VA05 - Status is showing wrongly- instead of 'C" it is showing as "A"

Dear All,
This is regarding with VA05 List of Sales Orders:
In this report we have one field "Status" where we got options such as
A = Not yet processed
B = Partially Processed
c = Completly Processed.
We got number of Sales Orders completed Invoiced
When we run VA05, all these Sales Orders Status must show as "C" as the Orders are completly processed but the status is showing as "A" thought the Orders are processed completly.
Can anyone suggest me the reason?
Best regards
Amjath

Dear,
This is for coming that your sales order not deliver to billing.
Please check there is any item pending for delivery in sales order.
Regards,
Sandip

Similar Messages

Gl balance showing wrongly in Fs10n

Dear all,
We are using 6.0 version. I got one issue from my client in which one of GL balance open amount showing wrongly
The gl account open balance showing 8500/- but when we double click on that it showing 7200/-.we did not carry forword the balace to 2008.
I have carry forwarded the gl balance again to 2007.But its showing wrongly.can any one help me to solve this one
Thanks in advance
srinivas
Edited by: sandhati srinivasa rao on Jun 19, 2008 8:24 AM

Hi,
You should c/f the balances to year 2008 (the current year being used) using FAGLGVTR - Balance Carryforward (New) . Unless you C/f balances the said problem will remain.This should solve your problem.
Take care..
Rgds,
KJU

Showing wrong status in sales order

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
      Material                     Qty
p-100                   10
p-101                10
p-102               10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material          quantity
p-100          20
p-101                  10
p-102          20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material                     quantity
p-100                       10
p-102          10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material     quantity
p-100     10
p-101   10
p-102     10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest me

Hi,
Check the code written in the user exit if anythingis going wrong there.
First pull the data till PSA and try to check if correct data is coming till PSA.If that is the case try to debug the update from PSA to target and check the values of the field where xactly it is getting changed.
Do u have any transformation in the BI side?
Please feel free to get back...
Regards,
Abhsihek

Leave status showing 'executed' instead of 'approved'.

Hi Friends
Recently i created half day maternity leave,when employee is applying leave through his ESS, after his managers approval status showing executed instead of approved in ESS.Please could you help me where can i change the status of the leave from executed to approved.Please need your help at the earliest.
thanking you
bhoomika

Dear,
This is for coming that your sales order not deliver to billing.
Please check there is any item pending for delivery in sales order.
Regards,
Sandip

VM2.2 manager page shows wrong status "Shutting down" for VM Guest

Hi,
VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
Any information on How to correct the status in VM manager page?
Thank you.

I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
To solve this problem, change the status manually as follows:
1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
export ORACLE_SID=XE
$ORACLE_HOME/bin/sqlplus / as sysdba
SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
SQL> commit;
SQL> quit
vm_name refers to the virtual machine name.
5.Retry your operation, or delete the virtual machine directly.

PCR "Status overview" showing wrong status

Hi,
We are implemeting Personnel Change Requests using Adobe forms. Our approval processes are working fine. But the status overview link in the "Personnel Change Request" tab shows wrong data. It shows the status as "Open/For Approval" for all PCR's submitted irrespective of the actual status. When i check in Started workflows from Txn:SBWP in R/3 i find that a few of these workflows have actually completed.
Is there any configuration that is to be done to display the correct status? Any inputs on this would be of great help.
Thanks,
Prasath N

Hi Raja,
Thanks a lot for your inputs. Finally i found the issue. I have not set the system status using the task TS50000049 and hence the system the notification remained in "Approval required" status. I was under the impression that this status is set automatically once the approval is completed. Initially when i started the development i had assumed that this task was also used to help in updating the data along with TS50000058. Since we are updating the data in background using certain function modules and BDC's i had removed this step in my custom WF.
I have solved the issue now but still there are some of the questions as given below. Please clarify these if you have any idea on this.
1. There are some hardcoded values like QN44, QN55, PMM4 that are passed to the business transaction. What are these values?
2. How is the system deciding the statuses on these values? Is there a place or table where these business transactions are linked to the Approval texts? 
3. I searched through table TJ01T and found list of business transactions for Notification but i just get an error (in WF log) if i try to use them!!!
Thanks,
Prasath N

Oracle 12c Grid dashboards shows wrong status of target database

Hello Community,
A database in the 12c Cloud control, even if the database target is up, it says it is down. Agent, listeners are also added as target on that particular host. They show correct state where as database target show as down. Database is in 12c. [12.1.0.2.0] I have referred doc.id 1535613.1. That did not help here.
Every time it is showing down with an additional message "got a minus one from read call "
Agent Core version is 12.1.0.3.0
Could you please guide me in this problem?
Kindly let me know if I am giving sufficient information for preliminary investigation or I need to provide some more details.
Regards,
J_DBA_Sourav

Hi ,
Did you try to test the connection?
Target --> MonitoringProperties --> Test
2) Looks like the below link exactly matches your scenario
EM 12c: Running Database Target Status is Down with Enterprise Manager 12c Cloud Control Console Error: GOT MINUS ONE FROM A READ CALL (Doc ID 1984376.1)
Regards
Krishnan

Approval process monitor status turn to "Initiated" instead of "Pending", so awe is not routed

When I submit a transaction, after successful submission in approval process monitor the status has turn "Initiated" instead of "Pending". That's why it's showing "Not Routed" for the next approving person. So that worklist is not populated.
Please suggest me to resolve this issue.
Process Monitor as follows after submission:
Separation Approval Process (Stage)
Initiated (Monitor status)
Approval Routing from Unit HR (Path)
Not Routed    (Step)                                                    Not Routed      (Step)
Multiple Approvers                                                     Multiple Approvers
STATEHR ROLEUSER SEPARATION                              Central Hr
(Userlist)                                                                        (Userlist)

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

IChat shows numbers instead of names for facebook contacts, how to fix?

