Va01 MV45AFZZ include error

Hi experts,
I have control ZRE order creation with reference. Already zre order created for given reference no system will through
error msg. i have thrown error msg , but after error msg Flow control: Entry SAPMV45B, R1, RAUF is missing in T185V
error will occur. In T185V table what i have to maintain. Kindly give solution for this.
G.Vendhan

Hi,
take a look to oss-note 819352
Regards
Nicole

Similar Messages

REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.

Hi Experts,
I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
Please help me soon to resolve this issue.
Thanks in advance.
Shreyansh

Hi
Goto main function group include name attributes tab and double click.
once the include is opened, try to activate it. if shows errors then fix.
regards
Shiva

I cant uninstall my itunes off my computer, i have followed instructions and i still have errors, including error 2330 and redundance cyclic. the only software i have left is itunes.exe and file es.lproj which is located in the ituneshelpresources folder

I cant uninstall my itunes off my computer, i have followed instructions and i still have errors, including error 2330 and redundance cyclic. the only software i have left is itunes.exe and file es.lproj which is located in the ituneshelpresources folder. i recently installed a second hard drive and that let me uninstall everything. I just want to get itunes off my computer and reinstall itunes, i have deleted everything i can and i ran "chkdsk" this did nothing. I would have just updated the oild itunes to the newest version but it didnt ley me do that. installing/ uninstalling or deleting just lets me get half way and shows me these errors. Please help, thank you.
JPHowarth

the only software i have left is itunes.exe and file es.lproj which is located in the ituneshelpresources folder.
If the chkdsk isn't fixing the damage, and those are the only iTunes that can't be deleted, try renaming the "iTunes" folder that they are contained in (in your Program files) to iTunesOLD.
Now try another install. Does it go through without the 2330 this time?

While creatinf Depo dec order VA01 i get error shipping point receivable

while creatinf Depo dec order VA01 i get error shipping point receivable   whent i try to enter the point message i get is shipping cond 02 loading group plant not defined

Dear,
This is config issue.
Please follow following Path to do the setting,
SPRO-- LOGISTIC EXECUTION-- SHIPPING-- BASIC SHIPPING FUNCTION--ASSIGN SHIPPING POINT( DOUBLE CLICK)
and maintain following data,
02 (SC) Loading grp mainatined in Mat. Master(LGrp)   xxxx (Plant ) ur shipping point (PrShp)ur shipping point(MShpPt)
Note: Please make habbit of updating your thread.If isuue has been resolved pls close ur thread,
                    if not then upadate where are you getting stuck
Regards
AJIT K SINGH
Edited by: AJIT K SINGH on Sep 29, 2010 4:13 PM

Facebook JavaScript SDK(al.js) include error

HI All,
I am planning to integrate facebook with my InDesign plugin.
In my plugin I have a button "Share On facebook" clicking it will share a post on user wall.
To achieve this i read faceboook-developer tutorial and download JavaScript facebook SDK from http://connect.facebook.net/en_US/all.js
and saved it locally and try to include this in my code as follows
#include "all.js"
FB.init({ appId: xxxxxxx, status: true, cookie: true, xfbml:true });
But When I ran the above script in ExtendScriptToolkit then it gives compilation error for all.js
I also tried to convert all.js to its binary equivalent by open all.js in extendscripttoolkit and do File > Export As binary but it gives same error.
Please help me to fix all.js compilation issue.
Regards,
Alam

Hi Alam
Because JavaScripts are meant for a specific engines there is no such thing as a JavaScript binary executable on your operating system.
Years ago iI connected InDesign to a server using JavaScript sockets. This was a showcase just to show what is possible. Be sure not to violate the license agreement.
I dont know if that would work for you.
If you where on a Mac there is the possibility to work with applescript. Because applescript runs also on OS X there you could possibly connect InDesign to browser output. I’v never tried that though.
Kind Regards
Dani (from Switzerland)

Webservice Response Attachement Deserialize XOP Include Error

Hello experts,
I am consuming a non SAP Webservice. The response contains a HTML attachment and the XOP Include element can not be interpreted.
The Response:
<ns2:html_content><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:[email protected]"/></ns2:html_content>
The error message in SOAMANAGER:
CL_SXMLP_DATA_ST .. internal error 1001 and error text CX_ST_MATCH_TYPE:XSLT Exception bei Offset 431, XPath soapenv: Envelope...... html_content(1)xop:Incldue(1) Value for type y expected (falut location is 1)
The type y stands for binary (ABAP Type Mapping). The SAP System Release is 700 with level 27.
I need the HTML. What is there to do, so that SAP can interpret the response?
Thanks for the help,
Flavius

