Vacation Message Only Working in Parts

Hi,
I am trying to get a vacation auto-repsonder filter working on the new 10.7.1 server webmail. I've setup two actions. One sends a copy of the recived email to another account, the second action replys to the sender with an out of office message.
The first action works, the second does nothing. Oddly it did work intiially as I have some messages in my email account from the server for the account in question. It doesn't work now though.
I have tried the grey-listing fix but that didn't appear to effect it.
Any ideas?
Francis.

I added the extra identity but it still is not giving the vacation message on the alias just on the original shortname. It is also a bit hard to test, as obviously it only sends one vacation message out per day as a response for a particular sender but i am always trying on the alias email address first and then as a last resort just checking with the shortname email address. I am able to send test email from various different email address's so it does give me a few options for testing.

Similar Messages

Vacation message only working on shortname

We have a 10.6.4 Snow Leopard Server setup and we can setup the Vacation message via the vacation message rules and all works well but it only seems to work when someone sends an email to the users shortname email address e.g. [email protected] and not to any of their aliases like [email protected] Aliasing is working fine for receiving emails on joe, joe.bloggs or joe_bloggs etc.
Anyone else have the same problem or a fix?

I added the extra identity but it still is not giving the vacation message on the alias just on the original shortname. It is also a bit hard to test, as obviously it only sends one vacation message out per day as a response for a particular sender but i am always trying on the alias email address first and then as a last resort just checking with the shortname email address. I am able to send test email from various different email address's so it does give me a few options for testing.

Does messages only work with specific software?

ANSWER.

Welcome to the Apple Support Communities
Messages only works on Mountain Lion. See > http://support.apple.com/kb/HT5395?viewlocale=en_US&locale=en_US

Message only work in sidebar

The message app only works in the sidebar. I could write new messages and reply only in the sidebar.
No overall view, no conversations are available...
The message app didnt work really. All the buttons in the app are grey. I have no option to make settings in the menu.
It works really good till tomorrow.
I already reinstall Yosemite new

Hi Bhaskar,
I have not worked on EWM, and don't know if CIF connectivity is used differently.
But let me try to propose a general way forward based on your error message.
It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
Check out the following:
1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
Let me know the results of your checks, and if this helps you in finding out the root cause.
PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
Thanks - Pawan

Recordsets per message - only works with RECORDSET

I have previously got recordsets per message working when I use RECORDSET. I now have a scenario that uses "row" instead of "RECORDSET".
This is working for RECORDSET - it splits into a new message every 100 records........
Recordset Name   RECORDSET
Recordset Structure   RECORDSET,100
Recordsets per Message   100
ignoreRecordsetName   true
RECORDSET.fieldNames   RECORDCODE,ACCOUNTID,CO..............
RECORDSET.fieldFixedLengths   2,6,1,3,4,3,2,1,.............
RECORDSET.lastFieldsOptional   yes
When I change RECORDSET to be row - it only produces 1 message, even though 11,000 records
Recordset Name   row
Recordset Structure   row,950
Recordsets per Message   950
ignoreRecordsetName   true
row.fieldNames   RECORDCODE,ACCOUNTID,CO..............
row.fieldFixedLengths   2,6,1,3,4,3,2,1,.............
row.lastFieldsOptional   yes
Can anyone tell me what I am doing wrong?

I can't believe there are no examples of these kinds of things because it is all about syntax most of the time in File Content Conversion and this can be so time consuming. I got it to work eventually - hopefully this will save someone a couple of hours. This worked:
Recordset Name row
Recordset Structure row,1
Recordsets per message 950
ignoreRecordsetName true

Autoreply vacation message not working

a user has setup the autoreply within uwc - but it doesn't work. using 2005Q4
# /opt/SUNWmsgsr/sbin/imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS mail 5.9 Generic_118558-21 sun4u sparc SUNW,Ultra-60
doesn't work for messages sent to userid (from internal or external senders), or when a message is sent to user's maileq address.

was able to remedy by adding the following to option.dat:
*^!autoreply=$M+$D@bitbucket
which was missing by default.

Photo messaging only working for iMessage users.

Alright so my phone plan,allows me to photo/video message to any phones, but recently I am only able to send photos/videos to iMessage users. Please help.

Do you have MMS turned aon in settings/messages? IS MMS provisioned for you by your carrier?

