VA02 and VF02 User Exit - entering transaction
Hi all,
I am trying to find a user exit that will be called when the user opens a document.
For example the user types in VA02 and enters the sales order number. When they press enter, the user exit is called.
Can someone tell me which user exit can be used for VA02 and VF02 (or how to find it)?
Thanks,
Following are the BADI's called while opening a sales document in VA02.
<BADI farm removed by moderator>
Following are the user exits called while opening a sales document in VA02
<exit farm removed by moderator>
Moderator message: please reply with specific information only, not a long list of technical objects that might or might not help.
Edited by: Thomas Zloch on May 20, 2011 9:28 AM
Similar Messages
-
User Exit for Transaction V/76
Hello Gurus,
I'm looking for user exit for transaction V/76, Basically I just need to add an additional checking for the value entered in the product hierarchy using a check table (custom table) functionality. However I can't see any user exit that can be used since this is a view maintenance table/transaction. Can anyone of you experts can confirm that there is user exit for this transaction? If YES, I will continue my searching if there is NO then thanks for the confirmation. Thank you very much in advance!
Best regards -Hi Rous,
Please paste this code and check:
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Hope this helps you, reply for queries.
Regards,
Kumar. -
Process to find user exit for transactions /sapapo/snptlb or /sapapo/sdp94
Hi All,
Can you help me out with the approach to find out user exits for transactions /sapapo/snptlb or /sapapo/sdp94?
What I am looking for is the approach, i mean how to proceed with?
Win full points for detailed answer !!
Thanks a lot - ChandanHi Chandan - this is the same as in any module of SAP:
1) check SPRO
If nothing is found then do the following:
1) Goto SE24 and display class cl_exithandler
2) Enter method GET_INSTANCE and create a break point at Line 25 (CASE sy-subrc)
3) Execute SAP standard transaction and invoke the process for which you need to create custom coding
4) Your break point will stop the process in debug mode - check the values of variable 'exit_name', it will contian the name of the BADI currently being executed.
5) Continue to debug by pressing F8 to see other BADI's
6) Repeat steps 3 thru 5 for each process that you want to find a BADI for
Regards
Andy -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
USer exit for transaction Code APPCHANGE
I want to include a function module to trigger a workflow
in a user exit related to program
SAPLHRHAP_UI_DOCUMENT_REPORT (transaction Code APPCHANGE.)
The workflow will be triggered when SAVE button is pressed.
Thank your for your helpHere is a program that can be used to find user exits per transaction code.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
* FORM get_data *
form get_data.
select single * from tstc
where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = tadir-devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
endform.
* FORM write_list *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
endform.
Regards,
Rich Heilman -
How to customize SAPlogon so that the user cannot enter transaction code?
I use PFCG to create a role which limit the choices of menu. I create a user and set the role to the user.
I would like to disable or hide the COmmand Field so that the user cannot enter transaction code directly.
Is it possible to do so?
If yes, would anyone show me how?
Any discussion is welcome.anyway you are going to restrict the user authorization vai role, insted of going throught the whole tree to execute the tcode there is shotcut as command line. here you can save much more time for the user insted going through the tree always. there is no harm for the system if you keep the command line option. What and why you think it should be disabled?
Cheers,
-Sunil -
To differentiate in the user-exits what transaction has executed first
Hi,
I have a problem,
For transactions Iw32 y iw34 EXIT_SAPLCOIH_006 user-exit are called up when a maintenance order is updated
from any of two transactions.
I want to differentiate in the user-exits what transaction has executed first (origin) because sy-tcode in both cases contains iw32 ' because IW38 transaction calls UP always to the transaction iw32 for update of a maintenance order.
thank´s
Regards.If that is the case, and the IW32 is begin called from IW38 via some batch input mechanism, then maybe this code will work. You can wrap your code in this IF statement. Here we are saying that we only want to do this when the tcode is IW32 and it is not being called in batch input(call transaction) or called by another program.
if sy-tcode = 'IW32'
and sy-binpt = space
and sy-calld = space.
endif.
Regard,
Rich Heilman -
User exit for transaction FCHR
hello,
is there any user exit for transaction FCHR( online cashed checks)??
thanx in adavance..
regards,
Maya.Maya,
Execute the below prog to know all the user extis available for a paritcular transaction.
"Sab Maya Hi"
Say thanks to SDN.
K.Kiran.
*& Report Zkk9.
REPORT ZKK9.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
User Exit For Transaction F150 (Dunning)
Hi All,
Can any one help me in finding a User Exit for Transaction <b>F150</b> (Dunning).Hello,
Try this one
F150D001
Bye
gabriel -
User exits for transaction VL10B
Hi,
Could anyone please give me the user exit for transaction VL10B.
Regards
KaranHi Karan,
Just check -
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
REWARD!!
Regards,
Ajinkya -
User exit for transaction CK11N
Dear all,
can any body please tell me any user exit for transaction ck11n.
i want to terigger the exit when the save button will be pressed in the ck11n transaction.
i have found one exit "EXIT_SAPLCK21_002" but it is not triggering after save button is pressed.
so please tell me if any other user exit is there to suit my requirement.
thanks
prabhuduttahi,
found the following BADI
check them
COSTINGRUN_CK Edit Costing Run
COST_APPORTION_CK Maint Apportionment Structure Joint Production: Dist Rules
CO_PROD_COSTING_CK Cost Management for Joint Products (Costing, Target Costs)
DATA_EXTENSION_CK For Data Enrichment in Product Costing
DYNPRO_EXTENSION_CK BAdI for Interface Enhancement in Costing
ORDER_COSTING_CK Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK Enables Quantity/Structure Changes in Costing
SUR_STOCK_TRANSF_CK Overhead on Materials with Stock Transfer Between Plants
CK_KALAMATCON2_CI BAdI for CI Fields for Table KALAMATCON2
VALUATION_CK BAdI for Valuation in Product Costing
Regards -
User-exit for transaction co13: PP Order Cancel Confirmation
Hello!