I just started using iChat for Facebook Chat, but it shows numbers instead of names for most of my contacts.
Is there any workaround for this?
Adium shows names just fine, but I want to use iChat instead.
Thanks!

Hi,
With AIM names there is an Option on the AIM pages to change your Display name. (in your Account Settings)
If you have an AIM Buddy list and stick in my Screen Name (ralphjohnsr) you will notice it displays as Ralph johns R with the Upper case letters and spaces.
I am wondering if FaceBook have done something similar but not everyone has changed (or more likley Facebook are using the "wrong" list or haven't told anyone).
The strange thing is only the two of you have mentioned it so far so there is probably some other explanation.
On the Address Book Front I have added (level 4) to some Buddies that I happen to know via these Apple Forums (under the previous software there were only 5 Levels of posters) when we used to chat using iChat on a more regular basis.
iChat does allow you to Create Nicknames in the Info Card but this Adds them to the Address Book.
(it also has difficulty with lots of Nicknames that are the same such as Dave for David)
It would interesting to know if Adium "Sees" the numbers instead of names. (Or ProteusX if anyone has it)
8:28 PM Thursday; May 12, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Condition rate/Amount (KONV- KBETR) is showing wrongly for Japanse currency

Dear Friends,
The Table data for the Condition rate/Amount (KONV- KBETR) is showing wrongly for Japanse currency(JPY).For ex-The invoice is showing correctly as 3 JPY but the Invoice output shows 300 JPY.This data being fetched from the KBETR shows 300JPY instead of 3JPY.Pl help to resolve this.
Thanks
Isaac

Dear Isaac,
This may due to condition record maintainenance for that condition type in the VK11 transaction so please go to VK12 transaction check the condition value for that condition type.
KBETR -- Means Rate (condition amount or percentage) where no scale exists, it exists in KONP table(Condition record table).
Also Check anybody change the values in the sales order or in invoice from 300 to 3.
I hope this will help you,
Regards,
Murali.

Lenovo Solution Center Showing Wrong Warranty

I bought my Lenovo G500 laptop in December 2013. It has 1 year warranty. Today I installed Lenovo Solution Center and saw that it shows wrong warranty.
According to Lenovo Solution Center, the warranty is set to expire on September 22, 2014. But its wrong since I bought the laptop just around Christmas in 2013.
Solved!
Go to Solution.

Hi Mayank,
Welcome to Lenovo Community Forums!
There was an initial bug in LSC where extended warranty was not accurately shown and this was addressed in version 1.1.006. Several changes to the functionality of warranty lookup have been implemented in different versions of LSC to address other considerations.
In some cases, the Lenovo Solution Center is displaying a message, “Unable to determine warranty”, for the System and displaying a message, “not available”, for the Battery.
This could occur on any Lenovo system running Windows 7 or 8 and running LSC.
These will be solved in version 2.0.018 or higher of LSC.
Warranty status can be checked on the Lenovo support site at any time:
http://support.lenovo.com/en_IN/product-service/warranty-status/default.page?
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can a Quiz show Wrong Answers at End?

I have found tutorials outlining how to make a simple quiz that says if you got the individual question right or wrong.
My client would like to display the wrong answers "AT THE END". Is there something possible along these lines?
Thanks:)

Hopefully never too late to chip in...
You can certainly show the user what they got right and wrong, or only what they got wrong as you see fit, but it is not a simple matter to do. A lot will depend on the length of the quiz, the number of registers you are using to create it and so on. However, in just the same way that you can keep track of how many you scored, you can also create a system that takes you through a number of screens to say what you got wrong.
However, you cannot automatically generate a list of the incorrect answers and present them as a single screen (or menu) unless you have only got a very few questions in total. This is because you need to create a screen for every single possible combination of answers and pick the right one from the whole lot.
Instead, what you do is show a screen saying something like "you got five wrong... click to see them" and then present the viewer with a series of five screens that they can click through to see where they went wrong.
It isn't a straightforward task for anyone who has not scripted a DVD before... but it is possible to do.
How many questions are there in total on your quiz?

Showing wrong year in SAP BEx Workbook

Hi
We've workbook when we're giving filter 001.2014 .. it is picking wrong year.
We can run the report correctly, but year is showing 2013 instead of 2014. Any suggestion.
Thanks

Hi Suman,
This is workbook based on 7-8 queries. please see below screenshots.
please advise what to do so report title will pick 2014 when run using 001.2014 fiscal year period

Aggregate table showing wrong data

Hello Gurus:
I am working on an issue, where a report is showing wrong value for an aggregated fact table.
If I try not including it in query, then results work fine. But by default BI server is pointing to aggregate table ( which it should ).
So my questions are
1) Does Aggregate tables are refreshed automatically with DAC?
2) I know data is wrong in aggregate table. How do I verify?
3) How to make a particular report hit regular table instead of aggregate table?
Please let me know.
Thanks.
~Vinay

Alright. So I made some progress on this issue, HOWEVER it is still not solved.
1) Aggregated tables are refreshed daily with DAC. There is a script for that on server which is created using Aggregate Persistence wizard.
2) ONLY one column is showing wrong data. I have verified this using Toad. However I dont know why is it showing wrong data. Theoretically it should be fine.
3) this question is still same.
How to make a particular report hit regular table instead of aggregate table?
Please help me out.
Thanks.
~Vinay

Discoverer report showing null instead blank

hi,
I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
regards
kumar

hi,
I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
regards
kumar

VA05 - Status is showing wrongly- instead of 'C" it is showing as "A"

Similar Messages

Maybe you are looking for