?
How about these?
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
https://discussions.apple.com/thread/5225064?tstart=0

Oracle e business suite user name and password to login oracle bi?

Hi,
it is possible to use oracle e bussiness suite user name and password to login oracle BI PUBLISHER SERVER.??
we are using 11.1.1.6.0 OBIEE and R12 (12.0.6) e business suite.

SAURAV KUMAR SINGH wrote:
During Oracle Installation i have given SID : RD1 & Password :admin@1234
... insert BUZZER sound here ...
Using "@" in a password for a DB User is not supported at all (allthough it works).
I did so myself once and I think it was possible to get a connection utilize quotes,
but I do not remember which ones in what way.
Could have been like
sqlplus "sapsr3/admin@1234"
but not very sure any more.
My be toy around with this, but more easy is to use brtools and change the
password to contain only valid oracle letters.
The problem with "@" is, that it delimits the SQLNET Connect identifier.
Volker
Oh, and for executing brtools, do not provide a user at all or only "-u /"
This should do a sysdba connect.
Edited by: Volker Borowski on Jan 30, 2012 7:25 PM

Login page user name and password for Oracle Database

Hi,
I created a login.jsp page with username,password and a submit button. How can I validate this username and password from my Oracle database username and password?
I am using NetBeans5.5 with Tomcat5.5.17. Right now I have hardcoded username and password in my persistence.xml.
Anyhelp?

Thnx BalusC for ur reply. Let me explain my issue.
I have created a login page. and user is able to enter user name and passowrd on this page. User is supposed to press a 'submit' button when user enters username and password to connect to database. What should I write in 'submit' button's action to let user allow to proceed if username and password are correct i.e. username and password of my oracle database. (usename=scott and passowrd=tiger).
plz help.

PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

User Name and Password for Cisco Prime Infrastructure 2.1

Hi all:
I am stuck at the login page of Cisco Prime Infrastructure 2.1.
I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
Thanks!
tangsuan

Hi Tangsuan,
Following is the documented procedure for password recovery..
In order to modify the GUI root user password, you will need to login to the NCS CLI
as an admin user, and enter the command
"ncs password root password <new password>" (without the quotes)
This should set the web interface root user password :
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
If you have lost your CLI password , try the default logging that is ,
CLI user is admin and not root, so please try logging in as admin with
the password that was set during setup. If that does not work , you need
the install disk that came with the appliance to recover that password.
Follow these steps:
Recovering a Lost Admin Password
If you lose or forget the admin password for NCS appliance, follow these steps.
Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
System Welcome screen appears:
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
             Welcome to Cisco Prime Network Control System
To boot from hard disk, press <Enter>.
Available boot options:
   [1] Network Control System Installation (Keyboard/Monitor)
   [2] Network Control System Installation (Serial Console)
   [3] Recover administrator password. (Keyboard/Monitor)
   [4] Recover administrator password. (Serial Console)
<Enter> Boot existing OS from Hard Disk.
Enter boot option and press <return>.
boot:
Step 2 Select the desired recovery option, 3 or 4, depending on how you
are connected to the appliance and then follow the prompts.
Thanks-
Afroz
***Ratings Encourages Contributors ****

EBS 7.3 "Could not authenticate this user name and password, try again"

I have just install Sun StorEdge Enterprise Backup Software 7.3 on a new Solaris 10 (06/06) system. I have installed the following packages with no errors: SUNWebsc (Client), SUNWebsn (Storage Node), SUNWebss (Server), SUNWebsm (Man pages) and SUNWebsg (Console).
I have executed the �nsraddadmin� command for both root and administrator.
I start the web browser with http://<hostname>:9000 and the java software loads with no errors. But when I try to login for the first time with administrator/administrator, I get the follow error:
ERROR: Could not authenticate this user name and password, try again�

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

Time Capsule won't accept my user name and password for access - Help!

Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.

Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers!

PL/SQL Function to check user name and password

Hi,
I am new to PL/SQL. I have a table that stores user name and password. I want to write a PL/SQL function that checks if the entered user name and password is correct, by validation against the values in the table... Can someone help me with the code? Both user name and password is varchar2

First of all, I believe you mean a procedure that would check the application username and password. Fot, if you mean a PL/SQL procedure, that runs in the database, and that means it has to be executed after the client application is connected to the database.
Maybe you need a procedure like this:
procedure check_pass(p_user varchar2, p_pass varchar2) is
pragma autonomous_transaction;
v_passwd varchar2(200);
begin
select passwd into v_passwd
from password_table
where user_name=p_user;
if v_passwd!=p_pass then
update password_table set
last_unsucc_logon=sysdate
,unsucc_logon_n=nvl(unsucc_logon_n,0)+1
where user_name=p_user;
commit;
raise_application_error(-20101,'Invalid username/password!');
end if;
exception
when no_data_found then
raise_application_error(-20101,'Invalid username/password!');
end;
Study this piece of code and see if this will do.