Hi Flavius, have you resolve your problem?
maybe you can check oss note 1582187 - Limited support of XOP/MTOM via SOAP
luca

Userexit + include + error message

Hi friends,
Actually, there is a userexit, we created a new include in it, say XXX, now when I try to edit some code in this include. I have a trouble to compile or check the error,
e.g when I wrote this
code:
FORM KOBED_973.
this is not test
ENDFORM.
FORM KOBEV_973.
ENDFORM.
try to compile it gives me error ( cant compile as its
only include ) and when I do activate, it gives msg,
activate object generate successfully,
Any idea, what I can do to see the error messages ?
Regards,
Message was edited by: Shah H

Hi Shah,
GENERATE the main program of the incude. USe the men options UTILITITES -> MAIN PROGRAM and once you get to the main program generate the program it will check all the syntax for you and throw any error if it exists.
How to test a routine, you must check with your functional consultant. A routine can be triggered from different ways like from output, from copy control and many more different ways.
Cheers
VJ
If it helps some points would be nice

Perl include errors

I get include perl errors whenever I try to run a perl script:
Can't locate switch.pm in @INC (@INC contains: /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl .) at ./arch-info.pl line 2.
BEGIN failed--compilation aborted at ./arch-info.pl line 2.
How to fix this?

Try to reinstall Perl. There were some problems before:
pacman -Syf perl

2013 include error

My LabWindows 2009 project includes a .H file from a UIR file and it compiles and runs correctly as expected. I migrated to LabWindows 2010 and then 2012 without issue. However, with LabWindows 2013 the compiler includes a different.H. My UIR is named Control.UIR which created the include file Control.h, but LabWindows 2013 includes
C:\Program Files\National Instruments\CVI2013\sdk\include\control.h instead of the one in my project. The #include statement appears to not care about the first letter being capitalized or not. My work around is rename my UIR and H files to non-conflicting file names. Is there something I am missing?
Thanks.

The key to the problem is that my project has source files in one subfolder and the Control.h file in another folder. The Control.h file is included in the project (listed on the left hand side of the LabWindows/CVI window). LabWindows/CVI 2012 finds the correct Control.h, but LabWindows/CVI 2013 does not.
I created the following simple project to induce the error. Follow these steps in LabWindows/CVI 2012 with the Windows SDK installed:
New project named Test1.prj in an empty folder.
Create a source file named Test1.c with 1 line of code [#include "Control.h"] and put in it in the same folder.
Add it to the project.
Compile the Test1.c file and I get the expected compile errors since it found the control.h files in the SDK folder.
Create an include file named Control.h with one line of code in it [#define ABC 20] and put in it in the same folder.
Compile the Test1.c file and compiles without error as expected.
Now create a subfolder named Source and move the Test1.c file into it.
Replace the Test1.c file in the LabWindows/CVI project to point to the moved file.
Compile the Test1.c file and compiles without error as expected.
LabWindows/CVI 2012 works since it finds the Control.h that is in the project. Now repeat the process in LabWindows/CVI 2013. It fails in step #9 above. Even though the Control.h is part of the project, the compiler appears not to find it if it is not in the same folder as the .C file being compiled.
Nothing is listed in the "Include paths" feature of LabWindows/CVI.
I hope this makes sense.