Vacation Messages Don't Work After Changing Password

I have a Snow Leopard Server (10.6.2) setup and the vacation message feature works fine as long as the user hasn't changed their password. Once they have changed their password then the feature doesn't work. You can set it up but it doesn't work, when you send an email to the user with the message set the email sends but you don't get the vacation message.
I have also noticed that when you try and load the server side mail rules for a user that has changed their password you get an error (from memory it's something about can't get info from server).
Does anyone know why this might happen.
Thanks

There is a one-response-per-day limit imposed by mailsieve and dovecot. Once a vacation response has been sent to any address, it'll throttle any future responses for 24 hours to the same address.
Once you change the password, are you either using the same address to send e-mail as before? Have you tried triggering the vacation notice from a different sender address?
A.

WSDL with messages consisting of multiple parts

Hi,
I need to create an ABAP client for a Web Service. In the WSDL of the Service I want to call, there are messages consisting of multiple parts like this one:
     <message name="AddOrUpdateSeekersIn">
              <part name="header" element="mh:MonsterHeader"/>
               <part name="catheader" element="cat:CompanyAuthHeader"/>
             <part name="body" element="monster:JobSeekers"/>
     </message>
I've found a document that says this is not supported by the ABAP Proxy Generation wizard.
On the ABAP forum (WS Proxy Generation for WSDL with messages consisting of multiple parts) someone suggested me to ask for advice here on whether I would modify the WSDL so that the message only contains one part. Is this possible and how would I do that?
Thanks,
Tim

Have u ever know the agile way of building messages for SERVICE by reusing data types in XSDS?
When ever u define a Service and Service Operation you have to define Request, Response, Fault messages for EACH Service operation.
A message is not always same as DATA, however a message is the DATA representation in a SERVICE operation context to address the operation Request, Response and FAULT (Exception)
Always try to build the message requirement of a service operation in such a way so that we can reuse the data types.
So during the service requirement analysis, decompose all DATA REKS such a way so that we can build data entities as
atomic data types
composite data types and
canonical data types in a such a way
atomic data types are part of composite data types
and composite data types are part of canonical data types
and canonical data types map to business service operation request and response
composite or atomic data types map to FAULT messages
This way you will have an agile approach to fullfill the data requirement of messages in services context, also can avoid the technology limitation in service enabled platform such as ABAP R3
PS: there might be a other temp solution, but this should be the way we do in SOA practice.
Thanks

Convergence U2 - Options Panel for Vacation Messages

Doesn's seem to do anything. I see the following error in the browser:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)
Timestamp: Mon, 8 Jun 2009 16:33:40 UTC
Message: 'iwc.userPrefs.calendar.firstday' is null or not an object
Line: 20
Char: 150409
Code: 0
We don't have Calendar installed. Does the 'calendar' reference in the error meesage, mean calendar is required to be installed and configured for Vacation Messages to work?

Steve-uw wrote:
Doesn's seem to do anything. I see the following error in the browser:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)Is this Internet Explorer 8? If so this is not a supported browser.
Can you reproduce this problem with a supported browser e.g. IE7/Firefox 3?
We don't have Calendar installed. Does the 'calendar' reference in the error meesage, mean calendar is required to be installed and configured for Vacation Messages to work?Calendar is not required.
Regards,
Shane.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT

Zoom only works on outer parts of photo

Very strange thing happening in LR5.6. When I go to zoom in on an image it only works on the outer 2/3s of the photo. it seems I can't zoom when clicking in the center. Same goes for when it is zoomed and I want to click the centre and drag to move to recenter the photo somewhere else. If I click on the centre it just does nothing. Also I can see that normally when I hover the mouse over the image, it shows the magnifying glass over those outer parts but when I move to the middle it just shows the mouse pointer, and same for when zoomed, the hand icon changes to mouse pointer. Anyone have any ideas what could be wrong?
I am running a brand new iMac on OSX 10.9.4 Mavericks and have the CC version of LR installed and updated. The problem seems to be sporadic so I'm not sure if it's an Apple problem?
AAron

I'm having the same problem with the iWeb 09 Hit Counter on MobileMe. It worked fine until I republished the site under a new name. Now I can't get it to appear no matter what I try (including moving it around in the 150 px footer area. The javascript looks fine in the source code (see below), so I'm wondering if this is an iWeb/MobileMe bug? My hunch is that the javascript call to get the counter is not working correctly on the server end. Here's the code that also shows the proper footer value:
<script type="text/javascript"
src="http://web.me.com/i/chp/NGHitCounter.js"></script><script type="text/javascript"
src="http://web.me.com/rbrisson2/.Counters/63346ED0-8119-49BB-8DE5-8EC27C322A09?webda v-method=propget&counter"></script>
Any help on how to fix this “break” in the javascript call would be appreciated!

Vacation Message Only Working in Parts

Similar Messages

Maybe you are looking for