VA02 Internal error in comm. bt configuration and sales doc.GET_CONFIG_MODE

Hi all,
I am on ECC6.0 and get this error. I deleted SD BOM in CS62 and tried opening order in VA02 but no luck; same error: "Internal error in communication between configuration and sales doc.GET_CONFIG_MODE"
I following instruction in notes below (Execute function module)
You must enhance the interface of function module CUKO_DDB_CONFIGURATION_FINISH by import parameter IV_NO_CBASE (reference type C, proposal SPACE, optional).
In Release 4.6C, you must also implement Note 368412.
Appreciate if anyone has other suggestions,
Many thanks,
Hetal

Hello Hetal,
SAP note 900047 describes a possible reason for this error message.
The note also describes how to use report RCU_CHECK_CONFIGURATION (see SAP note 200914) to be able to open the affected sales orders again.
Hope this helps.
Best regards,
Daniela Hukle

Similar Messages

Internal error in communication between configuration and sales document

Hi,
While i am doing VA32 i got this message plz advise me..
Internal error in communication between configuration and sales document
in the form GET_CONFIG_MODE
bit urgent issue..
Regards,
San Rao.

Hi
Pls check the OSS note 836097, which can solve your problem.
In my experience, I can tell you something
When configuration is done, the configuration object is stored in VBAP-CUOBJ for the item. For this CUOBJ, you can find the configuration in the tcode CUTABLEINFO or in tables IBIB, IBIN, IBEXTINST, IBINOBS,IBINOWN,IBST,IBSTREF,IBINVALUES.
If for the order if VBAP-CUOBJ is not available, then it will not be able to get the configuration. The error message in this case is V1 854 of message class V1.
You can search for some other OSS notes also using this error message and the form name.
Also refer to 173726, 174333,175372 and 173664

Configration and sales doc.get_config_mode error

Hi,
while I am trying to release into accounting it give an error "Internal error in communication between
configuration and sales doc.GET_CONFIG_MODE"
"Internal error in communication between configuration and sales doc.GET_CONFIG_MODE
Message no. V1854
Diagnosis
Internal error in communication between configuration and sales document in the form GET_CONFIG_MODE
System Response
The system cannot continue so terminates processing.
Procedure
Inform your system administrator." ( THIS DETAILS I GET IN WHEN I CLICK ON HELP)
Pls advice me on this ASAP.
Thanks ,
Minesh Soenji

HI,
there are a number of SAPNET notes dealing with error V1 854 (eg 1398628, 990436,...) but with different reasons depending on your detailed business case, please check them.
BR Christian

Sales area and sales doc

Hi
how can I configure the system where all sales document type can be allowed for all the sales area. and this means i dont require to assign sales area and sales doc type into OVAZ.

Hi
Yes, you are right.
Check the img activity documentation in SPRO under "Assign Sales area to sales doc types".
Assign Sales Area To Sales Document TypesI
n this menu option, you allocate the allowed order types to each sales area group.
You do not need to make any entries at all if all the sales order types are allowed for each of your sales areas.
If you wish to check allowed sales document types, you must set up common sales areas. This means you must define common sales organizations, common distribution channels and common divisions. If, for example, you have define common divisions, then you must also define common distribution channels and sales organizations.
Regards
Madhu

Unpermitted combination of business object BUS2032 and sales doc. category

Dear all
I try to create a sales document category L (Debit memo request) with the BAPI BAPI_SALESORDER_CREATEFROMDAT2
I get the error message: Unpermitted combination of business object BUS2032 and sales doc. category L
Is there a specific Bapi for creating this sales document?
Herbert

Magic or not, but try something like this
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
EXPORTING
   ORDER_HEADER_IN = lt_order_header_in
   BUSINESS_OBJECT = 'BUS2096'
   WITHOUT_COMMIT = ' '
IMPORTING
   SALESDOCUMENT = l_vbeln
   RETURN = li_return
TABLES
ORDER_ITEMS_IN = lt_order_items_in
ORDER_PARTNERS = lt_order_partners.

