Vado HD, unable to edit in several programs, no video!

Hi,
what gives I'm using Vista 64bit. I can view video recorded on my Vado HD in windows movie maker, however I see no video when I attempt to edit i
in windows movie maker, Sony Vegas movie studio 8 or Adobe CS4?
I've updated the Vado software but still no video. I get audio fine.
Please help as I'm getting rather mad with this useless video format.
Thanks
Mike

i'm using Sony Vegas Studio Platinum 9, and I initially had trouble too, no video except sound only.
but i installed ffdshow (ffdshow-rev2280_200802_xxl.exe). no problem.
i also use video pad editor (freeware) and super.
[color="#000070">Download SUPER ?setup file, click that and you'll have the download)

Similar Messages

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

I am unable to edit an image in Photoshop.

I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug

Unable to edit Hosts file in Win7 Home Prem 64bit.

Clean install. Administrator account. Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc but there is no etc folder in the drivers folder.
Turned off DNS Server. gpedit.msc not found when calling it in "run". This is the first time I've used 64bit anything, so a bit of a newb in that respect.
Any ideas?

Hi,
As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
worked.<o:p></o:p>
For those users who experience this problem, here are the instructions to fix it.
First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
So, here you go with a correct solution for this problem.
Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
Hence, do not attempt if you are not 100% sure you can make it.
Login to an administrator account.
In the run command (Windows key + R) type, “control folders” and hit enter.
Click on the tab called view.
Select the radio button for Show hidden files, folders and drivers –ON.
Uncheck the ‘Hide extension for known file types-ON
Click on Apply and then OK.
Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
From the “drivers” folder, double click the folder named “etc.”
Now you can see the “host” file along with others.
Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
“Run as Administrator.” If UAC prompted, click YES/OK)
Now, you will have a notepad open with administrative privileges.
At the top left side of the notepad click on “file” and then select “Open.”
A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
Make whatever changes you as you wish. (Example: If you need to block a web site called
www.block123.com you can type 127.0.0.1
www.block123.com right under the local hosts.
Make sure you do not change any other letters or characters which are already saved in host file.
This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
http://support.microsoft.com/kb/972034 . If you
have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
instructions provided above and select etc folder and then save it.
Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
I have provided)
There you can see 2 host files. One which has already been there and the other one you just saved.
Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
file type as ‘Text Document.’
Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
file as “hostold” and hit enter.
Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
“Text Document” to “File” and hit enter.
Now, you have successfully saved the host file with your preferences.
You can now delete the file which we renamed as “hostold.”
We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
few minutes on this.
Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
Should you have any questions, please feel free to ask.

Unable to Edit Photos in iPhoto '11 on when Original is Missing iPhotoDiet

When the Original is missing after running iPhoto Diet, iPhoto '11 is unable to edit the image at all.
This is unlike the behavior of iPhoto '09 and previous versions, which would make the current copy the new "Original".
Can this be fixed by iPhoto or is there an way to manually make new "Originals" based on the current rotated photos?
http://support.apple.com/kb/TA22873?viewlocale=en_US

When the Original is missing after running iPhoto Diet, iPhoto '11 is unable to edit the image at all.
That is correct - you must NEVER make any changes of any sort to the content or structure of the iPhoto library using third party programs that are not fully i{Photo aware and tested - and you certainly should never do any operations on the iPhoto library without a backup
This is unlike the behavior of iPhoto '09 and previous versions, which would make the current copy the new "Original".
iPhoto has NEVER done that to the best of my knowledge - iPhoto diet may have and may not with iPhoto '11 - that is a subject for iPhoto diet support - not iPhoto support
Can this be fixed by iPhoto or is there an way to manually make new "Originals" based on the current rotated photos?
No you must either put the library back exactly like it was, load your backup or start over
http://support.apple.com/kb/TA22873?viewlocale=en_US
What part of this warning did you not see as important?
To prevent this issue:
*Leave the contents of your iPhoto Library folder alone, and allow iPhoto to manage the images as designed.*
Update to iPhoto 5.0.1 or later. This update will prevent the loss of non-RAW images, but it does not eliminate issues with RAW files.
*Minimize the risk of image loss by keeping good backups:*
Export your current library as a backup copy.
*Back up new photos as soon as possible after taking them.*
If you already have good backup habits and copies of all your images outside of iPhoto, then obviously there is no need to export your current library. _*For those of you who haven't been backing up, exporting your current library will start you on the right path.*_
LN

Unable to edit documents after AVG installation

I have a dual drive Toshiba laptop, which has been recntly updated from Vista to Windows 7. Windows 7 has taken up most of my C drive, so I have had to put programs onto the other data E drive. The other day I bought AVG ant-virus 2011 and put it onto my computer (data e drive). Since then, even after taking avg off, I am unable to edit documents on office Word or OpenOffice. it seems to be doing it to my external drive (that I have added) as well as now. Its strange since this only started as soon as i used AVG. Any suggestions what the problem could be? How it can be resolved.
I really need some help, as my computer seems to be slowly dying! Tried to get in contact with AVG but they seem just to be ignoring the problem at the moment.
Thanks for any help,

