VA01 Incompletion Log-WBS

Dear All
I have created incompletion log for WBS. When the WBS and plant field is blank, i am getting log as enter WBS and Enter plant.
If the plant field is filled and the WBS field is blank mean system saying document as complete. But i want log as WBS as incomplete.
Kindly guide me.
Shobana

Hi,
This WBS element will create in Project System module which is under specific Plant.
Hope there might some link with the plant while creating WBS master data ( table :PRPS)
check if you have maintained the filed in item incompletion log-
for standard item -
table name: VBAP
field name: PS_PSP_PNR
( this PS_PSP_PNR data copied from table PRPS)
and check the "warning" check box has to mark.
status group- 04.
plz check and revert.
Edited by: RMD on Apr 11, 2008 2:54 PM

Similar Messages

User exit to update the incompletion log in sales order for pricing error

Hi experts,
I have to check the some mandotory pricing conditions in sales order, if that conditions are not exist in sales order then i need to show the information message as well as i need to update it in incompletion log of sales order. (incopletion log we can see on menu bar 'EDIT' or ctrl+F8 on main screen of VA01). So that user can save the sales order but it will be in incomplete status.
I have completed it upto showing the information message using user exit 'MV45AFZZ', but after this i don't know how to update it in incompletion log of sales order for pricing. I tried to update in tables VBUK-UVPRS, but i am not getting the desired result.
Please anyone can tell me how to update it. In which user exit i can update the incompletion log.
Thanks and Regards,
Vicky.

Hi Vinod,
I am sending you my code please check it,
   if TKOMK-SPART = 10.
    if XKOMV is not INITIAL.
      clear v_JEXP.
    READ TABLE XKOMV with key kschl = 'JEXP'.
    if sy-subrc = 0.
      check XKOMV-kwert = 0.
      message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
      v_JEXP = 'X'.
    else.
      message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
      v_JEXP = 'X'.
    endif.
    if v_JEXP = 'X'.
XVBUV-MANDT = sy-mandt.
XVBUV-POSNR = '000010'.
XVBUV-TBNAM = 'VBAP'.
XVBUV-FDNAM = 'PRSOK'.
XVBUV-FEHGR = 20.
XVBUV-STATG = '06'.
XVBUV-FCODE = 'PKON'.
XVBUV-SORTF = 9999.
XVBUV-LFDNR = 0000.
XVBUV-UPDKZ = 'I'.
append XVBUV.
    endif.
endif.
endif.
Please suggest something to solve this.
Thanks and Regards,
Vicky.

Can text messages in the incompletion log be found in any table?

We need to store and review the text messages found in the online incompletion log. Does anyone know if these are stored in a table? Or if they are always redetermined upon VA01 or VA02 transactions, does anyone know at what point in what program this happens if we need to build our own custom table to capture the messages?

The incompletion log table is VBUV - Sales Document: Incompletion Log
I think the table is filled in one of the following:
> Function module - RV_CHECK_DOCUMENT_INPUT
> Include - LV45FFUV: FORM FEHLER_BESTIMMEN
I hope this helps.
Gerard
P.s. Also look for structure VBUV_TAB as I think XVBUV comes for here.
Edited by: Gerard Magorrian on Oct 1, 2010 9:04 PM

EDI1 Message on incomplete log is not V1 249

This question is about the message withing the incompletion log.....
When we see the VA01/VA02 incompletion log is says "Expected Price Missing" We were expecting V1 249 "Customer expected price differs from net price for item &." Debugging the formula shows that V1 249 is being populated to xkomv-fxmsg. Has anyone encountered this? Does anyone who uses EDI1 for reporting differences between net price and customer expected price normally get "Customer expected price differs from net price for item &." V1 249 on incomplete log. when in VA01/VA02?
No problems encountered using V.25 and the release works fine, so no problems there.
We are also able to correct the price difference manually within VA01/VA02, that works fine.
The only question we have is why Message V1 249 does not display incomplete log. It has "Expected Price Missing instead.
What does everyone else encounter on VA01/VA02 incomplete log at their sites when using this functionality?
Ian

It seems that you're misunderstanding the purpose of the incompletion log. Incompletion procedure and log is meant only to inform the user that some required data is missing. It doesn't provide any further analysis as to why it is missing or anything like that. Therefore the message will always look like '<...> is missing'; sometimes even just a field name will be mentioned.
The code behind the incompletion procedure is a simple comparison blank/not blank. Naturally, some other functional code may precede it, but it's totally irrelevant to the incompletion log.

