VA01 - Can't confirm order because shipping point is missing

Hello Gurus,
I cannot confirm a sales order in VA01.
Upon confirmation the system brings out the "Incompletion log" with the following message:
Item 100: Missing data: Shipping Point/Receivi
Now, I have checked my company structure and my shipping point ZSP2 is assigned to the plant BER1
The plant itself is maintained in the shipping view of the Customer MD and in the Material MD
When I try to manually add the shipping point at item level in the sales order, the system tells me there is no value for that field.
I understand the item 100 is part of the sales document OR which is the basic Sales Order Document Category I am using to create a sales order.
Can someone explain to me why is that so and what can I do to allocate the shipping point automatically in the sales order?
Please advise
Regards
Chris

For the combination of Shipping Condition from Customer Master, Loading Group from Material Master and delivering plant, shipping point will be determined. 
Check in OVL2 whether you have assigned the shipping point for the above combination.
thanks
G. Lakshmipathi

Similar Messages

  • Sales Order Item Shipping point (VBAP-VSTEL) value in APO table

    Hi,
    I am looking for Sales Order Item Shipping point (VBAP-VSTEL) value in APO.Can I  get this info in APO ?
    This information is not available in table /SAPAPO/SDORD or  /SAPAPO/SDFIELD.
    Basically table /SAPAPO/SDORD is completely blank. Table /SAPAPO/SDFIELD has entry for Sales Order Item but not for VSTEL. Shipping point is there in the Catalog table in ECC and I can see that it is getting imported to APO but why it is not avaibale in SDFIELD table.Any idea ?
    I cheked table /SAPAPO/SHIPPING also for the guid (Item guid) but not found any entry .
    Please help.

    RKS,
    Most data in SCM is not stored in tables, it is stored in LC.  In general, it is not the best idea to use APO for creating custom reports against  transactional data.  You do such reporting in the OLTP, and you use the standard SAP programs to keep these systems in synch.
    Some SD auxiliary data is sometimes stored in /SAPAPO/SD_DOC.and /SAPAPO/SDFIELD.  Check here, you might find something useful.  No guarantees......
    Best regards,
    DB49

  • Shipping point is missing from automatic delivery for external operation

    Hi All,
    I have tried to do one operation vy external processing. All the configuration and master data done. But during the goods receipt for the material from vendor after processing (t code MIGO) system is providing message as "Shipping point is missing from automatic delivery".
    1. In the control key, automatic GR is not there, so from where automatic delivery is coming?
    2. I have maintained the shipping point for the plant as plant in SPRO>LOG Exe> Shipping> Shipping point and goods receiving point determination> Assign good receiving point for In bound deliveries.
    Please provide the solution.
    Thanks
    Krishna

    Dear friend,
    As far as i know:
    1. check out the shipping point assignment to plant : t-code OVXC ;  just in case make sure your shippong point is correct - goto spro->enterprise strucutre->definition->logistics execution->def.,copy,del,check shipping point
    2. make sure your SC (shipping condition) and loading group are correct in the "Shipping point determination";
    also make sure you did GR points assignment correctly (the next item in IMG)
    good luck!

  • I can't load firefox because it says "Profile Missing- Your Firefox profile cannot be loaded. It may be missing or inaccessible." Can't delete either. Help?

    I have a Mac and I can't open firefox because it says "Profile Missing-Your Firefox profile cannot be loaded. It may be missing or inaccessible." Then I tried to delete it by moving it to trash and it says it cannot be moved to the trash.

    Create a new profile to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Sales order-different shipping points

    Hi friends,
    When I do a delivery after creating a new sales order with one line item, I am encountering an error which says that delivery cannot be done as delivery split becasue of dfferent points. I have even checked in OVL2 the shipping, loading group and plant and saved the same but still iam encountering the problem.Even shipping point is assigned to comp.code.Give me a solution for this.
    Thanks
    Swamy

    hi,
    i think this problem is because of copying plant,shipping point,loading point,loading group etc.you have to carefully check that not more than one
    of this is prevailing in your settings.kindly delete the unwanted ones(which must have come along with during copying).
    The second possiblity is that you check for the order combination field status
    and set it accordingly.
    I hope these should help you to solve your problem.

  • Problem installing iTunes update: "Can't start" iTunes "because MSVCR80.dll is missing" from my computer. Please help!

