V9 error and touchpad and charger not working

Hi all,
Since 2 days my touchpad and my charger of my laptop(hp pavilion g6) aren't working anymore. When i start google chrome i automatically go to the website v9.com (which is a virus, according to google). Does anybody got suggestions on how I can solve this issue?
I tried entering bios and resetting the default data. That helped for 1 day, but now i have the same problem again, and resetting doesn't help anymore.
I would be really glad with any tips.

Hi all,
Since 2 days my touchpad and my charger of my laptop(hp pavilion g6) aren't working anymore. When i start google chrome i automatically go to the website v9.com (which is a virus, according to google). Does anybody got suggestions on how I can solve this issue?
I tried entering bios and resetting the default data. That helped for 1 day, but now i have the same problem again, and resetting doesn't help anymore.
I would be really glad with any tips

Similar Messages

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • OIM after BP12 patch system error and logging not working

    Hi,
    I am using Weblogic 10.3.2 and need to install OIM. I have installed the 9.1.0.1 and then the patchset to 9.1.0.2. Then I have installed the bundle patch BP07 and everything was ok.
    Finally I have installed the BP12: now i am unable to log in the OIM admin panel ( system error ) and i cannot connect with the design console (NullPointerException). The worst part is that OIM does not write a log file anymore, so i can't determine what's wrong. What should i do?
    thx in advance

    no errors, everything fine. The webapps (xellerate and nexaweb) are started normally.
    As an additional information, i just tried to revert to BP07, it still doesn't work.

  • Hp 2000 laptop ctrl+alt+delete disk read error and f11 not working.

    Im having a problem. I have HP 2000 laptop and i recently download a antivirus thaeme asked me to resgate the conputer so i disso and i started to get this disk read error saying ctrl+alt+delete to restarem and agente i do it restart and i get the same error again. So i tries f11 to recover the laptop when i press f11 it just shown the hp logo on the middle of the screen and f11 sustém recovery at the bottom left corner and it just stay at that screen and it dosent go antes further. Anyone help?

    Hi
    Try to run the tests below
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443317
    If it passes then call Hp and let them know that the F11 recovery is not working and you would like to get recovery Disks they will send you the OS disks so that you can reinstall the OS back on to your unit.
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Crashing, disk errors and iPod not working!

    For a while now my mac keeps on crashing. It's done so in a variety of ways, the most common being the screen becomes dulled with the message on top saying I need to restart my computer. I also had a weird occassion when the screen went purple/pink and grey and gradually changed and got darker until it eventually switched itself off.
    On different occassions I have verified the permissions. Sometimes there are no errors. Often there are errors but with different programs everytime. I always repair these errors.
    Yesterday I verified my disk and there was an error. When I went to repair it using my Install disk it said the error could not be repaired.
    My iPod does not properly sync with my computer either.
    About 2 months ago I had to do an Archive and Install after a lot of my 3rd party programs simply failed to load.
    I don't have a clue what to do, so any help would be greatly appreciated. My computer is still within its 1year warranty but I read that if its a software problem they'll charge me for fixing it.
    Many Thanks.

    Each time I have had to restart my computer I have copied the error report that appears once it is up and running again.
    Below is the most recent of those reports:
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000011 PC=0x000000000006644C
    Latest crash info for cpu 0:
    Exception state (sv=0x43900C80)
    PC=0x0006644C; MSR=0x00009030; DAR=0x00000011; DSISR=0x40000000; LR=0x000663D8; R1=0x220F3C90; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x220F3CB0 0x000704A8 0x00062584 0x000A845C 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x43900C80)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x37EEE280)
    PC=0x90003768; MSR=0x0200F030; DAR=0x3000000C; DSISR=0x40000000; LR=0x90003510; R1=0xBFFFDF50; XCP=0x0000000C (0x300 - Data access)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x43900C80)
    PC=0x0006644C; MSR=0x00009030; DAR=0x00000011; DSISR=0x40000000; LR=0x000663D8; R1=0x220F3C90; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x220F3CB0 0x000704A8 0x00062584 0x000A845C 0x000AB980
    Exception state (sv=0x37EEE280)
    PC=0x90003768; MSR=0x0200F030; DAR=0x3000000C; DSISR=0x40000000; LR=0x90003510; R1=0xBFFFDF50; XCP=0x0000000C (0x300 - Data access)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerBook6,7, BootROM 4.9.3f0, 1 processors, PowerPC G4 (1.5), 1.42 GHz, 1.5 GB
    Graphics: ATI Mobility Radeon 9550, ATY,M12, AGP, 32 MB
    Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
    Memory Module: DIMM1/J7, 1 GB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: Jump, V.92, Version 1.0
    Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: pci106b,4318, sppci_othernetwork, SLOT-B
    Parallel ATA Device: DV-W28SLA
    Parallel ATA Device: TOSHIBA MK6025GAS, 55.89 GB
    USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
    I hope this helps.
    Cheers.

  • IPod Touch 5 home button, power button and charging not working!!