Fireworks CS3 - Internal error when save as JPEG and batch mode

Dears,
I am being in trouble for all along these 7 days due to this
error. I hope that someone may help me.
After upgrading to CS3 from Fireworks 8, I am having this
"internal error message" both when the preview for a JPEG export
format is chosen (it works OK when the export format is either GIF
or PNG) and when I work with batch operation.
Everything is OK if I run Fireworks either as "root" user or
as "adminplus" user ("adminplus" is the username of an extra user
with administration privileges I created for testing).
My operating system is MacOsX 10.5.4 and my computer is a
MacBook2,1 (MacBook with Intel Core 2 Duo 2 GHz with 2GB RAM and a
brand new 186,31 GB Hitachi Journaled HFS+ HD with 100GB free).
I tried in many way to get the valuable differences in the
Library files and privileges (looking to many forums, it seems this
may be the cause, also confirmed by the fact that other users works
fine) but I didn't get any special differences.
I tried to trash the preferences but still the error is
present.
I tried with the master temporary file in MacOsX with
terminal command "stat -x $TMPDIR" checked against command "id".
User and privileges were OK but still the "internal error" was
there.
I tried with a simple reinstall for Fireworks CS3 and with a
full reinstall of the full CS3 web standard suite and, moreover,
uninstalling and reinstalling everything.
I also tried with Fireworks 8 which was not removed by the
upgrade and it has the same problems.
May I receive a competent suggestion about how to diagnosis
and solve the problem?
Many thanks,
Carmine

OK. I solved it!
Whoever will have the same problem may ask how I solved. It
is not complicated but it is a long story. I succeed without any
reinstall of operating system as suggested by the ADOBE support, in
case any of the suggestions found everywhere, will give no result.
I will be happy to explain what to do to whoever will need
it.
My very best wishes,
Carmine

Deleting the del doc no and sal doc no..

Dear Friends,
IS there Any Function Module Available for Deleting the Delivery Document and the Sales Document.

Hi!
Have you tried to create a BDC recording (with SM35) to the deletion?
Do you want to delete delivery and sales order without any trace?
Regards
Tamá

BOM and Material Configuration and Sales order..

hi,
in my requirement, i am supposed to create a project automatically based on sales order..
additional requirement is that material components on the project are based on the the selections during the sales order creation
(for example if customer chooses tiles instead of vinyl flooring then materials for tiles will be selected automaticall)
i maintained reference points in my BOM and in the standard network activities.
i also maintained the class and characteristics of the material..
the missing part i believe lies in the dependency being set for the BOM. example:
=if floortype='vinyl' then get BOM_floortype..
how to configure/set up that scenario? i cant seem to find the link between characteristic selection and output of selected BOM.
Thanks in advance.

Dear ramesh,
If it possible...can u explain...regarding
(i also maintained the class and characteristics of the material..
the missing part i believe lies in the dependency being set for the BOM. example:
=if floortype='vinyl' then get BOM_floortype..
how to configure/set up that scenario? i cant seem to find the link between characteristic selection and output of selected BOM.)
Regards
chandra