AppleScript: Waiting for a user to enter user name and password

I'm currently working on an AppleScript designed to automate binding a computer to Active Directory and another script to install a login certificate. While you can create a UNIX shell script for the Active Directory binding, I found that you have to have your user name and password in the script itself and this system will be deployed by multiple people.
So instead I'm doing an GUI Automation AppleScript of Directory Utility. What I'd like to do is have the script to wait for the admin user (who will be remoting in by ARD) to enter their Network user and password, click okay and then continue the script to quit the program and then run a self-destruct (which I'd also appreciate any advice about doing in AppleScript)
Here's the script so far, which I've set up successfully:
activate application "Directory Utility"
tell application "System Events"
click text field 1 of row 1 of table 1 of scroll area 1 of group 1 of group 1 of window "Directory Utility" of application process "Directory Utility"
click button 1 of group 1 of group 1 of window "Directory Utility" of application process "Directory Utility"
click text field 2 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "EXAMPLE.COMPANY.com"
click UI element 3 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click radio button "Administrative" of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click checkbox "Allow administration by:" of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 1 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExamplePS NA"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 2 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleNA"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 3 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleNATemps"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 4 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleTeam 1"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 5 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleTeam 2"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 6 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleTeam 3"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 7 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleDesktop Admins"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 8 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleDomain Admins"
click button "Bind…" of sheet 1 of window "Directory Utility" of application process "Directory Utility
<<WAIT LINE HERE FOR NETWORK ADMIN AND AND PASS, THEN USER WILL CLICK OKAY, THEN CONTINUE SCRIPT>>
<<QUIT ACTIVE DIRECTORY>>
<<SELF-DESTRUCT>>
end tell
It isn't a real command prompt like if you're changing System Preferences or something. It's a specialized prompt specifically for Directory Utility. However, I do need to know how to make AppleScript wait for a password for a standard Password Prompt for adding a certificate to the login keychain through Keychain Access. I've also done pretty much the same thing as above for that script.
Any tips would be GREATLY appreciated.

Yeah, I know GUI Scripting is not the best way, but I couldn't find a successful variable system for the following script. The other issue is that I'd prefer to send this by ARD and have ARD ask for a User Name and Password, but I've found there's no way to do that. Then again, I can't send the AppleScript purely remotely either.
What I mean by self-destruct is simply I only want the Active Directory binding script to run once upon login to the primary admin user and then delete itself so it doesn't get run again. The login certificate script I want to run once on each new user who logs in (so I'll likely be putting it in the "User Template") and then delete itself so it doesn't run the next time they log in. I can't figure out any way to hit those buttons through a shell script.
Here's the original UNIX shell script: (This is what I'm using temporarily until I figure out a solution that doesn't require my user name and password to be embedded)
#! /bin/bash
MACNAME=$(scutil --get ComputerName)
dsconfigad -add "CORP.DOMAIN.NET" \
-username USER \
-password PASS \
-computer $MACNAME \
-mobile disable \
-mobileconfirm disable \
-localhome enable \
-useuncpath enable \
-shell /bin/bash \
-ou OU=Macs,CN=Computers,DC=corp,DC=DOMAIN,DC=net \
-force \
-localpassword "PASSWORD" \
-groups "GROUPS"
And here is the Certificate Installation AppleScript
activate application "Keychain Access"
tell application "Finder" to open POSIX file "/FolderName/Certificate.crt"
delay (3)
tell application "System Events" to tell process "Keychain Access"
click button "Add" of window "Add Certificates"
click button "Always Trust" of group 3 of sheet 1 of window "Keychain Access"
end tell
Thanks for the help. I really appreciate it. This is a rather new field for me and most of my knowledge comes from Google Searches and about a billion tabs trying to find answers.

Tiger to Leopard transition- user name and password not working. plz help!

Hi all. Last year I purchased a MacBook Pro with Tiger OSX. Anyways I wanted to switch to leopard, so I did. Now when I want to install updates, as usual it requires my user name and password. But after I installed leopard, my old user name and password does not work (my login name does not even show up in the box anymore). I can not install any new software on my computer because of this so called "new password." Any assistance would be greatly appreciated because this is very frustrating since I just purchased an iPhone and I can't sync it because I need the new version of itunes.

can you log in at all as another user? if not activate root and log in as root using [these instructions|http://support.apple.com/kb/TS1278]. then look in the /Users folder at the top level of the hard drive. do you see the home directory with your old username there? post back with what you find.

V890 Console login - user name and passwd

Similar Messages

Maybe you are looking for