    I have an iPod Touch 5 I got last year for Christmas, so it's about an year old. The home button has not been working recently so I tried everything to fix it but nothing worked. We took it to places to get it fixed but it costed a fortune that I would have bought a new iPod Touch instead. I just used the Assistive Touch instead. Then today I was using my iPod Touch and I turned it off. About a minute later I went to get my iPod Touch and used it again and threw it on the bed because that's what I always do and it never breaks. Then a few minutes later, I got my iPod Touch from my bed and I tried to turn it on but it wouldn't budge. Then I remembered it had low battery so it must have shut down because it had no more battery power left. I charged my iPod Touch and tried to turn it on a again but i wouldn't. It would normally turn on and show the Apple Logo and go directly to the lock screen but it just stayed black. I searched up how to fix this but the only way to turn it back on is doing something with the home button but I couldn't since it was broken. I tried to find computer but they were all occupied and the only that wan't occupied was a Chromebook but it my USB couldn't fit in because it was too big. I try to find other ways but there was nothing that could work. I think my iPod Touch isn't charging because whenever I charge my iPod and it has no battery power left, it would usually turn on by itself. I really don't want to go out and fix my iPod at a store because it'll cost a fortune. Please help!! Thank you

    Turn on without Home/Power Button
    You need a computer with iTunes which rules out a Chromebook

  • Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone"  It worked before but now it doesn't...I don't think I should have to buy a new one...

    since I upgraded to the new operating system my charger no longer works...
    It says"this cable or accessory is not certified and may not work reliably with this iPhone"

    Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
    After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
    Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

  • HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

    Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
    When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
    Anyone else have this issue after they upgraded the iOS system?
    Thanks,

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Powerbook g4 charger not working, changed fuse and still no luck

    I've got a powerbook g4 laptop. A few nights ago the charger just stopped working. The wire is totally intact and we have tried changing the fuse within the plug but it keeps fusing out and still not working. I really don't want to buy a new charger as I've bought at least 6 over the last 5 years (through the wire fraying) AND replaced the battery once already. Is there anything I can do to fix it?
    Thanks!

    You must be remarkably hard on your adapter cords. I packed my Powerbook and adapter up and unpacked them again at least daily for six years and my original adapter is still working fine.
    If the port to which the adapter cord connects in your Powerbook is at all loose or wobbly, your DC-in card is shot, and that may explain why your fuse keeps blowing. If you're in the habit of tripping over your adapter cord, that would explain both the long sequence of ruined adapters and a broken DC-in port/card in the computer.
    Unless you plan to treat your adapter more gently in the future, buying an inexpensive third-party adapter instead of an Apple unit would be a good idea.
    http://eshop.macsales.com/item/Other%20World%20Computing/ACADPTG4/
    Message was edited by: eww

  • Illustrator and photoshop its charging me and its not working..

    illustrator and photoshop its charging me month to month and its not working.. i want to cancel them but i cant because my account says that i have de free vertion but thats not ture.. i´ve been calling and nobody answers the phone. what can i do????

    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

    I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

    you must also use a browser that allows cookies.  try a different browser or download from adobe.com
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • After updating to ios 7.0.6 i keep getting an error message saying "this cable or accessory is not certified and will not work reliably with this iphone" every two minutes and its annoying

    What is up with this error message after updating saying our cables are not reliable?

    Thank you for this suggestion, but the message continues to display every couple of minutes. (e.g. "This cable or accessory is not certified and may not work reliably with this iPhone.)
    Not only is it annoying and concerning...this is draining my battery, as the iPhone keeps waking up to display the message over and over. Like "MartinLegodi" above, I also have no cable or accessory plugged in and only use Apple cable and products when I do.
    It's a disconcerting mystery.

  • My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?

    My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?

    Sounds like a battery failure.  Your phone is under warranty.  Bring it back to Apple

  • Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

    Hi friends.
    Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

    Just download Mavericks (10.9) its free and installed it (Mac App Store)

Maybe you are looking for

  • How can I burn a DVD of an iMovie 13 project using iDVD 7.1.2 version.

    I have a late model iMac which came with iDVD.  I use iMovie to make photo and movie projects and share them to  iDVD to burn DVDs.  I use these often and I love them, specially iDVD. When Mavericks came out I updated and of course it changed iMovie.

  • Add userid to user group in

    The operating system is WINDOWS VISTA on my machine. I successfully installed Oracle 10 R2 10.2.0.3 and upgraded it to 10.2.0.4. I have the following issue after upgrading to 10.2.0.4: From the DOS command prompt as "Run as Administrator" and then di

  • Differences between WLS and WLE

    Can anyone enumerate the differences between weblogic server, and weblogic enterprise? It appears to be a much smaller platform support, and corba/ tuxedo stuff. Is that all? Just trying to nail down some questions as I wait for weblogic sales depart

  • No uninitialized partition for /var but I went on anyways

    In case anyone makes the same mistake as I did and added the old /var volume back into the new 1.1 VM, this is how you fix it if you told it to keep the /var on the root partition: (You can do all of this while the VM is running, at least on VMWare)

  • Bluetooth and headphones

    Can I use my Bluetooth headset and my headphones at the same time for two ppl to listen?