" Internal error: 500" during line item configuration

We are using IPC with some interface customization and copying by reference.
During line item configuration I've been getting an Internal error: 500
"Internal error: 500 - The item com.sap.spc.remote.client.object.IPCItemReference@3e902a could not be found on the IPC server!"
The internal error has been occuring when adding and configuring mulitple line items.
Process:
--login to IPC server with new quotation
--shopping cart: add and configure first line item (this returns to shopping cart)
shopping cart: add and configure second line item < the internal error 500 occurs after "configure" is clicked
Please help.
Thank you.
-Philipe
The detailed error message is pasted below:
com.sap.spc.remote.client.object.IPCException: The item com.sap.spc.remote.client.object.IPCItemReference@6bbf02 could not be found on the IPC server!
     at com.sap.spc.remote.client.object.IPCException.fillInStackTrace(IPCException.java:120)
     at java.lang.Throwable.<init>(Throwable.java:85)
     at java.lang.Exception.<init>(Exception.java:33)
     at java.lang.RuntimeException.<init>(RuntimeException.java:38)
     at com.sap.spc.remote.client.object.IPCException.<init>(IPCException.java:27)
     at com.sapmarkets.isa.ipc.ui.jsp.action.StartConfigurationAction.doPerform(StartConfigurationAction.java:245)
     at com.sapmarkets.isa.core.BaseAction.perform(BaseAction.java:197)
     at org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
     at com.sapmarkets.isa.core.ActionServlet.process(ActionServlet.java:430)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
     at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:310)
     at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)
     at com.sapmarkets.isa.core.ActionServlet.processActionForward(ActionServlet.java:267)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)
     at com.sapmarkets.isa.core.ActionServlet.process(ActionServlet.java:430)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
     at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:310)
     at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)
     at com.sapmarkets.isa.core.ActionServlet.processActionForward(ActionServlet.java:267)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)
     at com.sapmarkets.isa.core.ActionServlet.process(ActionServlet.java:430)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.FilterChainImpl.runServlet(FilterChainImpl.java:137)
     at com.inqmy.services.servlets_jsp.server.FilterChainImpl.doFilter(FilterChainImpl.java:70)
     at com.tealeaf.capture.LiteFilter.doFilter(LiteFilter.java:98)
     at com.sapmarkets.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:57)
     at com.inqmy.services.servlets_jsp.server.FilterChainImpl.doFilter(FilterChainImpl.java:65)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:135)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:672)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:314)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1288)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)

Dear Raghu,
Thank u for your reply. Accepted that this being a leap year system is picking up 366 days. But February month is already considered in last fiscal year. So my fiscal year is April 2008 - March 2009 which has only 365 days.
So want interest to be calculated on only 365 days.
Kindly let me know the solution.
Thanks & regards,
Ajay

Error in Configuration and End to end monitoring

Hi all,
I am getting error in RWB under configuration and end to end monitoring.
End to end monitoring iam getting
"Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
and under
Configuration
"Cannot read the configuration for the selected domain because the system was unable to connect to the monitoring server (possibly due to incorrect logon data). Error message: Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
Please help me.
Regards
Pradeep P N

Hi,
Have you gone throgh these threads.
Neither the messager server nor the application server can be reached
Error when I click "End-to-End monitoring" in XI runtime workbench
Neither the messager server nor the application server can be reached
Regards
Goli Sridhar

Internal Error 8004, 6964255, 4843886, 4843614. FrameMaker has detected a serious problem and must q

Has anyone experienced the above error message? I always receive this message when I start scrolling through a FrameMaker file. It does not matter if I scroll with the mouse or using the keyboard. When I click OK to this message, FrameMaker immediately shuts down. At times, it corrupts the file on a particular page(s) and continually gives me this message. Most often, I need to recreate these lost pages. Very frustrating and I do not know if it is FrameMaker or a problem with refresh and the graphics card. Help!

I wanted to post this as another thread but at the same time I believe it's related to what's been discussed in this one.
These are my error codes when FM has crashed in my system:
Internal Error: 8004, 8443342, 4459945, 4414681
Internal Error: 8004, 6343116, 8483344, 0
Internal Error: 8004, 6961695, 4843246, 4842974
and others that I thought related to the scrolling thing... however, I installed FreeWheel and the crash happened again as soon as I updated my book to generate my lists. I've had the scrolling issue in past and it's true that at the time the FreeWheel solution was pretty effective. However, this time I really am sort of not knowing what to do about it.
I have FM 8 with the latest patches running on Vista.
I would really appreciate any input that could help me work this out.

