Vacancy Creation - System is Prompting for Change Request

Hi Gurus,
   I am opening the vacancy for a particular position through T Code - PO13.
   At the time of saving, Pop-Up for Change Request is coming.
   Kindly let me know How to remove this Pop-Up.
    Thanks a Lot in Advance.
Regards,
PKG

In addition to client setting (SCC4) being set at "No changes allowed", software component settings in System Change Option (SE06) should also be maintained correctly. I haven't worked in R/3 environment for years now but from what I recollect, J1ID is a CIN transaction and hence you should have a corresponding software component or namespace object in system change option that could be maintained. I suspect that your current settings say "Restricted Modifiability". You may have to change it to "modifiable".
Also, please note that settings in SE06 do not affect client-specific settings.
Ashutosh

Similar Messages

Prompt for customizing request while saving changes on infotype

I have the problem when I am going to change a employees infotype (e.g. infotype 0001 or 0002) using transaction PA30.
If I want to save this action, the screen appear dialog box: "prompt for customizing request."
Has anyone experienced such a problem? If so, can you please tell me how
did you fix it.
Thanks in advance.
Nils

Hi,
For master data maintenance no need of transport request. Ask your basis people to remove transport request option for master data maintenance. Earlier I faced the similar problem I report basis team and they removed it.

Prompt for Customization Request???

Hi Geeks,
When I Started creating the Company Code. I got a popup screen saying that
"Prompt for customizing Request". what does this screen exactly mean. How to overcome it.
I do have one more question: When I started Activating the Control Area I got a message saying that
"Critical Transport:Control Indicator in Controlling Area". Does this says that the control area is activated?
A detail explanation is well appreciated.
Thanks for your time
Harsh
Moderator: Please, avoid asking basic questions

Hi,
1: System asks you for a customizing request where your entries will be stored for later transportation to other SAP-systems. Maybe you have to create one.
You can't overcome it, you can save your changes in a customizing request that is not transported but than the question is: Why are you creating a new comp. code if you don't want to transport it...
2: The message "Critical Transport:Control Indicator in Controlling Area" means that the control indicator is changed (from non-active to active or vice versa) and such a transport can cause problems in the target system (eg you are deactivating by mistake...).
BR Christian

Problem in View Maintenance - Prompting for a request

Dear Experts,
We have upgraded from 4.6c system to ECC system. i have a table maintenance generator for a Z table. it has been transported across systems ( DEV, QA). now when i try to edit some data in that view using SM30 and saving it...
its prompting for a request in Quality system, whereas in DEV its not asking..
kindly help on this regard.
thanks
Krish

Thanks for the reply..
In both systems the following are the setting in SE54
Transport is in -> Automatic transport
Adjustment is in -> Automatic Adjustment
any othe clues...
Thanks
Krish

Prompt for Customizing request when saving Sales Employee (VPE1)

Hi,
When we try to create Sales Personnel through SD Menu path (VPE1), on saving the system prompts for customizing request. Since this transaction is a master data and we dont transport this data to our production system. Suggest me a way to avoid this transport request while creating Sales Personnel.
We are currently using version 3.1i and upgrading to ECC6.0. In 3.1i we use transaction PAL1 to create Sales Personnel However it will not prompt for Customizing request
Also checked the SAP Note Note 854390 - FAQ: Use of the sales representative in SD without HR
Help me on how to turn off this customizing request. Basis and Security team could not able to turn this off.
Regards,
Pradeep Maddi

hello, friend.
you have 2 choices:
1. create a transport request, save the data but do not release it for transport.
2. when the dialog asks you for transport request, just close this. the system will give you a message about links. just ignore it.
hope this helped. reward if so.
regards.

Email Message contains "select" & "from" word, system will prompt for security right

Hi All,
Is there anyone ever encounter that if the email message is having a "select" & "from" wording, system will prompt for User ID and password?
I had filled up my CRM User ID & Password, and system will still fail to proceed to send the email. Instead, it is showing "Internet Explorer cannot display the webpage" page.
Please help...
Regards,
Desmond Chan

Hi Abhishek,
Thanks again. That's what we suspect. As mentioned, we only have this issue if the email body is having "select...from" wording,
which it looks like SQL statement.
Few days ago we had some changes in out network (MPLS). Now seems the cause maybe from that, as there is no other changes made recently.

SAP user guide for change request management 4.0

Hi,
does anybody know where i can find SAP user guide for change request management 4.0?
Thanks in advance..
MERAL

Hi
You can use this as a reference
Regular corr
https://websmp201.sap-ag.de/~sapidb/011000358700000872582009E/index.htm
Urg corr
https://websmp201.sap-ag.de/~sapidb/011000358700000872612009E/index.htm
Hope it helps
Regards
Prakhar
Edited by: Prakhar Saxena on Oct 15, 2009 10:05 AM

XI: Alerts - Step by step issue " Prompt for customizing request"

I am going through Michal Krawczyk's blog XI: Alerts - Step by step
Michal Krawczyk and between step 4 and step 5 I run up against an issue. I cannot save it because I get a popup saying "Prompt for customizing request" then I click the list button and it says " You can only include objects of this type in customizing requests only" ( a little redundant I must say ) but anyway - the net result is I can't save and lose all the work I just did.
Any help would be greatly appreciated!
Thanks - Andrew