    Please help! I tried to update my iTunes as prompted, but it did not install correctly, and now I am getting the following message and do not know how to fix the problem: 
    "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling this program to fix the problem."
    Another window gives me this message:
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)"
    BUT I AM AFRAID  TO REINSTALL iTUNES and lose my library! Would greatly appreciate learning how to resolve this porblem without losing my music!
    Cheers!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Can't start IASPT because ApacheCore.dll is missing

    I installed SOA 10g on Windows 7 64-bit (supports 32 bit) and got this error while starting up the opmn either ApacheCore.dll is existing in
    $ORACLE_HOME/Apache/Apache directory.
    iaspt.exe - System Error
    The program can't start because ApacheCore.dll is missing from your computer. Try reinstalling the program to fix this problem.
    OK
    Can anyone help to troubleshoot this issue?
    Thanks in advance-
    ntdp
    Edited by: user13103787 on Sep 13, 2010 10:00 AM
    Edited by: user13103787 on Sep 13, 2010 10:10 AM

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Can't open files because ID5.5 is missing

    Was happily creating ID files in 5.5 and had a computer disaster. New computer, new install -- up to ID5.0. But ID5.5 disc won't install and InDesign 5.0 won't open any of my old files because of a list of missing plugins. How can I get a new install of ID5.5 without spending more thousands? I am retired now and need ID for freelance work.

    If you have a serial number you can download 5.5 form this link:
    Direct Download All Official Adobe CS5.5 Free Trials
    http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
    Follow instructions exactly
    And if you haven't serial number download a trial version, then save your documents as IDML and open in indesign cs5

  • Sales office to shipping point in VA01

    Hello,
    We've tried to create a new Sales Organization with a new Sales Office in SAP system, but got following problem in VA01:
    In VA01 first screen you can choose them ok. But in sales order items Shipping Point/Receiving Point is automatically sales organization and NOT the sales office. You can't change the shipping point manually either, VA01 says "Shipping point is not defined for this transaction".
    We've tried SPRO configuration but haven't found anything that helps, any ideas?
    Thanks in advance,
    Tom

    Dear Tom,
         I dont think the new sales organization is the cause of your issue to determine shipping point in VA01 line items.
    Because Neighter Sales organization nor sales office doesnt have any direct assignemnt with shipping Point.
    Shipping Point determination is based on :
    Shipping Conditions ( which will be copied either from  Sales doc type or Customer master of the sold to party)
    Loading Group ( will be taken from MMR-Sales/Plant general tab)
    Delivering Plant ( taken from: Customer Material Info record or Customer Master record / Material Master record) .
    Coming to your issue: as per your post,
    Whether you want the system should determine Shipping Point based on either sales org or sales office? Ist so-Please confirm. But in std its not provided.

  • Shipping point at Item Level of a Sales Order

    Dear Gurus,
    Can anyone explain to me step by step how can I copy:
    1- The shipping point
    2- The route
    At Item level of a Sales Order in VA01
    Many thanks
    Regards
    Chris

    Dear Gurus,
    Can anyone explain to me step by step how can I copy:
    1- The shipping point
    2- The route
    At Item level of a Sales Order in VA01
    Many thanks
    Regards
    Chris
    Hi Chris,
    Answer to your Question,
    Please understand that Shipping Point and Route will be automatically determined based on the configuration settings we make. However we can even override the values manually in sales order screen (Va01 / Va02). See below the config settings to be made for  Shipping point and Route:
    1. Shipping Point.
    Based on the combination of below three parameters, Shipping Point will automatically populate while creating a Sale order. (VA01)
              Shipping Condition
              Loading Group
              Delivering Plant
    SPRO- Logistics Exceution - Shipping - Basic Shipping Functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points
    2. Route
    Based on the following Four factors from configuration:
    Departure Zone of Shipping Point
    Destination Zone of Customer (Shipto)
    Shipping Condition from Customer master.
    Transportation Group from Material Master.
    Hope this Solves your Issue.
    Regards,
    VBASHA

  • Shipping point was not determine in the order with material determination.