Incompletion log Field VBAP POSEX is not defind in incompltion procedure ZA

Hi Friends,
Need some help on this issue.
We have some orders created in production, and when ever we go to VA02-> enter-> it pops up with the below error message." Field VBAP POSEX is not defined in incompletion procedure ZA ".
I already checked the incompletion procuredue and the field VBAP-POSEX (Purchase order item) was not at all defiend.
It gives the incompletion log for only certain line items in the sales order and not for all. There are already few items delivered and we cannot reject the order to create a new one.
I reveiwed this note "1497255 - Incompletion for PO item number (vbap-posex)" but it states it is for specifically for intercompnay orders.
Our case is standard trade order. It woud be really great anyone has come across the same situation so that i can seek for help..
Thank you so much!!
Best Regards,
Ram

Hi Lakshmipathi,
Firstly, thanks for the response.
Yes.. I did checked... the field VBAP-POSEX was not maintained at item level though.
The same item in other order does not have this problem and it is still open.
This is specific to only very few orders, namely 4 or 5 orders but not with others.
Moreover, these materils are widely used among other company codes or sales org but no issues what so ever.
This one appears to be a peculiar case. Thanks for your time and suggestions for looking it over.
Thank you..
Best Regards,
Ram

Function module to add record into incompletion log of creating sale order

Hi SD Experts,
Do you know any function module / class to add record a into incompletion log procedure of creating / changing sale order process? We can do it through configuration OVA2 but I need to add more condition before adding to this table.
Thanks,
Duy

Hi,
Refer to The SDN Post : [user exit to update the incompletion log in sales order for pricing error |Re: user exit to update the incompletion log in sales order for pricing error].
Limitation : While creating Sales order, this works only for document type with external number range as the code required for updating XVBUV require Sales Order Number.
Regards
Vinod

Incompletion Log V50UC EXCTR inconsistency at Delivery header and Item lev

Hello Experts
Incompletion Log V50UC EXCTR inconsistency at Delivery header and Item lev
This fields and structure is defined both at header and Item Incompletion procedure .
But at Header level , the field is getting removed , but not at Item level
V50UC- EXCTR.
Can you let me know what to do about this inconsistency / any SAP Note etc .
REgards
Rohit

Hello
This Incompletion log is related to Foreign Trade.
Check maintain required foreign trade data at Item
or If foreign trade is not active for your this business process..Check your config for Incompletion procedure for foreign trade by use TCode VI29.
I hope this suffice your requirment.
Thanks & Regards
JP

Foreign Trade Data Incompletion Log

If a billing document is missing foreign trade data required for the incompletion procedure should this prevent the posting to accounting?
Or is the incompleted data only required for intrastat reporting?
Thanks
Caroline Tubby

Hi tubby
Go to VF02->item data->foreign trade tab . there click on incompletion log icon whatever data comes fill those data and next go to header data->foreign trade data tab ,there click on incompletion log icon whatever data comes fill those data and then save the billing document and then forward it to FI
Regards
Srinath

Sales BOM and Incompletion Log

Hi SAP experts.
We are on ECC 5.0. Wer are exploding sales BOM in sales orders. I have a requirement that if for certain reason a BOM fails to explode for a particular line item then that item should be go an incomletion log. I was able to select field VBAP-STKEY (BOM ORIGIN) in incompletion procedure at the item category level.
However the problem i have with this is even if the BOM explodes the order is set to incomplete once I add VBAP-STKEY to the incompletion procedure. I find the VBAPSTKEY also gets a value of 5 in the table however the order is stil shown as incomplete. I am not sure if this is a bug.
If it is not possible to control this via incompletion log is there a way to ensure that if a sales BOM does not explode in sales order the system should not create delivery for that line item.
Any response will be highly appreciated.
Thanks
Praful

Dear Praful
You can try with this.
Go to OVA2, block "Sales-Item" and double click on "Procedures". Again block on "Standard Item" and double click on "Fields". There maintain as follows:-
Table::Fld name::::::::Description:::::::::Screen:::Status
VBAP:::UEPOS:::::::Higher-level item:::POST::::::04
thanks
G. Lakshmipathi

Custom field in incompletion log

Hi All,
I have added a new custom field (custom field from VBAK) in VA31/VA32 Additional data A tab .
My requirement is : This custom field should appear in the incompletion log ONLY based on some condition.
So to add this custom field into incompletion log, configuration is done through
SPRO->basic functions->Log of Incomplete items->Define incompleteness procedure .
query:
How to proceed further to handle the incompletion log conditionally .
so that only for specific document type and only for specific sold-to-party this field should appear in incompletion log.
Could you please help me if anyone have come across such scenario.
Thank you.
Regards,
Sangita

Sangita,
You will not be able handle incompletion log conditionally ONLY just by adding the required custom field in the Incompletion log procedure. Along with the right customization you also have to write the custom logic in the one of the MV45A* userexits populating a record with the sutom field in the runtime structure XVBUV.
Hope this helps.
Thanks
Arjun

How to restrict inbound delivery creation by incomplete log

Guru's
I have a requirement of not to create an Inbound delivery if the filed in the "means of trans id " in the delivery header is 'BLANK".If i create an incomplete log for the field LIKP-TRAID (Warning message enabled) for Delivery header in transcation OVA2 .Now if i create an inbound delivery with "means of trans id " BLANK .It is giving only warning message it is not stopping me from creating an Inbound delivery .
Can you please let me know whether we can restrict creation of inbound delivery.
Thanks

Try through user exit,If system does not find the means of trans id then syem stops to crete inbound delivery.Chcek this user exit V50Q0001 with your ABAPer it may help you.