Whether prompt, please,
exist what that user-exit for transaction co13: PP Order Cancel Confirmation?
Thanks,
Anton.Hi Antonio,
Please check this all user exits (SMOD) available for CO13.
CONFPP01 - PP order conf.: Determine customer specific default values
CONFPP02 - PP order conf.: Customer specific input checks 1
CONFPP03 - PP order conf.: Cust. specific check after op. selection
CONFPP04 - PP order conf.: Customer specific input checks 2
CONFPP05 - PP order conf.: Customer specific enhancements when saving
CONFPP06 - PP Order Confirmations: Actual Data Transfer
CONFPP07 - Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 - PS confirmation: Determine customer specific default values
CONFPS02 - PS confirmation: Customer specific input checks 1
CONFPS03 - PS confirmation: Customer specific check after op. selection
CONFPS04 - PS confirmation: Customer specific input checks 2
CONFPS05 - PS confirmation: Customer specific enhancements when saving
CONF0001 - Enhancements in order confirmation
CONFPI01 - Process order conf.: Calculate cust.specific default values
CONFPI02 - Process order confirmation: Customer spec. input checks 1
CONFPI03 - Process order conf.: Cust. spec. check after op. selection
CONFPI04 - Process order conf.: Customer specific input checks 2
CONFPI05 - Process order conf.: Cust. spec. enhancements when saving
CONFPI06 - Process order confirmation: Actual data transfer
CONFPM01 - PM/SM order conf.: Determine cust. specific default values
CONFPM02 - PM/SM order confirmation: Customer specific input checks 1
CONFPM03 - PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 - PM/SM order conf.: Customer specific input check 2
CONFPM05 - PM/SM order conf.: Cust. specific enhancements when saving
Regards,
Ferry Lianto -
Help Needed: User exit for transaction IL01 and IL02
Hi,
First of all I would like to take you through my requirement. The
requirement is: When I try to instal an equipment(EQ) at a functional
location(FL) in SAP, I want to pass on the values of these two
technical objects(EQ,FL) to an external system through SAP XI.
I identified two user-exits for this purpose,
they are ILOM0001 and ILOM0002. I found the first exit (ILOM0001) more
relevant than the other as the exit ILOM0001 is responsible
for 'Additional checks before saving a functional location'. The
function exit for the exit ILOM0001 IS EXIT_SAPMILO0_001.
When I load the transaction IL02 and try to instal an equipment at a
functional location in debug mode nowhere did I notice this function exit.
Please clarify whether this exit is called with a different name
internally or I am looking at a different exit altogether.
Your early response is highly appreciated.
Thanks,
VijaySolved..........
-
In VF02 User exit problem.
Hi All,
I Done enhancement for VF02 transation to update data into one custom tablem,every thing working fine,but problem is when user click flag button in VF02 this user exit will get trigger by that time posting status is 'A'(means not been posted)I required status 'C'(Posted) but I am getting all data to my Custom table except this,pls help me out..
Thanks n regds,
Sree.Hi All,
My user exit triggering when SY-UCOM = ' FKFR'.(When I cllick flag)
and it is comming out side of the transaction and throwing message Invoice saved actually my user exit should trigger here,if I go once again inside and click save button User exit triggering and chaging the posting status,how can i solve this problem Is I need to put any condition for this,rigth now I am using like below
IF SY-TCODE = 'VA02'
and sy-ucomm = 'SICH'.
CALL FUNCTION 'ZSALES_DATA_UPDATE'
EXPORTING
IT_VBELN = vbrk-vbeln .
endif.
Thanks n regds,
Sree. -
VF02 user exit just after saving
Hi,
Please tell the user exit or BADI which will work in VF02 alone. Requirement is, whatever changes have been made for quantity in the document, has to be reflected in the Z table in the background.
Please clarify.
Regards,
Tom Jerry.Hi,
Below are the list of user exit available for billing:-
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
Depending on the number range, table TVFKD is used to set the billing date (country-specific requirments in Italy). USEREXIT_NUMBER_RANGE is automatically deactivated when this user exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented or changed.
User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
USEREXIT_RELI_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAP_AVBPAK
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B):
EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD
After the accounting document is filled in with data, you can use exit 008 to change the document once again.
EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
with regards
Vivek.
Maybe you are looking for
-
I Installed 11.2.0.1 on one machine first, that time sqlplus and everything is working fine. I Installed 10.2.0.1 software on same machine and want to create 10gr2 database. when changing ORACLE_HOME and doing sqlplus getting below error. Any one of
-
SCCM 2007 SP1. Created a silent deployment for AutoCAD 2009, tested it it manually, copied the folder to our package source share, and, setup a package to distibute to the DPT on the site server (package source folder and SMSPKG share both on same d
-
Is it possible to move app's right to left to another screen?
I accidentally moved an app to another screen; left to right; but when I tried to move it back I couldn't reverse the process. Is it possible to move an app from screen to screen right to left?
-
How do I get a Presenter type sidebar menu in a Captivate video?
I have eLearning Suite 2, and want to create a video based on a ppt deck, but with unique branches and navigation depending on which selection you pick in slide 1. I know how to do that. What I want to know is if I can add or if there is a feature th
-
No sound in Windows after boot Camp install
New iMac 5K, have external speakers plugged in, here sound when windows starts, but then no more......control panel shows no issues???