    Hi,
    I´m using material determination for my sales order, and i need to determine the Shipping point with storage location configuration. So when I add the material number, the quantity and the storage location the material determination runs and in the second line determined the shipping point it is not filled. Any body knows how can I fix this problem?
    Best Regards

    Hi
    The shipping point will be determined on the basis of shipping condition, loading group and the delivering plant.
    The storage location dependent shipping point determination is used only in delivery documents and not in sales orders (Assign Shipping Points According to Storage Location).
    To activate this you must first Define Rule for Determination of Shipping Point, wherein you can assign the rule to the delivery document only and not to the sales order.
    If you say that you are getting the shipping point determined based on the number of the material, the quantity and the storage location entered(though it is not) then here note that you are entering the storage location only to the material entered and not to the material determined. When the system determine the alternate material then the shipping point will be determined on the basis of shipping condition, loading group and the delivering plant as per SAP standard process.
    Try by entering the storage location to the material determined and check whether you can get the shipping point or not and let the forum know the result.
    Hope this helps you.
    Regards
    Rajkumar K

  • Shipping point in sales order

    Hi ll,
    I have crearted a sales order, and i want to change the shipping point, but each time i change the shipping point it keeps going back to its original shipping point.  how can i change this?
    were is the shipping point held?

    Dear SAPing SAP,
    you are not able to change the shipping point in the sales order due to shipping point determination settings in OVL2 transaction.
    If you want to change the shipping point manually in the sales order you need to maintain that shipping point as manual shipping point in the OVL2 transactuion.
    Please go to OVL2 transaction here you enter the shipping point which you want to enter manually in the sales order ,in the colomun Manual shipping point -MShPt with the combination of
    Shipping conditions (Customer master)Loading group(Material master)Plant-->Proposed shipping point + MShPt.
    Now you can able to enter the shipping point manually in the sales order system will accept.
    I hope it will help you,
    Regards,
    Murali.

  • Missing shipping point while saving sales order

    hi all,
           friends i am creating a sales order(VA01). when i use incompletion log. it shows shipping point is missing . when i go to fill shipping point , it shows no any data. i have checked customer and material,and also done shipping point determination . But it still shows shipping point missing in sales order .
    so plz help me to solve this problem .
    regards

    First a plant should be determined in the sales order.for the plant to be determined in the sales order you shoud maintain aplant in the customer master or material master or in the customer material information record.
    2nd thing is you must do shipping point determination in logistics execution under shipping assign shipping point,receiving point determination.for that shipping point is assigned to plant ,loading group,and shipping condions and the shipping point you want to assign. If you these two things then the shipping p[oint wiil be determined in the sales order.
    Regards
    Biju

  • Blank shipping point in return order

    Hi all,
    I have a scenario where we are NOT going to get the return goods to my plant but want to create return order and Invoice with out delivery.
    Since we are not receiving goods to our location, Is the right thing to do on Return order is not to have shipping point/S.loc and route?       
    It is actually copying the S.Loc value from Invoice and thinking about blanking out, waiting for your opinion.
    Thank you
    Chris

    Hi,
    So just wanted to know from the process the perspective, is it correct to have Shipping point and Storage location on order when there is no delivery getting created.
    If there is no delivery and sales order have shipping point and storage location then it is ok.
    If you don't want and removed then it will appear in in completion log then you have to remove it from incomplete log also
    Kapil

  • Determine sales price with shipping point

    Hi Experts,
    We are trying to use shipping point as a key field (with sales org. distribution channel and ship-to party together) to determine the sales price. we have created a condition table with the above key fields, and maintained the relevant setting (access sequence, condition type and pricing procedure).
    There is an error message in the sales order pricing analysis ("access not made" in the shipping point field).
    In the access sequence, we found that the shipping point field's document structure is KOMK.
    Can we put to item level field in the condition table and access sequence? is it possible??
    regards
    garima.

    Hi.
    Structure KOMK refers to header of the sales order, but shipping point of course is on item level.
    You have to do some settings to reach your goal, it is possible.
    Step 1
    Append structure KOMP. Do this by changing through SE11 the table KOMPAZ.
    This is the include for structure KOMP.
    Add a component e.g. ZZVSTEL with component type VSTEL.
    Save, activate.
    If you want to make more points, assign search help H_TVST to the component.
    Ask a programmer if you don't understand this part.
    Step 2
    Change user exit MV45AFZZ. Say there that field ZVSTEL should be filled with information from your shipping point.
    Do this under part FORM USEREXIT_PRICING_PREPARE_TKOMP.
    The coding should be like tkomp-zzvstel = vbap-vstel.
    Save, generate.
    Step 3
    Make a new table as you did before, but first maintain your new field in Condition: allowed fields.
    When you create your new table you will see you have two shipping points.
    With the button technical view you can check which one ZZVSTEL or VSTEL.
    Step 4
    Finish with the steps you did before. That was ok.
    regards
    Vivek.

Maybe you are looking for