Scott,
I have replied in your another thread for this issue. I request you to please make one thread only so that it will not confuse you and the SDNers.
---Satish

Custom dates for change request

Hi all,
we wanted to have a possibility where we can maintain several (to be defined and must be easily changeable) time estimates on change requests, for example:
u2022     Time estimated for development
u2022     Time spend for development
u2022     Estimated time left for development
I have tried to create a custom date. I got confused with the date rules and the entire procedure. I was not sure whether the procedure is correct or not.
Kindly advice on the exact procedure for creating custom dates for change request.
Regards,
Subhashini.

Hi all,
could anyone guide on this issue pls.
Regards,
Subhashini.

Smartform for change Request

Hi,
i have a problem when a try to send long texts to a smartform. when i fill in the long texts in change request, the program won't make a notification, only a log. i would like to have the long texts in the smartform. could anybody help me with that? or is there a standard smartform for change request?
regards Henk

K usually denotes it is a definition (header). Generally when the transports are released it creates files at the server level. For each request there could be 2 or more files created. K9xxxxx.D11 is the header file, R9xxxxx is the data file, sometimes D9xxxxx is also created for data.
Hope it helps.
-Cheers

Digital signauture for Change Request Mgmt

hi all;
I am trying to incorporate the 'Digital Signature' function in ChaRM. The setup for digital signature or documention was simple. I am trying to incorporate the same for Change Mgmt. I did some basic configuration for Charm in ECR ( hoping it leads to the same)
1. Defined the authorization group
2. defined the signature strategy
3. defined the singnature network
where i am stuck is defining the sigunature network for objectss.Not sure of the right objbect value for change request object.
Any help/documentation/ideas/suggestions are appreciated.
Thanks
ajay

Hi
Can you give some details about "what you found"
it will be helpful to form......
thanks

BO for Change Request(MOC)

Hi,
Can anyone pls help me what is the business object name for Change Request (MOC) in EHS.
Pls help me on this. because i want to add custom field in the screen.
Regards,
Reny Richard

Hi Everyone!
Even we are in the process of configuring change request management at our company, do kindly forward me the essential documents and help material too at [email protected]
However one can get a lot of help from the RKT learning maps on change request management available at SAP Service marketplace, do try out the same.
Anyone already through with the implementation, kindly forward me the step by step procedure with screenshots.
Thanks in advance
Regards
Taj
Message was edited by: Mehjabeen Taj

How to find the workflow for Change Request for the PO's

Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
Sonia

For 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

LSMW recording SM30, prompt for customizing request

Hi everyone,
I'm trying to use lsmw for uploading data into a customizing table. For this I recorded the creation of an entry with transaction sm30. At the end of the recording (when saving) the prompt for a customizing request pops up. When executing the resulting batch input, it get's confused (in my opinion because of the transport request popup in the recording).
Is there a way to prevent the popup?
I've read in a different thread that I can create 1 entry, then do the recording for the lsmw in the same session. This sounds good to me, but I don't see how to do this.
If anybody has an idea how to solve this, it would be great.
Regards,
Monika.

Hi
No u can't prevent that popup, because u're trying to update a customing table: you should considere two main things:
- The call of the request popup can depend on the kind of the client, i.e how the client (dev, test or prod) is set;
- If the cleint is closed, so the modifications are not allowed (for example in production system), your lsmw project can't works.
Anyway by SE11 u can try to create a maitenance view table based on the database table u need to update, leave cutomizing flag and generate the maintenance program (for trx SM30) for this new view: probably now it shouldn't show the popup for the transport (but I'n not sure), if it works u can use it in your project.
It's very hard to manage a table control in LSMW, u can't know how many recodrs u need to update and u can't change the bdc program generated for lsmw.
In this situation the best solution is to insert only one record: i.e. for every record u need to update:
- CALL SM30
- Press NEW ENTRY
- Insert the new record to the top of table control
- Save
- exit
In this way your bdc program doesn't depend on the number of records, as you manage only one record, i.e your project will create a bdc session with as many transaction as many records to be inserted.
Max

No prompt for transport request

Hi
After our upgrade of development we have a problem that the system no longer is prompting for a transport request when you do something like create or change.
We can go in to transport connection and make our own but obviously this is a bit of a pain.
Has anyone else experienced this???
The Dev system is open and set to automatic recording of changes in se06
Andy

Standard SAP programs should be default available in all landscapes(DEV,QA,PROD) you dont want to transport.
However;if you find those program lines do not match across landscapes then some OSS notes,SP could have overwritten ,make sure they are applied across all landscapes in these event.
If at all you find discrepancies ,can create a request so that you can transport it.
goto SE80>Programs>select ur program-->object directory enty from main menu change the owner from SAP to personlized..
Aforementioned steps would be last of my steps..
Hope it Helps
Chetan
@CP..

Vacancy Creation - System is Prompting for Change Request

Similar Messages

Maybe you are looking for