[Solved] Make'ing C++ project - multiple including error

Hi all,
I've rewritten a makefile for my project in a more "correct" way. Reason was not to recompile everything while debugging (complete rebuild takes about 10 seconds, maybe more). But it led to new troubles - now there are a lot of errors, showing that headers are included many times, despite header guards. In makefile, target "debug" is a new way build, "debug_old" - an old one which builds normally. I don't want the rules for each source file to be written manually.
Is it a problem in the makefile? How it can be corrected?
Makefile:
SOURCES=main.cpp data_types.cpp physics.cpp io.cpp
OBJECTS=$(addprefix obj/,$(SOURCES:.cpp=.o))
EXECUTABLE=bin/ThreadedParticles
DEBUG_FLAGS=-Wall -g -c
DEBUG_FLAGS_OLD=-lboost_thread-mt -Wall -g
LDFLAGS=-lboost_thread-mt
debug: $(SOURCES) $(EXECUTABLE)
$(EXECUTABLE): $(OBJECTS)
g++ $(LDFLAGS) -o $@ $(OBJECTS)
$(OBJECTS): $(SOURCES)
g++ $(DEBUG_FLAGS) -o $@ $<
debug_old:
g++ $(DEBUG_FLAGS_OLD) -o $(EXECUTABLE) $(SOURCES)
$ make -B debug
g++ -Wall -g -c -o obj/main.o main.cpp
main.cpp: In function 'int main(int, char**)':
main.cpp:32:8: warning: enumeration value 'SUCCESS' not handled in switch
main.cpp:32:8: warning: enumeration value 'LINES_LEFT' not handled in switch
main.cpp:32:8: warning: enumeration value 'WRONG_VERSION' not handled in switch
main.cpp:32:8: warning: enumeration value 'FEW_PARTICLES' not handled in switch
main.cpp:34:2: warning: label 'WRONG_VERSION' defined but not used
main.cpp:37:2: warning: label 'FEW_PARTICLES' defined but not used
main.cpp:40:2: warning: label 'LINES_LEFT' defined but not used
main.cpp:42:2: warning: label 'SUCCESS' defined but not used
g++ -Wall -g -c -o obj/data_types.o main.cpp
main.cpp: In function 'int main(int, char**)':
# same warnings as for main.o
g++ -Wall -g -c -o obj/physics.o main.cpp
main.cpp: In function 'int main(int, char**)':
# same warnings as for main.o
g++ -Wall -g -c -o obj/io.o main.cpp
main.cpp: In function 'int main(int, char**)':
# same warnings as for main.o
g++ -lboost_thread-mt -o bin/ThreadedParticles obj/main.o obj/data_types.o obj/physics.o obj/io.o
obj/data_types.o: In function `main':
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../include/c++/4.5.1/exception:64: multiple definition of `main'
obj/main.o:/mnt/data/Coding/Current Projects/ThreadedParticles/main.cpp:9: first defined here
obj/physics.o: In function `main':
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../include/c++/4.5.1/exception:64: multiple definition of `main'
obj/main.o:/mnt/data/Coding/Current Projects/ThreadedParticles/main.cpp:9: first defined here
obj/io.o: In function `main':
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../include/c++/4.5.1/exception:64: multiple definition of `main'
obj/main.o:/mnt/data/Coding/Current Projects/ThreadedParticles/main.cpp:9: first defined here
obj/main.o: In function `main':
main.cpp:(.text+0x109): undefined reference to `prepareWorld(std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, int, tpPhysicsGravity**, tpOutput**)'
main.cpp:(.text+0x157): undefined reference to `tpPhysics::iterationNumber()'
main.cpp:(.text+0x171): undefined reference to `tpPhysics::startThreads()'
main.cpp:(.text+0x17d): undefined reference to `tpOutput::start()'
main.cpp:(.text+0x189): undefined reference to `tpPhysics::stopThreads()'
main.cpp:(.text+0x195): undefined reference to `tpOutput::stop()'
main.cpp:(.text+0x1b5): undefined reference to `tpOutput::start()'
main.cpp:(.text+0x1c1): undefined reference to `tpOutput::stop()'
obj/main.o: In function `tpPhysicsGravity::~tpPhysicsGravity()':
main.cpp:(.text._ZN16tpPhysicsGravityD2Ev[_ZN16tpPhysicsGravityD5Ev]+0x13): undefined reference to `vtable for tpPhysicsGravity'
obj/data_types.o: In function `main':
# same "undefined reference" as for previous
obj/physics.o: In function `main':
# same "undefined reference" as for previous
obj/io.o: In function `main':
# same "undefined reference" as for previous
collect2: ld returned 1 exit status
make: *** [bin/ThreadedParticles] Error 1
Last edited by Kosmonavt (2010-11-30 08:16:56)