Hi buddy,
> Its strange since this only started as soon as i used AVG.
In this case I would contact AVG directly if they can say something about this or if its a known issue. I never heard about this but AVG should know what to do now.
I dont know what notebook you have but Im pretty sure its a software issue and it seems to be related to AVG

Unable to edit received PDF with Acrobat 9.3

I have been unable to edit PDF files for some time. I have Acrobat 9.3 and am wondering if I need to purchase the program or is there someithing I can do
to make changes? I have checked the security settings on this particular file and they are:
Print                                            Allowed
Doc assemlby                              Not Allowed
Context coping & for accessibility Allowed
Page extract                                Allowed
Comments                                   Not Alowed
Filling in fields                               Allowed
Any ideas?
Thanks,
Bryan

Hi Bryan,
I'm afraid you're in the wrong forum! This one is for acrobat.com, which is different from Acrobat (I know, very confusing). Here's the link to the forum you're looking for:
http://forums.adobe.com/community/acrobat
Good luck, and I hope the issue gets resolved over there.
-Rebecca

When I download a saved Adobe document I am unable to edit it

When I download a saved Adobe document I am unable to edit it., how do I edit such documents?

Thank you Michael/
Many of my files need periodic updating, which I can do with my Word documents. If I scan a document it is saved as an Adobe document and thus cannot be readily changed. Clearly I need to uninstall my Adobe program.
Bernard Huggins
[private data removed]

Unable to edit Distribution Group membership via Outlook (works via ECP).

SITUATION: I am attempting to enable the ability for specified users to edit the membership of Exchange 2010 distribution groups via Outlook 2010. I have configured permissions via RBAC for them to be able to do this by following the instructions and
running the script found here:
http://msexchangeteam.com/archive/2009/11/18/453251.aspx
After running the script, users specified as group managers are able to edit group membership through the ECP. But when they attempt to do so via Outlook, they receive the same message that they would see if the permission to edit group membership
was not enabled:
"Changes to the public group membership cannot be saved. You do not have sufficient permission to perform this operation on this object."
QUESTION: Does anyone have any idea as to why we are still unable to edit group membership via Outlook, when all the permissions appear to be enabled doing so?

Click Start
Collapse this imageExpand this image
, point to All Programs , point to Exchange Server 2010 , and then click
Exchange Management Shell .
At the command prompt, run the following cmdlet:
New-RoleGroup DistributionGroupManagement -Roles "Distribution Groups"
At the command prompt, run the following cmdlet:
Add-RoleGroupMember DistributionGroupManagement -Member <var>UserName</var>
Open Outlook and try to remove from your distribution list those members that you could not remove before

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?

If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Unable to edit any old entity in Data Modeler

Hi,
I have a strange problem with Data Modeler 2.0.0.584 on Win XP. If you came across similar issue, please let me know how you solved it.
I have a logical model created several weeks ago. I can open the model without any errors, but I am unable to edit any object - when I double click on entity or relationship, the text in the property window is grayed out and I cannot change anything. I cannot change entity properties, nor add/change attributes.
The strange thing is that I can create a new entity or relationship, but once the object is created I cannot edit it.
I have checked that all files in the model folder are set as read/write but it did not solve the problem. At this moment I have no idea what else to check.
Thanks for any suggestion or help.
Regards,
Jakub

Thanks, that works!
- save as into another directory
- close Data Modeler
- start Data Modeler
- open the model from the new location
- and voila! I can edit all the entities!
Jakub

Captivate 4-Unable to Edit or Save a Project

Hi,
I am creating a CBT using Captivate 4. There are two slides so far and the size of the project is 1,901 kb. One slide in the project has six click boxes with multiple actions and has five animations included in it which are hidden until the user clicks a click box. The concept works wonderfully, however, I am now unable to edit or save the project. I cannot finish it at this point. Captivate will not allow me to add any additional buttons, click boxes, highlight boxes, new slides and so on. It also will not allow me to delete any unused items from the library, or save the edits I made up to that point.
I have tried the following, closing the project, closing Captivate and restarting my computer. I have also imported the slides into a new project with the same outcome. I have copied and pasted the slides into a new project with the same outcome. I have also tried to do a save as and it will not allow that either. There are no error messages. The project is not save on the network, it is on my C:Drive. I have had to restart the project several times and has this happened with each project. Any ideas would be greatly appreciated.
Thanks
Wendy

click on the folder containing all these documents and do the following:
Right click on the folder, then select "Get Info"
Click the lock at the bottom to give yourself access to the permissions settings for this folder. A dialog will appear so you can enter your login name and password:
Now select your user name at the bottom (mine is wayne), set the read write permissions to "Read & Write" using the pop-up menu, then click the sprocket at the very bottom of the window and select "Apply to enclosed items..." from the pop-up menu. The click the lock again.
Now try to open your Numbers documents

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

Dear experts,
I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
However, when I try to enter selection I_THX_SEL, it tells me:
Unable to edit the object
Message no. MO704
Diagnosis
You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is an object reference
The object is a hashed table
The object list a string
The object has the type REF TO DATA
The object contains object references
The object contains hashed tables
The object is a string
The object contains strings
A subcomponent of the object has a width that exceeds 65,000 characters.
Can anyone tell me how to make it work?

Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

Vado HD, unable to edit in several programs, no video!

Similar Messages

Maybe you are looking for