Incompletion log Profitability Segment at item level in the Sales Order

Hello Sapians,
We recently activated the "Sales Order value flow to COPA". When we create the Sales Orders the Profitability segment for the item is getting picked up automatically and have no issue in saving the Sales Order.
But when we edit the Sales Order and then try to save it, Sales Order has incompletion log which is leading to Profitability segment in the item level.
When I click the little box in Sales Order Item > Account Assignment tab> Profitability Segment forward arrow--> "continue" or "derivation" in the populated screen, then the Forward arrow in the profitability segment is deriving the characteristics, then system lets us to save the Sales order with out any incompletion log.
I checked the OSS notes 114520, in this OSS note, my sitiuation is exactly first point but could not get any clue how to resolve automatically.
Why it is happening only when we edit the Sales Order? How to update bulk of Sales Order automatically?
Any inputs?
Thank you.

Hi
Since you have activated the Sales order flow to COPA, any change in the sales order triggers a Prof Segment redetermination.... Thats why you are able to save it once you redetermine the Prof Segment....
Ideally, if no Chars like Plant/Org Elements/etc are changed - It need not trigger the Prof Segment redetermination...
Refer Note 729381 - When is a profitability segment supposed to be determined?.... With ref to this note, raise an OSS msg to SAP and check if it is possible to avoid the redetermination of PSG as long as none of the relevant chars are changed in the sales order....
There is a similar issue in MTO where by, even if you change the Header text of sales order, it triggers the Sales order cost estimate.... SAP provided a note to stop this... Note 1548608 & 1260868.... Your case is similar to this.... Raise an OSS to SAP and ask them if they can provide such a note for your case.... I feel, it should be possible for SAP to give this!
br, Ajay M

Incompletion log in delivery for foreign trade data

Hi all,
I am doing export delivery and i want to put foreign trade date as in incompletion log.
This log i want to do only for export document types (zex) which i have created separately.
Delivery header > foreign trade / custom >geography >
1. Export customs office
2. Office of destination
Delivery Item > Foreign trade/Custom > Origin / Destination >
3. Country of origin
4. Dispatch country
I want to make those 4 field as mandatory while doing export order. But these fields are in the EIPO table which is not there in the delivery incompletion log.
Can anyone please help me how to solve this issue.
Thanks in advance,
Babs

Hi Babs,
the foreign trade data can't be included into the incompletion log.
You have to create both incompletion log in T.code VI29.
Then you have to assign this logs to your country in VI49.
In standart SAP it's not possible to make this only for one document typ, this checks will be done for all foreign trade data.
Regards
William

Function to return incompleteness log of Delivery

Hello,
We use the function BAPI_OUTB_DELIVERY_CREATE_SLS to automatically create deliveries for our mobile devices. On occasion, the log "Batches / valuation types not completely allocated" is reported for items with incomplete or no batch splits at posting. The problem isn't the materials because a new order with the same materials and customer can be created and posted without any errors. There are also no reports of this occurring when deliveries are created manually.
Does anyone know why this (sometimes) happens when using function BAPI_OUTB_DELIVERY_CREATE_SLS? If no, is there a function which can return the incompleteness log of a given delivery, so we can refresh an item batch split if it fails?
Nicholas
Edited by: Nicholas Archer on Feb 6, 2012 4:06 PM

Shiva,
Thanks for your response. This note has already been implemented in out system (ECC 6.0, appl 600 level 018).
Do you have any other suggestions?
Nicholas

How do I add PO line item to incomplete log procedure

Hi SD Experts,
How do I add PO line item to incomplete log procedure for VA02? Is that possible through configuration and/or code? if it is done by code, what userexit or BAdI I need to implement?
Thanks,
Duy

Hi Duy,
You need to go to SD > Basic functions > log of incomplete items > define incomplete procedure > select group A (sales header) > procedures > select 11 (Sales order) > fields tab and add PO number incompletion fields as below:
table---field namedescriptionscreen--status--warning
VBKD---BSTKDPO number-KBES -
0----
X
Finally, you should assign your incompletion procedures to your sales doc. typ.
I hope these will work.
Regards,

VA01 Incompletion Log-WBS

Similar Messages

Maybe you are looking for