Situation is the following: there are also physics.hpp, io.hpp and data_types.hpp. main() is declared only in main.cpp one time, also not used by any classes/functions. It was surprising for me, since debug_old build normally, only warnings about enum are printed.
data_types.hpp:
#ifndef DATA_TYPES_HPP_INCLUDED
#define DATA_TYPES_HPP_INCLUDED
#include <valarray>
#include <vector>
#include <cmath>
// Common typedefs and (maybe) data types
typedef std::valarray<double> vector3;
typedef std::vector<vector3> vector_array;
typedef std::vector<double> d_array;
// Defining square of vector length
double norm( vector3 v );
#endif // DATA_TYPES_HPP_INCLUDED
io.hpp:
#ifndef IO_HPP_INCLUDED
#define IO_HPP_INCLUDED
#include <fstream>
// #include <boost/thread.hpp>
#include <string>
#include <sstream>
#include "data_types.hpp"
#include "physics.hpp"
// *** Output facility ***
class tpOutput
public:
tpOutput(std::string filename, int version, int skip, tpPhysics* physsystem);
~tpOutput() { }
void start();
void stop();
private:
std::ofstream outputFile;
// boost::thread outputWorker;
int skipSize;
int versionNumber;
tpPhysics* physSystem;
void writeResults();
void writeTableHeader();
void writeVersion();
void writeSettingOverview();
// *** Input facility ***
enum prepareError { SUCCESS, LINES_LEFT, WRONG_VERSION, FEW_PARTICLES };
prepareError prepareWorld( std::string settingFileName, std::string outputFileName, int worker_num, tpPhysicsGravity** world, tpOutput** log );
namespace input
int parseSettings( std::ifstream& fin, long int& part_num, long int& iter_num, double& delta_t, int& skip, std::string& desc );
// 0 - if incompatible at all, nonzero - number of setting file ID
// for Ver2 setting file
void readParticleData_2( std::ifstream& fin, d_array& m_range, d_array& c_range, d_array& v_range );
// for coord/velocity, lower values are in 0-2,
// higher - in 3-5
// for Ver1 setting file; to be called for every particle in list
void readParticleData_1( std::ifstream& fin, double& m, vector3& c, vector3& v );
// Getting CSV key values
void getKey( std::ifstream& f, long int& result );
void getKey( std::ifstream& f, double& result );
void getKey( std::ifstream& f, int& result );
#endif // IO_HPP_INCLUDED
physics.hpp:
#ifndef PARTICLES_HPP_INCLUDED
#define PARTICLES_HPP_INCLUDED
#include <boost/thread.hpp>
#include <boost/shared_ptr.hpp>
#include <cmath>
#include <vector>
#include <valarray>
#include <cstdlib>
#include <ctime>
#include <iostream>
#include "data_types.hpp"
// General-purpose constants and types
const double G = 6.673e-11;
// *** Physics facility ***
class tpPhysics
public:
tpPhysics( long int iter_num, long int part_num, double delta_t, int worker_num );
~tpPhysics() { }
void startThreads();
void stopThreads();
void addParticle( double m, vector3 c, vector3 v );
void generateParticles(d_array m, d_array c, d_array v);
void getPreviousState( long int num, double& m, vector3& c, vector3& v );
long int iterationNumber();
long int particleNumber();
double dt();
long int showTime();
protected:
void setWorkers(int worker_number);
// 1st set of parameters
vector_array coords_1;
vector_array velocity_1;
d_array mass_1;
// 2nd set of parameters
vector_array coords_2;
vector_array velocity_2;
d_array mass_2;
void setCurrentState( long int num, vector3 c, vector3 v );
void setCurrentState( long int num, double m, vector3 c, vector3 v );
void nextStep();
// Common parameters
const long int iterNumber;
const long int partNumber;
const double deltaT;
long int current_time;
int which_set; // 1 - if 1st set is current, 2 - if 2nd set is current
// Threading data
std::vector<long int> boundaries;
std::vector<boost::shared_ptr<boost::thread> > workerArray;
int workerCount;
virtual void singleCalculator(int lower, int higher) = 0;
class tpPhysicsGravity : public tpPhysics
public:
tpPhysicsGravity( long int iter_num, long int part_num, double delta_t, int worker_num )
: tpPhysics(iter_num, part_num, delta_t, worker_num) { }
~tpPhysicsGravity() { }
protected:
void singleCalculator(int lower, int higher);
#endif // PARTICLES_HPP_INCLUDED

JSP "include" errors ("Identifier not found") Workaround? Fix?