Internal Error -2038 Invoice Creation

¡Hi! Help!
I explain my problem
I've created a vb.net 2005 application. Through DI API (SBO 2005 SP 01, patch level 20).
This application, windows forms run, it opens an SBO conection and starts a timer. Every 5 secconds the timer ticks, it
searches for custom xml files containing info needed to create/update Invoices, or Sales Orders. Whenever I find files to
process, the timer stops, documents are processed one after another and then timer continue ticking. I use one Company and
one conection open since the moment the program starts and it remains opened the whole day.
There are two servers. SAP Server, and there's another server (in this server runs my application, here I have just my app
and DI API so it connects to SAP Server) both on same Domain.
Database size is 50 GB, and it grows about 90 - 100 MB every day
The amount of invoices created is about 500/600 daily.
Problem is many times invoices creation are unsuccesfull due to one of the following errors:
OINV.Series , 'Internal error (-2038) occurred' or just OINV.Series , 'Internal error (-2038) occurred'
this makes more difficult to figure out the reason why this happen and moreover how to solve it, because as some or many of
you may know, internal error is not much explict and the causes for this error are very different.
Now, I'm certain Invoice series are OK because the same Invoice creation that fails in one moment, simply is succesfully
created after 2, 3 or even 5 or 6 tries!.
Errors increase a lot at evening, when intensive use of SBO database is taking place. However these errors use to happen
even at morning when few Invoices are created, I mean, not necessarily happen at intensive use.
Invoices are not that large. The biggest are about 10 - 12 lines.
This situation is frustrating both for my customer and myself
Has anyone experienced something similar? is this something about sbo db performance? does anyone knows if there's some kind
of document about Internal error?

Hi Marcel,
I think the first thing I'd check is for deadlocks on the database. Earlier patches of SBO 2005A SP1 are known to have issues in this area (see SAP note 1113543 for an example). It would certainly fit the symptoms you are getting (ie the same document can be created without errors at a different time).
Kind Regards,
Owen

I have installed Adobe Lightroom CC. In the process of launching, a popup appears, that says: "AN INTERNAL ERROR HAS OCCURRED. Cannot create the required folder: /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets." So e

I have installed Adobe Lightroom CC. In the process of launching, a popup appears, that says: "AN INTERNAL ERROR HAS OCCURRED. Cannot create the required folder: /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets." So even though Lightroom CC is installed, it will not launch. What do I need to do to allow it to launch?

The problem was solved today. Here's the full story. I'm a Mac user. At first I installed Lightroom CC on my iMac (desktop). I had this problem so I called Adobe, and was referred to a "special unit" . After about an hour the tech solved it for me ... we did a screen sharing and she took control of my computer for a loooong time. Because of language difficulties, at first I wondered if she knew what she was doing but she eventually solved it. Although she couldn't explain exactly what she was doing, she summarized it by saying "it was a permissions problem." I asked if I would have the same issue later when I installed it on my laptop (Macbook Air). She said probably not.
But I did. The same internal error popup arose on launch and launch did not complete on my laptop. I tried chat but no joy so I eventually called Apple Care. I had noticed that on my laptop (and the iMac for that matter), that there was no Library folder after my user name. The Apple tech explained that the Library folder is actually there but it is hidden because it's very easy for users to do some very nasty things to their computer by going astray while in the Library folder. The folder is actually there, but they hide it. I did remember seeing that the tech helping me with my iMac had typed the work "Library" while she was controlling my computer. Basically she had activated the hidden Library folder so she could open the path that Lightroom was trying to follow to create that "Develop Presets" folder. For some reason, the inability to create that folder in the launch process was preventing launch from being completed. The Apple tech said she didn't actually have to do that and activated the Library folder by use of the Go selection on the menu bar. Anyway, once that complete path was replicated and opened, the next step was to go to the Lightroom Permissions field and add my user name to the user categories already there and enable "read and write" permissions to my user name. Once done, I shut down my laptop, and then rebooted. I launched Lightroom and then boom, voila, heavens to betsy, etc. it launched and suddenly a dismal weekend turned into a great one.
I am not a geek, so I hope this makes some sense. I also hope Lightroom launches again tomorrow and beyond!

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
I am absolutely pulling out my hair over this one!!
PC/Win 7 64bit/Adobe XI/Office 2010
I have tried Uninstalling and re-installing
I have tried using an adobe software removal tool
I have tried modifying the security settings in reader
I've tried running repair on MS Office
If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
If you drag and drop the .pdf onto the desktop, and then open it, it opens.
If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
Hypothesis: Outlook 2010 does not like to open Adobe Reader.
SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.

I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

OMF export failed due to internal error

I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

VA02 Internal error in comm. bt configuration and sales doc.GET_CONFIG_MODE

Similar Messages

Maybe you are looking for