Hi Folks,
I have inherited a large and reasonably horrible web-based Java application. Historically I'm a C++ programmer, but did about 6 weeks worth of java 12 years ago (apparently that makes me a java programmer to my boss?), so while I'm an experienced developer, I'm very much a beginner at Java.
Whenever I compile, I get several hundred errors. These are all of the "Identifier <variable name> not found" type.
The reason I'm getting these errors is that the guy that originally wrote the application often breaks a single webpage into multiple JSP pages. For example:
ParentPage.jsp:
<%
MyClass MyVar = MyOtherClass.GetMyClassInstance();
%>
<table>
<tr>
<td>Some Content Here</td>
<td>Some More Content Here</td>
</tr>
<tr>
<@ include file="ChildPage.jsp"%>
</tr>
</table>
ChildPage.jsp:
<%
String MyString = MyVar.GetSomeStringData();
%>
At runtime the above code is fine, however, when I compile the project in JDeveloper, I of course get an error on line 2 of ChildPage.jsp saying "Identifier MyVar not found"
Does anyone have any suggestions? Unfortunately, a wholesale rewrite of code is not allowed, but anything short of that is certainly on the table!
Many Thanks,
Riv

When you are using include directive static inclusion is taking place. So at the time your parent page translation takes place the included page to will be taken into account and considered as the same. So the variable that you declared at the top will be accessible inside the included page too. But if you compile the included file separately, definitely variable not found error will be thrown as no declaration inside there.

VA01 Price Condition error

Hi Gurus,
I am new in SD. I have already configurated sd module. i created a sales order in VA01 t.c. I can proceed to enter data and
save as complete document in that t.c. But when i look at the condition tab, nothing is there. All is empty. When i try to enter data manual such as CnTy, it does not let me to proceed. It gives error.
Can you please manage me to solve the problem. Thanks.

Hello,
I am new in SD. I have already configurated sd module. i created a
sales order in VA01 t.c. I can proceed to enter data and
save as complete document in that t.c. But when i look at the condition
tab, nothing is there. All is empty. When i try to enter data manual such
as CnTy, it does not let me to proceed. It gives error.
Can you please manage me to solve the problem. Thanks.
Welcome to SDN forum !!
There can be many reason of Pricing condition not displaying at the Sales Order level. From your thread, i could sense that you have configured a new pricing procedure for the Sales transaction. In order to trace out the exact issue, please go to the item level ---> condition tab and there is a button called "ANALYSIS", press that to check the real reason for discrepancies for pricing conditions.
When you enter a condition type that is not defined in the Pricing procedure then you shall get error saying that "Condition XXXX is missing in pricing procedure XXX Message no. V1206"
or
When you input a condition type for which Automatic calculation procedure has high priority then manual entries will be prevented giving out an error !!
Hope this gives you some idea on the approach of making root cause for the issue.
Regards,
Sarthak

Action Script including error

Hi all,
i'm working on flex 3 learning step by step.
Anycase here a found a strange problem. I've done a .as with
all the function i need and a mxml working on it, that include the
.as.
Well the mxml does not include really the action script file.
I tried many ways but nothing.
That's the simple sintax
<mx:Script source="FileName.as" />
I create a button in the mxml file that recall a function
(asubmit) in the "FileName" action script file, here the error:
Severity and Description Path Resource Location Creation Time
Id
1180: Call to a not defined metod asubmit. FileName.mxml line
9 1206624023951 74
I can't understand where it's the error...all the sintax look
good.
Thanks
EDIT:
Hi,
found it.
Tag error on Action script file... -_-"
Thx
u can close.

Hi all,
i'm working on flex 3 learning step by step.
Anycase here a found a strange problem. I've done a .as with
all the function i need and a mxml working on it, that include the
.as.
Well the mxml does not include really the action script file.
I tried many ways but nothing.
That's the simple sintax
<mx:Script source="FileName.as" />
I create a button in the mxml file that recall a function
(asubmit) in the "FileName" action script file, here the error:
Severity and Description Path Resource Location Creation Time
Id
1180: Call to a not defined metod asubmit. FileName.mxml line
9 1206624023951 74
I can't understand where it's the error...all the sintax look
good.
Thanks
EDIT:
Hi,
found it.
Tag error on Action script file... -_-"
Thx
u can close.

How to activate screen fields of VA01 after an error displayed

Hi
I have an issue working with USEREXIT_CHECK_VBAK, which affects transactions VA01, VA02 and VA03.
I have written the logic to validate the combination of Sold-To and Ship-To, against the Partner Table KNVP, under USEREXIT_CHECK_VBAK. And, if a user enters wrong combination of Sold-To and Ship-To, say in transaction VA01, USEREXIT_CHECK_VBAK will be triggered and the validation error message will be displayed. So, once the error is displayed, all the fields available on the screen are getting inactive. The requirement I have is that, after the error message is displayed, both the Sold-To and Ship-To fields should be ready for input again by the user, and the error should be displayed each time user enters wrong combination, but the fields should always be ready for input.
I have tried working with USEREXIT_FIELD_MODIFICATION, to no avail.
Could anyone help on this, or give me an idea on how this requirement could be achieved.
It's urgent.

You can try it with warning message instead of error message.
Or else have a lok at below link which gives the details of VA01 exits so that u can find out the corresponding exit where you can make the changes.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Powerbook G4 "Freezes" I have included error log

*Hello all*, I have a 1.5Ghz 1.5 ram 15" Powerbook G4 that randomly freezes. I know many are knowledgeable here. I receive the dimmed screen with a error notice to use the power button to turn off computer, no options given. I purchased this machine on Ebay with included Tiger disks. I have performed two clean installs to no avail. I have included the most recent error log below. Three possible related issues are the 1. ical doesn't show current date in Dock (July 17) which from discussion boards doesn't seem related. ps I have done all the suggestions to no avail. 2. Widget icon in Dock shows "on" with small black triangle, but is not selected, which doesn't seem right, however finder stays on or activated too maybe a Tiger thing.... 3. The 1 Gig of ram is 3200 at 400mhz but this seems a non issue as it will clock at the prescribed 333mhz. and shows OK.
To resolve I have re-installed, repair disk option and manually ran the daily, weekly and monthly processes with Terminal. I hope I have given you all the facts needed. Thanks For Your Efforts. PS would Leopard be the only answer at 150.00 ish and or new Crucial 2 Gig of proper pc2700 ram?
SODIMM0/J25LOWER:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
SODIMM1/J25UPPER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
Tue Mar 9 10:11:21 2010Unresolved kernel trap(cpu 0): 0x300 - Data access
DAR=0x000000006099F534 PC=0x00000000003005F0
Latest crash info for cpu 0:
Exception state (sv=0x3D281A00)
PC=0x003005F0; MSR=0x00009030; DAR=0x6099F534; DSISR=0x40000000; LR=0x003005CC; R1=0x22023C10; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x003005CC 0x002CF238 0x002CEC5C 0x002CECAC 0x002EDBC8 0x0008DEC4
0x00029234 0x000233F8 0x000ABEAC 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3D281A00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x39B22780)
PC=0x9000AF48; MSR=0x0000D030; DAR=0x00343F20; DSISR=0x40000000; LR=0x9000AE9C; R1=0xBFFFF3D0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x3D281A00)
PC=0x003005F0; MSR=0x00009030; DAR=0x6099F534; DSISR=0x40000000; LR=0x003005CC; R1=0x22023C10; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x003005CC 0x002CF238 0x002CEC5C 0x002CECAC 0x002EDBC8 0x0008DEC4
0x00029234 0x000233F8 0x000ABEAC 0x00000000
Exception state (sv=0x39B22780)
PC=0x9000AF48; MSR=0x0000D030; DAR=0x00343F20; DSISR=0x40000000; LR=0x9000AE9C; R1=0xBFFFF3D0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

Tiger 10.4.11 is a very stable operating system, well suited to a 1.5Ghz 1.5GB Powerbook. Your system has the horsepower to run Leopard fine, although it's possible you may want to max out the memory at 2GB at some point, depending on the work you do on the system. I wouldn't move to 10.5 because I thought it would be more stable, rather, a move to 10.5 might be called for since some new/upgrade software products are starting to require 10.5 as the minimum operating system (that's why I upgraded).
For Leopard, here are some sources. The ebay listing is currently $52 with 17 hours to-go. Be careful you don't buy a gray systems disk for another mac system, like an iMac or MacBook, as those won't load on a Powerbook since they are locked to the system type they were shipped with. Stick with the black retail disks, which includes the upgrade DVD that shipped as an extra DVD with the early Leopard systems. It requires you have Tiger installed, and does the complete install from there.
http://www.buycheapr.com/us/result.jsp?ga=us2&q=macleopard10.5
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120538949513
I did look up where I bought my 10.5 upgrade from, and they want $189.

Va01 MV45AFZZ include error

Similar Messages

Maybe you are looking for